Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 558 insertions, 0 deletions

diff --git a/include/sound/hda_verbs.h b/include/sound/hda_verbs.h
new file mode 100644
index 000000000..006d358ac
--- /dev/null
+++ b/include/sound/hda_verbs.h
@@ -0,0 +1,558 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * HD-audio codec verbs
+ */
+
+#ifndef __SOUND_HDA_VERBS_H
+#define __SOUND_HDA_VERBS_H
+
+/*
+ * nodes
+ */
+#define	AC_NODE_ROOT		0x00
+
+/*
+ * function group types
+ */
+enum {
+	AC_GRP_AUDIO_FUNCTION = 0x01,
+	AC_GRP_MODEM_FUNCTION = 0x02,
+};
+
+/*
+ * widget types
+ */
+enum {
+	AC_WID_AUD_OUT,		/* Audio Out */
+	AC_WID_AUD_IN,		/* Audio In */
+	AC_WID_AUD_MIX,		/* Audio Mixer */
+	AC_WID_AUD_SEL,		/* Audio Selector */
+	AC_WID_PIN,		/* Pin Complex */
+	AC_WID_POWER,		/* Power */
+	AC_WID_VOL_KNB,		/* Volume Knob */
+	AC_WID_BEEP,		/* Beep Generator */
+	AC_WID_VENDOR = 0x0f	/* Vendor specific */
+};
+
+/*
+ * GET verbs
+ */
+#define AC_VERB_GET_STREAM_FORMAT		0x0a00
+#define AC_VERB_GET_AMP_GAIN_MUTE		0x0b00
+#define AC_VERB_GET_PROC_COEF			0x0c00
+#define AC_VERB_GET_COEF_INDEX			0x0d00
+#define AC_VERB_PARAMETERS			0x0f00
+#define AC_VERB_GET_CONNECT_SEL			0x0f01
+#define AC_VERB_GET_CONNECT_LIST		0x0f02
+#define AC_VERB_GET_PROC_STATE			0x0f03
+#define AC_VERB_GET_SDI_SELECT			0x0f04
+#define AC_VERB_GET_POWER_STATE			0x0f05
+#define AC_VERB_GET_CONV			0x0f06
+#define AC_VERB_GET_PIN_WIDGET_CONTROL		0x0f07
+#define AC_VERB_GET_UNSOLICITED_RESPONSE	0x0f08
+#define AC_VERB_GET_PIN_SENSE			0x0f09
+#define AC_VERB_GET_BEEP_CONTROL		0x0f0a
+#define AC_VERB_GET_EAPD_BTLENABLE		0x0f0c
+#define AC_VERB_GET_DIGI_CONVERT_1		0x0f0d
+#define AC_VERB_GET_DIGI_CONVERT_2		0x0f0e /* unused */
+#define AC_VERB_GET_VOLUME_KNOB_CONTROL		0x0f0f
+/* f10-f1a: GPIO */
+#define AC_VERB_GET_GPIO_DATA			0x0f15
+#define AC_VERB_GET_GPIO_MASK			0x0f16
+#define AC_VERB_GET_GPIO_DIRECTION		0x0f17
+#define AC_VERB_GET_GPIO_WAKE_MASK		0x0f18
+#define AC_VERB_GET_GPIO_UNSOLICITED_RSP_MASK	0x0f19
+#define AC_VERB_GET_GPIO_STICKY_MASK		0x0f1a
+#define AC_VERB_GET_CONFIG_DEFAULT		0x0f1c
+/* f20: AFG/MFG */
+#define AC_VERB_GET_SUBSYSTEM_ID		0x0f20
+#define AC_VERB_GET_STRIPE_CONTROL		0x0f24
+#define AC_VERB_GET_CVT_CHAN_COUNT		0x0f2d
+#define AC_VERB_GET_HDMI_DIP_SIZE		0x0f2e
+#define AC_VERB_GET_HDMI_ELDD			0x0f2f
+#define AC_VERB_GET_HDMI_DIP_INDEX		0x0f30
+#define AC_VERB_GET_HDMI_DIP_DATA		0x0f31
+#define AC_VERB_GET_HDMI_DIP_XMIT		0x0f32
+#define AC_VERB_GET_HDMI_CP_CTRL		0x0f33
+#define AC_VERB_GET_HDMI_CHAN_SLOT		0x0f34
+#define AC_VERB_GET_DEVICE_SEL			0xf35
