Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 242 insertions, 0 deletions

diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
new file mode 100644
index 000000000..9489f93b3
--- /dev/null
+++ b/kernel/irq/handle.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
+ * Copyright (C) 2005-2006, Thomas Gleixner, Russell King
+ *
+ * This file contains the core interrupt handling code. Detailed
+ * information is available in Documentation/core-api/genericirq.rst
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/irq_regs.h>
+
+#include <trace/events/irq.h>
+
+#include "internals.h"
+
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#endif
+
+/**
+ * handle_bad_irq - handle spurious and unhandled irqs
+ * @desc:      description of the interrupt
+ *
+ * Handles spurious and unhandled IRQ's. It also prints a debugmessage.
+ */
+void handle_bad_irq(struct irq_desc *desc)
+{
+	unsigned int irq = irq_desc_get_irq(desc);
+
+	print_irq_desc(irq, desc);
+	kstat_incr_irqs_this_cpu(desc);
+	ack_bad_irq(irq);
+}
+EXPORT_SYMBOL_GPL(handle_bad_irq);
+
+/*
+ * Special, empty irq handler:
+ */
+irqreturn_t no_action(int cpl, void *dev_id)
+{
+	return IRQ_NONE;
+}
+EXPORT_SYMBOL_GPL(no_action);
+
+static void warn_no_thread(unsigned int irq, struct irqaction *action)
+{
+	if (test_and_set_bit(IRQTF_WARNED, &action->thread_flags))
+		return;
+
+	printk(KERN_WARNING "IRQ %d device %s returned IRQ_WAKE_THREAD "
+	       "but no thread function available.", irq, action->name);
+}
+
+void __irq_wake_thread(struct irq_desc *desc, struct irqaction *action)
+{
+	/*
+	 * In case the thread crashed and was killed we just pretend that
+	 * we handled the interrupt. The hardirq handler has disabled the
+	 * device interrupt, so no irq storm is lurking.
+	 */
+	if (action->thread->flags & PF_EXITING)
+		return;
+
+	/*
+	 * Wake up the handler thread for this action. If the
+	 * RUNTHREAD bit is already set, nothing to do.
+	 */
+	if (test_and_set_bit(IRQTF_RUNTHREAD, &action->thread_flags))
+		return;
+
+	/*
+	 * It's safe to OR the mask lockless here. We have only two
+	 * places which write to threads_oneshot: This code and the
+	 * irq thread.
+	 *
+	 * This code is the hard irq context and can never run on two
+	 * cpus in parallel. If it ever does we have more serious
+	 * problems than this bitmask.
+	 *
+	 * The irq threads of this irq which clear their "running" bit
+	 * in threads_oneshot are serialized via desc->lock against
+	 * each other and they are serialized against this code by
+	 * IRQS_INPROGRESS.
+	 *
+	 * Hard irq handler:
+	 *
+	 *	spin_lock(desc->lock);
+	 *	desc->state |= IRQS_INPROGRESS;
+	 *	spin_unlock(desc->lock);
+	 *	set_bit(IRQTF_RUNTHREAD, &action->thread_flags);
+	 *	desc->threads_oneshot |= mask;
+	 *	spin_lock(desc->lock);
+	 *	desc->state &= ~IRQS_INPROGRESS;
+	 *	spin_unlock(desc->lock);
+	 *
+	 * irq thread:
+	 *
+	 * again:
+	 *	spin_lock(desc->lock);
+	 *	if (desc->state & IRQS_INPROGRESS) {
+	 *		spin_unlock(desc->lock);
+	 *		while(desc->state & IRQS_INPROGRESS)
+	 *			cpu_relax();
+	 *		goto again;
+	 *	}
+	 *	if (!test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
+	 *		desc->threads_oneshot &= ~mask;
+	 *	spin_unlock(desc->lock);
+	 *
+	 * So either the thread waits for us to clear IRQS_INPROGRESS
+	 * or we are waiting in the flow handler for desc->lock to be
+	 * released before we reach this point. The thread also checks
+	 * IRQTF_RUNTHREAD under desc->lock. If set it leaves
+	 * threads_oneshot untouched and runs the thread another time.
+	 */
+	desc->threads_oneshot |= action->thread_mask;
+
+	/*
+	 * We increment the threads_active counter in case we wake up
+	 * the irq thread. The irq thread decrements the counter when
+	 * it returns from the handler or in the exit path and wakes
+	 * up waiters which are stuck in synchronize_irq() when the
+	 * active count becomes zero. synchronize_irq() is serialized
+	 * against this code (hard irq handler) via IRQS_INPROGRESS
+	 * like the finalize_oneshot() code. See comment above.
+	 */
+	atomic_inc(&desc->threads_active);
+
+	wake_up_process(action->thread);
+}
+
+irqreturn_t __handle_irq_event_percpu(struct irq_desc *desc)
+{
+	irqreturn_t retval = IRQ_NONE;
+	unsigned int irq = desc->irq_data.irq;
+	struct irqaction *action;
+
+	record_irq_time(desc);
+
+	for_each_action_of_desc(desc, action) {
+		irqreturn_t res;
+
+		/*
+		 * If this IRQ would be threaded under force_irqthreads, mark it so.
+		 */
+		if (irq_settings_can_thread(desc) &&
+		    !(action->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT)))
+			lockdep_hardirq_threaded();
+
+		trace_irq_handler_entry(irq, action);
+		res = action->handler(irq, action->dev_id);
+		trace_irq_handler_exit(irq, action, res);
+
+		if (WARN_ONCE(!irqs_disabled(),"irq %u handler %pS enabled interrupts\n",
+			      irq, action->handler))
+			local_irq_disable();
+
+		switch (res) {
+		case IRQ_WAKE_THREAD:
+			/*
+			 * Catch drivers which return WAKE_THREAD but
+			 * did not set up a thread function
+			 */
+			if (unlikely(!action->thread_fn)) {
+				warn_no_thread(irq, action);
+				break;
+			}
+
+			__irq_wake_thread(desc, action);
+			break;
+
+		default:
+			break;
+		}
+
+		retval |= res;
+	}
+
+	return retval;
+}
+
+irqreturn_t handle_irq_event_percpu(struct irq_desc *desc)
+{
+	irqreturn_t retval;
+
+	retval = __handle_irq_event_percpu(desc);
+
+	add_interrupt_randomness(desc->irq_data.irq);
+
+	if (!irq_settings_no_debug(desc))
+		note_interrupt(desc, retval);
+	return retval;
+}
+
+irqreturn_t handle_irq_event(struct irq_desc *desc)
+{
+	irqreturn_t ret;
+
+	desc->istate &= ~IRQS_PENDING;
+	irqd_set(&desc->irq_data, IRQD_IRQ_INPROGRESS);
+	raw_spin_unlock(&desc->lock);
+
+	ret = handle_irq_event_percpu(desc);
+
+	raw_spin_lock(&desc->lock);
+	irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
+	return ret;
+}
+
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+int __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+	if (handle_arch_irq)
+		return -EBUSY;
+
+	handle_arch_irq = handle_irq;
+	return 0;
+}
+
+/**
+ * generic_handle_arch_irq - root irq handler for architectures which do no
+ *                           entry accounting themselves
+ * @regs:	Register file coming from the low-level handling code
+ */
+asmlinkage void noinstr generic_handle_arch_irq(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+
+	irq_enter();
+	old_regs = set_irq_regs(regs);
+	handle_arch_irq(regs);
+	set_irq_regs(old_regs);
+	irq_exit();
+}
+#endif