Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 666 insertions, 0 deletions

diff --git a/kernel/sched/membarrier.c b/kernel/sched/membarrier.c
new file mode 100644
index 000000000..2ad881d07
--- /dev/null
+++ b/kernel/sched/membarrier.c
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2010-2017 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+ *
+ * membarrier system call
+ */
+
+/*
+ * For documentation purposes, here are some membarrier ordering
+ * scenarios to keep in mind:
+ *
+ * A) Userspace thread execution after IPI vs membarrier's memory
+ *    barrier before sending the IPI
+ *
+ * Userspace variables:
+ *
+ * int x = 0, y = 0;
+ *
+ * The memory barrier at the start of membarrier() on CPU0 is necessary in
+ * order to enforce the guarantee that any writes occurring on CPU0 before
+ * the membarrier() is executed will be visible to any code executing on
+ * CPU1 after the IPI-induced memory barrier:
+ *
+ *         CPU0                              CPU1
+ *
+ *         x = 1
+ *         membarrier():
+ *           a: smp_mb()
+ *           b: send IPI                       IPI-induced mb
+ *           c: smp_mb()
+ *         r2 = y
+ *                                           y = 1
+ *                                           barrier()
+ *                                           r1 = x
+ *
+ *                     BUG_ON(r1 == 0 && r2 == 0)
+ *
+ * The write to y and load from x by CPU1 are unordered by the hardware,
+ * so it's possible to have "r1 = x" reordered before "y = 1" at any
+ * point after (b).  If the memory barrier at (a) is omitted, then "x = 1"
+ * can be reordered after (a) (although not after (c)), so we get r1 == 0
+ * and r2 == 0.  This violates the guarantee that membarrier() is
+ * supposed by provide.
+ *
+ * The timing of the memory barrier at (a) has to ensure that it executes
+ * before the IPI-induced memory barrier on CPU1.
+ *
+ * B) Userspace thread execution before IPI vs membarrier's memory
+ *    barrier after completing the IPI
+ *
+ * Userspace variables:
+ *
+ * int x = 0, y = 0;
+ *
+ * The memory barrier at the end of membarrier() on CPU0 is necessary in
+ * order to enforce the guarantee that any writes occurring on CPU1 before
+ * the membarrier() is executed will be visible to any code executing on
+ * CPU0 after the membarrier():
+ *
+ *         CPU0                              CPU1
+ *
+ *                                           x = 1
+ *                                           barrier()
+ *                                           y = 1
+ *         r2 = y
+ *         membarrier():
+ *           a: smp_mb()
+ *           b: send IPI                       IPI-induced mb
+ *           c: smp_mb()
+ *         r1 = x
+ *         BUG_ON(r1 == 0 && r2 == 1)
+ *
+ * The writes to x and y are unordered by the hardware, so it's possible to
+ * have "r2 = 1" even though the write to x doesn't execute until (b).  If
+ * the memory barrier at (c) is omitted then "r1 = x" can be reordered
+ * before (b) (although not before (a)), so we get "r1 = 0".  This violates
+ * the guarantee that membarrier() is supposed to provide.
+ *
+ * The timing of the memory barrier at (c) has to ensure that it executes
+ * after the IPI-induced memory barrier on CPU1.
+ *
+ * C) Scheduling userspace thread -> kthread -> userspace thread vs membarrier
+ *
+ *           CPU0                            CPU1
+ *
+ *           membarrier():
+ *           a: smp_mb()
+ *                                           d: switch to kthread (includes mb)
+ *           b: read rq->curr->mm == NULL
+ *                                           e: switch to user (includes mb)
+ *           c: smp_mb()
+ *
+ * Using the scenario from (A), we can show that (a) needs to be paired
+ * with (e). Using the scenario from (B), we can show that (c) needs to
+ * be paired with (d).
+ *
+ * D) exit_mm vs membarrier
+ *
+ * Two thread groups are created, A and B.  Thread group B is created by
+ * issuing clone from group A with flag CLONE_VM set, but not CLONE_THREAD.
+ * Let's assume we have a single thread within each thread group (Thread A
+ * and Thread B).  Thread A runs on CPU0, Thread B runs on CPU1.
