Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 596 insertions, 0 deletions

diff --git a/kernel/locking/qspinlock.c b/kernel/locking/qspinlock.c
new file mode 100644
index 000000000..ebe6b8ec7
--- /dev/null
+++ b/kernel/locking/qspinlock.c
@@ -0,0 +1,596 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Queued spinlock
+ *
+ * (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P.
+ * (C) Copyright 2013-2014,2018 Red Hat, Inc.
+ * (C) Copyright 2015 Intel Corp.
+ * (C) Copyright 2015 Hewlett-Packard Enterprise Development LP
+ *
+ * Authors: Waiman Long <longman@redhat.com>
+ *          Peter Zijlstra <peterz@infradead.org>
+ */
+
+#ifndef _GEN_PV_LOCK_SLOWPATH
+
+#include <linux/smp.h>
+#include <linux/bug.h>
+#include <linux/cpumask.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <linux/mutex.h>
+#include <linux/prefetch.h>
+#include <asm/byteorder.h>
+#include <asm/qspinlock.h>
+#include <trace/events/lock.h>
+
+/*
+ * Include queued spinlock statistics code
+ */
+#include "qspinlock_stat.h"
+
+/*
+ * The basic principle of a queue-based spinlock can best be understood
+ * by studying a classic queue-based spinlock implementation called the
+ * MCS lock. A copy of the original MCS lock paper ("Algorithms for Scalable
+ * Synchronization on Shared-Memory Multiprocessors by Mellor-Crummey and
+ * Scott") is available at
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=206115
+ *
+ * This queued spinlock implementation is based on the MCS lock, however to
+ * make it fit the 4 bytes we assume spinlock_t to be, and preserve its
+ * existing API, we must modify it somehow.
+ *
+ * In particular; where the traditional MCS lock consists of a tail pointer
+ * (8 bytes) and needs the next pointer (another 8 bytes) of its own node to
+ * unlock the next pending (next->locked), we compress both these: {tail,
+ * next->locked} into a single u32 value.
+ *
+ * Since a spinlock disables recursion of its own context and there is a limit
+ * to the contexts that can nest; namely: task, softirq, hardirq, nmi. As there
+ * are at most 4 nesting levels, it can be encoded by a 2-bit number. Now
+ * we can encode the tail by combining the 2-bit nesting level with the cpu
+ * number. With one byte for the lock value and 3 bytes for the tail, only a
+ * 32-bit word is now needed. Even though we only need 1 bit for the lock,
+ * we extend it to a full byte to achieve better performance for architectures
+ * that support atomic byte write.
+ *
+ * We also change the first spinner to spin on the lock bit instead of its
+ * node; whereby avoiding the need to carry a node from lock to unlock, and
+ * preserving existing lock API. This also makes the unlock code simpler and
+ * faster.
+ *
+ * N.B. The current implementation only supports architectures that allow
+ *      atomic operations on smaller 8-bit and 16-bit data types.
+ *
+ */
+
+#include "mcs_spinlock.h"
+#define MAX_NODES	4
+
+/*
+ * On 64-bit architectures, the mcs_spinlock structure will be 16 bytes in
+ * size and four of them will fit nicely in one 64-byte cacheline. For
+ * pvqspinlock, however, we need more space for extra data. To accommodate
+ * that, we insert two more long words to pad it up to 32 bytes. IOW, only
+ * two of them can fit in a cacheline in this case. That is OK as it is rare
+ * to have more than 2 levels of slowpath nesting in actual use. We don't
+ * want to penalize pvqspinlocks to optimize for a rare case in native
+ * qspinlocks.
+ */
+struct qnode {
+	struct mcs_spinlock mcs;
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+	long reserved[2];
+#endif
+};
+
+/*
+ * The pending bit spinning loop count.
+ * This heuristic is used to limit the number of lockword accesses
+ * made by atomic_cond_read_relaxed when waiting for the lock to
+ * transition out of the "== _Q_PENDING_VAL" state. We don't spin
+ * indefinitely because there's no guarantee that we'll make forward
+ * progress.
+ */
+#ifndef _Q_PENDING_LOOPS
+#define _Q_PENDING_LOOPS	1
+#endif
+
+/*
+ * Per-CPU queue node structures; we can never have more than 4 nested
+ * contexts: task, softirq, hardirq, nmi.
+ *
+ * Exactly fits one 64-byte cacheline on a 64-bit architecture.
