Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 165 insertions, 0 deletions

diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
new file mode 100644
index 000000000..3b9a44008
--- /dev/null
+++ b/lib/Kconfig.kgdb
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config HAVE_ARCH_KGDB
+	bool
+
+# set if architecture has the its kgdb_arch_handle_qxfer_pkt
+# function to enable gdb stub to address XML packet sent from GDB.
+config HAVE_ARCH_KGDB_QXFER_PKT
+	bool
+
+menuconfig KGDB
+	bool "KGDB: kernel debugger"
+	depends on HAVE_ARCH_KGDB
+	depends on DEBUG_KERNEL
+	help
+	  If you say Y here, it will be possible to remotely debug the
+	  kernel using gdb.  It is recommended but not required, that
+	  you also turn on the kernel config option
+	  CONFIG_FRAME_POINTER to aid in producing more reliable stack
+	  backtraces in the external debugger.  Documentation of
+	  kernel debugger is available at http://kgdb.sourceforge.net
+	  as well as in Documentation/dev-tools/kgdb.rst.  If
+	  unsure, say N.
+
+if KGDB
+
+config KGDB_HONOUR_BLOCKLIST
+	bool "KGDB: use kprobe blocklist to prohibit unsafe breakpoints"
+	depends on HAVE_KPROBES
+	depends on MODULES
+	select KPROBES
+	default y
+	help
+	  If set to Y the debug core will use the kprobe blocklist to
+	  identify symbols where it is unsafe to set breakpoints.
+	  In particular this disallows instrumentation of functions
+	  called during debug trap handling and thus makes it very
+	  difficult to inadvertently provoke recursive trap handling.
+
+	  If unsure, say Y.
+
+config KGDB_SERIAL_CONSOLE
+	tristate "KGDB: use kgdb over the serial console"
+	select CONSOLE_POLL
+	select MAGIC_SYSRQ
+	depends on TTY && HW_CONSOLE
+	default y
+	help
+	  Share a serial console with kgdb. Sysrq-g must be used
+	  to break in initially.
+
+config KGDB_TESTS
+	bool "KGDB: internal test suite"
+	default n
+	help
+	  This is a kgdb I/O module specifically designed to test
+	  kgdb's internal functions.  This kgdb I/O module is
+	  intended to for the development of new kgdb stubs
+	  as well as regression testing the kgdb internals.
+	  See the drivers/misc/kgdbts.c for the details about
+	  the tests.  The most basic of this I/O module is to boot
+	  a kernel boot arguments "kgdbwait kgdbts=V1F100"
+
+config KGDB_TESTS_ON_BOOT
+	bool "KGDB: Run tests on boot"
+	depends on KGDB_TESTS
+	default n
+	help
+	  Run the kgdb tests on boot up automatically without the need
+	  to pass in a kernel parameter
+
+config KGDB_TESTS_BOOT_STRING
+	string "KGDB: which internal kgdb tests to run"
+	depends on KGDB_TESTS_ON_BOOT
+	default "V1F100"
+	help
+	  This is the command string to send the kgdb test suite on
+	  boot.  See the drivers/misc/kgdbts.c for detailed
+	  information about other strings you could use beyond the
+	  default of V1F100.
+
+config KGDB_LOW_LEVEL_TRAP
+       bool "KGDB: Allow debugging with traps in notifiers"
+       depends on X86 || MIPS
+       default n
+       help
+	 This will add an extra call back to kgdb for the breakpoint
+	 exception handler which will allow kgdb to step through a
+	 notify handler.
+
+config KGDB_KDB
+	bool "KGDB_KDB: include kdb frontend for kgdb"
+	default n
+	help
+	  KDB frontend for kernel
+
+config KDB_DEFAULT_ENABLE
+	hex "KDB: Select kdb command functions to be enabled by default"
+	depends on KGDB_KDB
+	default 0x1
+	help
+	  Specifiers which kdb commands are enabled by default. This may
+	  be set to 1 or 0 to enable all commands or disable almost all
+	  commands.
+
+	  Alternatively the following bitmask applies:
+
+	    0x0002 - allow arbitrary reads from memory and symbol lookup
+	    0x0004 - allow arbitrary writes to memory
+	    0x0008 - allow current register state to be inspected
+	    0x0010 - allow current register state to be modified
+	    0x0020 - allow passive inspection (backtrace, process list, lsmod)
+	    0x0040 - allow flow control management (breakpoint, single step)
+	    0x0080 - enable signalling of processes
+	    0x0100 - allow machine to be rebooted
+
+	  The config option merely sets the default at boot time. Both
+	  issuing 'echo X > /sys/module/kdb/parameters/cmd_enable' or
+	  setting with kdb.cmd_enable=X kernel command line option will
+	  override the default settings.
+
+config KDB_KEYBOARD
+	bool "KGDB_KDB: keyboard as input device"
+	depends on VT && KGDB_KDB && !PARISC
+	default n
+	help
+	  KDB can use a PS/2 type keyboard for an input device
+
+config KDB_CONTINUE_CATASTROPHIC
+	int "KDB: continue after catastrophic errors"
+	depends on KGDB_KDB
+	default "0"
+	help
+	  This integer controls the behaviour of kdb when the kernel gets a
+	  catastrophic error, i.e. for a panic or oops.
+	  When KDB is active and a catastrophic error occurs, nothing extra
+	  will happen until you type 'go'.
+	  CONFIG_KDB_CONTINUE_CATASTROPHIC == 0 (default). The first time
+	  you type 'go', you will be warned by kdb. The secend time you type
+	  'go', KDB tries to continue. No guarantees that the
+	  kernel is still usable in this situation.
+	  CONFIG_KDB_CONTINUE_CATASTROPHIC == 1. KDB tries to continue.
+	  No guarantees that the kernel is still usable in this situation.
+	  CONFIG_KDB_CONTINUE_CATASTROPHIC == 2. KDB forces a reboot.
+	  If you are not sure, say 0.
+
+config ARCH_HAS_EARLY_DEBUG
+	bool
+	default n
+	help
+	  If an architecture can definitely handle entering the debugger
+	  when early_param's are parsed then it select this config.
+	  Otherwise, if "kgdbwait" is passed on the kernel command line it
+	  won't actually be processed until dbg_late_init() just after the
+	  call to kgdb_arch_late() is made.
+
+	  NOTE: Even if this isn't selected by an architecture we will
+	  still try to register kgdb to handle breakpoints and crashes
+	  when early_param's are parsed, we just won't act on the
+	  "kgdbwait" parameter until dbg_late_init().  If you get a
+	  crash and try to drop into kgdb somewhere between these two
+	  places you might or might not end up being able to use kgdb
+	  depending on exactly how far along the architecture has initted.
+
+endif # KGDB