Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 132 insertions, 0 deletions

diff --git a/include/sound/emux_legacy.h b/include/sound/emux_legacy.h
new file mode 100644
index 000000000..1127e30d3
--- /dev/null
+++ b/include/sound/emux_legacy.h
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __SOUND_EMUX_LEGACY_H
+#define __SOUND_EMUX_LEGACY_H
+
+/*
+ *  Copyright (c) 1999-2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *  Definitions of OSS compatible headers for Emu8000 device informations
+ */
+
+#include <sound/seq_oss_legacy.h>
+
+/*
+ * awe hardware controls
+ */
+
+#define _EMUX_OSS_DEBUG_MODE		0x00
+#define _EMUX_OSS_REVERB_MODE		0x01
+#define _EMUX_OSS_CHORUS_MODE		0x02
+#define _EMUX_OSS_REMOVE_LAST_SAMPLES	0x03
+#define _EMUX_OSS_INITIALIZE_CHIP	0x04
+#define _EMUX_OSS_SEND_EFFECT		0x05
+#define _EMUX_OSS_TERMINATE_CHANNEL	0x06
+#define _EMUX_OSS_TERMINATE_ALL		0x07
+#define _EMUX_OSS_INITIAL_VOLUME	0x08
+#define _EMUX_OSS_INITIAL_ATTEN	_EMUX_OSS_INITIAL_VOLUME
+#define _EMUX_OSS_RESET_CHANNEL		0x09
+#define _EMUX_OSS_CHANNEL_MODE		0x0a
+#define _EMUX_OSS_DRUM_CHANNELS		0x0b
+#define _EMUX_OSS_MISC_MODE		0x0c
+#define _EMUX_OSS_RELEASE_ALL		0x0d
+#define _EMUX_OSS_NOTEOFF_ALL		0x0e
+#define _EMUX_OSS_CHN_PRESSURE		0x0f
+#define _EMUX_OSS_EQUALIZER		0x11
+
+#define _EMUX_OSS_MODE_FLAG		0x80
+#define _EMUX_OSS_COOKED_FLAG		0x40	/* not supported */
+#define _EMUX_OSS_MODE_VALUE_MASK	0x3F
+
+
+/*
+ * mode type definitions
+ */
+enum {
+/* 0*/	EMUX_MD_EXCLUSIVE_OFF,	/* obsolete */
+/* 1*/	EMUX_MD_EXCLUSIVE_ON,	/* obsolete */
+/* 2*/	EMUX_MD_VERSION,		/* read only */
+/* 3*/	EMUX_MD_EXCLUSIVE_SOUND,	/* 0/1: exclusive note on (default=1) */
+/* 4*/	EMUX_MD_REALTIME_PAN,	/* 0/1: do realtime pan change (default=1) */
+/* 5*/	EMUX_MD_GUS_BANK,	/* bank number for GUS patches (default=0) */
+/* 6*/	EMUX_MD_KEEP_EFFECT,	/* 0/1: keep effect values, (default=0) */
+/* 7*/	EMUX_MD_ZERO_ATTEN,	/* attenuation of max volume (default=32) */
+/* 8*/	EMUX_MD_CHN_PRIOR,	/* 0/1: set MIDI channel priority mode (default=1) */
+/* 9*/	EMUX_MD_MOD_SENSE,	/* integer: modwheel sensitivity (def=18) */
+/*10*/	EMUX_MD_DEF_PRESET,	/* integer: default preset number (def=0) */
+/*11*/	EMUX_MD_DEF_BANK,	/* integer: default bank number (def=0) */
+/*12*/	EMUX_MD_DEF_DRUM,	/* integer: default drumset number (def=0) */
+/*13*/	EMUX_MD_TOGGLE_DRUM_BANK, /* 0/1: toggle drum flag with bank# (def=0) */
+/*14*/	EMUX_MD_NEW_VOLUME_CALC,	/* 0/1: volume calculation mode (def=1) */
+/*15*/	EMUX_MD_CHORUS_MODE,	/* integer: chorus mode (def=2) */
