Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 442 insertions, 0 deletions

diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c
new file mode 100644
index 000000000..6ea80ae42
--- /dev/null
+++ b/kernel/dma/contiguous.c
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Contiguous Memory Allocator for DMA mapping framework
+ * Copyright (c) 2010-2011 by Samsung Electronics.
+ * Written by:
+ *	Marek Szyprowski <m.szyprowski@samsung.com>
+ *	Michal Nazarewicz <mina86@mina86.com>
+ *
+ * Contiguous Memory Allocator
+ *
+ *   The Contiguous Memory Allocator (CMA) makes it possible to
+ *   allocate big contiguous chunks of memory after the system has
+ *   booted.
+ *
+ * Why is it needed?
+ *
+ *   Various devices on embedded systems have no scatter-getter and/or
+ *   IO map support and require contiguous blocks of memory to
+ *   operate.  They include devices such as cameras, hardware video
+ *   coders, etc.
+ *
+ *   Such devices often require big memory buffers (a full HD frame
+ *   is, for instance, more than 2 mega pixels large, i.e. more than 6
+ *   MB of memory), which makes mechanisms such as kmalloc() or
+ *   alloc_page() ineffective.
+ *
+ *   At the same time, a solution where a big memory region is
+ *   reserved for a device is suboptimal since often more memory is
+ *   reserved then strictly required and, moreover, the memory is
+ *   inaccessible to page system even if device drivers don't use it.
+ *
+ *   CMA tries to solve this issue by operating on memory regions
+ *   where only movable pages can be allocated from.  This way, kernel
+ *   can use the memory for pagecache and when device driver requests
+ *   it, allocated pages can be migrated.
+ */
+
+#define pr_fmt(fmt) "cma: " fmt
+
+#ifdef CONFIG_CMA_DEBUG
+#ifndef DEBUG
+#  define DEBUG
+#endif
+#endif
+
+#include <asm/page.h>
+
+#include <linux/memblock.h>
+#include <linux/err.h>
+#include <linux/sizes.h>
+#include <linux/dma-map-ops.h>
+#include <linux/cma.h>
+
+#ifdef CONFIG_CMA_SIZE_MBYTES
+#define CMA_SIZE_MBYTES CONFIG_CMA_SIZE_MBYTES
+#else
+#define CMA_SIZE_MBYTES 0
+#endif
+
+struct cma *dma_contiguous_default_area;
+
+/*
+ * Default global CMA area size can be defined in kernel's .config.
+ * This is useful mainly for distro maintainers to create a kernel
+ * that works correctly for most supported systems.
+ * The size can be set in bytes or as a percentage of the total memory
+ * in the system.
+ *
+ * Users, who want to set the size of global CMA area for their system
+ * should use cma= kernel parameter.
+ */
+static const phys_addr_t size_bytes __initconst =
+	(phys_addr_t)CMA_SIZE_MBYTES * SZ_1M;
+static phys_addr_t  size_cmdline __initdata = -1;
+static phys_addr_t base_cmdline __initdata;
+static phys_addr_t limit_cmdline __initdata;
+
+static int __init early_cma(char *p)
+{
+	if (!p) {
+		pr_err("Config string not provided\n");
+		return -EINVAL;
+	}
+
+	size_cmdline = memparse(p, &p);
+	if (*p != '@')
+		return 0;
+	base_cmdline = memparse(p + 1, &p);
+	if (*p != '-') {
+		limit_cmdline = base_cmdline + size_cmdline;
+		return 0;
+	}
+	limit_cmdline = memparse(p + 1, &p);
+
+	return 0;
+}
+early_param("cma", early_cma);
+
+#ifdef CONFIG_DMA_PERNUMA_CMA
+
+static struct cma *dma_contiguous_pernuma_area[MAX_NUMNODES];