+ *
+ *           CPU0                            CPU1
+ *
+ *           membarrier():
+ *             a: smp_mb()
+ *                                           exit_mm():
+ *                                             d: smp_mb()
+ *                                             e: current->mm = NULL
+ *             b: read rq->curr->mm == NULL
+ *             c: smp_mb()
+ *
+ * Using scenario (B), we can show that (c) needs to be paired with (d).
+ *
+ * E) kthread_{use,unuse}_mm vs membarrier
+ *
+ *           CPU0                            CPU1
+ *
+ *           membarrier():
+ *           a: smp_mb()
+ *                                           kthread_unuse_mm()
+ *                                             d: smp_mb()
+ *                                             e: current->mm = NULL
+ *           b: read rq->curr->mm == NULL
+ *                                           kthread_use_mm()
+ *                                             f: current->mm = mm
+ *                                             g: smp_mb()
+ *           c: smp_mb()
+ *
+ * Using the scenario from (A), we can show that (a) needs to be paired
+ * with (g). Using the scenario from (B), we can show that (c) needs to
+ * be paired with (d).
+ */
+
+/*
+ * Bitmask made from a "or" of all commands within enum membarrier_cmd,
+ * except MEMBARRIER_CMD_QUERY.
+ */
+#ifdef CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE
+#define MEMBARRIER_PRIVATE_EXPEDITED_SYNC_CORE_BITMASK			\
+	(MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE			\
+	| MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE)
+#else
+#define MEMBARRIER_PRIVATE_EXPEDITED_SYNC_CORE_BITMASK	0
+#endif
+
+#ifdef CONFIG_RSEQ
+#define MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK		\
+	(MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ			\
+	| MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ)
+#else
+#define MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK	0
+#endif
+
+#define MEMBARRIER_CMD_BITMASK						\
+	(MEMBARRIER_CMD_GLOBAL | MEMBARRIER_CMD_GLOBAL_EXPEDITED	\
+	| MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED			\
+	| MEMBARRIER_CMD_PRIVATE_EXPEDITED				\
+	| MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED			\
+	| MEMBARRIER_PRIVATE_EXPEDITED_SYNC_CORE_BITMASK		\
+	| MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK			\
+	| MEMBARRIER_CMD_GET_REGISTRATIONS)
+
+static void ipi_mb(void *info)
+{
+	smp_mb();	/* IPIs should be serializing but paranoid. */
+}
+
+static void ipi_sync_core(void *info)
+{
+	/*
+	 * The smp_mb() in membarrier after all the IPIs is supposed to
+	 * ensure that memory on remote CPUs that occur before the IPI
+	 * become visible to membarrier()'s caller -- see scenario B in
+	 * the big comment at the top of this file.
+	 *
+	 * A sync_core() would provide this guarantee, but
+	 * sync_core_before_usermode() might end up being deferred until
+	 * after membarrier()'s smp_mb().
+	 */
+	smp_mb();	/* IPIs should be serializing but paranoid. */
+
+	sync_core_before_usermode();
+}
+
+static void ipi_rseq(void *info)
+{
+	/*
+	 * Ensure that all stores done by the calling thread are visible
+	 * to the current task before the current task resumes.  We could
+	 * probably optimize this away on most architectures, but by the
+	 * time we've already sent an IPI, the cost of the extra smp_mb()
+	 * is negligible.
+	 */
+	smp_mb();
+	rseq_preempt(current);
+}
+
+static void ipi_sync_rq_state(void *info)
+{
+	struct mm_struct *mm = (struct mm_struct *) info;
+
+	if (current->mm != mm)
+		return;
+	this_cpu_write(runqueues.membarrier_state,
+		       atomic_read(&mm->membarrier_state));
+	/*
+	 * Issue a memory barrier after setting
+	 * MEMBARRIER_STATE_GLOBAL_EXPEDITED in the current runqueue to
+	 * guarantee that no memory access following registration is reordered
+	 * before registration.
+	 */
+	smp_mb();
+}
+
+void membarrier_exec_mmap(struct mm_struct *mm)
+{
+	/*
+	 * Issue a memory barrier before clearing membarrier_state to
+	 * guarantee that no memory access prior to exec is reordered after
+	 * clearing this state.