+#define AC_VERB_GET_DEVICE_LIST			0xf36
+
+/*
+ * SET verbs
+ */
+#define AC_VERB_SET_STREAM_FORMAT		0x200
+#define AC_VERB_SET_AMP_GAIN_MUTE		0x300
+#define AC_VERB_SET_PROC_COEF			0x400
+#define AC_VERB_SET_COEF_INDEX			0x500
+#define AC_VERB_SET_CONNECT_SEL			0x701
+#define AC_VERB_SET_PROC_STATE			0x703
+#define AC_VERB_SET_SDI_SELECT			0x704
+#define AC_VERB_SET_POWER_STATE			0x705
+#define AC_VERB_SET_CHANNEL_STREAMID		0x706
+#define AC_VERB_SET_PIN_WIDGET_CONTROL		0x707
+#define AC_VERB_SET_UNSOLICITED_ENABLE		0x708
+#define AC_VERB_SET_PIN_SENSE			0x709
+#define AC_VERB_SET_BEEP_CONTROL		0x70a
+#define AC_VERB_SET_EAPD_BTLENABLE		0x70c
+#define AC_VERB_SET_DIGI_CONVERT_1		0x70d
+#define AC_VERB_SET_DIGI_CONVERT_2		0x70e
+#define AC_VERB_SET_DIGI_CONVERT_3		0x73e
+#define AC_VERB_SET_VOLUME_KNOB_CONTROL		0x70f
+#define AC_VERB_SET_GPIO_DATA			0x715
+#define AC_VERB_SET_GPIO_MASK			0x716
+#define AC_VERB_SET_GPIO_DIRECTION		0x717
+#define AC_VERB_SET_GPIO_WAKE_MASK		0x718
+#define AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK	0x719
+#define AC_VERB_SET_GPIO_STICKY_MASK		0x71a
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_0	0x71c
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_1	0x71d
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_2	0x71e
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_3	0x71f
+#define AC_VERB_SET_EAPD				0x788
+#define AC_VERB_SET_CODEC_RESET			0x7ff
+#define AC_VERB_SET_STRIPE_CONTROL		0x724
+#define AC_VERB_SET_CVT_CHAN_COUNT		0x72d
+#define AC_VERB_SET_HDMI_DIP_INDEX		0x730
+#define AC_VERB_SET_HDMI_DIP_DATA		0x731
+#define AC_VERB_SET_HDMI_DIP_XMIT		0x732
+#define AC_VERB_SET_HDMI_CP_CTRL		0x733
+#define AC_VERB_SET_HDMI_CHAN_SLOT		0x734
+#define AC_VERB_SET_DEVICE_SEL			0x735
+
+/*
+ * Parameter IDs
+ */
+#define AC_PAR_VENDOR_ID		0x00
+#define AC_PAR_SUBSYSTEM_ID		0x01
+#define AC_PAR_REV_ID			0x02
+#define AC_PAR_NODE_COUNT		0x04
+#define AC_PAR_FUNCTION_TYPE		0x05
+#define AC_PAR_AUDIO_FG_CAP		0x08
+#define AC_PAR_AUDIO_WIDGET_CAP		0x09
+#define AC_PAR_PCM			0x0a
+#define AC_PAR_STREAM			0x0b
+#define AC_PAR_PIN_CAP			0x0c
+#define AC_PAR_AMP_IN_CAP		0x0d
+#define AC_PAR_CONNLIST_LEN		0x0e
+#define AC_PAR_POWER_STATE		0x0f
+#define AC_PAR_PROC_CAP			0x10
+#define AC_PAR_GPIO_CAP			0x11
+#define AC_PAR_AMP_OUT_CAP		0x12
+#define AC_PAR_VOL_KNB_CAP		0x13
+#define AC_PAR_DEVLIST_LEN		0x15
+#define AC_PAR_HDMI_LPCM_CAP		0x20
+
+/*
+ * AC_VERB_PARAMETERS results (32bit)
+ */
+
+/* Function Group Type */
+#define AC_FGT_TYPE			(0xff<<0)
+#define AC_FGT_TYPE_SHIFT		0
+#define AC_FGT_UNSOL_CAP		(1<<8)
