Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 328 insertions, 0 deletions

diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
new file mode 100644
index 000000000..1a371a825
--- /dev/null
+++ b/include/xen/interface/memory.h
@@ -0,0 +1,328 @@
+/* SPDX-License-Identifier: MIT */
+/******************************************************************************
+ * memory.h
+ *
+ * Memory reservation and information.
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_MEMORY_H__
+#define __XEN_PUBLIC_MEMORY_H__
+
+#include <linux/spinlock.h>
+
+/*
+ * Increase or decrease the specified domain's memory reservation. Returns a
+ * -ve errcode on failure, or the # extents successfully allocated or freed.
+ * arg == addr of struct xen_memory_reservation.
+ */
+#define XENMEM_increase_reservation 0
+#define XENMEM_decrease_reservation 1
+#define XENMEM_populate_physmap     6
+struct xen_memory_reservation {
+
+    /*
+     * XENMEM_increase_reservation:
+     *   OUT: MFN (*not* GMFN) bases of extents that were allocated
+     * XENMEM_decrease_reservation:
+     *   IN:  GMFN bases of extents to free
+     * XENMEM_populate_physmap:
+     *   IN:  GPFN bases of extents to populate with memory
+     *   OUT: GMFN bases of extents that were allocated
+     *   (NB. This command also updates the mach_to_phys translation table)
+     */
+    GUEST_HANDLE(xen_pfn_t) extent_start;
+
+    /* Number of extents, and size/alignment of each (2^extent_order pages). */
+    xen_ulong_t  nr_extents;
+    unsigned int   extent_order;
+
+    /*
+     * Maximum # bits addressable by the user of the allocated region (e.g.,
+     * I/O devices often have a 32-bit limitation even in 64-bit systems). If
+     * zero then the user has no addressing restriction.
+     * This field is not used by XENMEM_decrease_reservation.
+     */
+    unsigned int   address_bits;
+
+    /*
+     * Domain whose reservation is being changed.
+     * Unprivileged domains can specify only DOMID_SELF.
+     */
+    domid_t        domid;
+
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation);
+
+/*
+ * An atomic exchange of memory pages. If return code is zero then
+ * @out.extent_list provides GMFNs of the newly-allocated memory.
+ * Returns zero on complete success, otherwise a negative error code.
+ * On complete success then always @nr_exchanged == @in.nr_extents.
+ * On partial success @nr_exchanged indicates how much work was done.
+ */
+#define XENMEM_exchange             11
+struct xen_memory_exchange {
+    /*
+     * [IN] Details of memory extents to be exchanged (GMFN bases).
+     * Note that @in.address_bits is ignored and unused.
+     */
+    struct xen_memory_reservation in;
+
+    /*
+     * [IN/OUT] Details of new memory extents.
+     * We require that:
+     *  1. @in.domid == @out.domid
+     *  2. @in.nr_extents  << @in.extent_order ==
+     *     @out.nr_extents << @out.extent_order
+     *  3. @in.extent_start and @out.extent_start lists must not overlap
+     *  4. @out.extent_start lists GPFN bases to be populated
+     *  5. @out.extent_start is overwritten with allocated GMFN bases
+     */
+    struct xen_memory_reservation out;
+
+    /*
+     * [OUT] Number of input extents that were successfully exchanged:
+     *  1. The first @nr_exchanged input extents were successfully
+     *     deallocated.
+     *  2. The corresponding first entries in the output extent list correctly
+     *     indicate the GMFNs that were successfully exchanged.
+     *  3. All other input and output extents are untouched.
+     *  4. If not all input exents are exchanged then the return code of this
+     *     command will be non-zero.
+     *  5. THIS FIELD MUST BE INITIALISED TO ZERO BY THE CALLER!
+     */
+    xen_ulong_t nr_exchanged;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_exchange);
+/*
+ * Returns the maximum machine frame number of mapped RAM in this system.
+ * This command always succeeds (it never returns an error code).
