Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 429 insertions, 0 deletions

diff --git a/lib/iomap.c b/lib/iomap.c
new file mode 100644
index 000000000..4f8b31baa
--- /dev/null
+++ b/lib/iomap.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Implement the default iomap interfaces
+ *
+ * (C) Copyright 2004 Linus Torvalds
+ */
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/kmsan-checks.h>
+
+#include <linux/export.h>
+
+/*
+ * Read/write from/to an (offsettable) iomem cookie. It might be a PIO
+ * access or a MMIO access, these functions don't care. The info is
+ * encoded in the hardware mapping set up by the mapping functions
+ * (or the cookie itself, depending on implementation and hw).
+ *
+ * The generic routines don't assume any hardware mappings, and just
+ * encode the PIO/MMIO as part of the cookie. They coldly assume that
+ * the MMIO IO mappings are not in the low address range.
+ *
+ * Architectures for which this is not true can't use this generic
+ * implementation and should do their own copy.
+ */
+
+#ifndef HAVE_ARCH_PIO_SIZE
+/*
+ * We encode the physical PIO addresses (0-0xffff) into the
+ * pointer by offsetting them with a constant (0x10000) and
+ * assuming that all the low addresses are always PIO. That means
+ * we can do some sanity checks on the low bits, and don't
+ * need to just take things for granted.
+ */
+#define PIO_OFFSET	0x10000UL
+#define PIO_MASK	0x0ffffUL
+#define PIO_RESERVED	0x40000UL
+#endif
+
+static void bad_io_access(unsigned long port, const char *access)
+{
+	static int count = 10;
+	if (count) {
+		count--;
+		WARN(1, KERN_ERR "Bad IO access at port %#lx (%s)\n", port, access);
+	}
+}
+
+/*
+ * Ugly macros are a way of life.
+ */
+#define IO_COND(addr, is_pio, is_mmio) do {			\
+	unsigned long port = (unsigned long __force)addr;	\
+	if (port >= PIO_RESERVED) {				\
+		is_mmio;					\
+	} else if (port > PIO_OFFSET) {				\
+		port &= PIO_MASK;				\
+		is_pio;						\
+	} else							\
+		bad_io_access(port, #is_pio );			\
+} while (0)
+
+#ifndef pio_read16be
+#define pio_read16be(port) swab16(inw(port))
+#define pio_read32be(port) swab32(inl(port))
+#endif
+
+#ifndef mmio_read16be
+#define mmio_read16be(addr) swab16(readw(addr))
+#define mmio_read32be(addr) swab32(readl(addr))
+#define mmio_read64be(addr) swab64(readq(addr))
+#endif
+
+/*
+ * Here and below, we apply __no_kmsan_checks to functions reading data from
+ * hardware, to ensure that KMSAN marks their return values as initialized.
+ */
+__no_kmsan_checks
+unsigned int ioread8(const void __iomem *addr)
+{
+	IO_COND(addr, return inb(port), return readb(addr));
+	return 0xff;
+}
+__no_kmsan_checks
+unsigned int ioread16(const void __iomem *addr)
+{
+	IO_COND(addr, return inw(port), return readw(addr));
+	return 0xffff;
+}
+__no_kmsan_checks
+unsigned int ioread16be(const void __iomem *addr)
+{
+	IO_COND(addr, return pio_read16be(port), return mmio_read16be(addr));
+	return 0xffff;
+}
+__no_kmsan_checks
+unsigned int ioread32(const void __iomem *addr)
+{
+	IO_COND(addr, return inl(port), return readl(addr));
+	return 0xffffffff;
+}
+__no_kmsan_checks
+unsigned int ioread32be(const void __iomem *addr)
+{
+	IO_COND(addr, return pio_read32be(port), return mmio_read32be(addr));
+	return 0xffffffff;
+}
+EXPORT_SYMBOL(ioread8);
+EXPORT_SYMBOL(ioread16);
+EXPORT_SYMBOL(ioread16be);
+EXPORT_SYMBOL(ioread32);
+EXPORT_SYMBOL(ioread32be);
+
+#ifdef readq
+static u64 pio_read64_lo_hi(unsigned long port)
+{
+	u64 lo, hi;
+
+	lo = inl(port);
+	hi = inl(port + sizeof(u32));
+
+	return lo | (hi << 32);
+}
+
+static u64 pio_read64_hi_lo(unsigned long port)
+{
+	u64 lo, hi;
+
+	hi = inl(port + sizeof(u32));
+	lo = inl(port);
+
+	return lo | (hi << 32);
+}
+
+static u64 pio_read64be_lo_hi(unsigned long port)
+{
+	u64 lo, hi;
+
+	lo = pio_read32be(port + sizeof(u32));
+	hi = pio_read32be(port);
+
+	return lo | (hi << 32);
+}
+
+static u64 pio_read64be_hi_lo(unsigned long port)
+{
+	u64 lo, hi;
+