+
+/* Audio Function Group Capabilities */
+#define AC_AFG_OUT_DELAY		(0xf<<0)
+#define AC_AFG_IN_DELAY			(0xf<<8)
+#define AC_AFG_BEEP_GEN			(1<<16)
+
+/* Audio Widget Capabilities */
+#define AC_WCAP_STEREO			(1<<0)	/* stereo I/O */
+#define AC_WCAP_IN_AMP			(1<<1)	/* AMP-in present */
+#define AC_WCAP_OUT_AMP			(1<<2)	/* AMP-out present */
+#define AC_WCAP_AMP_OVRD		(1<<3)	/* AMP-parameter override */
+#define AC_WCAP_FORMAT_OVRD		(1<<4)	/* format override */
+#define AC_WCAP_STRIPE			(1<<5)	/* stripe */
+#define AC_WCAP_PROC_WID		(1<<6)	/* Proc Widget */
+#define AC_WCAP_UNSOL_CAP		(1<<7)	/* Unsol capable */
+#define AC_WCAP_CONN_LIST		(1<<8)	/* connection list */
+#define AC_WCAP_DIGITAL			(1<<9)	/* digital I/O */
+#define AC_WCAP_POWER			(1<<10)	/* power control */
+#define AC_WCAP_LR_SWAP			(1<<11)	/* L/R swap */
+#define AC_WCAP_CP_CAPS			(1<<12) /* content protection */
+#define AC_WCAP_CHAN_CNT_EXT		(7<<13)	/* channel count ext */
+#define AC_WCAP_DELAY			(0xf<<16)
+#define AC_WCAP_DELAY_SHIFT		16
+#define AC_WCAP_TYPE			(0xf<<20)
+#define AC_WCAP_TYPE_SHIFT		20
+
+/* supported PCM rates and bits */
+#define AC_SUPPCM_RATES			(0xfff << 0)
+#define AC_SUPPCM_BITS_8		(1<<16)
+#define AC_SUPPCM_BITS_16		(1<<17)
+#define AC_SUPPCM_BITS_20		(1<<18)
+#define AC_SUPPCM_BITS_24		(1<<19)
+#define AC_SUPPCM_BITS_32		(1<<20)
+
+/* supported PCM stream format */
+#define AC_SUPFMT_PCM			(1<<0)
+#define AC_SUPFMT_FLOAT32		(1<<1)
+#define AC_SUPFMT_AC3			(1<<2)
+
+/* GP I/O count */
+#define AC_GPIO_IO_COUNT		(0xff<<0)
+#define AC_GPIO_O_COUNT			(0xff<<8)
+#define AC_GPIO_O_COUNT_SHIFT		8
+#define AC_GPIO_I_COUNT			(0xff<<16)
+#define AC_GPIO_I_COUNT_SHIFT		16
+#define AC_GPIO_UNSOLICITED		(1<<30)
+#define AC_GPIO_WAKE			(1<<31)
+
+/* Converter stream, channel */
+#define AC_CONV_CHANNEL			(0xf<<0)
+#define AC_CONV_STREAM			(0xf<<4)
+#define AC_CONV_STREAM_SHIFT		4
+
+/* Input converter SDI select */
+#define AC_SDI_SELECT			(0xf<<0)
+
+/* stream format id */
+#define AC_FMT_CHAN_SHIFT		0
+#define AC_FMT_CHAN_MASK		(0x0f << 0)
+#define AC_FMT_BITS_SHIFT		4
+#define AC_FMT_BITS_MASK		(7 << 4)
+#define AC_FMT_BITS_8			(0 << 4)
+#define AC_FMT_BITS_16			(1 << 4)
+#define AC_FMT_BITS_20			(2 << 4)
+#define AC_FMT_BITS_24			(3 << 4)
+#define AC_FMT_BITS_32			(4 << 4)
+#define AC_FMT_DIV_SHIFT		8
+#define AC_FMT_DIV_MASK			(7 << 8)
+#define AC_FMT_MULT_SHIFT		11
+#define AC_FMT_MULT_MASK		(7 << 11)
+#define AC_FMT_BASE_SHIFT		14
+#define AC_FMT_BASE_48K			(0 << 14)
+#define AC_FMT_BASE_44K			(1 << 14)
+#define AC_FMT_TYPE_SHIFT		15
+#define AC_FMT_TYPE_PCM			(0 << 15)
