Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 149 insertions, 0 deletions

diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h
new file mode 100644
index 000000000..78324502b
--- /dev/null
+++ b/include/scsi/scsi_transport_spi.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* 
+ *  Parallel SCSI (SPI) transport specific attributes exported to sysfs.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ */
+#ifndef SCSI_TRANSPORT_SPI_H
+#define SCSI_TRANSPORT_SPI_H
+
+#include <linux/transport_class.h>
+#include <linux/mutex.h>
+
+struct scsi_transport_template;
+struct scsi_target;
+struct scsi_device;
+struct Scsi_Host;
+
+struct spi_transport_attrs {
+	int period;		/* value in the PPR/SDTR command */
+	int min_period;
+	int offset;
+	int max_offset;
+	unsigned int width:1;	/* 0 - narrow, 1 - wide */
+	unsigned int max_width:1;
+	unsigned int iu:1;	/* Information Units enabled */
+	unsigned int max_iu:1;
+	unsigned int dt:1;	/* DT clocking enabled */
+	unsigned int qas:1;	/* Quick Arbitration and Selection enabled */
+	unsigned int max_qas:1;
+	unsigned int wr_flow:1;	/* Write Flow control enabled */
+	unsigned int rd_strm:1;	/* Read streaming enabled */
+	unsigned int rti:1;	/* Retain Training Information */
+	unsigned int pcomp_en:1;/* Precompensation enabled */
+	unsigned int hold_mcs:1;/* Hold Margin Control Settings */
+	unsigned int initial_dv:1; /* DV done to this target yet  */
+	unsigned long flags;	/* flags field for drivers to use */
+	/* Device Properties fields */
+	unsigned int support_sync:1; /* synchronous support */
+	unsigned int support_wide:1; /* wide support */
+	unsigned int support_dt:1; /* allows DT phases */
+	unsigned int support_dt_only; /* disallows ST phases */
+	unsigned int support_ius; /* support Information Units */
+	unsigned int support_qas; /* supports quick arbitration and selection */
+	/* Private Fields */
+	unsigned int dv_pending:1; /* Internal flag: DV Requested */
+	unsigned int dv_in_progress:1;	/* Internal: DV started */
+	struct mutex dv_mutex; /* semaphore to serialise dv */
+};
+
+enum spi_signal_type {
+	SPI_SIGNAL_UNKNOWN = 1,
+	SPI_SIGNAL_SE,
+	SPI_SIGNAL_LVD,
+	SPI_SIGNAL_HVD,
+};
+
+struct spi_host_attrs {
+	enum spi_signal_type signalling;
+};
+
+/* accessor functions */
+#define spi_period(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->period)
+#define spi_min_period(x) (((struct spi_transport_attrs *)&(x)->starget_data)->min_period)
+#define spi_offset(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->offset)
+#define spi_max_offset(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_offset)
+#define spi_width(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->width)
+#define spi_max_width(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_width)
+#define spi_iu(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->iu)
+#define spi_max_iu(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->max_iu)
+#define spi_dt(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->dt)
+#define spi_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->qas)
+#define spi_max_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->max_qas)
+#define spi_wr_flow(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->wr_flow)
+#define spi_rd_strm(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rd_strm)
+#define spi_rti(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rti)
+#define spi_pcomp_en(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->pcomp_en)
+#define spi_hold_mcs(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->hold_mcs)
+#define spi_initial_dv(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->initial_dv)
+#define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending)
+
+#define spi_support_sync(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_sync)
+#define spi_support_wide(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_wide)
+#define spi_support_dt(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_dt)
+#define spi_support_dt_only(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_dt_only)
+#define spi_support_ius(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_ius)
+#define spi_support_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_qas)
+
+#define spi_flags(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->flags)
+#define spi_signalling(h)	(((struct spi_host_attrs *)(h)->shost_data)->signalling)
+
+
+
+/* The functions by which the transport class and the driver communicate */
+struct spi_function_template {
+	void	(*get_period)(struct scsi_target *);
+	void	(*set_period)(struct scsi_target *, int);
+	void	(*get_offset)(struct scsi_target *);
+	void	(*set_offset)(struct scsi_target *, int);
+	void	(*get_width)(struct scsi_target *);
+	void	(*set_width)(struct scsi_target *, int);
+	void	(*get_iu)(struct scsi_target *);
+	void	(*set_iu)(struct scsi_target *, int);
+	void	(*get_dt)(struct scsi_target *);
+	void	(*set_dt)(struct scsi_target *, int);
+	void	(*get_qas)(struct scsi_target *);
+	void	(*set_qas)(struct scsi_target *, int);
+	void	(*get_wr_flow)(struct scsi_target *);
+	void	(*set_wr_flow)(struct scsi_target *, int);
+	void	(*get_rd_strm)(struct scsi_target *);
+	void	(*set_rd_strm)(struct scsi_target *, int);
+	void	(*get_rti)(struct scsi_target *);
+	void	(*set_rti)(struct scsi_target *, int);
+	void	(*get_pcomp_en)(struct scsi_target *);
+	void	(*set_pcomp_en)(struct scsi_target *, int);
+	void	(*get_hold_mcs)(struct scsi_target *);
+	void	(*set_hold_mcs)(struct scsi_target *, int);
+	void	(*get_signalling)(struct Scsi_Host *);
+	void	(*set_signalling)(struct Scsi_Host *, enum spi_signal_type);
+	int	(*deny_binding)(struct scsi_target *);
+	/* The driver sets these to tell the transport class it
+	 * wants the attributes displayed in sysfs.  If the show_ flag
+	 * is not set, the attribute will be private to the transport
+	 * class */
+	unsigned long	show_period:1;
+	unsigned long	show_offset:1;
+	unsigned long	show_width:1;
+	unsigned long	show_iu:1;
+	unsigned long	show_dt:1;
+	unsigned long	show_qas:1;
+	unsigned long	show_wr_flow:1;
+	unsigned long	show_rd_strm:1;
+	unsigned long	show_rti:1;
+	unsigned long	show_pcomp_en:1;
+	unsigned long	show_hold_mcs:1;
+};
+
+struct scsi_transport_template *spi_attach_transport(struct spi_function_template *);
+void spi_release_transport(struct scsi_transport_template *);
+void spi_schedule_dv_device(struct scsi_device *);
+void spi_dv_device(struct scsi_device *);
+void spi_display_xfer_agreement(struct scsi_target *);
+int spi_print_msg(const unsigned char *);
+int spi_populate_width_msg(unsigned char *msg, int width);
+int spi_populate_sync_msg(unsigned char *msg, int period, int offset);
+int spi_populate_ppr_msg(unsigned char *msg, int period, int offset, int width,
+		int options);
+int spi_populate_tag_msg(unsigned char *msg, struct scsi_cmnd *cmd);
+
+#endif /* SCSI_TRANSPORT_SPI_H */