Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 210 insertions, 0 deletions

diff --git a/include/sound/soc-acpi.h b/include/sound/soc-acpi.h
new file mode 100644
index 000000000..b38fd25c5
--- /dev/null
+++ b/include/sound/soc-acpi.h
@@ -0,0 +1,210 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ *
+ * Copyright (C) 2013-15, Intel Corporation. All rights reserved.
+ */
+
+#ifndef __LINUX_SND_SOC_ACPI_H
+#define __LINUX_SND_SOC_ACPI_H
+
+#include <linux/stddef.h>
+#include <linux/acpi.h>
+#include <linux/mod_devicetable.h>
+
+struct snd_soc_acpi_package_context {
+	char *name;           /* package name */
+	int length;           /* number of elements */
+	struct acpi_buffer *format;
+	struct acpi_buffer *state;
+	bool data_valid;
+};
+
+/* codec name is used in DAIs is i2c-<HID>:00 with HID being 8 chars */
+#define SND_ACPI_I2C_ID_LEN (4 + ACPI_ID_LEN + 3 + 1)
+
+#if IS_ENABLED(CONFIG_ACPI)
+/* acpi match */
+struct snd_soc_acpi_mach *
+snd_soc_acpi_find_machine(struct snd_soc_acpi_mach *machines);
+
+bool snd_soc_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
+				    struct snd_soc_acpi_package_context *ctx);
+
+/* check all codecs */
+struct snd_soc_acpi_mach *snd_soc_acpi_codec_list(void *arg);
+
+#else
+/* acpi match */
+static inline struct snd_soc_acpi_mach *
+snd_soc_acpi_find_machine(struct snd_soc_acpi_mach *machines)
+{
+	return NULL;
+}
+
+static inline bool
+snd_soc_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
+				   struct snd_soc_acpi_package_context *ctx)
+{
+	return false;
+}
+
+/* check all codecs */
+static inline struct snd_soc_acpi_mach *snd_soc_acpi_codec_list(void *arg)
+{
+	return NULL;
+}
+#endif
+
+/**
+ * snd_soc_acpi_mach_params: interface for machine driver configuration
+ *
+ * @acpi_ipc_irq_index: used for BYT-CR detection
+ * @platform: string used for HDAudio codec support
+ * @codec_mask: used for HDAudio support
+ * @dmic_num: number of SoC- or chipset-attached PDM digital microphones
+ * @common_hdmi_codec_drv: use commom HDAudio HDMI codec driver
+ * @link_mask: SoundWire links enabled on the board
+ * @links: array of SoundWire link _ADR descriptors, null terminated
+ * @i2s_link_mask: I2S/TDM links enabled on the board
+ * @num_dai_drivers: number of elements in @dai_drivers
+ * @dai_drivers: pointer to dai_drivers, used e.g. in nocodec mode
+ */
+struct snd_soc_acpi_mach_params {
+	u32 acpi_ipc_irq_index;
+	const char *platform;
+	u32 codec_mask;
+	u32 dmic_num;
+	bool common_hdmi_codec_drv;
+	u32 link_mask;
+	const struct snd_soc_acpi_link_adr *links;
+	u32 i2s_link_mask;
+	u32 num_dai_drivers;
+	struct snd_soc_dai_driver *dai_drivers;
+};
+
+/**
+ * snd_soc_acpi_endpoint - endpoint descriptor
+ * @num: endpoint number (mandatory, unique per device)
+ * @aggregated: 0 (independent) or 1 (logically grouped)
+ * @group_position: zero-based order (only when @aggregated is 1)
+ * @group_id: platform-unique group identifier (only when @aggregrated is 1)
+ */
+struct snd_soc_acpi_endpoint {
+	u8 num;
+	u8 aggregated;
+	u8 group_position;
+	u8 group_id;
+};
+
+/**
+ * snd_soc_acpi_adr_device - descriptor for _ADR-enumerated device
+ * @adr: 64 bit ACPI _ADR value
+ * @num_endpoints: number of endpoints for this device
+ * @endpoints: array of endpoints
+ * @name_prefix: string used for codec controls
+ */
+struct snd_soc_acpi_adr_device {
+	const u64 adr;
+	const u8 num_endpoints;
+	const struct snd_soc_acpi_endpoint *endpoints;
+	const char *name_prefix;
+};
+
+/**
+ * snd_soc_acpi_link_adr - ACPI-based list of _ADR enumerated devices
+ * @mask: one bit set indicates the link this list applies to
+ * @num_adr: ARRAY_SIZE of devices
+ * @adr_d: array of devices
+ *
+ * The number of devices per link can be more than 1, e.g. in SoundWire
+ * multi-drop configurations.