+#define AC_FMT_TYPE_NON_PCM		(1 << 15)
+
+/* Unsolicited response control */
+#define AC_UNSOL_TAG			(0x3f<<0)
+#define AC_UNSOL_ENABLED		(1<<7)
+#define AC_USRSP_EN			AC_UNSOL_ENABLED
+
+/* Unsolicited responses */
+#define AC_UNSOL_RES_TAG		(0x3f<<26)
+#define AC_UNSOL_RES_TAG_SHIFT		26
+#define AC_UNSOL_RES_SUBTAG		(0x1f<<21)
+#define AC_UNSOL_RES_SUBTAG_SHIFT	21
+#define AC_UNSOL_RES_DE			(0x3f<<15)  /* Device Entry
+						     * (for DP1.2 MST)
+						     */
+#define AC_UNSOL_RES_DE_SHIFT		15
+#define AC_UNSOL_RES_IA			(1<<2)	/* Inactive (for DP1.2 MST) */
+#define AC_UNSOL_RES_ELDV		(1<<1)	/* ELD Data valid (for HDMI) */
+#define AC_UNSOL_RES_PD			(1<<0)	/* pinsense detect */
+#define AC_UNSOL_RES_CP_STATE		(1<<1)	/* content protection */
+#define AC_UNSOL_RES_CP_READY		(1<<0)	/* content protection */
+
+/* Pin widget capabilies */
+#define AC_PINCAP_IMP_SENSE		(1<<0)	/* impedance sense capable */
+#define AC_PINCAP_TRIG_REQ		(1<<1)	/* trigger required */
+#define AC_PINCAP_PRES_DETECT		(1<<2)	/* presence detect capable */
+#define AC_PINCAP_HP_DRV		(1<<3)	/* headphone drive capable */
+#define AC_PINCAP_OUT			(1<<4)	/* output capable */
+#define AC_PINCAP_IN			(1<<5)	/* input capable */
+#define AC_PINCAP_BALANCE		(1<<6)	/* balanced I/O capable */
+/* Note: This LR_SWAP pincap is defined in the Realtek ALC883 specification,
+ *       but is marked reserved in the Intel HDA specification.
+ */
+#define AC_PINCAP_LR_SWAP		(1<<7)	/* L/R swap */
+/* Note: The same bit as LR_SWAP is newly defined as HDMI capability
+ *       in HD-audio specification
+ */
+#define AC_PINCAP_HDMI			(1<<7)	/* HDMI pin */
+#define AC_PINCAP_DP			(1<<24)	/* DisplayPort pin, can
+						 * coexist with AC_PINCAP_HDMI
+						 */
+#define AC_PINCAP_VREF			(0x37<<8)
+#define AC_PINCAP_VREF_SHIFT		8
+#define AC_PINCAP_EAPD			(1<<16)	/* EAPD capable */
+#define AC_PINCAP_HBR			(1<<27)	/* High Bit Rate */
+/* Vref status (used in pin cap) */
+#define AC_PINCAP_VREF_HIZ		(1<<0)	/* Hi-Z */
+#define AC_PINCAP_VREF_50		(1<<1)	/* 50% */
+#define AC_PINCAP_VREF_GRD		(1<<2)	/* ground */
+#define AC_PINCAP_VREF_80		(1<<4)	/* 80% */
+#define AC_PINCAP_VREF_100		(1<<5)	/* 100% */
+
+/* Amplifier capabilities */
+#define AC_AMPCAP_OFFSET		(0x7f<<0)  /* 0dB offset */
+#define AC_AMPCAP_OFFSET_SHIFT		0
+#define AC_AMPCAP_NUM_STEPS		(0x7f<<8)  /* number of steps */
+#define AC_AMPCAP_NUM_STEPS_SHIFT	8
+#define AC_AMPCAP_STEP_SIZE		(0x7f<<16) /* step size 0-32dB
+						    * in 0.25dB
+						    */
+#define AC_AMPCAP_STEP_SIZE_SHIFT	16
+#define AC_AMPCAP_MUTE			(1<<31)    /* mute capable */