+	hi = pio_read32be(port);
+	lo = pio_read32be(port + sizeof(u32));
+
+	return lo | (hi << 32);
+}
+
+__no_kmsan_checks
+u64 ioread64_lo_hi(const void __iomem *addr)
+{
+	IO_COND(addr, return pio_read64_lo_hi(port), return readq(addr));
+	return 0xffffffffffffffffULL;
+}
+
+__no_kmsan_checks
+u64 ioread64_hi_lo(const void __iomem *addr)
+{
+	IO_COND(addr, return pio_read64_hi_lo(port), return readq(addr));
+	return 0xffffffffffffffffULL;
+}
+
+__no_kmsan_checks
+u64 ioread64be_lo_hi(const void __iomem *addr)
+{
+	IO_COND(addr, return pio_read64be_lo_hi(port),
+		return mmio_read64be(addr));
+	return 0xffffffffffffffffULL;
+}
+
+__no_kmsan_checks
+u64 ioread64be_hi_lo(const void __iomem *addr)
+{
+	IO_COND(addr, return pio_read64be_hi_lo(port),
+		return mmio_read64be(addr));
+	return 0xffffffffffffffffULL;
+}
+
+EXPORT_SYMBOL(ioread64_lo_hi);
+EXPORT_SYMBOL(ioread64_hi_lo);
+EXPORT_SYMBOL(ioread64be_lo_hi);
+EXPORT_SYMBOL(ioread64be_hi_lo);
+
+#endif /* readq */
+
+#ifndef pio_write16be
+#define pio_write16be(val,port) outw(swab16(val),port)
+#define pio_write32be(val,port) outl(swab32(val),port)
+#endif
+
+#ifndef mmio_write16be
+#define mmio_write16be(val,port) writew(swab16(val),port)
+#define mmio_write32be(val,port) writel(swab32(val),port)
+#define mmio_write64be(val,port) writeq(swab64(val),port)
+#endif
+
+void iowrite8(u8 val, void __iomem *addr)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(&val, sizeof(val));
+	IO_COND(addr, outb(val,port), writeb(val, addr));
+}
+void iowrite16(u16 val, void __iomem *addr)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(&val, sizeof(val));
+	IO_COND(addr, outw(val,port), writew(val, addr));
+}
+void iowrite16be(u16 val, void __iomem *addr)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(&val, sizeof(val));
+	IO_COND(addr, pio_write16be(val,port), mmio_write16be(val, addr));
+}
+void iowrite32(u32 val, void __iomem *addr)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(&val, sizeof(val));
+	IO_COND(addr, outl(val,port), writel(val, addr));
+}
+void iowrite32be(u32 val, void __iomem *addr)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(&val, sizeof(val));
+	IO_COND(addr, pio_write32be(val,port), mmio_write32be(val, addr));
+}
+EXPORT_SYMBOL(iowrite8);
+EXPORT_SYMBOL(iowrite16);
+EXPORT_SYMBOL(iowrite16be);
+EXPORT_SYMBOL(iowrite32);
+EXPORT_SYMBOL(iowrite32be);
+
+#ifdef writeq
+static void pio_write64_lo_hi(u64 val, unsigned long port)
+{
+	outl(val, port);
+	outl(val >> 32, port + sizeof(u32));
+}
+
+static void pio_write64_hi_lo(u64 val, unsigned long port)
+{
+	outl(val >> 32, port + sizeof(u32));
+	outl(val, port);
+}
+
+static void pio_write64be_lo_hi(u64 val, unsigned long port)
+{
+	pio_write32be(val, port + sizeof(u32));
+	pio_write32be(val >> 32, port);
+}
+
+static void pio_write64be_hi_lo(u64 val, unsigned long port)
+{
+	pio_write32be(val >> 32, port);
+	pio_write32be(val, port + sizeof(u32));
+}
+
+void iowrite64_lo_hi(u64 val, void __iomem *addr)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(&val, sizeof(val));
+	IO_COND(addr, pio_write64_lo_hi(val, port),
+		writeq(val, addr));
+}
+
+void iowrite64_hi_lo(u64 val, void __iomem *addr)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(&val, sizeof(val));
+	IO_COND(addr, pio_write64_hi_lo(val, port),
+		writeq(val, addr));
+}
+
+void iowrite64be_lo_hi(u64 val, void __iomem *addr)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(&val, sizeof(val));
+	IO_COND(addr, pio_write64be_lo_hi(val, port),
+		mmio_write64be(val, addr));
+}
+
+void iowrite64be_hi_lo(u64 val, void __iomem *addr)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(&val, sizeof(val));
+	IO_COND(addr, pio_write64be_hi_lo(val, port),
+		mmio_write64be(val, addr));
+}
+
+EXPORT_SYMBOL(iowrite64_lo_hi);
+EXPORT_SYMBOL(iowrite64_hi_lo);
+EXPORT_SYMBOL(iowrite64be_lo_hi);
+EXPORT_SYMBOL(iowrite64be_hi_lo);
+
+#endif /* readq */
+
+/*
+ * These are the "repeat MMIO read/write" functions.
