Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 232 insertions, 0 deletions

diff --git a/lib/mpi/mpi-internal.h b/lib/mpi/mpi-internal.h
new file mode 100644
index 000000000..554002182
--- /dev/null
+++ b/lib/mpi/mpi-internal.h
@@ -0,0 +1,232 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* mpi-internal.h  -  Internal to the Multi Precision Integers
+ *	Copyright (C) 1994, 1996 Free Software Foundation, Inc.
+ *	Copyright (C) 1998, 2000 Free Software Foundation, Inc.
+ *
+ * This file is part of GnuPG.
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ *	 The GNU MP Library itself is published under the LGPL;
+ *	 however I decided to publish this code under the plain GPL.
+ */
+
+#ifndef G10_MPI_INTERNAL_H
+#define G10_MPI_INTERNAL_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/mpi.h>
+#include <linux/errno.h>
+
+#define log_debug printk
+#define log_bug printk
+
+#define assert(x) \
+	do { \
+		if (!x) \
+			log_bug("failed assertion\n"); \
+	} while (0);
+
+/* If KARATSUBA_THRESHOLD is not already defined, define it to a
+ * value which is good on most machines.  */
+
+/* tested 4, 16, 32 and 64, where 16 gave the best performance when
+ * checking a 768 and a 1024 bit ElGamal signature.
+ * (wk 22.12.97) */
+#ifndef KARATSUBA_THRESHOLD
+#define KARATSUBA_THRESHOLD 16
+#endif
+
+/* The code can't handle KARATSUBA_THRESHOLD smaller than 2.  */
+#if KARATSUBA_THRESHOLD < 2
+#undef KARATSUBA_THRESHOLD
+#define KARATSUBA_THRESHOLD 2
+#endif
+
+typedef mpi_limb_t *mpi_ptr_t;	/* pointer to a limb */
+typedef int mpi_size_t;		/* (must be a signed type) */
+
+#define RESIZE_IF_NEEDED(a, b)			\
+	do {					\
+		if ((a)->alloced < (b))		\
+			mpi_resize((a), (b));	\
+	} while (0)
+
+/* Copy N limbs from S to D.  */
+#define MPN_COPY(d, s, n) \
+	do {					\
+		mpi_size_t _i;			\
+		for (_i = 0; _i < (n); _i++)	\
+			(d)[_i] = (s)[_i];	\
+	} while (0)
+
+#define MPN_COPY_INCR(d, s, n)		\
+	do {					\
+		mpi_size_t _i;			\
+		for (_i = 0; _i < (n); _i++)	\
+			(d)[_i] = (s)[_i];	\
+	} while (0)
+
+
+#define MPN_COPY_DECR(d, s, n) \
+	do {					\
+		mpi_size_t _i;			\
+		for (_i = (n)-1; _i >= 0; _i--) \
+			(d)[_i] = (s)[_i];	\
+	} while (0)
+
+/* Zero N limbs at D */
+#define MPN_ZERO(d, n) \
+	do {					\
+		int  _i;			\
+		for (_i = 0; _i < (n); _i++)	\
+			(d)[_i] = 0;		\
+	} while (0)
+
+#define MPN_NORMALIZE(d, n)  \
+	do {					\
+		while ((n) > 0) {		\
+			if ((d)[(n)-1])		\
+				break;		\
+			(n)--;			\
+		}				\
+	} while (0)
+
+#define MPN_MUL_N_RECURSE(prodp, up, vp, size, tspace) \
+	do {							\
+		if ((size) < KARATSUBA_THRESHOLD)		\
+			mul_n_basecase(prodp, up, vp, size);	\
+		else						\
+			mul_n(prodp, up, vp, size, tspace);	\
+	} while (0);
+
+/* Divide the two-limb number in (NH,,NL) by D, with DI being the largest
+ * limb not larger than (2**(2*BITS_PER_MP_LIMB))/D - (2**BITS_PER_MP_LIMB).
+ * If this would yield overflow, DI should be the largest possible number
+ * (i.e., only ones).  For correct operation, the most significant bit of D
+ * has to be set.  Put the quotient in Q and the remainder in R.