+#define AC_AMPCAP_MUTE_SHIFT		31
+
+/* driver-specific amp-caps: using bits 24-30 */
+#define AC_AMPCAP_MIN_MUTE		(1 << 30) /* min-volume = mute */
+
+/* Connection list */
+#define AC_CLIST_LENGTH			(0x7f<<0)
+#define AC_CLIST_LONG			(1<<7)
+
+/* Supported power status */
+#define AC_PWRST_D0SUP			(1<<0)
+#define AC_PWRST_D1SUP			(1<<1)
+#define AC_PWRST_D2SUP			(1<<2)
+#define AC_PWRST_D3SUP			(1<<3)
+#define AC_PWRST_D3COLDSUP		(1<<4)
+#define AC_PWRST_S3D3COLDSUP		(1<<29)
+#define AC_PWRST_CLKSTOP		(1<<30)
+#define AC_PWRST_EPSS			(1U<<31)
+
+/* Power state values */
+#define AC_PWRST_SETTING		(0xf<<0)
+#define AC_PWRST_ACTUAL			(0xf<<4)
+#define AC_PWRST_ACTUAL_SHIFT		4
+#define AC_PWRST_D0			0x00
+#define AC_PWRST_D1			0x01
+#define AC_PWRST_D2			0x02
+#define AC_PWRST_D3			0x03
+#define AC_PWRST_ERROR                  (1<<8)
+#define AC_PWRST_CLK_STOP_OK            (1<<9)
+#define AC_PWRST_SETTING_RESET          (1<<10)
+
+/* Processing capabilies */
+#define AC_PCAP_BENIGN			(1<<0)
+#define AC_PCAP_NUM_COEF		(0xff<<8)
+#define AC_PCAP_NUM_COEF_SHIFT		8
+
+/* Volume knobs capabilities */
+#define AC_KNBCAP_NUM_STEPS		(0x7f<<0)
+#define AC_KNBCAP_DELTA			(1<<7)
+
+/* HDMI LPCM capabilities */
+#define AC_LPCMCAP_48K_CP_CHNS		(0x0f<<0) /* max channels w/ CP-on */
+#define AC_LPCMCAP_48K_NO_CHNS		(0x0f<<4) /* max channels w/o CP-on */
+#define AC_LPCMCAP_48K_20BIT		(1<<8)	/* 20b bitrate supported */
+#define AC_LPCMCAP_48K_24BIT		(1<<9)	/* 24b bitrate supported */
+#define AC_LPCMCAP_96K_CP_CHNS		(0x0f<<10) /* max channels w/ CP-on */
+#define AC_LPCMCAP_96K_NO_CHNS		(0x0f<<14) /* max channels w/o CP-on */
+#define AC_LPCMCAP_96K_20BIT		(1<<18)	/* 20b bitrate supported */
+#define AC_LPCMCAP_96K_24BIT		(1<<19)	/* 24b bitrate supported */
+#define AC_LPCMCAP_192K_CP_CHNS		(0x0f<<20) /* max channels w/ CP-on */
+#define AC_LPCMCAP_192K_NO_CHNS		(0x0f<<24) /* max channels w/o CP-on */
+#define AC_LPCMCAP_192K_20BIT		(1<<28)	/* 20b bitrate supported */
+#define AC_LPCMCAP_192K_24BIT		(1<<29)	/* 24b bitrate supported */
+#define AC_LPCMCAP_44K			(1<<30)	/* 44.1kHz support */
+#define AC_LPCMCAP_44K_MS		(1<<31)	/* 44.1kHz-multiplies support */
+
+/* Display pin's device list length */
+#define AC_DEV_LIST_LEN_MASK		0x3f
+#define AC_MAX_DEV_LIST_LEN		64
+
+/*
+ * Control Parameters
+ */
+
+/* Amp gain/mute */
+#define AC_AMP_MUTE			(1<<7)
+#define AC_AMP_GAIN			(0x7f)
+#define AC_AMP_GET_INDEX		(0xf<<0)
+
+#define AC_AMP_GET_LEFT			(1<<13)
+#define AC_AMP_GET_RIGHT		(0<<13)
+#define AC_AMP_GET_OUTPUT		(1<<15)
+#define AC_AMP_GET_INPUT		(0<<15)