+ *
+ * PV doubles the storage and uses the second cacheline for PV state.
+ */
+static DEFINE_PER_CPU_ALIGNED(struct qnode, qnodes[MAX_NODES]);
+
+/*
+ * We must be able to distinguish between no-tail and the tail at 0:0,
+ * therefore increment the cpu number by one.
+ */
+
+static inline __pure u32 encode_tail(int cpu, int idx)
+{
+	u32 tail;
+
+	tail  = (cpu + 1) << _Q_TAIL_CPU_OFFSET;
+	tail |= idx << _Q_TAIL_IDX_OFFSET; /* assume < 4 */
+
+	return tail;
+}
+
+static inline __pure struct mcs_spinlock *decode_tail(u32 tail)
+{
+	int cpu = (tail >> _Q_TAIL_CPU_OFFSET) - 1;
+	int idx = (tail &  _Q_TAIL_IDX_MASK) >> _Q_TAIL_IDX_OFFSET;
+
+	return per_cpu_ptr(&qnodes[idx].mcs, cpu);
+}
+
+static inline __pure
+struct mcs_spinlock *grab_mcs_node(struct mcs_spinlock *base, int idx)
+{
+	return &((struct qnode *)base + idx)->mcs;
+}
+
+#define _Q_LOCKED_PENDING_MASK (_Q_LOCKED_MASK | _Q_PENDING_MASK)
+
+#if _Q_PENDING_BITS == 8
+/**
+ * clear_pending - clear the pending bit.
+ * @lock: Pointer to queued spinlock structure
+ *
+ * *,1,* -> *,0,*
+ */
+static __always_inline void clear_pending(struct qspinlock *lock)
+{
+	WRITE_ONCE(lock->pending, 0);
+}
+
+/**
+ * clear_pending_set_locked - take ownership and clear the pending bit.
+ * @lock: Pointer to queued spinlock structure
+ *
+ * *,1,0 -> *,0,1
+ *
+ * Lock stealing is not allowed if this function is used.
+ */
+static __always_inline void clear_pending_set_locked(struct qspinlock *lock)
+{
+	WRITE_ONCE(lock->locked_pending, _Q_LOCKED_VAL);
+}
+
+/*
+ * xchg_tail - Put in the new queue tail code word & retrieve previous one
+ * @lock : Pointer to queued spinlock structure
+ * @tail : The new queue tail code word
+ * Return: The previous queue tail code word
+ *
+ * xchg(lock, tail), which heads an address dependency
+ *
+ * p,*,* -> n,*,* ; prev = xchg(lock, node)
+ */
+static __always_inline u32 xchg_tail(struct qspinlock *lock, u32 tail)
+{
+	/*
+	 * We can use relaxed semantics since the caller ensures that the
+	 * MCS node is properly initialized before updating the tail.
+	 */
+	return (u32)xchg_relaxed(&lock->tail,
+				 tail >> _Q_TAIL_OFFSET) << _Q_TAIL_OFFSET;
+}
+
+#else /* _Q_PENDING_BITS == 8 */
+
+/**
+ * clear_pending - clear the pending bit.
+ * @lock: Pointer to queued spinlock structure
+ *
+ * *,1,* -> *,0,*
+ */
+static __always_inline void clear_pending(struct qspinlock *lock)
+{
+	atomic_andnot(_Q_PENDING_VAL, &lock->val);
+}
+
+/**
+ * clear_pending_set_locked - take ownership and clear the pending bit.
+ * @lock: Pointer to queued spinlock structure
+ *
+ * *,1,0 -> *,0,1
+ */
+static __always_inline void clear_pending_set_locked(struct qspinlock *lock)
+{
+	atomic_add(-_Q_PENDING_VAL + _Q_LOCKED_VAL, &lock->val);
+}
+
+/**
+ * xchg_tail - Put in the new queue tail code word & retrieve previous one
+ * @lock : Pointer to queued spinlock structure
+ * @tail : The new queue tail code word
+ * Return: The previous queue tail code word
+ *
+ * xchg(lock, tail)
+ *
+ * p,*,* -> n,*,* ; prev = xchg(lock, node)
+ */
+static __always_inline u32 xchg_tail(struct qspinlock *lock, u32 tail)
+{
+	u32 old, new, val = atomic_read(&lock->val);
+
+	for (;;) {
+		new = (val & _Q_LOCKED_PENDING_MASK) | tail;
+		/*
+		 * We can use relaxed semantics since the caller ensures that
+		 * the MCS node is properly initialized before updating the
+		 * tail.