+ * arg == NULL.
+ */
+#define XENMEM_maximum_ram_page     2
+
+/*
+ * Returns the current or maximum memory reservation, in pages, of the
+ * specified domain (may be DOMID_SELF). Returns -ve errcode on failure.
+ * arg == addr of domid_t.
+ */
+#define XENMEM_current_reservation  3
+#define XENMEM_maximum_reservation  4
+
+/*
+ * Returns a list of MFN bases of 2MB extents comprising the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table do not implement
+ * this command.
+ * arg == addr of xen_machphys_mfn_list_t.
+ */
+#define XENMEM_machphys_mfn_list    5
+struct xen_machphys_mfn_list {
+    /*
+     * Size of the 'extent_start' array. Fewer entries will be filled if the
+     * machphys table is smaller than max_extents * 2MB.
+     */
+    unsigned int max_extents;
+
+    /*
+     * Pointer to buffer to fill with list of extent starts. If there are
+     * any large discontiguities in the machine address space, 2MB gaps in
+     * the machphys table will be represented by an MFN base of zero.
+     */
+    GUEST_HANDLE(xen_pfn_t) extent_start;
+
+    /*
+     * Number of extents written to the above array. This will be smaller
+     * than 'max_extents' if the machphys table is smaller than max_e * 2MB.
+     */
+    unsigned int nr_extents;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
+
+/*
+ * Returns the location in virtual address space of the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table, or which do not
+ * map it by default into guest address space, do not implement this command.
+ * arg == addr of xen_machphys_mapping_t.
+ */
+#define XENMEM_machphys_mapping     12
+struct xen_machphys_mapping {
+    xen_ulong_t v_start, v_end; /* Start and end virtual addresses.   */
+    xen_ulong_t max_mfn;        /* Maximum MFN that can be looked up. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t);
+
+#define XENMAPSPACE_shared_info  0 /* shared info page */
+#define XENMAPSPACE_grant_table  1 /* grant table page */
+#define XENMAPSPACE_gmfn         2 /* GMFN */
+#define XENMAPSPACE_gmfn_range   3 /* GMFN range, XENMEM_add_to_physmap only. */
+#define XENMAPSPACE_gmfn_foreign 4 /* GMFN from another dom,
+				    * XENMEM_add_to_physmap_range only.
+				    */
+#define XENMAPSPACE_dev_mmio     5 /* device mmio region */
+
+/*
+ * Sets the GPFN at which a particular page appears in the specified guest's
+ * pseudophysical address space.
+ * arg == addr of xen_add_to_physmap_t.
+ */
+#define XENMEM_add_to_physmap      7
+struct xen_add_to_physmap {
+    /* Which domain to change the mapping for. */
+    domid_t domid;
+
+    /* Number of pages to go through for gmfn_range */
+    uint16_t    size;
+
+    /* Source mapping space. */
+    unsigned int space;
+
+    /* Index into source mapping space. */
+    xen_ulong_t idx;
+
+    /* GPFN where the source mapping page should appear. */
+    xen_pfn_t gpfn;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap);
+
+/*** REMOVED ***/
+/*#define XENMEM_translate_gpfn_list  8*/
+
+#define XENMEM_add_to_physmap_range 23
+struct xen_add_to_physmap_range {
+    /* IN */
+    /* Which domain to change the mapping for. */
+    domid_t domid;
+    uint16_t space; /* => enum phys_map_space */
+
+    /* Number of pages to go through */
+    uint16_t size;
+    domid_t foreign_domid; /* IFF gmfn_foreign */
+
+    /* Indexes into space being mapped. */
+    GUEST_HANDLE(xen_ulong_t) idxs;
+
+    /* GPFN in domid where the source mapping page should appear. */
+    GUEST_HANDLE(xen_pfn_t) gpfns;
+
+    /* OUT */
+
+    /* Per index error code. */
+    GUEST_HANDLE(int) errs;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap_range);
+
+/*
+ * Returns the pseudo-physical memory map as it was when the domain
+ * was started (specified by XENMEM_set_memory_map).