+static phys_addr_t pernuma_size_bytes __initdata;
+
+static int __init early_cma_pernuma(char *p)
+{
+	pernuma_size_bytes = memparse(p, &p);
+	return 0;
+}
+early_param("cma_pernuma", early_cma_pernuma);
+#endif
+
+#ifdef CONFIG_CMA_SIZE_PERCENTAGE
+
+static phys_addr_t __init __maybe_unused cma_early_percent_memory(void)
+{
+	unsigned long total_pages = PHYS_PFN(memblock_phys_mem_size());
+
+	return (total_pages * CONFIG_CMA_SIZE_PERCENTAGE / 100) << PAGE_SHIFT;
+}
+
+#else
+
+static inline __maybe_unused phys_addr_t cma_early_percent_memory(void)
+{
+	return 0;
+}
+
+#endif
+
+#ifdef CONFIG_DMA_PERNUMA_CMA
+void __init dma_pernuma_cma_reserve(void)
+{
+	int nid;
+
+	if (!pernuma_size_bytes)
+		return;
+
+	for_each_online_node(nid) {
+		int ret;
+		char name[CMA_MAX_NAME];
+		struct cma **cma = &dma_contiguous_pernuma_area[nid];
+
+		snprintf(name, sizeof(name), "pernuma%d", nid);
+		ret = cma_declare_contiguous_nid(0, pernuma_size_bytes, 0, 0,
+						 0, false, name, cma, nid);
+		if (ret) {
+			pr_warn("%s: reservation failed: err %d, node %d", __func__,
+				ret, nid);
+			continue;
+		}
+
+		pr_debug("%s: reserved %llu MiB on node %d\n", __func__,
+			(unsigned long long)pernuma_size_bytes / SZ_1M, nid);
+	}
+}
+#endif
+
+/**
+ * dma_contiguous_reserve() - reserve area(s) for contiguous memory handling
+ * @limit: End address of the reserved memory (optional, 0 for any).
+ *
+ * This function reserves memory from early allocator. It should be
+ * called by arch specific code once the early allocator (memblock or bootmem)
+ * has been activated and all other subsystems have already allocated/reserved
+ * memory.
+ */
+void __init dma_contiguous_reserve(phys_addr_t limit)
+{
+	phys_addr_t selected_size = 0;
+	phys_addr_t selected_base = 0;
+	phys_addr_t selected_limit = limit;
+	bool fixed = false;
+
+	pr_debug("%s(limit %08lx)\n", __func__, (unsigned long)limit);
+
+	if (size_cmdline != -1) {
+		selected_size = size_cmdline;
+		selected_base = base_cmdline;
+		selected_limit = min_not_zero(limit_cmdline, limit);
+		if (base_cmdline + size_cmdline == limit_cmdline)
+			fixed = true;
+	} else {
+#ifdef CONFIG_CMA_SIZE_SEL_MBYTES
+		selected_size = size_bytes;
+#elif defined(CONFIG_CMA_SIZE_SEL_PERCENTAGE)
+		selected_size = cma_early_percent_memory();
+#elif defined(CONFIG_CMA_SIZE_SEL_MIN)
+		selected_size = min(size_bytes, cma_early_percent_memory());
+#elif defined(CONFIG_CMA_SIZE_SEL_MAX)
+		selected_size = max(size_bytes, cma_early_percent_memory());
+#endif
+	}
+
+	if (selected_size && !dma_contiguous_default_area) {
+		pr_debug("%s: reserving %ld MiB for global area\n", __func__,
+			 (unsigned long)selected_size / SZ_1M);
+
+		dma_contiguous_reserve_area(selected_size, selected_base,
+					    selected_limit,
+					    &dma_contiguous_default_area,
+					    fixed);
+	}
+}
+
+void __weak
+dma_contiguous_early_fixup(phys_addr_t base, unsigned long size)
+{
+}
+
+/**
+ * dma_contiguous_reserve_area() - reserve custom contiguous area
+ * @size: Size of the reserved area (in bytes),
+ * @base: Base address of the reserved area optional, use 0 for any
+ * @limit: End address of the reserved memory (optional, 0 for any).
+ * @res_cma: Pointer to store the created cma region.
