Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 201 insertions, 0 deletions

diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan
new file mode 100644
index 000000000..be6ee6020
--- /dev/null
+++ b/lib/Kconfig.kasan
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# This config refers to the generic KASAN mode.
+config HAVE_ARCH_KASAN
+	bool
+
+config HAVE_ARCH_KASAN_SW_TAGS
+	bool
+
+config HAVE_ARCH_KASAN_HW_TAGS
+	bool
+
+config HAVE_ARCH_KASAN_VMALLOC
+	bool
+
+config ARCH_DISABLE_KASAN_INLINE
+	bool
+	help
+	  Disables both inline and stack instrumentation. Selected by
+	  architectures that do not support these instrumentation types.
+
+config CC_HAS_KASAN_GENERIC
+	def_bool $(cc-option, -fsanitize=kernel-address)
+
+config CC_HAS_KASAN_SW_TAGS
+	def_bool $(cc-option, -fsanitize=kernel-hwaddress)
+
+# This option is only required for software KASAN modes.
+# Old GCC versions do not have proper support for no_sanitize_address.
+# See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89124 for details.
+config CC_HAS_WORKING_NOSANITIZE_ADDRESS
+	def_bool !CC_IS_GCC || GCC_VERSION >= 80300
+
+menuconfig KASAN
+	bool "KASAN: dynamic memory safety error detector"
+	depends on (((HAVE_ARCH_KASAN && CC_HAS_KASAN_GENERIC) || \
+		     (HAVE_ARCH_KASAN_SW_TAGS && CC_HAS_KASAN_SW_TAGS)) && \
+		    CC_HAS_WORKING_NOSANITIZE_ADDRESS) || \
+		   HAVE_ARCH_KASAN_HW_TAGS
+	depends on (SLUB && SYSFS && !SLUB_TINY) || (SLAB && !DEBUG_SLAB)
+	select STACKDEPOT_ALWAYS_INIT
+	help
+	  Enables KASAN (Kernel Address Sanitizer) - a dynamic memory safety
+	  error detector designed to find out-of-bounds and use-after-free bugs.
+
+	  See Documentation/dev-tools/kasan.rst for details.
+
+	  For better error reports, also enable CONFIG_STACKTRACE.
+
+if KASAN
+
+choice
+	prompt "KASAN mode"
+	default KASAN_GENERIC
+	help
+	  KASAN has three modes:
+
+	  1. Generic KASAN (supported by many architectures, enabled with
+	     CONFIG_KASAN_GENERIC, similar to userspace ASan),
+	  2. Software Tag-Based KASAN (arm64 only, based on software memory
+	     tagging, enabled with CONFIG_KASAN_SW_TAGS, similar to userspace
+	     HWASan), and
+	  3. Hardware Tag-Based KASAN (arm64 only, based on hardware memory
+	     tagging, enabled with CONFIG_KASAN_HW_TAGS).
+
+	  See Documentation/dev-tools/kasan.rst for details about each mode.
+
+config KASAN_GENERIC
+	bool "Generic KASAN"
+	depends on HAVE_ARCH_KASAN && CC_HAS_KASAN_GENERIC
+	depends on CC_HAS_WORKING_NOSANITIZE_ADDRESS
+	select SLUB_DEBUG if SLUB
+	select CONSTRUCTORS
+	help
+	  Enables Generic KASAN.
+
+	  Requires GCC 8.3.0+ or Clang.
+
+	  Consumes about 1/8th of available memory at kernel start and adds an
+	  overhead of ~50% for dynamic allocations.
+	  The performance slowdown is ~x3.
+
+	  (Incompatible with CONFIG_DEBUG_SLAB: the kernel does not boot.)
+
+config KASAN_SW_TAGS
+	bool "Software Tag-Based KASAN"
+	depends on HAVE_ARCH_KASAN_SW_TAGS && CC_HAS_KASAN_SW_TAGS
+	depends on CC_HAS_WORKING_NOSANITIZE_ADDRESS
+	select SLUB_DEBUG if SLUB
+	select CONSTRUCTORS
+	help
+	  Enables Software Tag-Based KASAN.
+
+	  Requires GCC 11+ or Clang.
+
+	  Supported only on arm64 CPUs and relies on Top Byte Ignore.