+ * arg == addr of struct xen_memory_map.
+ */
+#define XENMEM_memory_map           9
+struct xen_memory_map {
+    /*
+     * On call the number of entries which can be stored in buffer. On
+     * return the number of entries which have been stored in
+     * buffer.
+     */
+    unsigned int nr_entries;
+
+    /*
+     * Entries in the buffer are in the same format as returned by the
+     * BIOS INT 0x15 EAX=0xE820 call.
+     */
+    GUEST_HANDLE(void) buffer;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_map);
+
+/*
+ * Returns the real physical memory map. Passes the same structure as
+ * XENMEM_memory_map.
+ * arg == addr of struct xen_memory_map.
+ */
+#define XENMEM_machine_memory_map   10
+
+
+/*
+ * Unmaps the page appearing at a particular GPFN from the specified guest's
+ * pseudophysical address space.
+ * arg == addr of xen_remove_from_physmap_t.
+ */
+#define XENMEM_remove_from_physmap      15
+struct xen_remove_from_physmap {
+    /* Which domain to change the mapping for. */
+    domid_t domid;
+
+    /* GPFN of the current mapping of the page. */
+    xen_pfn_t gpfn;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_remove_from_physmap);
+
+/*
+ * Get the pages for a particular guest resource, so that they can be
+ * mapped directly by a tools domain.
+ */
+#define XENMEM_acquire_resource 28
+struct xen_mem_acquire_resource {
+    /* IN - The domain whose resource is to be mapped */
+    domid_t domid;
+    /* IN - the type of resource */
+    uint16_t type;
+
+#define XENMEM_resource_ioreq_server 0
+#define XENMEM_resource_grant_table 1
+
+    /*
+     * IN - a type-specific resource identifier, which must be zero
+     *      unless stated otherwise.
+     *
+     * type == XENMEM_resource_ioreq_server -> id == ioreq server id
+     * type == XENMEM_resource_grant_table -> id defined below
+     */
+    uint32_t id;
+
+#define XENMEM_resource_grant_table_id_shared 0
+#define XENMEM_resource_grant_table_id_status 1
+
+    /* IN/OUT - As an IN parameter number of frames of the resource
+     *          to be mapped. However, if the specified value is 0 and
+     *          frame_list is NULL then this field will be set to the
+     *          maximum value supported by the implementation on return.
+     */
+    uint32_t nr_frames;
+    /*
+     * OUT - Must be zero on entry. On return this may contain a bitwise
+     *       OR of the following values.
+     */
+    uint32_t flags;
+
+    /* The resource pages have been assigned to the calling domain */
+#define _XENMEM_rsrc_acq_caller_owned 0
+#define XENMEM_rsrc_acq_caller_owned (1u << _XENMEM_rsrc_acq_caller_owned)
+
+    /*
+     * IN - the index of the initial frame to be mapped. This parameter
+     *      is ignored if nr_frames is 0.
+     */
+    uint64_t frame;
+
+#define XENMEM_resource_ioreq_server_frame_bufioreq 0
+#define XENMEM_resource_ioreq_server_frame_ioreq(n) (1 + (n))
+
+    /*
+     * IN/OUT - If the tools domain is PV then, upon return, frame_list
+     *          will be populated with the MFNs of the resource.
+     *          If the tools domain is HVM then it is expected that, on
+     *          entry, frame_list will be populated with a list of GFNs
+     *          that will be mapped to the MFNs of the resource.
+     *          If -EIO is returned then the frame_list has only been
+     *          partially mapped and it is up to the caller to unmap all
+     *          the GFNs.
+     *          This parameter may be NULL if nr_frames is 0.
+     */
+    GUEST_HANDLE(xen_pfn_t) frame_list;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_mem_acquire_resource);
+
+#endif /* __XEN_PUBLIC_MEMORY_H__ */