+		 */
+		old = atomic_cmpxchg_relaxed(&lock->val, val, new);
+		if (old == val)
+			break;
+
+		val = old;
+	}
+	return old;
+}
+#endif /* _Q_PENDING_BITS == 8 */
+
+/**
+ * queued_fetch_set_pending_acquire - fetch the whole lock value and set pending
+ * @lock : Pointer to queued spinlock structure
+ * Return: The previous lock value
+ *
+ * *,*,* -> *,1,*
+ */
+#ifndef queued_fetch_set_pending_acquire
+static __always_inline u32 queued_fetch_set_pending_acquire(struct qspinlock *lock)
+{
+	return atomic_fetch_or_acquire(_Q_PENDING_VAL, &lock->val);
+}
+#endif
+
+/**
+ * set_locked - Set the lock bit and own the lock
+ * @lock: Pointer to queued spinlock structure
+ *
+ * *,*,0 -> *,0,1
+ */
+static __always_inline void set_locked(struct qspinlock *lock)
+{
+	WRITE_ONCE(lock->locked, _Q_LOCKED_VAL);
+}
+
+
+/*
+ * Generate the native code for queued_spin_unlock_slowpath(); provide NOPs for
+ * all the PV callbacks.
+ */
+
+static __always_inline void __pv_init_node(struct mcs_spinlock *node) { }
+static __always_inline void __pv_wait_node(struct mcs_spinlock *node,
+					   struct mcs_spinlock *prev) { }
+static __always_inline void __pv_kick_node(struct qspinlock *lock,
+					   struct mcs_spinlock *node) { }
+static __always_inline u32  __pv_wait_head_or_lock(struct qspinlock *lock,
+						   struct mcs_spinlock *node)
+						   { return 0; }
+
+#define pv_enabled()		false
+
+#define pv_init_node		__pv_init_node
+#define pv_wait_node		__pv_wait_node
+#define pv_kick_node		__pv_kick_node
+#define pv_wait_head_or_lock	__pv_wait_head_or_lock
+
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+#define queued_spin_lock_slowpath	native_queued_spin_lock_slowpath
+#endif
+
+#endif /* _GEN_PV_LOCK_SLOWPATH */
+
+/**
+ * queued_spin_lock_slowpath - acquire the queued spinlock
+ * @lock: Pointer to queued spinlock structure
+ * @val: Current value of the queued spinlock 32-bit word
+ *
+ * (queue tail, pending bit, lock value)
+ *
+ *              fast     :    slow                                  :    unlock
+ *                       :                                          :
+ * uncontended  (0,0,0) -:--> (0,0,1) ------------------------------:--> (*,*,0)
+ *                       :       | ^--------.------.             /  :
+ *                       :       v           \      \            |  :
+ * pending               :    (0,1,1) +--> (0,1,0)   \           |  :
+ *                       :       | ^--'              |           |  :
+ *                       :       v                   |           |  :
+ * uncontended           :    (n,x,y) +--> (n,0,0) --'           |  :
+ *   queue               :       | ^--'                          |  :
+ *                       :       v                               |  :
+ * contended             :    (*,x,y) +--> (*,0,0) ---> (*,0,1) -'  :
+ *   queue               :         ^--'                             :
+ */
+void __lockfunc queued_spin_lock_slowpath(struct qspinlock *lock, u32 val)
+{
+	struct mcs_spinlock *prev, *next, *node;
+	u32 old, tail;
+	int idx;
+
+	BUILD_BUG_ON(CONFIG_NR_CPUS >= (1U << _Q_TAIL_CPU_BITS));
+
+	if (pv_enabled())
+		goto pv_queue;
+
+	if (virt_spin_lock(lock))
+		return;
+
+	/*
+	 * Wait for in-progress pending->locked hand-overs with a bounded
+	 * number of spins so that we guarantee forward progress.
+	 *
+	 * 0,1,0 -> 0,0,1
+	 */
+	if (val == _Q_PENDING_VAL) {
+		int cnt = _Q_PENDING_LOOPS;
+		val = atomic_cond_read_relaxed(&lock->val,
+					       (VAL != _Q_PENDING_VAL) || !cnt--);
+	}
+
+	/*
+	 * If we observe any contention; queue.