+ * @fixed: hint about where to place the reserved area
+ *
+ * This function reserves memory from early allocator. It should be
+ * called by arch specific code once the early allocator (memblock or bootmem)
+ * has been activated and all other subsystems have already allocated/reserved
+ * memory. This function allows to create custom reserved areas for specific
+ * devices.
+ *
+ * If @fixed is true, reserve contiguous area at exactly @base.  If false,
+ * reserve in range from @base to @limit.
+ */
+int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base,
+				       phys_addr_t limit, struct cma **res_cma,
+				       bool fixed)
+{
+	int ret;
+
+	ret = cma_declare_contiguous(base, size, limit, 0, 0, fixed,
+					"reserved", res_cma);
+	if (ret)
+		return ret;
+
+	/* Architecture specific contiguous memory fixup. */
+	dma_contiguous_early_fixup(cma_get_base(*res_cma),
+				cma_get_size(*res_cma));
+
+	return 0;
+}
+
+/**
+ * dma_alloc_from_contiguous() - allocate pages from contiguous area
+ * @dev:   Pointer to device for which the allocation is performed.
+ * @count: Requested number of pages.
+ * @align: Requested alignment of pages (in PAGE_SIZE order).
+ * @no_warn: Avoid printing message about failed allocation.
+ *
+ * This function allocates memory buffer for specified device. It uses
+ * device specific contiguous memory area if available or the default
+ * global one. Requires architecture specific dev_get_cma_area() helper
+ * function.
+ */
+struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
+				       unsigned int align, bool no_warn)
+{
+	if (align > CONFIG_CMA_ALIGNMENT)
+		align = CONFIG_CMA_ALIGNMENT;
+
+	return cma_alloc(dev_get_cma_area(dev), count, align, no_warn);
+}
+
+/**
+ * dma_release_from_contiguous() - release allocated pages
+ * @dev:   Pointer to device for which the pages were allocated.
+ * @pages: Allocated pages.
+ * @count: Number of allocated pages.
+ *
+ * This function releases memory allocated by dma_alloc_from_contiguous().
+ * It returns false when provided pages do not belong to contiguous area and
+ * true otherwise.
+ */
+bool dma_release_from_contiguous(struct device *dev, struct page *pages,
+				 int count)
+{
+	return cma_release(dev_get_cma_area(dev), pages, count);
+}
+
+static struct page *cma_alloc_aligned(struct cma *cma, size_t size, gfp_t gfp)
+{
+	unsigned int align = min(get_order(size), CONFIG_CMA_ALIGNMENT);
+
+	return cma_alloc(cma, size >> PAGE_SHIFT, align, gfp & __GFP_NOWARN);
+}
+
+/**
+ * dma_alloc_contiguous() - allocate contiguous pages
+ * @dev:   Pointer to device for which the allocation is performed.
+ * @size:  Requested allocation size.
+ * @gfp:   Allocation flags.
+ *
+ * tries to use device specific contiguous memory area if available, or it
+ * tries to use per-numa cma, if the allocation fails, it will fallback to
+ * try default global one.
+ *
+ * Note that it bypass one-page size of allocations from the per-numa and
+ * global area as the addresses within one page are always contiguous, so
+ * there is no need to waste CMA pages for that kind; it also helps reduce
+ * fragmentations.
+ */
+struct page *dma_alloc_contiguous(struct device *dev, size_t size, gfp_t gfp)
+{
+#ifdef CONFIG_DMA_PERNUMA_CMA
+	int nid = dev_to_node(dev);
+#endif
+
+	/* CMA can be used only in the context which permits sleeping */
+	if (!gfpflags_allow_blocking(gfp))
+		return NULL;
+	if (dev->cma_area)
+		return cma_alloc_aligned(dev->cma_area, size, gfp);
+	if (size <= PAGE_SIZE)
+		return NULL;
+
+#ifdef CONFIG_DMA_PERNUMA_CMA
+	if (nid != NUMA_NO_NODE && !(gfp & (GFP_DMA | GFP_DMA32))) {
+		struct cma *cma = dma_contiguous_pernuma_area[nid];
+		struct page *page;
+
+		if (cma) {
+			page = cma_alloc_aligned(cma, size, gfp);
+			if (page)
+				return page;
+		}
+	}
+#endif
+	if (!dma_contiguous_default_area)
+		return NULL;
+
+	return cma_alloc_aligned(dma_contiguous_default_area, size, gfp);
+}
+
+/**
+ * dma_free_contiguous() - release allocated pages
+ * @dev:   Pointer to device for which the pages were allocated.
