Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 436 insertions, 0 deletions

diff --git a/kernel/gcov/gcc_4_7.c b/kernel/gcov/gcc_4_7.c
new file mode 100644
index 000000000..74a4ef1da
--- /dev/null
+++ b/kernel/gcov/gcc_4_7.c
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  This code provides functions to handle gcc's profiling data format
+ *  introduced with gcc 4.7.
+ *
+ *  This file is based heavily on gcc_3_4.c file.
+ *
+ *  For a better understanding, refer to gcc source:
+ *  gcc/gcov-io.h
+ *  libgcc/libgcov.c
+ *
+ *  Uses gcc-internal data definitions.
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include "gcov.h"
+
+#if (__GNUC__ >= 10)
+#define GCOV_COUNTERS			8
+#elif (__GNUC__ >= 7)
+#define GCOV_COUNTERS			9
+#elif (__GNUC__ > 5) || (__GNUC__ == 5 && __GNUC_MINOR__ >= 1)
+#define GCOV_COUNTERS			10
+#else
+#define GCOV_COUNTERS			9
+#endif
+
+#define GCOV_TAG_FUNCTION_LENGTH	3
+
+/* Since GCC 12.1 sizes are in BYTES and not in WORDS (4B). */
+#if (__GNUC__ >= 12)
+#define GCOV_UNIT_SIZE				4
+#else
+#define GCOV_UNIT_SIZE				1
+#endif
+
+static struct gcov_info *gcov_info_head;
+
+/**
+ * struct gcov_ctr_info - information about counters for a single function
+ * @num: number of counter values for this type
+ * @values: array of counter values for this type
+ *
+ * This data is generated by gcc during compilation and doesn't change
+ * at run-time with the exception of the values array.
+ */
+struct gcov_ctr_info {
+	unsigned int num;
+	gcov_type *values;
+};
+
+/**
+ * struct gcov_fn_info - profiling meta data per function
+ * @key: comdat key
+ * @ident: unique ident of function
+ * @lineno_checksum: function lineo_checksum
+ * @cfg_checksum: function cfg checksum
+ * @ctrs: instrumented counters
+ *
+ * This data is generated by gcc during compilation and doesn't change
+ * at run-time.
+ *
+ * Information about a single function.  This uses the trailing array
+ * idiom. The number of counters is determined from the merge pointer
+ * array in gcov_info.  The key is used to detect which of a set of
+ * comdat functions was selected -- it points to the gcov_info object
+ * of the object file containing the selected comdat function.
+ */
+struct gcov_fn_info {
+	const struct gcov_info *key;
+	unsigned int ident;
+	unsigned int lineno_checksum;
+	unsigned int cfg_checksum;
+	struct gcov_ctr_info ctrs[];
+};
+
+/**
+ * struct gcov_info - profiling data per object file
+ * @version: gcov version magic indicating the gcc version used for compilation
+ * @next: list head for a singly-linked list
+ * @stamp: uniquifying time stamp
+ * @checksum: unique object checksum
+ * @filename: name of the associated gcov data file
+ * @merge: merge functions (null for unused counter type)
+ * @n_functions: number of instrumented functions
+ * @functions: pointer to pointers to function information
+ *
+ * This data is generated by gcc during compilation and doesn't change
+ * at run-time with the exception of the next pointer.
+ */
+struct gcov_info {
+	unsigned int version;
+	struct gcov_info *next;
+	unsigned int stamp;
+ /* Since GCC 12.1 a checksum field is added. */
+#if (__GNUC__ >= 12)
+	unsigned int checksum;
+#endif
+	const char *filename;
+	void (*merge[GCOV_COUNTERS])(gcov_type *, unsigned int);
+	unsigned int n_functions;
+	struct gcov_fn_info **functions;
+};
+
+/**
+ * gcov_info_filename - return info filename
+ * @info: profiling data set
+ */
+const char *gcov_info_filename(struct gcov_info *info)
+{
+	return info->filename;
+}
+
+/**
+ * gcov_info_version - return info version
+ * @info: profiling data set
+ */
+unsigned int gcov_info_version(struct gcov_info *info)
+{
+	return info->version;
+}
+
+/**
+ * gcov_info_next - return next profiling data set
+ * @info: profiling data set
+ *
+ * Returns next gcov_info following @info or first gcov_info in the chain if
+ * @info is %NULL.
+ */
+struct gcov_info *gcov_info_next(struct gcov_info *info)
+{
+	if (!info)
+		return gcov_info_head;
+
+	return info->next;
+}
+
+/**
+ * gcov_info_link - link/add profiling data set to the list
+ * @info: profiling data set
+ */
+void gcov_info_link(struct gcov_info *info)
+{
+	info->next = gcov_info_head;
+	gcov_info_head = info;
+}
+
+/**
+ * gcov_info_unlink - unlink/remove profiling data set from the list
+ * @prev: previous profiling data set
+ * @info: profiling data set
+ */
+void gcov_info_unlink(struct gcov_info *prev, struct gcov_info *info)
+{
+	if (prev)
+		prev->next = info->next;
+	else
+		gcov_info_head = info->next;
+}
+
+/**
+ * gcov_info_within_module - check if a profiling data set belongs to a module
+ * @info: profiling data set
+ * @mod: module
+ *
+ * Returns true if profiling data belongs module, false otherwise.