+	 */
+	if (val & ~_Q_LOCKED_MASK)
+		goto queue;
+
+	/*
+	 * trylock || pending
+	 *
+	 * 0,0,* -> 0,1,* -> 0,0,1 pending, trylock
+	 */
+	val = queued_fetch_set_pending_acquire(lock);
+
+	/*
+	 * If we observe contention, there is a concurrent locker.
+	 *
+	 * Undo and queue; our setting of PENDING might have made the
+	 * n,0,0 -> 0,0,0 transition fail and it will now be waiting
+	 * on @next to become !NULL.
+	 */
+	if (unlikely(val & ~_Q_LOCKED_MASK)) {
+
+		/* Undo PENDING if we set it. */
+		if (!(val & _Q_PENDING_MASK))
+			clear_pending(lock);
+
+		goto queue;
+	}
+
+	/*
+	 * We're pending, wait for the owner to go away.
+	 *
+	 * 0,1,1 -> *,1,0
+	 *
+	 * this wait loop must be a load-acquire such that we match the
+	 * store-release that clears the locked bit and create lock
+	 * sequentiality; this is because not all
+	 * clear_pending_set_locked() implementations imply full
+	 * barriers.
+	 */
+	if (val & _Q_LOCKED_MASK)
+		smp_cond_load_acquire(&lock->locked, !VAL);
+
+	/*
+	 * take ownership and clear the pending bit.
+	 *
+	 * 0,1,0 -> 0,0,1
+	 */
+	clear_pending_set_locked(lock);
+	lockevent_inc(lock_pending);
+	return;
+
+	/*
+	 * End of pending bit optimistic spinning and beginning of MCS
+	 * queuing.
+	 */
+queue:
+	lockevent_inc(lock_slowpath);
+pv_queue:
+	node = this_cpu_ptr(&qnodes[0].mcs);
+	idx = node->count++;
+	tail = encode_tail(smp_processor_id(), idx);
+
+	trace_contention_begin(lock, LCB_F_SPIN);
+
+	/*
+	 * 4 nodes are allocated based on the assumption that there will
+	 * not be nested NMIs taking spinlocks. That may not be true in
+	 * some architectures even though the chance of needing more than
+	 * 4 nodes will still be extremely unlikely. When that happens,
+	 * we fall back to spinning on the lock directly without using
+	 * any MCS node. This is not the most elegant solution, but is
+	 * simple enough.
+	 */
+	if (unlikely(idx >= MAX_NODES)) {
+		lockevent_inc(lock_no_node);
+		while (!queued_spin_trylock(lock))
+			cpu_relax();
+		goto release;
+	}
+
+	node = grab_mcs_node(node, idx);
+
+	/*
+	 * Keep counts of non-zero index values:
+	 */
+	lockevent_cond_inc(lock_use_node2 + idx - 1, idx);
+
+	/*
+	 * Ensure that we increment the head node->count before initialising
+	 * the actual node. If the compiler is kind enough to reorder these
+	 * stores, then an IRQ could overwrite our assignments.
+	 */
+	barrier();
+
+	node->locked = 0;
+	node->next = NULL;
+	pv_init_node(node);
+
+	/*
+	 * We touched a (possibly) cold cacheline in the per-cpu queue node;
+	 * attempt the trylock once more in the hope someone let go while we
+	 * weren't watching.
+	 */
+	if (queued_spin_trylock(lock))
+		goto release;
+
+	/*
+	 * Ensure that the initialisation of @node is complete before we
+	 * publish the updated tail via xchg_tail() and potentially link
+	 * @node into the waitqueue via WRITE_ONCE(prev->next, node) below.
+	 */
+	smp_wmb();
+
+	/*
+	 * Publish the updated tail.
+	 * We have already touched the queueing cacheline; don't bother with
+	 * pending stuff.
+	 *
+	 * p,*,* -> n,*,*
+	 */
+	old = xchg_tail(lock, tail);
+	next = NULL;
+
+	/*
+	 * if there was a previous node; link it and wait until reaching the
+	 * head of the waitqueue.