+ */
+#define UDIV_QRNND_PREINV(q, r, nh, nl, d, di)				\
+	do {								\
+		mpi_limb_t _ql __maybe_unused;				\
+		mpi_limb_t _q, _r;					\
+		mpi_limb_t _xh, _xl;					\
+		umul_ppmm(_q, _ql, (nh), (di));				\
+		_q += (nh);	/* DI is 2**BITS_PER_MPI_LIMB too small */ \
+		umul_ppmm(_xh, _xl, _q, (d));				\
+		sub_ddmmss(_xh, _r, (nh), (nl), _xh, _xl);		\
+		if (_xh) {						\
+			sub_ddmmss(_xh, _r, _xh, _r, 0, (d));		\
+			_q++;						\
+			if (_xh) {					\
+				sub_ddmmss(_xh, _r, _xh, _r, 0, (d));	\
+				_q++;					\
+			}						\
+		}							\
+		if (_r >= (d)) {					\
+			_r -= (d);					\
+			_q++;						\
+		}							\
+		(r) = _r;						\
+		(q) = _q;						\
+	} while (0)
+
+
+/*-- mpiutil.c --*/
+mpi_ptr_t mpi_alloc_limb_space(unsigned nlimbs);
+void mpi_free_limb_space(mpi_ptr_t a);
+void mpi_assign_limb_space(MPI a, mpi_ptr_t ap, unsigned nlimbs);
+
+static inline mpi_limb_t mpihelp_add_1(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr,
+			 mpi_size_t s1_size, mpi_limb_t s2_limb);
+mpi_limb_t mpihelp_add_n(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr,
+			 mpi_ptr_t s2_ptr, mpi_size_t size);
+static inline mpi_limb_t mpihelp_add(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr, mpi_size_t s1_size,
+		       mpi_ptr_t s2_ptr, mpi_size_t s2_size);
+
+static inline mpi_limb_t mpihelp_sub_1(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr,
+			 mpi_size_t s1_size, mpi_limb_t s2_limb);
+mpi_limb_t mpihelp_sub_n(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr,
+			 mpi_ptr_t s2_ptr, mpi_size_t size);
+static inline mpi_limb_t mpihelp_sub(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr, mpi_size_t s1_size,
+		       mpi_ptr_t s2_ptr, mpi_size_t s2_size);
+
+/*-- mpih-cmp.c --*/
+int mpihelp_cmp(mpi_ptr_t op1_ptr, mpi_ptr_t op2_ptr, mpi_size_t size);
+
+/*-- mpih-mul.c --*/
+
+struct karatsuba_ctx {
+	struct karatsuba_ctx *next;
+	mpi_ptr_t tspace;
+	mpi_size_t tspace_size;
+	mpi_ptr_t tp;
+	mpi_size_t tp_size;
+};
+
+void mpihelp_release_karatsuba_ctx(struct karatsuba_ctx *ctx);
+
+mpi_limb_t mpihelp_addmul_1(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr,
+			    mpi_size_t s1_size, mpi_limb_t s2_limb);
+mpi_limb_t mpihelp_submul_1(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr,
+			    mpi_size_t s1_size, mpi_limb_t s2_limb);
+int mpihelp_mul(mpi_ptr_t prodp, mpi_ptr_t up, mpi_size_t usize,
+		mpi_ptr_t vp, mpi_size_t vsize, mpi_limb_t *_result);
+void mpih_sqr_n_basecase(mpi_ptr_t prodp, mpi_ptr_t up, mpi_size_t size);
+void mpih_sqr_n(mpi_ptr_t prodp, mpi_ptr_t up, mpi_size_t size,
+		mpi_ptr_t tspace);
+void mpihelp_mul_n(mpi_ptr_t prodp,
+		mpi_ptr_t up, mpi_ptr_t vp, mpi_size_t size);
+
+int mpihelp_mul_karatsuba_case(mpi_ptr_t prodp,
+			       mpi_ptr_t up, mpi_size_t usize,
+			       mpi_ptr_t vp, mpi_size_t vsize,
+			       struct karatsuba_ctx *ctx);
+
+/*-- generic_mpih-mul1.c --*/
+mpi_limb_t mpihelp_mul_1(mpi_ptr_t res_ptr, mpi_ptr_t s1_ptr,
+			 mpi_size_t s1_size, mpi_limb_t s2_limb);
+
+/*-- mpih-div.c --*/
+mpi_limb_t mpihelp_mod_1(mpi_ptr_t dividend_ptr, mpi_size_t dividend_size,
+			 mpi_limb_t divisor_limb);
+mpi_limb_t mpihelp_divrem(mpi_ptr_t qp, mpi_size_t qextra_limbs,
+			  mpi_ptr_t np, mpi_size_t nsize,
+			  mpi_ptr_t dp, mpi_size_t dsize);
+mpi_limb_t mpihelp_divmod_1(mpi_ptr_t quot_ptr,
+			    mpi_ptr_t dividend_ptr, mpi_size_t dividend_size,
+			    mpi_limb_t divisor_limb);
+
+/*-- generic_mpih-[lr]shift.c --*/
+mpi_limb_t mpihelp_lshift(mpi_ptr_t wp, mpi_ptr_t up, mpi_size_t usize,
+			  unsigned cnt);
+mpi_limb_t mpihelp_rshift(mpi_ptr_t wp, mpi_ptr_t up, mpi_size_t usize,
+			  unsigned cnt);
+
+/* Define stuff for longlong.h.  */
+#define W_TYPE_SIZE BITS_PER_MPI_LIMB
+typedef mpi_limb_t UWtype;
+typedef unsigned int UHWtype;
+#if defined(__GNUC__)
+typedef unsigned int UQItype __attribute__ ((mode(QI)));
+typedef int SItype __attribute__ ((mode(SI)));
+typedef unsigned int USItype __attribute__ ((mode(SI)));
+typedef int DItype __attribute__ ((mode(DI)));
+typedef unsigned int UDItype __attribute__ ((mode(DI)));
+#else
+typedef unsigned char UQItype;
+typedef long SItype;
+typedef unsigned long USItype;
+#endif
+
+#ifdef __GNUC__
+#include "mpi-inline.h"
+#endif
+
+#endif /*G10_MPI_INTERNAL_H */