+	 */
+	smp_mb();
+	atomic_set(&mm->membarrier_state, 0);
+	/*
+	 * Keep the runqueue membarrier_state in sync with this mm
+	 * membarrier_state.
+	 */
+	this_cpu_write(runqueues.membarrier_state, 0);
+}
+
+void membarrier_update_current_mm(struct mm_struct *next_mm)
+{
+	struct rq *rq = this_rq();
+	int membarrier_state = 0;
+
+	if (next_mm)
+		membarrier_state = atomic_read(&next_mm->membarrier_state);
+	if (READ_ONCE(rq->membarrier_state) == membarrier_state)
+		return;
+	WRITE_ONCE(rq->membarrier_state, membarrier_state);
+}
+
+static int membarrier_global_expedited(void)
+{
+	int cpu;
+	cpumask_var_t tmpmask;
+
+	if (num_online_cpus() == 1)
+		return 0;
+
+	/*
+	 * Matches memory barriers around rq->curr modification in
+	 * scheduler.
+	 */
+	smp_mb();	/* system call entry is not a mb. */
+
+	if (!zalloc_cpumask_var(&tmpmask, GFP_KERNEL))
+		return -ENOMEM;
+
+	cpus_read_lock();
+	rcu_read_lock();
+	for_each_online_cpu(cpu) {
+		struct task_struct *p;
+
+		/*
+		 * Skipping the current CPU is OK even through we can be
+		 * migrated at any point. The current CPU, at the point
+		 * where we read raw_smp_processor_id(), is ensured to
+		 * be in program order with respect to the caller
+		 * thread. Therefore, we can skip this CPU from the
+		 * iteration.
+		 */
+		if (cpu == raw_smp_processor_id())
+			continue;
+
+		if (!(READ_ONCE(cpu_rq(cpu)->membarrier_state) &
+		    MEMBARRIER_STATE_GLOBAL_EXPEDITED))
+			continue;
+
+		/*
+		 * Skip the CPU if it runs a kernel thread which is not using
+		 * a task mm.
+		 */
+		p = rcu_dereference(cpu_rq(cpu)->curr);
+		if (!p->mm)
+			continue;
+
+		__cpumask_set_cpu(cpu, tmpmask);
+	}
+	rcu_read_unlock();
+
+	preempt_disable();
+	smp_call_function_many(tmpmask, ipi_mb, NULL, 1);
+	preempt_enable();
+
+	free_cpumask_var(tmpmask);
+	cpus_read_unlock();
+
+	/*
+	 * Memory barrier on the caller thread _after_ we finished
+	 * waiting for the last IPI. Matches memory barriers around
+	 * rq->curr modification in scheduler.
+	 */
+	smp_mb();	/* exit from system call is not a mb */
+	return 0;
+}
+
+static int membarrier_private_expedited(int flags, int cpu_id)
+{
+	cpumask_var_t tmpmask;
+	struct mm_struct *mm = current->mm;
+	smp_call_func_t ipi_func = ipi_mb;
+
+	if (flags == MEMBARRIER_FLAG_SYNC_CORE) {
+		if (!IS_ENABLED(CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE))
+			return -EINVAL;
+		if (!(atomic_read(&mm->membarrier_state) &
+		      MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE_READY))
+			return -EPERM;
+		ipi_func = ipi_sync_core;
+	} else if (flags == MEMBARRIER_FLAG_RSEQ) {
+		if (!IS_ENABLED(CONFIG_RSEQ))
+			return -EINVAL;
+		if (!(atomic_read(&mm->membarrier_state) &
+		      MEMBARRIER_STATE_PRIVATE_EXPEDITED_RSEQ_READY))
+			return -EPERM;
+		ipi_func = ipi_rseq;
+	} else {
+		WARN_ON_ONCE(flags);
+		if (!(atomic_read(&mm->membarrier_state) &
+		      MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY))
+			return -EPERM;
+	}
+
+	if (flags != MEMBARRIER_FLAG_SYNC_CORE &&
+	    (atomic_read(&mm->mm_users) == 1 || num_online_cpus() == 1))
+		return 0;
+
+	/*
+	 * Matches memory barriers around rq->curr modification in
+	 * scheduler.
