Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 352 insertions, 0 deletions

diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
new file mode 100644
index 000000000..4b31629c5
--- /dev/null
+++ b/kernel/power/Kconfig
@@ -0,0 +1,352 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SUSPEND
+	bool "Suspend to RAM and standby"
+	depends on ARCH_SUSPEND_POSSIBLE
+	default y
+	help
+	  Allow the system to enter sleep states in which main memory is
+	  powered and thus its contents are preserved, such as the
+	  suspend-to-RAM state (e.g. the ACPI S3 state).
+
+config SUSPEND_FREEZER
+	bool "Enable freezer for suspend to RAM/standby" \
+		if ARCH_WANTS_FREEZER_CONTROL || BROKEN
+	depends on SUSPEND
+	default y
+	help
+	  This allows you to turn off the freezer for suspend. If this is
+	  done, no tasks are frozen for suspend to RAM/standby.
+
+	  Turning OFF this setting is NOT recommended! If in doubt, say Y.
+
+config SUSPEND_SKIP_SYNC
+	bool "Skip kernel's sys_sync() on suspend to RAM/standby"
+	depends on SUSPEND
+	depends on EXPERT
+	help
+	  Skip the kernel sys_sync() before freezing user processes.
+	  Some systems prefer not to pay this cost on every invocation
+	  of suspend, or they are content with invoking sync() from
+	  user-space before invoking suspend.  There's a run-time switch
+	  at '/sys/power/sync_on_suspend' to configure this behaviour.
+	  This setting changes the default for the run-tim switch. Say Y
+	  to change the default to disable the kernel sys_sync().
+
+config HIBERNATE_CALLBACKS
+	bool
+
+config HIBERNATION
+	bool "Hibernation (aka 'suspend to disk')"
+	depends on SWAP && ARCH_HIBERNATION_POSSIBLE
+	select HIBERNATE_CALLBACKS
+	select LZO_COMPRESS
+	select LZO_DECOMPRESS
+	select CRC32
+	help
+	  Enable the suspend to disk (STD) functionality, which is usually
+	  called "hibernation" in user interfaces.  STD checkpoints the
+	  system and powers it off; and restores that checkpoint on reboot.
+
+	  You can suspend your machine with 'echo disk > /sys/power/state'
+	  after placing resume=/dev/swappartition on the kernel command line
+	  in your bootloader's configuration file.
+
+	  Alternatively, you can use the additional userland tools available
+	  from <http://suspend.sf.net>.
+
+	  In principle it does not require ACPI or APM, although for example
+	  ACPI will be used for the final steps when it is available.  One
+	  of the reasons to use software suspend is that the firmware hooks
+	  for suspend states like suspend-to-RAM (STR) often don't work very
+	  well with Linux.
+
+	  It creates an image which is saved in your active swap. Upon the next
+	  boot, pass the 'resume=/dev/swappartition' argument to the kernel to
+	  have it detect the saved image, restore memory state from it, and
+	  continue to run as before. If you do not want the previous state to
+	  be reloaded, then use the 'noresume' kernel command line argument.
+	  Note, however, that fsck will be run on your filesystems and you will
+	  need to run mkswap against the swap partition used for the suspend.
+
+	  It also works with swap files to a limited extent (for details see
+	  <file:Documentation/power/swsusp-and-swap-files.rst>).
+
+	  Right now you may boot without resuming and resume later but in the
+	  meantime you cannot use the swap partition(s)/file(s) involved in
+	  suspending.  Also in this case you must not use the filesystems
+	  that were mounted before the suspend.  In particular, you MUST NOT
+	  MOUNT any journaled filesystems mounted before the suspend or they
+	  will get corrupted in a nasty way.
+
+	  For more information take a look at <file:Documentation/power/swsusp.rst>.
+
+config HIBERNATION_SNAPSHOT_DEV
+	bool "Userspace snapshot device"
+	depends on HIBERNATION
+	default y
+	help
+	  Device used by the uswsusp tools.
+
+	  Say N if no snapshotting from userspace is needed, this also
+	  reduces the attack surface of the kernel.
+
+	  If in doubt, say Y.
+
+config PM_STD_PARTITION
+	string "Default resume partition"
+	depends on HIBERNATION
+	default ""
+	help
+	  The default resume partition is the partition that the suspend-
+	  to-disk implementation will look for a suspended disk image.
+
+	  The partition specified here will be different for almost every user.
+	  It should be a valid swap partition (at least for now) that is turned
+	  on before suspending.