+	 */
+	if (old & _Q_TAIL_MASK) {
+		prev = decode_tail(old);
+
+		/* Link @node into the waitqueue. */
+		WRITE_ONCE(prev->next, node);
+
+		pv_wait_node(node, prev);
+		arch_mcs_spin_lock_contended(&node->locked);
+
+		/*
+		 * While waiting for the MCS lock, the next pointer may have
+		 * been set by another lock waiter. We optimistically load
+		 * the next pointer & prefetch the cacheline for writing
+		 * to reduce latency in the upcoming MCS unlock operation.
+		 */
+		next = READ_ONCE(node->next);
+		if (next)
+			prefetchw(next);
+	}
+
+	/*
+	 * we're at the head of the waitqueue, wait for the owner & pending to
+	 * go away.
+	 *
+	 * *,x,y -> *,0,0
+	 *
+	 * this wait loop must use a load-acquire such that we match the
+	 * store-release that clears the locked bit and create lock
+	 * sequentiality; this is because the set_locked() function below
+	 * does not imply a full barrier.
+	 *
+	 * The PV pv_wait_head_or_lock function, if active, will acquire
+	 * the lock and return a non-zero value. So we have to skip the
+	 * atomic_cond_read_acquire() call. As the next PV queue head hasn't
+	 * been designated yet, there is no way for the locked value to become
+	 * _Q_SLOW_VAL. So both the set_locked() and the
+	 * atomic_cmpxchg_relaxed() calls will be safe.
+	 *
+	 * If PV isn't active, 0 will be returned instead.
+	 *
+	 */
+	if ((val = pv_wait_head_or_lock(lock, node)))
+		goto locked;
+
+	val = atomic_cond_read_acquire(&lock->val, !(VAL & _Q_LOCKED_PENDING_MASK));
+
+locked:
+	/*
+	 * claim the lock:
+	 *
+	 * n,0,0 -> 0,0,1 : lock, uncontended
+	 * *,*,0 -> *,*,1 : lock, contended
+	 *
+	 * If the queue head is the only one in the queue (lock value == tail)
+	 * and nobody is pending, clear the tail code and grab the lock.
+	 * Otherwise, we only need to grab the lock.
+	 */
+
+	/*
+	 * In the PV case we might already have _Q_LOCKED_VAL set, because
+	 * of lock stealing; therefore we must also allow:
+	 *
+	 * n,0,1 -> 0,0,1
+	 *
+	 * Note: at this point: (val & _Q_PENDING_MASK) == 0, because of the
+	 *       above wait condition, therefore any concurrent setting of
+	 *       PENDING will make the uncontended transition fail.
+	 */
+	if ((val & _Q_TAIL_MASK) == tail) {
+		if (atomic_try_cmpxchg_relaxed(&lock->val, &val, _Q_LOCKED_VAL))
+			goto release; /* No contention */
+	}
+
+	/*
+	 * Either somebody is queued behind us or _Q_PENDING_VAL got set
+	 * which will then detect the remaining tail and queue behind us
+	 * ensuring we'll see a @next.
+	 */
+	set_locked(lock);
+
+	/*
+	 * contended path; wait for next if not observed yet, release.
+	 */
+	if (!next)
+		next = smp_cond_load_relaxed(&node->next, (VAL));
+
+	arch_mcs_spin_unlock_contended(&next->locked);
+	pv_kick_node(lock, next);
+
+release:
+	trace_contention_end(lock, 0);
+
+	/*
+	 * release the node
+	 */
+	__this_cpu_dec(qnodes[0].mcs.count);
+}
+EXPORT_SYMBOL(queued_spin_lock_slowpath);
+
+/*
+ * Generate the paravirt code for queued_spin_unlock_slowpath().
+ */
+#if !defined(_GEN_PV_LOCK_SLOWPATH) && defined(CONFIG_PARAVIRT_SPINLOCKS)
+#define _GEN_PV_LOCK_SLOWPATH
+
+#undef  pv_enabled
+#define pv_enabled()	true
+
+#undef pv_init_node
+#undef pv_wait_node
+#undef pv_kick_node
+#undef pv_wait_head_or_lock
+
+#undef  queued_spin_lock_slowpath
+#define queued_spin_lock_slowpath	__pv_queued_spin_lock_slowpath
+
+#include "qspinlock_paravirt.h"
+#include "qspinlock.c"
+
+bool nopvspin __initdata;
+static __init int parse_nopvspin(char *arg)
+{
+	nopvspin = true;
+	return 0;
+}
+early_param("nopvspin", parse_nopvspin);
+#endif