+	 */
+	smp_mb();	/* system call entry is not a mb. */
+
+	if (cpu_id < 0 && !zalloc_cpumask_var(&tmpmask, GFP_KERNEL))
+		return -ENOMEM;
+
+	cpus_read_lock();
+
+	if (cpu_id >= 0) {
+		struct task_struct *p;
+
+		if (cpu_id >= nr_cpu_ids || !cpu_online(cpu_id))
+			goto out;
+		rcu_read_lock();
+		p = rcu_dereference(cpu_rq(cpu_id)->curr);
+		if (!p || p->mm != mm) {
+			rcu_read_unlock();
+			goto out;
+		}
+		rcu_read_unlock();
+	} else {
+		int cpu;
+
+		rcu_read_lock();
+		for_each_online_cpu(cpu) {
+			struct task_struct *p;
+
+			p = rcu_dereference(cpu_rq(cpu)->curr);
+			if (p && p->mm == mm)
+				__cpumask_set_cpu(cpu, tmpmask);
+		}
+		rcu_read_unlock();
+	}
+
+	if (cpu_id >= 0) {
+		/*
+		 * smp_call_function_single() will call ipi_func() if cpu_id
+		 * is the calling CPU.
+		 */
+		smp_call_function_single(cpu_id, ipi_func, NULL, 1);
+	} else {
+		/*
+		 * For regular membarrier, we can save a few cycles by
+		 * skipping the current cpu -- we're about to do smp_mb()
+		 * below, and if we migrate to a different cpu, this cpu
+		 * and the new cpu will execute a full barrier in the
+		 * scheduler.
+		 *
+		 * For SYNC_CORE, we do need a barrier on the current cpu --
+		 * otherwise, if we are migrated and replaced by a different
+		 * task in the same mm just before, during, or after
+		 * membarrier, we will end up with some thread in the mm
+		 * running without a core sync.
+		 *
+		 * For RSEQ, don't rseq_preempt() the caller.  User code
+		 * is not supposed to issue syscalls at all from inside an
+		 * rseq critical section.
+		 */
+		if (flags != MEMBARRIER_FLAG_SYNC_CORE) {
+			preempt_disable();
+			smp_call_function_many(tmpmask, ipi_func, NULL, true);
+			preempt_enable();
+		} else {
+			on_each_cpu_mask(tmpmask, ipi_func, NULL, true);
+		}
+	}
+
+out:
+	if (cpu_id < 0)
+		free_cpumask_var(tmpmask);
+	cpus_read_unlock();
+
+	/*
+	 * Memory barrier on the caller thread _after_ we finished
+	 * waiting for the last IPI. Matches memory barriers around
+	 * rq->curr modification in scheduler.
+	 */
+	smp_mb();	/* exit from system call is not a mb */
+
+	return 0;
+}
+
+static int sync_runqueues_membarrier_state(struct mm_struct *mm)
+{
+	int membarrier_state = atomic_read(&mm->membarrier_state);
+	cpumask_var_t tmpmask;
+	int cpu;
+
+	if (atomic_read(&mm->mm_users) == 1 || num_online_cpus() == 1) {
+		this_cpu_write(runqueues.membarrier_state, membarrier_state);
+
+		/*
+		 * For single mm user, we can simply issue a memory barrier
+		 * after setting MEMBARRIER_STATE_GLOBAL_EXPEDITED in the
+		 * mm and in the current runqueue to guarantee that no memory
+		 * access following registration is reordered before
+		 * registration.
+		 */
+		smp_mb();
+		return 0;
+	}
+
+	if (!zalloc_cpumask_var(&tmpmask, GFP_KERNEL))
+		return -ENOMEM;
+
+	/*
+	 * For mm with multiple users, we need to ensure all future
+	 * scheduler executions will observe @mm's new membarrier
+	 * state.
+	 */
+	synchronize_rcu();
+
+	/*
+	 * For each cpu runqueue, if the task's mm match @mm, ensure that all
+	 * @mm's membarrier state set bits are also set in the runqueue's
+	 * membarrier state. This ensures that a runqueue scheduling
+	 * between threads which are users of @mm has its membarrier state
+	 * updated.