+
+	  The partition specified can be overridden by specifying:
+
+		resume=/dev/<other device>
+
+	  which will set the resume partition to the device specified.
+
+	  Note there is currently not a way to specify which device to save the
+	  suspended image to. It will simply pick the first available swap
+	  device.
+
+config PM_SLEEP
+	def_bool y
+	depends on SUSPEND || HIBERNATE_CALLBACKS
+	select PM
+
+config PM_SLEEP_SMP
+	def_bool y
+	depends on SMP
+	depends on ARCH_SUSPEND_POSSIBLE || ARCH_HIBERNATION_POSSIBLE
+	depends on PM_SLEEP
+	select HOTPLUG_CPU
+
+config PM_SLEEP_SMP_NONZERO_CPU
+	def_bool y
+	depends on PM_SLEEP_SMP
+	depends on ARCH_SUSPEND_NONZERO_CPU
+	help
+	If an arch can suspend (for suspend, hibernate, kexec, etc) on a
+	non-zero numbered CPU, it may define ARCH_SUSPEND_NONZERO_CPU. This
+	will allow nohz_full mask to include CPU0.
+
+config PM_AUTOSLEEP
+	bool "Opportunistic sleep"
+	depends on PM_SLEEP
+	help
+	Allow the kernel to trigger a system transition into a global sleep
+	state automatically whenever there are no active wakeup sources.
+
+config PM_USERSPACE_AUTOSLEEP
+	bool "Userspace opportunistic sleep"
+	depends on PM_SLEEP
+	help
+	Notify kernel of aggressive userspace autosleep power management policy.
+
+	This option changes the behavior of various sleep-sensitive code to deal
+	with frequent userspace-initiated transitions into a global sleep state.
+
+	Saying Y here, disables code paths that most users really should keep
+	enabled. In particular, only enable this if it is very common to be
+	asleep/awake for very short periods of time (<= 2 seconds).
+
+	Only platforms, such as Android, that implement opportunistic sleep from
+	a userspace power manager service should enable this option; and not
+	other machines. Therefore, you should say N here, unless you are
+	extremely certain that this is what you want. The option otherwise has
+	bad, undesirable effects, and should not be enabled just for fun.
+
+
+config PM_WAKELOCKS
+	bool "User space wakeup sources interface"
+	depends on PM_SLEEP
+	help
+	Allow user space to create, activate and deactivate wakeup source
+	objects with the help of a sysfs-based interface.
+
+config PM_WAKELOCKS_LIMIT
+	int "Maximum number of user space wakeup sources (0 = no limit)"
+	range 0 100000
+	default 100
+	depends on PM_WAKELOCKS
+
+config PM_WAKELOCKS_GC
+	bool "Garbage collector for user space wakeup sources"
+	depends on PM_WAKELOCKS
+	default y
+
+config PM
+	bool "Device power management core functionality"
+	help
+	  Enable functionality allowing I/O devices to be put into energy-saving
+	  (low power) states, for example after a specified period of inactivity
+	  (autosuspended), and woken up in response to a hardware-generated
+	  wake-up event or a driver's request.
+
+	  Hardware support is generally required for this functionality to work
+	  and the bus type drivers of the buses the devices are on are
+	  responsible for the actual handling of device suspend requests and
+	  wake-up events.
+
+config PM_DEBUG
+	bool "Power Management Debug Support"
+	depends on PM
+	help
+	This option enables various debugging support in the Power Management
+	code. This is helpful when debugging and reporting PM bugs, like
+	suspend support.
+
+config PM_ADVANCED_DEBUG
+	bool "Extra PM attributes in sysfs for low-level debugging/testing"
+	depends on PM_DEBUG
+	help
+	Add extra sysfs attributes allowing one to access some Power Management
+	fields of device objects from user space.  If you are not a kernel
+	developer interested in debugging/testing Power Management, say "no".
+
+config PM_TEST_SUSPEND
+	bool "Test suspend/resume and wakealarm during bootup"
+	depends on SUSPEND && PM_DEBUG && RTC_CLASS=y
+	help
+	This option will let you suspend your machine during bootup, and
+	make it wake up a few seconds later using an RTC wakeup alarm.
+	Enable this with a kernel parameter like "test_suspend=mem".
+
+	You probably want to have your system's RTC driver statically
+	linked, ensuring that it's available when this test runs.