+ * Note the "__raw" accesses, since we don't want to
+ * convert to CPU byte order. We write in "IO byte
+ * order" (we also don't have IO barriers).
+ */
+#ifndef mmio_insb
+static inline void mmio_insb(const void __iomem *addr, u8 *dst, int count)
+{
+	while (--count >= 0) {
+		u8 data = __raw_readb(addr);
+		*dst = data;
+		dst++;
+	}
+}
+static inline void mmio_insw(const void __iomem *addr, u16 *dst, int count)
+{
+	while (--count >= 0) {
+		u16 data = __raw_readw(addr);
+		*dst = data;
+		dst++;
+	}
+}
+static inline void mmio_insl(const void __iomem *addr, u32 *dst, int count)
+{
+	while (--count >= 0) {
+		u32 data = __raw_readl(addr);
+		*dst = data;
+		dst++;
+	}
+}
+#endif
+
+#ifndef mmio_outsb
+static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writeb(*src, addr);
+		src++;
+	}
+}
+static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writew(*src, addr);
+		src++;
+	}
+}
+static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writel(*src, addr);
+		src++;
+	}
+}
+#endif
+
+void ioread8_rep(const void __iomem *addr, void *dst, unsigned long count)
+{
+	IO_COND(addr, insb(port,dst,count), mmio_insb(addr, dst, count));
+	/* KMSAN must treat values read from devices as initialized. */
+	kmsan_unpoison_memory(dst, count);
+}
+void ioread16_rep(const void __iomem *addr, void *dst, unsigned long count)
+{
+	IO_COND(addr, insw(port,dst,count), mmio_insw(addr, dst, count));
+	/* KMSAN must treat values read from devices as initialized. */
+	kmsan_unpoison_memory(dst, count * 2);
+}
+void ioread32_rep(const void __iomem *addr, void *dst, unsigned long count)
+{
+	IO_COND(addr, insl(port,dst,count), mmio_insl(addr, dst, count));
+	/* KMSAN must treat values read from devices as initialized. */
+	kmsan_unpoison_memory(dst, count * 4);
+}
+EXPORT_SYMBOL(ioread8_rep);
+EXPORT_SYMBOL(ioread16_rep);
+EXPORT_SYMBOL(ioread32_rep);
+
+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(src, count);
+	IO_COND(addr, outsb(port, src, count), mmio_outsb(addr, src, count));
+}
+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(src, count * 2);
+	IO_COND(addr, outsw(port, src, count), mmio_outsw(addr, src, count));
+}
+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	/* Make sure uninitialized memory isn't copied to devices. */
+	kmsan_check_memory(src, count * 4);
+	IO_COND(addr, outsl(port, src,count), mmio_outsl(addr, src, count));
+}
+EXPORT_SYMBOL(iowrite8_rep);
+EXPORT_SYMBOL(iowrite16_rep);
+EXPORT_SYMBOL(iowrite32_rep);
+
+#ifdef CONFIG_HAS_IOPORT_MAP
+/* Create a virtual mapping cookie for an IO port range */
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	if (port > PIO_MASK)
+		return NULL;
+	return (void __iomem *) (unsigned long) (port + PIO_OFFSET);
+}
+
+void ioport_unmap(void __iomem *addr)
+{
+	/* Nothing to do */
+}
+EXPORT_SYMBOL(ioport_map);
+EXPORT_SYMBOL(ioport_unmap);
+#endif /* CONFIG_HAS_IOPORT_MAP */
+
+#ifdef CONFIG_PCI
+/* Hide the details if this is a MMIO or PIO address space and just do what
+ * you expect in the correct way. */
+void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
+{
+	IO_COND(addr, /* nothing */, iounmap(addr));
+}
+EXPORT_SYMBOL(pci_iounmap);
+#endif /* CONFIG_PCI */