+	 */
+	cpus_read_lock();
+	rcu_read_lock();
+	for_each_online_cpu(cpu) {
+		struct rq *rq = cpu_rq(cpu);
+		struct task_struct *p;
+
+		p = rcu_dereference(rq->curr);
+		if (p && p->mm == mm)
+			__cpumask_set_cpu(cpu, tmpmask);
+	}
+	rcu_read_unlock();
+
+	on_each_cpu_mask(tmpmask, ipi_sync_rq_state, mm, true);
+
+	free_cpumask_var(tmpmask);
+	cpus_read_unlock();
+
+	return 0;
+}
+
+static int membarrier_register_global_expedited(void)
+{
+	struct task_struct *p = current;
+	struct mm_struct *mm = p->mm;
+	int ret;
+
+	if (atomic_read(&mm->membarrier_state) &
+	    MEMBARRIER_STATE_GLOBAL_EXPEDITED_READY)
+		return 0;
+	atomic_or(MEMBARRIER_STATE_GLOBAL_EXPEDITED, &mm->membarrier_state);
+	ret = sync_runqueues_membarrier_state(mm);
+	if (ret)
+		return ret;
+	atomic_or(MEMBARRIER_STATE_GLOBAL_EXPEDITED_READY,
+		  &mm->membarrier_state);
+
+	return 0;
+}
+
+static int membarrier_register_private_expedited(int flags)
+{
+	struct task_struct *p = current;
+	struct mm_struct *mm = p->mm;
+	int ready_state = MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY,
+	    set_state = MEMBARRIER_STATE_PRIVATE_EXPEDITED,
+	    ret;
+
+	if (flags == MEMBARRIER_FLAG_SYNC_CORE) {
+		if (!IS_ENABLED(CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE))
+			return -EINVAL;
+		ready_state =
+			MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE_READY;
+	} else if (flags == MEMBARRIER_FLAG_RSEQ) {
+		if (!IS_ENABLED(CONFIG_RSEQ))
+			return -EINVAL;
+		ready_state =
+			MEMBARRIER_STATE_PRIVATE_EXPEDITED_RSEQ_READY;
+	} else {
+		WARN_ON_ONCE(flags);
+	}
+
+	/*
+	 * We need to consider threads belonging to different thread
+	 * groups, which use the same mm. (CLONE_VM but not
+	 * CLONE_THREAD).
+	 */
+	if ((atomic_read(&mm->membarrier_state) & ready_state) == ready_state)
+		return 0;
+	if (flags & MEMBARRIER_FLAG_SYNC_CORE)
+		set_state |= MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE;
+	if (flags & MEMBARRIER_FLAG_RSEQ)
+		set_state |= MEMBARRIER_STATE_PRIVATE_EXPEDITED_RSEQ;
+	atomic_or(set_state, &mm->membarrier_state);
+	ret = sync_runqueues_membarrier_state(mm);
+	if (ret)
+		return ret;
+	atomic_or(ready_state, &mm->membarrier_state);
+
+	return 0;
+}
+
+static int membarrier_get_registrations(void)
+{
+	struct task_struct *p = current;
+	struct mm_struct *mm = p->mm;
+	int registrations_mask = 0, membarrier_state, i;
+	static const int states[] = {
+		MEMBARRIER_STATE_GLOBAL_EXPEDITED |
+			MEMBARRIER_STATE_GLOBAL_EXPEDITED_READY,
+		MEMBARRIER_STATE_PRIVATE_EXPEDITED |
+			MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY,
+		MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE |
+			MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE_READY,
+		MEMBARRIER_STATE_PRIVATE_EXPEDITED_RSEQ |
+			MEMBARRIER_STATE_PRIVATE_EXPEDITED_RSEQ_READY
+	};
+	static const int registration_cmds[] = {
+		MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED,
+		MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED,
+		MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE,
+		MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ
+	};
+	BUILD_BUG_ON(ARRAY_SIZE(states) != ARRAY_SIZE(registration_cmds));
+
+	membarrier_state = atomic_read(&mm->membarrier_state);
+	for (i = 0; i < ARRAY_SIZE(states); ++i) {
+		if (membarrier_state & states[i]) {
+			registrations_mask |= registration_cmds[i];
+			membarrier_state &= ~states[i];
+		}
+	}
+	WARN_ON_ONCE(membarrier_state != 0);
+	return registrations_mask;
+}
+
+/**
+ * sys_membarrier - issue memory barriers on a set of threads
+ * @cmd:    Takes command values defined in enum membarrier_cmd.
