Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 356 insertions, 0 deletions

diff --git a/lib/crypto/aes.c b/lib/crypto/aes.c
new file mode 100644
index 000000000..827fe8992
--- /dev/null
+++ b/lib/crypto/aes.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2019 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <crypto/aes.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+#include <asm/unaligned.h>
+
+/*
+ * Emit the sbox as volatile const to prevent the compiler from doing
+ * constant folding on sbox references involving fixed indexes.
+ */
+static volatile const u8 __cacheline_aligned aes_sbox[] = {
+	0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5,
+	0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
+	0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0,
+	0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
+	0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc,
+	0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,
+	0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a,
+	0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,
+	0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0,
+	0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,
+	0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b,
+	0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,
+	0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85,
+	0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,
+	0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5,
+	0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,
+	0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17,
+	0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,
+	0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88,
+	0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,
+	0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c,
+	0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,
+	0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9,
+	0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,
+	0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6,
+	0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,
+	0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e,
+	0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,
+	0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94,
+	0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,
+	0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68,
+	0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16,
+};
+
+static volatile const u8 __cacheline_aligned aes_inv_sbox[] = {
+	0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38,
+	0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb,
+	0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87,
+	0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb,
+	0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d,
+	0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e,
+	0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2,
+	0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25,
+	0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16,
+	0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92,
+	0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda,
+	0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84,
+	0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a,
+	0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06,
+	0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02,
+	0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b,
+	0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea,
+	0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73,
+	0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85,
+	0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e,
+	0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89,
+	0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b,
+	0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20,
+	0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4,
+	0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31,
+	0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f,
+	0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d,
+	0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef,
+	0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0,
