Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 180 insertions, 0 deletions

diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h
new file mode 100644
index 000000000..2df54cf02
--- /dev/null
+++ b/include/sound/dmaengine_pcm.h
@@ -0,0 +1,180 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ *  Copyright (C) 2012, Analog Devices Inc.
+ *	Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#ifndef __SOUND_DMAENGINE_PCM_H__
+#define __SOUND_DMAENGINE_PCM_H__
+
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <linux/dmaengine.h>
+
+/**
+ * snd_pcm_substream_to_dma_direction - Get dma_transfer_direction for a PCM
+ *   substream
+ * @substream: PCM substream
+ *
+ * Return: DMA transfer direction
+ */
+static inline enum dma_transfer_direction
+snd_pcm_substream_to_dma_direction(const struct snd_pcm_substream *substream)
+{
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		return DMA_MEM_TO_DEV;
+	else
+		return DMA_DEV_TO_MEM;
+}
+
+int snd_hwparams_to_dma_slave_config(const struct snd_pcm_substream *substream,
+	const struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config);
+int snd_dmaengine_pcm_trigger(struct snd_pcm_substream *substream, int cmd);
+snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream);
+snd_pcm_uframes_t snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream *substream);
+
+int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream,
+	struct dma_chan *chan);
+int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream);
+
+int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
+	dma_filter_fn filter_fn, void *filter_data);
+int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream);
+
+struct dma_chan *snd_dmaengine_pcm_request_channel(dma_filter_fn filter_fn,
+	void *filter_data);
+struct dma_chan *snd_dmaengine_pcm_get_chan(struct snd_pcm_substream *substream);
+
+/*
+ * The DAI supports packed transfers, eg 2 16-bit samples in a 32-bit word.
+ * If this flag is set the dmaengine driver won't put any restriction on
+ * the supported sample formats and set the DMA transfer size to undefined.
+ * The DAI driver is responsible to disable any unsupported formats in it's
+ * configuration and catch corner cases that are not already handled in
+ * the ALSA core.
+ */
+#define SND_DMAENGINE_PCM_DAI_FLAG_PACK BIT(0)
+
+/**
+ * struct snd_dmaengine_dai_dma_data - DAI DMA configuration data
+ * @addr: Address of the DAI data source or destination register.
+ * @addr_width: Width of the DAI data source or destination register.
+ * @maxburst: Maximum number of words(note: words, as in units of the
+ * src_addr_width member, not bytes) that can be send to or received from the
+ * DAI in one burst.
+ * @filter_data: Custom DMA channel filter data, this will usually be used when
+ * requesting the DMA channel.
+ * @chan_name: Custom channel name to use when requesting DMA channel.
+ * @fifo_size: FIFO size of the DAI controller in bytes
+ * @flags: PCM_DAI flags, only SND_DMAENGINE_PCM_DAI_FLAG_PACK for now
+ * @peripheral_config: peripheral configuration for programming peripheral
+ * for dmaengine transfer
+ * @peripheral_size: peripheral configuration buffer size
+ */
+struct snd_dmaengine_dai_dma_data {
+	dma_addr_t addr;
+	enum dma_slave_buswidth addr_width;
+	u32 maxburst;
+	void *filter_data;
+	const char *chan_name;
+	unsigned int fifo_size;
+	unsigned int flags;
+	void *peripheral_config;
+	size_t peripheral_size;
+};
+
+void snd_dmaengine_pcm_set_config_from_dai_data(
+	const struct snd_pcm_substream *substream,
+	const struct snd_dmaengine_dai_dma_data *dma_data,
+	struct dma_slave_config *config);
+
+int snd_dmaengine_pcm_refine_runtime_hwparams(
+	struct snd_pcm_substream *substream,
+	struct snd_dmaengine_dai_dma_data *dma_data,
+	struct snd_pcm_hardware *hw,
+	struct dma_chan *chan);
+
+/*
+ * Try to request the DMA channel using compat_request_channel or
+ * compat_filter_fn if it couldn't be requested through devicetree.
+ */
+#define SND_DMAENGINE_PCM_FLAG_COMPAT BIT(0)
+/*
+ * Don't try to request the DMA channels through devicetree. This flag only
+ * makes sense if SND_DMAENGINE_PCM_FLAG_COMPAT is set as well.
+ */
+#define SND_DMAENGINE_PCM_FLAG_NO_DT BIT(1)
+/*
+ * The PCM is half duplex and the DMA channel is shared between capture and
+ * playback.
+ */
+#define SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX BIT(3)
+
+/**
+ * struct snd_dmaengine_pcm_config - Configuration data for dmaengine based PCM
+ * @prepare_slave_config: Callback used to fill in the DMA slave_config for a
+ *   PCM substream. Will be called from the PCM drivers hwparams callback.
+ * @compat_request_channel: Callback to request a DMA channel for platforms
+ *   which do not use devicetree.
+ * @process: Callback used to apply processing on samples transferred from/to
+ *   user space.
+ * @compat_filter_fn: Will be used as the filter function when requesting a
+ *  channel for platforms which do not use devicetree. The filter parameter
+ *  will be the DAI's DMA data.
+ * @dma_dev: If set, request DMA channel on this device rather than the DAI
+ *  device.
+ * @chan_names: If set, these custom DMA channel names will be requested at
+ *  registration time.
+ * @pcm_hardware: snd_pcm_hardware struct to be used for the PCM.
+ * @prealloc_buffer_size: Size of the preallocated audio buffer.
+ *
+ * Note: If both compat_request_channel and compat_filter_fn are set
+ * compat_request_channel will be used to request the channel and
+ * compat_filter_fn will be ignored. Otherwise the channel will be requested
+ * using dma_request_channel with compat_filter_fn as the filter function.
+ */
+struct snd_dmaengine_pcm_config {
+	int (*prepare_slave_config)(struct snd_pcm_substream *substream,
+			struct snd_pcm_hw_params *params,
+			struct dma_slave_config *slave_config);
+	struct dma_chan *(*compat_request_channel)(
+			struct snd_soc_pcm_runtime *rtd,
+			struct snd_pcm_substream *substream);
+	int (*process)(struct snd_pcm_substream *substream,
+		       int channel, unsigned long hwoff,
+		       void *buf, unsigned long bytes);
+	dma_filter_fn compat_filter_fn;
+	struct device *dma_dev;
+	const char *chan_names[SNDRV_PCM_STREAM_LAST + 1];
+
+	const struct snd_pcm_hardware *pcm_hardware;
+	unsigned int prealloc_buffer_size;
+};
+
+int snd_dmaengine_pcm_register(struct device *dev,
+	const struct snd_dmaengine_pcm_config *config,
+	unsigned int flags);
+void snd_dmaengine_pcm_unregister(struct device *dev);
+
+int devm_snd_dmaengine_pcm_register(struct device *dev,
+	const struct snd_dmaengine_pcm_config *config,
+	unsigned int flags);
+
+int snd_dmaengine_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params,
+	struct dma_slave_config *slave_config);
+
+#define SND_DMAENGINE_PCM_DRV_NAME "snd_dmaengine_pcm"
+
+struct dmaengine_pcm {
+	struct dma_chan *chan[SNDRV_PCM_STREAM_LAST + 1];
+	const struct snd_dmaengine_pcm_config *config;
+	struct snd_soc_component component;
+	unsigned int flags;
+};
+
+static inline struct dmaengine_pcm *soc_component_to_pcm(struct snd_soc_component *p)
+{
+	return container_of(p, struct dmaengine_pcm, component);
+}
+#endif