+ */
+
+struct snd_soc_acpi_link_adr {
+	const u32 mask;
+	const u32 num_adr;
+	const struct snd_soc_acpi_adr_device *adr_d;
+};
+
+/*
+ * when set the topology uses the -ssp<N> suffix, where N is determined based on
+ * BIOS or DMI information
+ */
+#define SND_SOC_ACPI_TPLG_INTEL_SSP_NUMBER BIT(0)
+
+/*
+ * when more than one SSP is reported in the link mask, use the most significant.
+ * This choice was found to be valid on platforms with ES8336 codecs.
+ */
+#define SND_SOC_ACPI_TPLG_INTEL_SSP_MSB BIT(1)
+
+/*
+ * when set the topology uses the -dmic<N>ch suffix, where N is determined based on
+ * BIOS or DMI information
+ */
+#define SND_SOC_ACPI_TPLG_INTEL_DMIC_NUMBER BIT(2)
+
+/**
+ * snd_soc_acpi_mach: ACPI-based machine descriptor. Most of the fields are
+ * related to the hardware, except for the firmware and topology file names.
+ * A platform supported by legacy and Sound Open Firmware (SOF) would expose
+ * all firmware/topology related fields.
+ *
+ * @id: ACPI ID (usually the codec's) used to find a matching machine driver.
+ * @comp_ids: list of compatible audio codecs using the same machine driver,
+ * firmware and topology
+ * @link_mask: describes required board layout, e.g. for SoundWire.
+ * @links: array of link _ADR descriptors, null terminated.
+ * @drv_name: machine driver name
+ * @fw_filename: firmware file name. Used when SOF is not enabled.
+ * @tplg_filename: topology file name. Used when SOF is not enabled.
+ * @board: board name
+ * @machine_quirk: pointer to quirk, usually based on DMI information when
+ * ACPI ID alone is not sufficient, wrong or misleading
+ * @quirk_data: data used to uniquely identify a machine, usually a list of
+ * audio codecs whose presence if checked with ACPI
+ * @pdata: intended for platform data or machine specific-ops. This structure
+ *  is not constant since this field may be updated at run-time
+ * @sof_tplg_filename: Sound Open Firmware topology file name, if enabled
+ * @tplg_quirk_mask: quirks to select different topology files dynamically
+ */
+/* Descriptor for SST ASoC machine driver */
+struct snd_soc_acpi_mach {
+	u8 id[ACPI_ID_LEN];
+	const struct snd_soc_acpi_codecs *comp_ids;
+	const u32 link_mask;
+	const struct snd_soc_acpi_link_adr *links;
+	const char *drv_name;
+	const char *fw_filename;
+	const char *tplg_filename;
+	const char *board;
+	struct snd_soc_acpi_mach * (*machine_quirk)(void *arg);
+	const void *quirk_data;
+	void *pdata;
+	struct snd_soc_acpi_mach_params mach_params;
+	const char *sof_tplg_filename;
+	const u32 tplg_quirk_mask;
+};
+
+#define SND_SOC_ACPI_MAX_CODECS 3
+
+/**
+ * struct snd_soc_acpi_codecs: Structure to hold secondary codec information
+ * apart from the matched one, this data will be passed to the quirk function
+ * to match with the ACPI detected devices
+ *
+ * @num_codecs: number of secondary codecs used in the platform
+ * @codecs: holds the codec IDs
+ *
+ */
+struct snd_soc_acpi_codecs {
+	int num_codecs;
+	u8 codecs[SND_SOC_ACPI_MAX_CODECS][ACPI_ID_LEN];
+};
+
+static inline bool snd_soc_acpi_sof_parent(struct device *dev)
+{
+	return dev->parent && dev->parent->driver && dev->parent->driver->name &&
+		!strncmp(dev->parent->driver->name, "sof-audio-acpi", strlen("sof-audio-acpi"));
+}
+
+#endif