+	0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61,
+	0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26,
+	0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d,
+};
+
+extern const u8 crypto_aes_sbox[256] __alias(aes_sbox);
+extern const u8 crypto_aes_inv_sbox[256] __alias(aes_inv_sbox);
+
+EXPORT_SYMBOL(crypto_aes_sbox);
+EXPORT_SYMBOL(crypto_aes_inv_sbox);
+
+static u32 mul_by_x(u32 w)
+{
+	u32 x = w & 0x7f7f7f7f;
+	u32 y = w & 0x80808080;
+
+	/* multiply by polynomial 'x' (0b10) in GF(2^8) */
+	return (x << 1) ^ (y >> 7) * 0x1b;
+}
+
+static u32 mul_by_x2(u32 w)
+{
+	u32 x = w & 0x3f3f3f3f;
+	u32 y = w & 0x80808080;
+	u32 z = w & 0x40404040;
+
+	/* multiply by polynomial 'x^2' (0b100) in GF(2^8) */
+	return (x << 2) ^ (y >> 7) * 0x36 ^ (z >> 6) * 0x1b;
+}
+
+static u32 mix_columns(u32 x)
+{
+	/*
+	 * Perform the following matrix multiplication in GF(2^8)
+	 *
+	 * | 0x2 0x3 0x1 0x1 |   | x[0] |
+	 * | 0x1 0x2 0x3 0x1 |   | x[1] |
+	 * | 0x1 0x1 0x2 0x3 | x | x[2] |
+	 * | 0x3 0x1 0x1 0x2 |   | x[3] |
+	 */
+	u32 y = mul_by_x(x) ^ ror32(x, 16);
+
+	return y ^ ror32(x ^ y, 8);
+}
+
+static u32 inv_mix_columns(u32 x)
+{
+	/*
+	 * Perform the following matrix multiplication in GF(2^8)
+	 *
+	 * | 0xe 0xb 0xd 0x9 |   | x[0] |
+	 * | 0x9 0xe 0xb 0xd |   | x[1] |
+	 * | 0xd 0x9 0xe 0xb | x | x[2] |
+	 * | 0xb 0xd 0x9 0xe |   | x[3] |
+	 *
+	 * which can conveniently be reduced to
+	 *
+	 * | 0x2 0x3 0x1 0x1 |   | 0x5 0x0 0x4 0x0 |   | x[0] |
+	 * | 0x1 0x2 0x3 0x1 |   | 0x0 0x5 0x0 0x4 |   | x[1] |
+	 * | 0x1 0x1 0x2 0x3 | x | 0x4 0x0 0x5 0x0 | x | x[2] |
+	 * | 0x3 0x1 0x1 0x2 |   | 0x0 0x4 0x0 0x5 |   | x[3] |
+	 */
+	u32 y = mul_by_x2(x);
+
+	return mix_columns(x ^ y ^ ror32(y, 16));
+}
+
+static __always_inline u32 subshift(u32 in[], int pos)
+{
+	return (aes_sbox[in[pos] & 0xff]) ^
+	       (aes_sbox[(in[(pos + 1) % 4] >>  8) & 0xff] <<  8) ^
+	       (aes_sbox[(in[(pos + 2) % 4] >> 16) & 0xff] << 16) ^
+	       (aes_sbox[(in[(pos + 3) % 4] >> 24) & 0xff] << 24);
+}
+
+static __always_inline u32 inv_subshift(u32 in[], int pos)
+{
+	return (aes_inv_sbox[in[pos] & 0xff]) ^
+	       (aes_inv_sbox[(in[(pos + 3) % 4] >>  8) & 0xff] <<  8) ^
+	       (aes_inv_sbox[(in[(pos + 2) % 4] >> 16) & 0xff] << 16) ^
+	       (aes_inv_sbox[(in[(pos + 1) % 4] >> 24) & 0xff] << 24);
+}
+
+static u32 subw(u32 in)
+{
+	return (aes_sbox[in & 0xff]) ^
+	       (aes_sbox[(in >>  8) & 0xff] <<  8) ^
+	       (aes_sbox[(in >> 16) & 0xff] << 16) ^
+	       (aes_sbox[(in >> 24) & 0xff] << 24);
+}
+
+/**
+ * aes_expandkey - Expands the AES key as described in FIPS-197
+ * @ctx:	The location where the computed key will be stored.
+ * @in_key:	The supplied key.
+ * @key_len:	The length of the supplied key.
+ *
+ * Returns 0 on success. The function fails only if an invalid key size (or
+ * pointer) is supplied.
+ * The expanded key size is 240 bytes (max of 14 rounds with a unique 16 bytes
+ * key schedule plus a 16 bytes key which is used before the first round).
+ * The decryption key is prepared for the "Equivalent Inverse Cipher" as
+ * described in FIPS-197. The first slot (16 bytes) of each key (enc or dec) is
+ * for the initial combination, the second slot for the first round and so on.
+ */
+int aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
+		  unsigned int key_len)
+{
+	u32 kwords = key_len / sizeof(u32);
+	u32 rc, i, j;
+	int err;
+
+	err = aes_check_keylen(key_len);
+	if (err)
+		return err;
+
+	ctx->key_length = key_len;
+
+	for (i = 0; i < kwords; i++)
+		ctx->key_enc[i] = get_unaligned_le32(in_key + i * sizeof(u32));
+
+	for (i = 0, rc = 1; i < 10; i++, rc = mul_by_x(rc)) {
+		u32 *rki = ctx->key_enc + (i * kwords);
+		u32 *rko = rki + kwords;
+
+		rko[0] = ror32(subw(rki[kwords - 1]), 8) ^ rc ^ rki[0];
+		rko[1] = rko[0] ^ rki[1];
+		rko[2] = rko[1] ^ rki[2];
+		rko[3] = rko[2] ^ rki[3];
+
+		if (key_len == AES_KEYSIZE_192) {
+			if (i >= 7)
+				break;
+			rko[4] = rko[3] ^ rki[4];
+			rko[5] = rko[4] ^ rki[5];
+		} else if (key_len == AES_KEYSIZE_256) {
+			if (i >= 6)
+				break;
+			rko[4] = subw(rko[3]) ^ rki[4];
+			rko[5] = rko[4] ^ rki[5];
+			rko[6] = rko[5] ^ rki[6];
+			rko[7] = rko[6] ^ rki[7];
+		}
+	}
+
+	/*
+	 * Generate the decryption keys for the Equivalent Inverse Cipher.
