Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 141 insertions, 0 deletions

diff --git a/lib/earlycpio.c b/lib/earlycpio.c
new file mode 100644
index 000000000..d2c37d64f
--- /dev/null
+++ b/lib/earlycpio.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* ----------------------------------------------------------------------- *
+ *
+ *   Copyright 2012 Intel Corporation; author H. Peter Anvin
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * earlycpio.c
+ *
+ * Find a specific cpio member; must precede any compressed content.
+ * This is used to locate data items in the initramfs used by the
+ * kernel itself during early boot (before the main initramfs is
+ * decompressed.)  It is the responsibility of the initramfs creator
+ * to ensure that these items are uncompressed at the head of the
+ * blob.  Depending on the boot loader or package tool that may be a
+ * separate file or part of the same file.
+ */
+
+#include <linux/earlycpio.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+enum cpio_fields {
+	C_MAGIC,
+	C_INO,
+	C_MODE,
+	C_UID,
+	C_GID,
+	C_NLINK,
+	C_MTIME,
+	C_FILESIZE,
+	C_MAJ,
+	C_MIN,
+	C_RMAJ,
+	C_RMIN,
+	C_NAMESIZE,
+	C_CHKSUM,
+	C_NFIELDS
+};
+
+/**
+ * find_cpio_data - Search for files in an uncompressed cpio
+ * @path:       The directory to search for, including a slash at the end
+ * @data:       Pointer to the cpio archive or a header inside
+ * @len:        Remaining length of the cpio based on data pointer
+ * @nextoff:    When a matching file is found, this is the offset from the
+ *              beginning of the cpio to the beginning of the next file, not the
+ *              matching file itself. It can be used to iterate through the cpio
+ *              to find all files inside of a directory path.
+ *
+ * Return:      &struct cpio_data containing the address, length and
+ *              filename (with the directory path cut off) of the found file.
+ *              If you search for a filename and not for files in a directory,
+ *              pass the absolute path of the filename in the cpio and make sure
+ *              the match returned an empty filename string.
+ */
+
+struct cpio_data find_cpio_data(const char *path, void *data,
+				size_t len,  long *nextoff)
+{
+	const size_t cpio_header_len = 8*C_NFIELDS - 2;
+	struct cpio_data cd = { NULL, 0, "" };
+	const char *p, *dptr, *nptr;
+	unsigned int ch[C_NFIELDS], *chp, v;
+	unsigned char c, x;
+	size_t mypathsize = strlen(path);
+	int i, j;
+
+	p = data;
+
+	while (len > cpio_header_len) {
+		if (!*p) {
+			/* All cpio headers need to be 4-byte aligned */
+			p += 4;
+			len -= 4;
+			continue;
+		}
+
+		j = 6;		/* The magic field is only 6 characters */
+		chp = ch;
+		for (i = C_NFIELDS; i; i--) {
+			v = 0;
+			while (j--) {
+				v <<= 4;
+				c = *p++;
+
+				x = c - '0';
+				if (x < 10) {
+					v += x;
+					continue;
+				}
+
+				x = (c | 0x20) - 'a';
+				if (x < 6) {
+					v += x + 10;
+					continue;
+				}
+
+				goto quit; /* Invalid hexadecimal */
+			}
+			*chp++ = v;
+			j = 8;	/* All other fields are 8 characters */
+		}
+
+		if ((ch[C_MAGIC] - 0x070701) > 1)
+			goto quit; /* Invalid magic */
+
+		len -= cpio_header_len;
+
+		dptr = PTR_ALIGN(p + ch[C_NAMESIZE], 4);
+		nptr = PTR_ALIGN(dptr + ch[C_FILESIZE], 4);
+
+		if (nptr > p + len || dptr < p || nptr < dptr)
+			goto quit; /* Buffer overrun */
+
+		if ((ch[C_MODE] & 0170000) == 0100000 &&
+		    ch[C_NAMESIZE] >= mypathsize &&
+		    !memcmp(p, path, mypathsize)) {
+
+			if (nextoff)
+				*nextoff = (long)nptr - (long)data;
+
+			if (ch[C_NAMESIZE] - mypathsize >= MAX_CPIO_FILE_NAME) {
+				pr_warn(
+				"File %s exceeding MAX_CPIO_FILE_NAME [%d]\n",
+				p, MAX_CPIO_FILE_NAME);
+			}
+			strscpy(cd.name, p + mypathsize, MAX_CPIO_FILE_NAME);
+
+			cd.data = (void *)dptr;
+			cd.size = ch[C_FILESIZE];
+			return cd; /* Found it! */
+		}
+		len -= (nptr - p);
+		p = nptr;
+	}
+
+quit:
+	return cd;
+}