+
+	  Consumes about 1/16th of available memory at kernel start and
+	  add an overhead of ~20% for dynamic allocations.
+
+	  May potentially introduce problems related to pointer casting and
+	  comparison, as it embeds a tag into the top byte of each pointer.
+
+	  (Incompatible with CONFIG_DEBUG_SLAB: the kernel does not boot.)
+
+config KASAN_HW_TAGS
+	bool "Hardware Tag-Based KASAN"
+	depends on HAVE_ARCH_KASAN_HW_TAGS
+	depends on SLUB
+	help
+	  Enables Hardware Tag-Based KASAN.
+
+	  Requires GCC 10+ or Clang 12+.
+
+	  Supported only on arm64 CPUs starting from ARMv8.5 and relies on
+	  Memory Tagging Extension and Top Byte Ignore.
+
+	  Consumes about 1/32nd of available memory.
+
+	  May potentially introduce problems related to pointer casting and
+	  comparison, as it embeds a tag into the top byte of each pointer.
+
+endchoice
+
+choice
+	prompt "Instrumentation type"
+	depends on KASAN_GENERIC || KASAN_SW_TAGS
+	default KASAN_OUTLINE
+
+config KASAN_OUTLINE
+	bool "Outline instrumentation"
+	help
+	  Makes the compiler insert function calls that check whether the memory
+	  is accessible before each memory access. Slower than KASAN_INLINE, but
+	  does not bloat the size of the kernel's .text section so much.
+
+config KASAN_INLINE
+	bool "Inline instrumentation"
+	depends on !ARCH_DISABLE_KASAN_INLINE
+	help
+	  Makes the compiler directly insert memory accessibility checks before
+	  each memory access. Faster than KASAN_OUTLINE (gives ~x2 boost for
+	  some workloads), but makes the kernel's .text size much bigger.
+
+endchoice
+
+config KASAN_STACK
+	bool "Stack instrumentation (unsafe)" if CC_IS_CLANG && !COMPILE_TEST
+	depends on KASAN_GENERIC || KASAN_SW_TAGS
+	depends on !ARCH_DISABLE_KASAN_INLINE
+	default y if CC_IS_GCC
+	help
+	  Disables stack instrumentation and thus KASAN's ability to detect
+	  out-of-bounds bugs in stack variables.
+
+	  With Clang, stack instrumentation has a problem that causes excessive
+	  stack usage, see https://bugs.llvm.org/show_bug.cgi?id=38809. Thus,
+	  with Clang, this option is deemed unsafe.
+
+	  This option is always disabled when compile-testing with Clang to
+	  avoid cluttering the log with stack overflow warnings.
+
+	  With GCC, enabling stack instrumentation is assumed to be safe.
+
+	  If the architecture disables inline instrumentation via
+	  ARCH_DISABLE_KASAN_INLINE, stack instrumentation gets disabled
+	  as well, as it adds inline-style instrumentation that is run
+	  unconditionally.
+
+config KASAN_VMALLOC
+	bool "Check accesses to vmalloc allocations"
+	depends on HAVE_ARCH_KASAN_VMALLOC
+	help
+	  Makes KASAN check the validity of accesses to vmalloc allocations.
+
+	  With software KASAN modes, all types vmalloc allocations are
+	  checked. Enabling this option leads to higher memory usage.
+
+	  With Hardware Tag-Based KASAN, only non-executable VM_ALLOC mappings
+	  are checked. There is no additional memory usage.
+
+config KASAN_KUNIT_TEST
+	tristate "KUnit-compatible tests of KASAN bug detection capabilities" if !KUNIT_ALL_TESTS
+	depends on KASAN && KUNIT && TRACEPOINTS
+	default KUNIT_ALL_TESTS
+	help
+	  A KUnit-based KASAN test suite. Triggers different kinds of
+	  out-of-bounds and use-after-free accesses. Useful for testing whether
+	  KASAN can detect certain bug types.
+
+	  For more information on KUnit and unit tests in general, please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config KASAN_MODULE_TEST
+	tristate "KUnit-incompatible tests of KASAN bug detection capabilities"
+	depends on m && KASAN && !KASAN_HW_TAGS
+	help
+	  A part of the KASAN test suite that is not integrated with KUnit.
+	  Incompatible with Hardware Tag-Based KASAN.
+
+endif # KASAN