+
+#define AC_AMP_SET_INDEX		(0xf<<8)
+#define AC_AMP_SET_INDEX_SHIFT		8
+#define AC_AMP_SET_RIGHT		(1<<12)
+#define AC_AMP_SET_LEFT			(1<<13)
+#define AC_AMP_SET_INPUT		(1<<14)
+#define AC_AMP_SET_OUTPUT		(1<<15)
+
+/* DIGITAL1 bits */
+#define AC_DIG1_ENABLE			(1<<0)
+#define AC_DIG1_V			(1<<1)
+#define AC_DIG1_VCFG			(1<<2)
+#define AC_DIG1_EMPHASIS		(1<<3)
+#define AC_DIG1_COPYRIGHT		(1<<4)
+#define AC_DIG1_NONAUDIO		(1<<5)
+#define AC_DIG1_PROFESSIONAL		(1<<6)
+#define AC_DIG1_LEVEL			(1<<7)
+
+/* DIGITAL2 bits */
+#define AC_DIG2_CC			(0x7f<<0)
+
+/* DIGITAL3 bits */
+#define AC_DIG3_ICT			(0xf<<0)
+#define AC_DIG3_KAE			(1<<7)
+
+/* Pin widget control - 8bit */
+#define AC_PINCTL_EPT			(0x3<<0)
+#define AC_PINCTL_EPT_NATIVE		0
+#define AC_PINCTL_EPT_HBR		3
+#define AC_PINCTL_VREFEN		(0x7<<0)
+#define AC_PINCTL_VREF_HIZ		0	/* Hi-Z */
+#define AC_PINCTL_VREF_50		1	/* 50% */
+#define AC_PINCTL_VREF_GRD		2	/* ground */
+#define AC_PINCTL_VREF_80		4	/* 80% */
+#define AC_PINCTL_VREF_100		5	/* 100% */
+#define AC_PINCTL_IN_EN			(1<<5)
+#define AC_PINCTL_OUT_EN		(1<<6)
+#define AC_PINCTL_HP_EN			(1<<7)
+
+/* Pin sense - 32bit */
+#define AC_PINSENSE_IMPEDANCE_MASK	(0x7fffffff)
+#define AC_PINSENSE_PRESENCE		(1<<31)
+#define AC_PINSENSE_ELDV		(1<<30)	/* ELD valid (HDMI) */
+
+/* EAPD/BTL enable - 32bit */
+#define AC_EAPDBTL_BALANCED		(1<<0)
+#define AC_EAPDBTL_EAPD			(1<<1)
+#define AC_EAPDBTL_LR_SWAP		(1<<2)
+
+/* HDMI ELD data */
+#define AC_ELDD_ELD_VALID		(1<<31)
+#define AC_ELDD_ELD_DATA		0xff
+
+/* HDMI DIP size */
+#define AC_DIPSIZE_ELD_BUF		(1<<3) /* ELD buf size of packet size */
+#define AC_DIPSIZE_PACK_IDX		(0x07<<0) /* packet index */
+
+/* HDMI DIP index */
+#define AC_DIPIDX_PACK_IDX		(0x07<<5) /* packet idnex */
+#define AC_DIPIDX_BYTE_IDX		(0x1f<<0) /* byte index */
+
+/* HDMI DIP xmit (transmit) control */
+#define AC_DIPXMIT_MASK			(0x3<<6)
+#define AC_DIPXMIT_DISABLE		(0x0<<6) /* disable xmit */
+#define AC_DIPXMIT_ONCE			(0x2<<6) /* xmit once then disable */
+#define AC_DIPXMIT_BEST			(0x3<<6) /* best effort */
+
+/* HDMI content protection (CP) control */
+#define AC_CPCTRL_CES			(1<<9) /* current encryption state */
+#define AC_CPCTRL_READY			(1<<8) /* ready bit */
+#define AC_CPCTRL_SUBTAG		(0x1f<<3) /* subtag for unsol-resp */
+#define AC_CPCTRL_STATE			(3<<0) /* current CP request state */
+
+/* Converter channel <-> HDMI slot mapping */
+#define AC_CVTMAP_HDMI_SLOT		(0xf<<0) /* HDMI slot number */
+#define AC_CVTMAP_CHAN			(0xf<<4) /* converter channel number */
+
+/* configuration default - 32bit */