+	 * This involves reversing the order of the round keys, and applying
+	 * the Inverse Mix Columns transformation to all but the first and
+	 * the last one.
+	 */
+	ctx->key_dec[0] = ctx->key_enc[key_len + 24];
+	ctx->key_dec[1] = ctx->key_enc[key_len + 25];
+	ctx->key_dec[2] = ctx->key_enc[key_len + 26];
+	ctx->key_dec[3] = ctx->key_enc[key_len + 27];
+
+	for (i = 4, j = key_len + 20; j > 0; i += 4, j -= 4) {
+		ctx->key_dec[i]     = inv_mix_columns(ctx->key_enc[j]);
+		ctx->key_dec[i + 1] = inv_mix_columns(ctx->key_enc[j + 1]);
+		ctx->key_dec[i + 2] = inv_mix_columns(ctx->key_enc[j + 2]);
+		ctx->key_dec[i + 3] = inv_mix_columns(ctx->key_enc[j + 3]);
+	}
+
+	ctx->key_dec[i]     = ctx->key_enc[0];
+	ctx->key_dec[i + 1] = ctx->key_enc[1];
+	ctx->key_dec[i + 2] = ctx->key_enc[2];
+	ctx->key_dec[i + 3] = ctx->key_enc[3];
+
+	return 0;
+}
+EXPORT_SYMBOL(aes_expandkey);
+
+/**
+ * aes_encrypt - Encrypt a single AES block
+ * @ctx:	Context struct containing the key schedule
+ * @out:	Buffer to store the ciphertext
+ * @in:		Buffer containing the plaintext
+ */
+void aes_encrypt(const struct crypto_aes_ctx *ctx, u8 *out, const u8 *in)
+{
+	const u32 *rkp = ctx->key_enc + 4;
+	int rounds = 6 + ctx->key_length / 4;
+	u32 st0[4], st1[4];
+	int round;
+
+	st0[0] = ctx->key_enc[0] ^ get_unaligned_le32(in);
+	st0[1] = ctx->key_enc[1] ^ get_unaligned_le32(in + 4);
+	st0[2] = ctx->key_enc[2] ^ get_unaligned_le32(in + 8);
+	st0[3] = ctx->key_enc[3] ^ get_unaligned_le32(in + 12);
+
+	/*
+	 * Force the compiler to emit data independent Sbox references,
+	 * by xoring the input with Sbox values that are known to add up
+	 * to zero. This pulls the entire Sbox into the D-cache before any
+	 * data dependent lookups are done.
+	 */
+	st0[0] ^= aes_sbox[ 0] ^ aes_sbox[ 64] ^ aes_sbox[134] ^ aes_sbox[195];
+	st0[1] ^= aes_sbox[16] ^ aes_sbox[ 82] ^ aes_sbox[158] ^ aes_sbox[221];
+	st0[2] ^= aes_sbox[32] ^ aes_sbox[ 96] ^ aes_sbox[160] ^ aes_sbox[234];
+	st0[3] ^= aes_sbox[48] ^ aes_sbox[112] ^ aes_sbox[186] ^ aes_sbox[241];
+
+	for (round = 0;; round += 2, rkp += 8) {
+		st1[0] = mix_columns(subshift(st0, 0)) ^ rkp[0];
+		st1[1] = mix_columns(subshift(st0, 1)) ^ rkp[1];
+		st1[2] = mix_columns(subshift(st0, 2)) ^ rkp[2];
+		st1[3] = mix_columns(subshift(st0, 3)) ^ rkp[3];
+
+		if (round == rounds - 2)
+			break;
+
+		st0[0] = mix_columns(subshift(st1, 0)) ^ rkp[4];
+		st0[1] = mix_columns(subshift(st1, 1)) ^ rkp[5];
+		st0[2] = mix_columns(subshift(st1, 2)) ^ rkp[6];