+ * @flags:  Currently needs to be 0 for all commands other than
+ *          MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ: in the latter
+ *          case it can be MEMBARRIER_CMD_FLAG_CPU, indicating that @cpu_id
+ *          contains the CPU on which to interrupt (= restart)
+ *          the RSEQ critical section.
+ * @cpu_id: if @flags == MEMBARRIER_CMD_FLAG_CPU, indicates the cpu on which
+ *          RSEQ CS should be interrupted (@cmd must be
+ *          MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ).
+ *
+ * If this system call is not implemented, -ENOSYS is returned. If the
+ * command specified does not exist, not available on the running
+ * kernel, or if the command argument is invalid, this system call
+ * returns -EINVAL. For a given command, with flags argument set to 0,
+ * if this system call returns -ENOSYS or -EINVAL, it is guaranteed to
+ * always return the same value until reboot. In addition, it can return
+ * -ENOMEM if there is not enough memory available to perform the system
+ * call.
+ *
+ * All memory accesses performed in program order from each targeted thread
+ * is guaranteed to be ordered with respect to sys_membarrier(). If we use
+ * the semantic "barrier()" to represent a compiler barrier forcing memory
+ * accesses to be performed in program order across the barrier, and
+ * smp_mb() to represent explicit memory barriers forcing full memory
+ * ordering across the barrier, we have the following ordering table for
+ * each pair of barrier(), sys_membarrier() and smp_mb():
+ *
+ * The pair ordering is detailed as (O: ordered, X: not ordered):
+ *
+ *                        barrier()   smp_mb() sys_membarrier()
+ *        barrier()          X           X            O
+ *        smp_mb()           X           O            O
+ *        sys_membarrier()   O           O            O
+ */
+SYSCALL_DEFINE3(membarrier, int, cmd, unsigned int, flags, int, cpu_id)
+{
+	switch (cmd) {
+	case MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ:
+		if (unlikely(flags && flags != MEMBARRIER_CMD_FLAG_CPU))
+			return -EINVAL;
+		break;
+	default:
+		if (unlikely(flags))
+			return -EINVAL;
+	}
+
+	if (!(flags & MEMBARRIER_CMD_FLAG_CPU))
+		cpu_id = -1;
+
+	switch (cmd) {
+	case MEMBARRIER_CMD_QUERY:
+	{
+		int cmd_mask = MEMBARRIER_CMD_BITMASK;
+
+		if (tick_nohz_full_enabled())
+			cmd_mask &= ~MEMBARRIER_CMD_GLOBAL;
+		return cmd_mask;
+	}
+	case MEMBARRIER_CMD_GLOBAL:
+		/* MEMBARRIER_CMD_GLOBAL is not compatible with nohz_full. */
+		if (tick_nohz_full_enabled())
+			return -EINVAL;
+		if (num_online_cpus() > 1)
+			synchronize_rcu();
+		return 0;
+	case MEMBARRIER_CMD_GLOBAL_EXPEDITED:
+		return membarrier_global_expedited();
+	case MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED:
+		return membarrier_register_global_expedited();
+	case MEMBARRIER_CMD_PRIVATE_EXPEDITED:
+		return membarrier_private_expedited(0, cpu_id);
+	case MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED:
+		return membarrier_register_private_expedited(0);
+	case MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE:
+		return membarrier_private_expedited(MEMBARRIER_FLAG_SYNC_CORE, cpu_id);
+	case MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE:
+		return membarrier_register_private_expedited(MEMBARRIER_FLAG_SYNC_CORE);
+	case MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ:
+		return membarrier_private_expedited(MEMBARRIER_FLAG_RSEQ, cpu_id);
+	case MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ:
+		return membarrier_register_private_expedited(MEMBARRIER_FLAG_RSEQ);
+	case MEMBARRIER_CMD_GET_REGISTRATIONS:
+		return membarrier_get_registrations();
+	default:
+		return -EINVAL;
+	}
+}