+
+config PM_SLEEP_DEBUG
+	def_bool y
+	depends on PM_DEBUG && PM_SLEEP
+
+config DPM_WATCHDOG
+	bool "Device suspend/resume watchdog"
+	depends on PM_DEBUG && PSTORE && EXPERT
+	help
+	  Sets up a watchdog timer to capture drivers that are
+	  locked up attempting to suspend/resume a device.
+	  A detected lockup causes system panic with message
+	  captured in pstore device for inspection in subsequent
+	  boot session.
+
+config DPM_WATCHDOG_TIMEOUT
+	int "Watchdog timeout in seconds"
+	range 1 120
+	default 120
+	depends on DPM_WATCHDOG
+
+config PM_TRACE
+	bool
+	help
+	  This enables code to save the last PM event point across
+	  reboot. The architecture needs to support this, x86 for
+	  example does by saving things in the RTC, see below.
+
+	  The architecture specific code must provide the extern
+	  functions from <linux/resume-trace.h> as well as the
+	  <asm/resume-trace.h> header with a TRACE_RESUME() macro.
+
+	  The way the information is presented is architecture-
+	  dependent, x86 will print the information during a
+	  late_initcall.
+
+config PM_TRACE_RTC
+	bool "Suspend/resume event tracing"
+	depends on PM_SLEEP_DEBUG
+	depends on X86
+	select PM_TRACE
+	help
+	This enables some cheesy code to save the last PM event point in the
+	RTC across reboots, so that you can debug a machine that just hangs
+	during suspend (or more commonly, during resume).
+
+	To use this debugging feature you should attempt to suspend the
+	machine, reboot it and then run
+
+		dmesg -s 1000000 | grep 'hash matches'
+
+	CAUTION: this option will cause your machine's real-time clock to be
+	set to an invalid time after a resume.
+
+config APM_EMULATION
+	tristate "Advanced Power Management Emulation"
+	depends on SYS_SUPPORTS_APM_EMULATION
+	help
+	  APM is a BIOS specification for saving power using several different
+	  techniques. This is mostly useful for battery powered laptops with
+	  APM compliant BIOSes. If you say Y here, the system time will be
+	  reset after a RESUME operation, the /proc/apm device will provide
+	  battery status information, and user-space programs will receive
+	  notification of APM "events" (e.g. battery status change).
+
+	  In order to use APM, you will need supporting software. For location
+	  and more information, read <file:Documentation/power/apm-acpi.rst>
+	  and the Battery Powered Linux mini-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  This driver does not spin down disk drives (see the hdparm(8)
+	  manpage ("man 8 hdparm") for that), and it doesn't turn off
+	  VESA-compliant "green" monitors.
+
+	  Generally, if you don't have a battery in your machine, there isn't
+	  much point in using this driver and you should say N. If you get
+	  random kernel OOPSes or reboots that don't seem to be related to
+	  anything, try disabling/enabling this option (or disabling/enabling
+	  APM in your BIOS).
+
+config PM_CLK
+	def_bool y
+	depends on PM && HAVE_CLK
+
+config PM_GENERIC_DOMAINS
+	bool
+	depends on PM
+
+config WQ_POWER_EFFICIENT_DEFAULT
+	bool "Enable workqueue power-efficient mode by default"
+	depends on PM
+	help
+	  Per-cpu workqueues are generally preferred because they show
+	  better performance thanks to cache locality; unfortunately,
+	  per-cpu workqueues tend to be more power hungry than unbound
+	  workqueues.
+
+	  Enabling workqueue.power_efficient kernel parameter makes the
+	  per-cpu workqueues which were observed to contribute
+	  significantly to power consumption unbound, leading to measurably
+	  lower power usage at the cost of small performance overhead.
+
+	  This config option determines whether workqueue.power_efficient
+	  is enabled by default.
+
+	  If in doubt, say N.
+
+config PM_GENERIC_DOMAINS_SLEEP
+	def_bool y
+	depends on PM_SLEEP && PM_GENERIC_DOMAINS
+
+config PM_GENERIC_DOMAINS_OF
+	def_bool y
+	depends on PM_GENERIC_DOMAINS && OF
+
+config CPU_PM
+	bool
+
+config ENERGY_MODEL
+	bool "Energy Model for devices with DVFS (CPUs, GPUs, etc)"
+	depends on SMP
+	depends on CPU_FREQ
+	help
+	  Several subsystems (thermal and/or the task scheduler for example)
+	  can leverage information about the energy consumed by devices to
+	  make smarter decisions. This config option enables the framework
+	  from which subsystems can access the energy models.
+
+	  The exact usage of the energy model is subsystem-dependent.
+
+	  If in doubt, say N.