+ */
+bool gcov_info_within_module(struct gcov_info *info, struct module *mod)
+{
+	return within_module((unsigned long)info, mod);
+}
+
+/* Symbolic links to be created for each profiling data file. */
+const struct gcov_link gcov_link[] = {
+	{ OBJ_TREE, "gcno" },	/* Link to .gcno file in $(objtree). */
+	{ 0, NULL},
+};
+
+/*
+ * Determine whether a counter is active. Doesn't change at run-time.
+ */
+static int counter_active(struct gcov_info *info, unsigned int type)
+{
+	return info->merge[type] ? 1 : 0;
+}
+
+/* Determine number of active counters. Based on gcc magic. */
+static unsigned int num_counter_active(struct gcov_info *info)
+{
+	unsigned int i;
+	unsigned int result = 0;
+
+	for (i = 0; i < GCOV_COUNTERS; i++) {
+		if (counter_active(info, i))
+			result++;
+	}
+	return result;
+}
+
+/**
+ * gcov_info_reset - reset profiling data to zero
+ * @info: profiling data set
+ */
+void gcov_info_reset(struct gcov_info *info)
+{
+	struct gcov_ctr_info *ci_ptr;
+	unsigned int fi_idx;
+	unsigned int ct_idx;
+
+	for (fi_idx = 0; fi_idx < info->n_functions; fi_idx++) {
+		ci_ptr = info->functions[fi_idx]->ctrs;
+
+		for (ct_idx = 0; ct_idx < GCOV_COUNTERS; ct_idx++) {
+			if (!counter_active(info, ct_idx))
+				continue;
+
+			memset(ci_ptr->values, 0,
+					sizeof(gcov_type) * ci_ptr->num);
+			ci_ptr++;
+		}
+	}
+}
+
+/**
+ * gcov_info_is_compatible - check if profiling data can be added
+ * @info1: first profiling data set
+ * @info2: second profiling data set
+ *
+ * Returns non-zero if profiling data can be added, zero otherwise.
+ */
+int gcov_info_is_compatible(struct gcov_info *info1, struct gcov_info *info2)
+{
+	return (info1->stamp == info2->stamp);
+}
+
+/**
+ * gcov_info_add - add up profiling data
+ * @dst: profiling data set to which data is added
+ * @src: profiling data set which is added
+ *
+ * Adds profiling counts of @src to @dst.
+ */
+void gcov_info_add(struct gcov_info *dst, struct gcov_info *src)
+{
+	struct gcov_ctr_info *dci_ptr;
+	struct gcov_ctr_info *sci_ptr;
+	unsigned int fi_idx;
+	unsigned int ct_idx;
+	unsigned int val_idx;
+
+	for (fi_idx = 0; fi_idx < src->n_functions; fi_idx++) {
+		dci_ptr = dst->functions[fi_idx]->ctrs;
+		sci_ptr = src->functions[fi_idx]->ctrs;
+
+		for (ct_idx = 0; ct_idx < GCOV_COUNTERS; ct_idx++) {
+			if (!counter_active(src, ct_idx))
+				continue;
+
+			for (val_idx = 0; val_idx < sci_ptr->num; val_idx++)
+				dci_ptr->values[val_idx] +=
+					sci_ptr->values[val_idx];
+
+			dci_ptr++;
+			sci_ptr++;
+		}
+	}
+}
+
+/**
+ * gcov_info_dup - duplicate profiling data set
+ * @info: profiling data set to duplicate
+ *
+ * Return newly allocated duplicate on success, %NULL on error.
