Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 213 insertions, 0 deletions

diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
new file mode 100644
index 000000000..bae8f1107
--- /dev/null
+++ b/kernel/time/Kconfig
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Timer subsystem related configuration options
+#
+
+# Options selectable by arch Kconfig
+
+# Watchdog function for clocksources to detect instabilities
+config CLOCKSOURCE_WATCHDOG
+	bool
+
+# Architecture has extra clocksource data
+config ARCH_CLOCKSOURCE_DATA
+	bool
+
+# Architecture has extra clocksource init called from registration
+config ARCH_CLOCKSOURCE_INIT
+	bool
+
+# Clocksources require validation of the clocksource against the last
+# cycle update - x86/TSC misfeature
+config CLOCKSOURCE_VALIDATE_LAST_CYCLE
+	bool
+
+# Timekeeping vsyscall support
+config GENERIC_TIME_VSYSCALL
+	bool
+
+# The generic clock events infrastructure
+config GENERIC_CLOCKEVENTS
+	def_bool !LEGACY_TIMER_TICK
+
+# Architecture can handle broadcast in a driver-agnostic way
+config ARCH_HAS_TICK_BROADCAST
+	bool
+
+# Clockevents broadcasting infrastructure
+config GENERIC_CLOCKEVENTS_BROADCAST
+	bool
+	depends on GENERIC_CLOCKEVENTS
+
+# Automatically adjust the min. reprogramming time for
+# clock event device
+config GENERIC_CLOCKEVENTS_MIN_ADJUST
+	bool
+
+# Generic update of CMOS clock
+config GENERIC_CMOS_UPDATE
+	bool
+
+# Select to handle posix CPU timers from task_work
+# and not from the timer interrupt context
+config HAVE_POSIX_CPU_TIMERS_TASK_WORK
+	bool
+
+config POSIX_CPU_TIMERS_TASK_WORK
+	bool
+	default y if POSIX_TIMERS && HAVE_POSIX_CPU_TIMERS_TASK_WORK
+
+config LEGACY_TIMER_TICK
+	bool
+	help
+	  The legacy timer tick helper is used by platforms that
+	  lack support for the generic clockevent framework.
+	  New platforms should use generic clockevents instead.
+
+config TIME_KUNIT_TEST
+	tristate "KUnit test for kernel/time functions" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Enable this option to test RTC library functions.
+
+	  If unsure, say N.
+
+config CONTEXT_TRACKING
+	bool
+
+config CONTEXT_TRACKING_IDLE
+	bool
+	select CONTEXT_TRACKING
+	help
+	  Tracks idle state on behalf of RCU.
+
+if GENERIC_CLOCKEVENTS
+menu "Timers subsystem"
+
+# Core internal switch. Selected by NO_HZ_COMMON / HIGH_RES_TIMERS. This is
+# only related to the tick functionality. Oneshot clockevent devices
+# are supported independent of this.
+config TICK_ONESHOT
+	bool
+
+config NO_HZ_COMMON
+	bool
+	select TICK_ONESHOT
+
+choice
+	prompt "Timer tick handling"
+	default NO_HZ_IDLE if NO_HZ
+
+config HZ_PERIODIC
+	bool "Periodic timer ticks (constant rate, no dynticks)"
+	help
+	  This option keeps the tick running periodically at a constant
+	  rate, even when the CPU doesn't need it.
+
+config NO_HZ_IDLE
+	bool "Idle dynticks system (tickless idle)"
+	select NO_HZ_COMMON
+	help
+	  This option enables a tickless idle system: timer interrupts
+	  will only trigger on an as-needed basis when the system is idle.
+	  This is usually interesting for energy saving.
+
+	  Most of the time you want to say Y here.
+
+config NO_HZ_FULL
+	bool "Full dynticks system (tickless)"
+	# NO_HZ_COMMON dependency
+	# We need at least one periodic CPU for timekeeping
+	depends on SMP
+	depends on HAVE_CONTEXT_TRACKING_USER
+	# VIRT_CPU_ACCOUNTING_GEN dependency
+	depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
+	select NO_HZ_COMMON
+	select RCU_NOCB_CPU
+	select VIRT_CPU_ACCOUNTING_GEN
+	select IRQ_WORK
+	select CPU_ISOLATION
+	help
+	 Adaptively try to shutdown the tick whenever possible, even when
+	 the CPU is running tasks. Typically this requires running a single
+	 task on the CPU. Chances for running tickless are maximized when
+	 the task mostly runs in userspace and has few kernel activity.
+
+	 You need to fill up the nohz_full boot parameter with the
+	 desired range of dynticks CPUs to use it. This is implemented at
+	 the expense of some overhead in user <-> kernel transitions:
+	 syscalls, exceptions and interrupts.
+
+	 By default, without passing the nohz_full parameter, this behaves just
+	 like NO_HZ_IDLE.
+
+	 If you're a distro say Y.
+
+endchoice
+
+config CONTEXT_TRACKING_USER
+	bool
+	depends on HAVE_CONTEXT_TRACKING_USER
+	select CONTEXT_TRACKING
+	help
+	  Track transitions between kernel and user on behalf of RCU and
+	  tickless cputime accounting. The former case relies on context
+	  tracking to enter/exit RCU extended quiescent states.
+
+config CONTEXT_TRACKING_USER_FORCE
+	bool "Force user context tracking"
+	depends on CONTEXT_TRACKING_USER
+	default y if !NO_HZ_FULL
+	help
+	  The major pre-requirement for full dynticks to work is to
+	  support the user context tracking subsystem. But there are also
+	  other dependencies to provide in order to make the full
+	  dynticks working.
+
+	  This option stands for testing when an arch implements the
+	  user context tracking backend but doesn't yet fulfill all the
+	  requirements to make the full dynticks feature working.
+	  Without the full dynticks, there is no way to test the support
+	  for user context tracking and the subsystems that rely on it: RCU
+	  userspace extended quiescent state and tickless cputime
+	  accounting. This option copes with the absence of the full
+	  dynticks subsystem by forcing the user context tracking on all
+	  CPUs in the system.
+
+	  Say Y only if you're working on the development of an
+	  architecture backend for the user context tracking.
+
+	  Say N otherwise, this option brings an overhead that you
+	  don't want in production.
+
+config NO_HZ
+	bool "Old Idle dynticks config"
+	help
+	  This is the old config entry that enables dynticks idle.
+	  We keep it around for a little while to enforce backward
+	  compatibility with older config files.
+
+config HIGH_RES_TIMERS
+	bool "High Resolution Timer Support"
+	select TICK_ONESHOT
+	help
+	  This option enables high resolution timer support. If your
+	  hardware is not capable then this option only increases
+	  the size of the kernel image.
+
+config CLOCKSOURCE_WATCHDOG_MAX_SKEW_US
+	int "Clocksource watchdog maximum allowable skew (in μs)"
+	depends on CLOCKSOURCE_WATCHDOG
+	range 50 1000
+	default 125
+	help
+	  Specify the maximum amount of allowable watchdog skew in
+	  microseconds before reporting the clocksource to be unstable.
+	  The default is based on a half-second clocksource watchdog
+	  interval and NTP's maximum frequency drift of 500 parts
+	  per million.	If the clocksource is good enough for NTP,
+	  it is good enough for the clocksource watchdog!
+
+endmenu
+endif