+#define AC_DEFCFG_SEQUENCE		(0xf<<0)
+#define AC_DEFCFG_DEF_ASSOC		(0xf<<4)
+#define AC_DEFCFG_ASSOC_SHIFT		4
+#define AC_DEFCFG_MISC			(0xf<<8)
+#define AC_DEFCFG_MISC_SHIFT		8
+#define AC_DEFCFG_MISC_NO_PRESENCE	(1<<0)
+#define AC_DEFCFG_COLOR			(0xf<<12)
+#define AC_DEFCFG_COLOR_SHIFT		12
+#define AC_DEFCFG_CONN_TYPE		(0xf<<16)
+#define AC_DEFCFG_CONN_TYPE_SHIFT	16
+#define AC_DEFCFG_DEVICE		(0xf<<20)
+#define AC_DEFCFG_DEVICE_SHIFT		20
+#define AC_DEFCFG_LOCATION		(0x3f<<24)
+#define AC_DEFCFG_LOCATION_SHIFT	24
+#define AC_DEFCFG_PORT_CONN		(0x3<<30)
+#define AC_DEFCFG_PORT_CONN_SHIFT	30
+
+/* Display pin's device list entry */
+#define AC_DE_PD			(1<<0)
+#define AC_DE_ELDV			(1<<1)
+#define AC_DE_IA			(1<<2)
+
+/* device types (0x0-0xf) */
+enum {
+	AC_JACK_LINE_OUT,
+	AC_JACK_SPEAKER,
+	AC_JACK_HP_OUT,
+	AC_JACK_CD,
+	AC_JACK_SPDIF_OUT,
+	AC_JACK_DIG_OTHER_OUT,
+	AC_JACK_MODEM_LINE_SIDE,
+	AC_JACK_MODEM_HAND_SIDE,
+	AC_JACK_LINE_IN,
+	AC_JACK_AUX,
+	AC_JACK_MIC_IN,
+	AC_JACK_TELEPHONY,
+	AC_JACK_SPDIF_IN,
+	AC_JACK_DIG_OTHER_IN,
+	AC_JACK_OTHER = 0xf,
+};
+
+/* jack connection types (0x0-0xf) */
+enum {
+	AC_JACK_CONN_UNKNOWN,
+	AC_JACK_CONN_1_8,
+	AC_JACK_CONN_1_4,
+	AC_JACK_CONN_ATAPI,
+	AC_JACK_CONN_RCA,
+	AC_JACK_CONN_OPTICAL,
+	AC_JACK_CONN_OTHER_DIGITAL,
+	AC_JACK_CONN_OTHER_ANALOG,
+	AC_JACK_CONN_DIN,
+	AC_JACK_CONN_XLR,
+	AC_JACK_CONN_RJ11,
+	AC_JACK_CONN_COMB,
+	AC_JACK_CONN_OTHER = 0xf,
+};
+
+/* jack colors (0x0-0xf) */
+enum {
+	AC_JACK_COLOR_UNKNOWN,
+	AC_JACK_COLOR_BLACK,
+	AC_JACK_COLOR_GREY,
+	AC_JACK_COLOR_BLUE,
+	AC_JACK_COLOR_GREEN,
+	AC_JACK_COLOR_RED,
+	AC_JACK_COLOR_ORANGE,
+	AC_JACK_COLOR_YELLOW,
+	AC_JACK_COLOR_PURPLE,
+	AC_JACK_COLOR_PINK,
+	AC_JACK_COLOR_WHITE = 0xe,
+	AC_JACK_COLOR_OTHER,
+};
+
+/* Jack location (0x0-0x3f) */
+/* common case */
+enum {
+	AC_JACK_LOC_NONE,
+	AC_JACK_LOC_REAR,
+	AC_JACK_LOC_FRONT,
+	AC_JACK_LOC_LEFT,
+	AC_JACK_LOC_RIGHT,
+	AC_JACK_LOC_TOP,
+	AC_JACK_LOC_BOTTOM,
+};
+/* bits 4-5 */
+enum {
+	AC_JACK_LOC_EXTERNAL = 0x00,
+	AC_JACK_LOC_INTERNAL = 0x10,
+	AC_JACK_LOC_SEPARATE = 0x20,
+	AC_JACK_LOC_OTHER    = 0x30,
+};
+enum {
+	/* external on primary chasis */
+	AC_JACK_LOC_REAR_PANEL = 0x07,
+	AC_JACK_LOC_DRIVE_BAY,
+	/* internal */
+	AC_JACK_LOC_RISER = 0x17,
+	AC_JACK_LOC_HDMI,
+	AC_JACK_LOC_ATAPI,
+	/* others */
+	AC_JACK_LOC_MOBILE_IN = 0x37,
+	AC_JACK_LOC_MOBILE_OUT,
+};
+
+/* Port connectivity (0-3) */
+enum {
+	AC_JACK_PORT_COMPLEX,
+	AC_JACK_PORT_NONE,
+	AC_JACK_PORT_FIXED,
+	AC_JACK_PORT_BOTH,
+};
+
+/* max. codec address */
+#define HDA_MAX_CODEC_ADDRESS	0x0f
+
+#endif /* __SOUND_HDA_VERBS_H */