+/*16*/	EMUX_MD_REVERB_MODE,	/* integer: chorus mode (def=4) */
+/*17*/	EMUX_MD_BASS_LEVEL,	/* integer: bass level (def=5) */
+/*18*/	EMUX_MD_TREBLE_LEVEL,	/* integer: treble level (def=9) */
+/*19*/	EMUX_MD_DEBUG_MODE,	/* integer: debug level (def=0) */
+/*20*/	EMUX_MD_PAN_EXCHANGE,	/* 0/1: exchange panning direction (def=0) */
+	EMUX_MD_END,
+};
+
+
+/*
+ * effect parameters
+ */
+enum {
+
+/* modulation envelope parameters */
+/* 0*/	EMUX_FX_ENV1_DELAY,	/* WORD: ENVVAL */
+/* 1*/	EMUX_FX_ENV1_ATTACK,	/* BYTE: up ATKHLD */
+/* 2*/	EMUX_FX_ENV1_HOLD,	/* BYTE: lw ATKHLD */
+/* 3*/	EMUX_FX_ENV1_DECAY,	/* BYTE: lw DCYSUS */
+/* 4*/	EMUX_FX_ENV1_RELEASE,	/* BYTE: lw DCYSUS */
+/* 5*/	EMUX_FX_ENV1_SUSTAIN,	/* BYTE: up DCYSUS */
+/* 6*/	EMUX_FX_ENV1_PITCH,	/* BYTE: up PEFE */
+/* 7*/	EMUX_FX_ENV1_CUTOFF,	/* BYTE: lw PEFE */
+
+/* volume envelope parameters */
+/* 8*/	EMUX_FX_ENV2_DELAY,	/* WORD: ENVVOL */
+/* 9*/	EMUX_FX_ENV2_ATTACK,	/* BYTE: up ATKHLDV */
+/*10*/	EMUX_FX_ENV2_HOLD,	/* BYTE: lw ATKHLDV */
+/*11*/	EMUX_FX_ENV2_DECAY,	/* BYTE: lw DCYSUSV */
+/*12*/	EMUX_FX_ENV2_RELEASE,	/* BYTE: lw DCYSUSV */
+/*13*/	EMUX_FX_ENV2_SUSTAIN,	/* BYTE: up DCYSUSV */
+	
+/* LFO1 (tremolo & vibrato) parameters */
+/*14*/	EMUX_FX_LFO1_DELAY,	/* WORD: LFO1VAL */
+/*15*/	EMUX_FX_LFO1_FREQ,	/* BYTE: lo TREMFRQ */
+/*16*/	EMUX_FX_LFO1_VOLUME,	/* BYTE: up TREMFRQ */
+/*17*/	EMUX_FX_LFO1_PITCH,	/* BYTE: up FMMOD */
+/*18*/	EMUX_FX_LFO1_CUTOFF,	/* BYTE: lo FMMOD */
+
+/* LFO2 (vibrato) parameters */
+/*19*/	EMUX_FX_LFO2_DELAY,	/* WORD: LFO2VAL */
+/*20*/	EMUX_FX_LFO2_FREQ,	/* BYTE: lo FM2FRQ2 */
+/*21*/	EMUX_FX_LFO2_PITCH,	/* BYTE: up FM2FRQ2 */
+
+/* Other overall effect parameters */
+/*22*/	EMUX_FX_INIT_PITCH,	/* SHORT: pitch offset */
+/*23*/	EMUX_FX_CHORUS,		/* BYTE: chorus effects send (0-255) */
+/*24*/	EMUX_FX_REVERB,		/* BYTE: reverb effects send (0-255) */
+/*25*/	EMUX_FX_CUTOFF,		/* BYTE: up IFATN */
+/*26*/	EMUX_FX_FILTERQ,		/* BYTE: up CCCA */
+
+/* Sample / loop offset changes */
+/*27*/	EMUX_FX_SAMPLE_START,	/* SHORT: offset */
+/*28*/	EMUX_FX_LOOP_START,	/* SHORT: offset */
+/*29*/	EMUX_FX_LOOP_END,	/* SHORT: offset */
+/*30*/	EMUX_FX_COARSE_SAMPLE_START,	/* SHORT: upper word offset */
+/*31*/	EMUX_FX_COARSE_LOOP_START,	/* SHORT: upper word offset */
+/*32*/	EMUX_FX_COARSE_LOOP_END,		/* SHORT: upper word offset */
+/*33*/	EMUX_FX_ATTEN,		/* BYTE: lo IFATN */
+
+	EMUX_FX_END,
+};
+/* number of effects */
+#define EMUX_NUM_EFFECTS  EMUX_FX_END
+
+/* effect flag values */
+#define EMUX_FX_FLAG_OFF	0
+#define EMUX_FX_FLAG_SET	1
+#define EMUX_FX_FLAG_ADD	2
+
+
+#endif /* __SOUND_EMUX_LEGACY_H */