+ * @page:  Pointer to the allocated pages.
+ * @size:  Size of allocated pages.
+ *
+ * This function releases memory allocated by dma_alloc_contiguous(). As the
+ * cma_release returns false when provided pages do not belong to contiguous
+ * area and true otherwise, this function then does a fallback __free_pages()
+ * upon a false-return.
+ */
+void dma_free_contiguous(struct device *dev, struct page *page, size_t size)
+{
+	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+
+	/* if dev has its own cma, free page from there */
+	if (dev->cma_area) {
+		if (cma_release(dev->cma_area, page, count))
+			return;
+	} else {
+		/*
+		 * otherwise, page is from either per-numa cma or default cma
+		 */
+#ifdef CONFIG_DMA_PERNUMA_CMA
+		if (cma_release(dma_contiguous_pernuma_area[page_to_nid(page)],
+					page, count))
+			return;
+#endif
+		if (cma_release(dma_contiguous_default_area, page, count))
+			return;
+	}
+
+	/* not in any cma, free from buddy */
+	__free_pages(page, get_order(size));
+}
+
+/*
+ * Support for reserved memory regions defined in device tree
+ */
+#ifdef CONFIG_OF_RESERVED_MEM
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_reserved_mem.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) fmt
+
+static int rmem_cma_device_init(struct reserved_mem *rmem, struct device *dev)
+{
+	dev->cma_area = rmem->priv;
+	return 0;
+}
+
+static void rmem_cma_device_release(struct reserved_mem *rmem,
+				    struct device *dev)
+{
+	dev->cma_area = NULL;
+}
+
+static const struct reserved_mem_ops rmem_cma_ops = {
+	.device_init	= rmem_cma_device_init,
+	.device_release = rmem_cma_device_release,
+};
+
+static int __init rmem_cma_setup(struct reserved_mem *rmem)
+{
+	unsigned long node = rmem->fdt_node;
+	bool default_cma = of_get_flat_dt_prop(node, "linux,cma-default", NULL);
+	struct cma *cma;
+	int err;
+
+	if (size_cmdline != -1 && default_cma) {
+		pr_info("Reserved memory: bypass %s node, using cmdline CMA params instead\n",
+			rmem->name);
+		return -EBUSY;
+	}
+
+	if (!of_get_flat_dt_prop(node, "reusable", NULL) ||
+	    of_get_flat_dt_prop(node, "no-map", NULL))
+		return -EINVAL;
+
+	if (!IS_ALIGNED(rmem->base | rmem->size, CMA_MIN_ALIGNMENT_BYTES)) {
+		pr_err("Reserved memory: incorrect alignment of CMA region\n");
+		return -EINVAL;
+	}
+
+	err = cma_init_reserved_mem(rmem->base, rmem->size, 0, rmem->name, &cma);
+	if (err) {
+		pr_err("Reserved memory: unable to setup CMA region\n");
+		return err;
+	}
+	/* Architecture specific contiguous memory fixup. */
+	dma_contiguous_early_fixup(rmem->base, rmem->size);
+
+	if (default_cma)
+		dma_contiguous_default_area = cma;
+
+	rmem->ops = &rmem_cma_ops;
+	rmem->priv = cma;
+
+	pr_info("Reserved memory: created CMA memory pool at %pa, size %ld MiB\n",
+		&rmem->base, (unsigned long)rmem->size / SZ_1M);
+
+	return 0;
+}
+RESERVEDMEM_OF_DECLARE(cma, "shared-dma-pool", rmem_cma_setup);
+#endif