Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 294 insertions, 0 deletions

diff --git a/kernel/module/Kconfig b/kernel/module/Kconfig
new file mode 100644
index 000000000..424b3bc58
--- /dev/null
+++ b/kernel/module/Kconfig
@@ -0,0 +1,294 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig MODULES
+	bool "Enable loadable module support"
+	modules
+	help
+	  Kernel modules are small pieces of compiled code which can
+	  be inserted in the running kernel, rather than being
+	  permanently built into the kernel.  You use the "modprobe"
+	  tool to add (and sometimes remove) them.  If you say Y here,
+	  many parts of the kernel can be built as modules (by
+	  answering M instead of Y where indicated): this is most
+	  useful for infrequently used options which are not required
+	  for booting.  For more information, see the man pages for
+	  modprobe, lsmod, modinfo, insmod and rmmod.
+
+	  If you say Y here, you will need to run "make
+	  modules_install" to put the modules under /lib/modules/
+	  where modprobe can find them (you may need to be root to do
+	  this).
+
+	  If unsure, say Y.
+
+if MODULES
+
+config MODULE_FORCE_LOAD
+	bool "Forced module loading"
+	default n
+	help
+	  Allow loading of modules without version information (ie. modprobe
+	  --force).  Forced module loading sets the 'F' (forced) taint flag and
+	  is usually a really bad idea.
+
+config MODULE_UNLOAD
+	bool "Module unloading"
+	help
+	  Without this option you will not be able to unload any
+	  modules (note that some modules may not be unloadable
+	  anyway), which makes your kernel smaller, faster
+	  and simpler.  If unsure, say Y.
+
+config MODULE_FORCE_UNLOAD
+	bool "Forced module unloading"
+	depends on MODULE_UNLOAD
+	help
+	  This option allows you to force a module to unload, even if the
+	  kernel believes it is unsafe: the kernel will remove the module
+	  without waiting for anyone to stop using it (using the -f option to
+	  rmmod).  This is mainly for kernel developers and desperate users.
+	  If unsure, say N.
+
+config MODULE_UNLOAD_TAINT_TRACKING
+	bool "Tainted module unload tracking"
+	depends on MODULE_UNLOAD
+	default n
+	help
+	  This option allows you to maintain a record of each unloaded
+	  module that tainted the kernel. In addition to displaying a
+	  list of linked (or loaded) modules e.g. on detection of a bad
+	  page (see bad_page()), the aforementioned details are also
+	  shown. If unsure, say N.
+
+config MODVERSIONS
+	bool "Module versioning support"
+	help
+	  Usually, you have to use modules compiled with your kernel.
+	  Saying Y here makes it sometimes possible to use modules
+	  compiled for different kernels, by adding enough information
+	  to the modules to (hopefully) spot any changes which would
+	  make them incompatible with the kernel you are running.  If
+	  unsure, say N.
+
+config ASM_MODVERSIONS
+	bool
+	default HAVE_ASM_MODVERSIONS && MODVERSIONS
+	help
+	  This enables module versioning for exported symbols also from
+	  assembly. This can be enabled only when the target architecture
+	  supports it.
+
+config MODULE_SRCVERSION_ALL
+	bool "Source checksum for all modules"
+	help
+	  Modules which contain a MODULE_VERSION get an extra "srcversion"
+	  field inserted into their modinfo section, which contains a
+	  sum of the source files which made it.  This helps maintainers
+	  see exactly which source was used to build a module (since
+	  others sometimes change the module source without updating
+	  the version).  With this option, such a "srcversion" field
+	  will be created for all modules.  If unsure, say N.
+
+config MODULE_SIG
+	bool "Module signature verification"
+	select MODULE_SIG_FORMAT
+	help
+	  Check modules for valid signatures upon load: the signature
+	  is simply appended to the module. For more information see
+	  <file:Documentation/admin-guide/module-signing.rst>.
+
+	  Note that this option adds the OpenSSL development packages as a
+	  kernel build dependency so that the signing tool can use its crypto
+	  library.
+
+	  You should enable this option if you wish to use either
+	  CONFIG_SECURITY_LOCKDOWN_LSM or lockdown functionality imposed via
+	  another LSM - otherwise unsigned modules will be loadable regardless
+	  of the lockdown policy.
+
+	  !!!WARNING!!!  If you enable this option, you MUST make sure that the
+	  module DOES NOT get stripped after being signed.  This includes the
+	  debuginfo strip done by some packagers (such as rpmbuild) and
+	  inclusion into an initramfs that wants the module size reduced.
+
+config MODULE_SIG_FORCE
+	bool "Require modules to be validly signed"
+	depends on MODULE_SIG
+	help
+	  Reject unsigned modules or signed modules for which we don't have a
+	  key.  Without this, such modules will simply taint the kernel.
+
+config MODULE_SIG_ALL
+	bool "Automatically sign all modules"
+	default y
+	depends on MODULE_SIG || IMA_APPRAISE_MODSIG
+	help
+	  Sign all modules during make modules_install. Without this option,
+	  modules must be signed manually, using the scripts/sign-file tool.
+
+comment "Do not forget to sign required modules with scripts/sign-file"
+	depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL
+
+choice
+	prompt "Which hash algorithm should modules be signed with?"
+	depends on MODULE_SIG || IMA_APPRAISE_MODSIG
+	help
+	  This determines which sort of hashing algorithm will be used during
+	  signature generation.  This algorithm _must_ be built into the kernel
+	  directly so that signature verification can take place.  It is not
+	  possible to load a signed module containing the algorithm to check
+	  the signature on that module.