+		st0[3] = mix_columns(subshift(st1, 3)) ^ rkp[7];
+	}
+
+	put_unaligned_le32(subshift(st1, 0) ^ rkp[4], out);
+	put_unaligned_le32(subshift(st1, 1) ^ rkp[5], out + 4);
+	put_unaligned_le32(subshift(st1, 2) ^ rkp[6], out + 8);
+	put_unaligned_le32(subshift(st1, 3) ^ rkp[7], out + 12);
+}
+EXPORT_SYMBOL(aes_encrypt);
+
+/**
+ * aes_decrypt - Decrypt a single AES block
+ * @ctx:	Context struct containing the key schedule
+ * @out:	Buffer to store the plaintext
+ * @in:		Buffer containing the ciphertext
+ */
+void aes_decrypt(const struct crypto_aes_ctx *ctx, u8 *out, const u8 *in)
+{
+	const u32 *rkp = ctx->key_dec + 4;
+	int rounds = 6 + ctx->key_length / 4;
+	u32 st0[4], st1[4];
+	int round;
+
+	st0[0] = ctx->key_dec[0] ^ get_unaligned_le32(in);
+	st0[1] = ctx->key_dec[1] ^ get_unaligned_le32(in + 4);
+	st0[2] = ctx->key_dec[2] ^ get_unaligned_le32(in + 8);
+	st0[3] = ctx->key_dec[3] ^ get_unaligned_le32(in + 12);
+
+	/*
+	 * Force the compiler to emit data independent Sbox references,
+	 * by xoring the input with Sbox values that are known to add up
+	 * to zero. This pulls the entire Sbox into the D-cache before any
+	 * data dependent lookups are done.
+	 */
+	st0[0] ^= aes_inv_sbox[ 0] ^ aes_inv_sbox[ 64] ^ aes_inv_sbox[129] ^ aes_inv_sbox[200];
+	st0[1] ^= aes_inv_sbox[16] ^ aes_inv_sbox[ 83] ^ aes_inv_sbox[150] ^ aes_inv_sbox[212];
+	st0[2] ^= aes_inv_sbox[32] ^ aes_inv_sbox[ 96] ^ aes_inv_sbox[160] ^ aes_inv_sbox[236];
+	st0[3] ^= aes_inv_sbox[48] ^ aes_inv_sbox[112] ^ aes_inv_sbox[187] ^ aes_inv_sbox[247];
+
+	for (round = 0;; round += 2, rkp += 8) {
+		st1[0] = inv_mix_columns(inv_subshift(st0, 0)) ^ rkp[0];
+		st1[1] = inv_mix_columns(inv_subshift(st0, 1)) ^ rkp[1];
+		st1[2] = inv_mix_columns(inv_subshift(st0, 2)) ^ rkp[2];
+		st1[3] = inv_mix_columns(inv_subshift(st0, 3)) ^ rkp[3];
+
+		if (round == rounds - 2)
+			break;
+
+		st0[0] = inv_mix_columns(inv_subshift(st1, 0)) ^ rkp[4];
+		st0[1] = inv_mix_columns(inv_subshift(st1, 1)) ^ rkp[5];
+		st0[2] = inv_mix_columns(inv_subshift(st1, 2)) ^ rkp[6];
+		st0[3] = inv_mix_columns(inv_subshift(st1, 3)) ^ rkp[7];
+	}
+
+	put_unaligned_le32(inv_subshift(st1, 0) ^ rkp[4], out);
+	put_unaligned_le32(inv_subshift(st1, 1) ^ rkp[5], out + 4);
+	put_unaligned_le32(inv_subshift(st1, 2) ^ rkp[6], out + 8);
+	put_unaligned_le32(inv_subshift(st1, 3) ^ rkp[7], out + 12);
+}
+EXPORT_SYMBOL(aes_decrypt);
+
+MODULE_DESCRIPTION("Generic AES library");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");