+ */
+struct gcov_info *gcov_info_dup(struct gcov_info *info)
+{
+	struct gcov_info *dup;
+	struct gcov_ctr_info *dci_ptr; /* dst counter info */
+	struct gcov_ctr_info *sci_ptr; /* src counter info */
+	unsigned int active;
+	unsigned int fi_idx; /* function info idx */
+	unsigned int ct_idx; /* counter type idx */
+	size_t fi_size; /* function info size */
+	size_t cv_size; /* counter values size */
+
+	dup = kmemdup(info, sizeof(*dup), GFP_KERNEL);
+	if (!dup)
+		return NULL;
+
+	dup->next = NULL;
+	dup->filename = NULL;
+	dup->functions = NULL;
+
+	dup->filename = kstrdup(info->filename, GFP_KERNEL);
+	if (!dup->filename)
+		goto err_free;
+
+	dup->functions = kcalloc(info->n_functions,
+				 sizeof(struct gcov_fn_info *), GFP_KERNEL);
+	if (!dup->functions)
+		goto err_free;
+
+	active = num_counter_active(info);
+	fi_size = sizeof(struct gcov_fn_info);
+	fi_size += sizeof(struct gcov_ctr_info) * active;
+
+	for (fi_idx = 0; fi_idx < info->n_functions; fi_idx++) {
+		dup->functions[fi_idx] = kzalloc(fi_size, GFP_KERNEL);
+		if (!dup->functions[fi_idx])
+			goto err_free;
+
+		*(dup->functions[fi_idx]) = *(info->functions[fi_idx]);
+
+		sci_ptr = info->functions[fi_idx]->ctrs;
+		dci_ptr = dup->functions[fi_idx]->ctrs;
+
+		for (ct_idx = 0; ct_idx < active; ct_idx++) {
+
+			cv_size = sizeof(gcov_type) * sci_ptr->num;
+
+			dci_ptr->values = kvmalloc(cv_size, GFP_KERNEL);
+
+			if (!dci_ptr->values)
+				goto err_free;
+
+			dci_ptr->num = sci_ptr->num;
+			memcpy(dci_ptr->values, sci_ptr->values, cv_size);
+
+			sci_ptr++;
+			dci_ptr++;
+		}
+	}
+
+	return dup;
+err_free:
+	gcov_info_free(dup);
+	return NULL;
+}
+
+/**
+ * gcov_info_free - release memory for profiling data set duplicate
+ * @info: profiling data set duplicate to free
+ */
+void gcov_info_free(struct gcov_info *info)
+{
+	unsigned int active;
+	unsigned int fi_idx;
+	unsigned int ct_idx;
+	struct gcov_ctr_info *ci_ptr;
+
+	if (!info->functions)
+		goto free_info;
+
+	active = num_counter_active(info);
+
+	for (fi_idx = 0; fi_idx < info->n_functions; fi_idx++) {
+		if (!info->functions[fi_idx])
+			continue;
+
+		ci_ptr = info->functions[fi_idx]->ctrs;
+
+		for (ct_idx = 0; ct_idx < active; ct_idx++, ci_ptr++)
+			kvfree(ci_ptr->values);
+
+		kfree(info->functions[fi_idx]);
+	}
+
+free_info:
+	kfree(info->functions);
+	kfree(info->filename);
+	kfree(info);
+}
+
+/**
+ * convert_to_gcda - convert profiling data set to gcda file format
+ * @buffer: the buffer to store file data or %NULL if no data should be stored
+ * @info: profiling data set to be converted
+ *
+ * Returns the number of bytes that were/would have been stored into the buffer.
+ */
+size_t convert_to_gcda(char *buffer, struct gcov_info *info)
+{
+	struct gcov_fn_info *fi_ptr;
+	struct gcov_ctr_info *ci_ptr;
+	unsigned int fi_idx;
+	unsigned int ct_idx;
+	unsigned int cv_idx;
+	size_t pos = 0;
+
+	/* File header. */
+	pos += store_gcov_u32(buffer, pos, GCOV_DATA_MAGIC);
+	pos += store_gcov_u32(buffer, pos, info->version);
+	pos += store_gcov_u32(buffer, pos, info->stamp);
+
+#if (__GNUC__ >= 12)
+	/* Use zero as checksum of the compilation unit. */
+	pos += store_gcov_u32(buffer, pos, 0);
+#endif
+
+	for (fi_idx = 0; fi_idx < info->n_functions; fi_idx++) {
+		fi_ptr = info->functions[fi_idx];
+
+		/* Function record. */
+		pos += store_gcov_u32(buffer, pos, GCOV_TAG_FUNCTION);
+		pos += store_gcov_u32(buffer, pos,
+			GCOV_TAG_FUNCTION_LENGTH * GCOV_UNIT_SIZE);
+		pos += store_gcov_u32(buffer, pos, fi_ptr->ident);
+		pos += store_gcov_u32(buffer, pos, fi_ptr->lineno_checksum);
+		pos += store_gcov_u32(buffer, pos, fi_ptr->cfg_checksum);
+
+		ci_ptr = fi_ptr->ctrs;
+
+		for (ct_idx = 0; ct_idx < GCOV_COUNTERS; ct_idx++) {
+			if (!counter_active(info, ct_idx))
+				continue;
+
+			/* Counter record. */
+			pos += store_gcov_u32(buffer, pos,
+					      GCOV_TAG_FOR_COUNTER(ct_idx));
+			pos += store_gcov_u32(buffer, pos,
+				ci_ptr->num * 2 * GCOV_UNIT_SIZE);
+
+			for (cv_idx = 0; cv_idx < ci_ptr->num; cv_idx++) {
+				pos += store_gcov_u64(buffer, pos,
+						      ci_ptr->values[cv_idx]);
+			}
+
+			ci_ptr++;
+		}
+	}
+
+	return pos;
+}