+
+config MODULE_SIG_SHA1
+	bool "Sign modules with SHA-1"
+	select CRYPTO_SHA1
+
+config MODULE_SIG_SHA224
+	bool "Sign modules with SHA-224"
+	select CRYPTO_SHA256
+
+config MODULE_SIG_SHA256
+	bool "Sign modules with SHA-256"
+	select CRYPTO_SHA256
+
+config MODULE_SIG_SHA384
+	bool "Sign modules with SHA-384"
+	select CRYPTO_SHA512
+
+config MODULE_SIG_SHA512
+	bool "Sign modules with SHA-512"
+	select CRYPTO_SHA512
+
+endchoice
+
+config MODULE_SIG_HASH
+	string
+	depends on MODULE_SIG || IMA_APPRAISE_MODSIG
+	default "sha1" if MODULE_SIG_SHA1
+	default "sha224" if MODULE_SIG_SHA224
+	default "sha256" if MODULE_SIG_SHA256
+	default "sha384" if MODULE_SIG_SHA384
+	default "sha512" if MODULE_SIG_SHA512
+
+choice
+	prompt "Module compression mode"
+	help
+	  This option allows you to choose the algorithm which will be used to
+	  compress modules when 'make modules_install' is run. (or, you can
+	  choose to not compress modules at all.)
+
+	  External modules will also be compressed in the same way during the
+	  installation.
+
+	  For modules inside an initrd or initramfs, it's more efficient to
+	  compress the whole initrd or initramfs instead.
+
+	  This is fully compatible with signed modules.
+
+	  Please note that the tool used to load modules needs to support the
+	  corresponding algorithm. module-init-tools MAY support gzip, and kmod
+	  MAY support gzip, xz and zstd.
+
+	  Your build system needs to provide the appropriate compression tool
+	  to compress the modules.
+
+	  If in doubt, select 'None'.
+
+config MODULE_COMPRESS_NONE
+	bool "None"
+	help
+	  Do not compress modules. The installed modules are suffixed
+	  with .ko.
+
+config MODULE_COMPRESS_GZIP
+	bool "GZIP"
+	help
+	  Compress modules with GZIP. The installed modules are suffixed
+	  with .ko.gz.
+
+config MODULE_COMPRESS_XZ
+	bool "XZ"
+	help
+	  Compress modules with XZ. The installed modules are suffixed
+	  with .ko.xz.
+
+config MODULE_COMPRESS_ZSTD
+	bool "ZSTD"
+	help
+	  Compress modules with ZSTD. The installed modules are suffixed
+	  with .ko.zst.
+
+endchoice
+
+config MODULE_DECOMPRESS
+	bool "Support in-kernel module decompression"
+	depends on MODULE_COMPRESS_GZIP || MODULE_COMPRESS_XZ || MODULE_COMPRESS_ZSTD
+	select ZLIB_INFLATE if MODULE_COMPRESS_GZIP
+	select XZ_DEC if MODULE_COMPRESS_XZ
+	select ZSTD_DECOMPRESS if MODULE_COMPRESS_ZSTD
+	help
+
+	  Support for decompressing kernel modules by the kernel itself
+	  instead of relying on userspace to perform this task. Useful when
+	  load pinning security policy is enabled.
+
+	  If unsure, say N.
+
+config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
+	bool "Allow loading of modules with missing namespace imports"
+	help
+	  Symbols exported with EXPORT_SYMBOL_NS*() are considered exported in
+	  a namespace. A module that makes use of a symbol exported with such a
+	  namespace is required to import the namespace via MODULE_IMPORT_NS().
+	  There is no technical reason to enforce correct namespace imports,
+	  but it creates consistency between symbols defining namespaces and
+	  users importing namespaces they make use of. This option relaxes this
+	  requirement and lifts the enforcement when loading a module.
+
+	  If unsure, say N.
+
+config MODPROBE_PATH
+	string "Path to modprobe binary"
+	default "/sbin/modprobe"
+	help
+	  When kernel code requests a module, it does so by calling
+	  the "modprobe" userspace utility. This option allows you to
+	  set the path where that binary is found. This can be changed
+	  at runtime via the sysctl file
+	  /proc/sys/kernel/modprobe. Setting this to the empty string
+	  removes the kernel's ability to request modules (but
+	  userspace can still load modules explicitly).
+
+config TRIM_UNUSED_KSYMS
+	bool "Trim unused exported kernel symbols" if EXPERT
+	depends on !COMPILE_TEST
+	help
+	  The kernel and some modules make many symbols available for
+	  other modules to use via EXPORT_SYMBOL() and variants. Depending
+	  on the set of modules being selected in your kernel configuration,
+	  many of those exported symbols might never be used.
+
+	  This option allows for unused exported symbols to be dropped from
+	  the build. In turn, this provides the compiler more opportunities
+	  (especially when using LTO) for optimizing the code and reducing
+	  binary size.  This might have some security advantages as well.
+
+	  If unsure, or if you need to build out-of-tree modules, say N.
+
+config UNUSED_KSYMS_WHITELIST
+	string "Whitelist of symbols to keep in ksymtab"
+	depends on TRIM_UNUSED_KSYMS
+	help
+	  By default, all unused exported symbols will be un-exported from the
+	  build when TRIM_UNUSED_KSYMS is selected.
+
+	  UNUSED_KSYMS_WHITELIST allows to whitelist symbols that must be kept
+	  exported at all times, even in absence of in-tree users. The value to
+	  set here is the path to a text file containing the list of symbols,
+	  one per line. The path can be absolute, or relative to the kernel
+	  source tree.
+
+config MODULES_TREE_LOOKUP
+	def_bool y
+	depends on PERF_EVENTS || TRACING || CFI_CLANG
+
+endif # MODULES