Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 330 insertions, 0 deletions

diff --git a/lib/mpi/mpiutil.c b/lib/mpi/mpiutil.c
new file mode 100644
index 000000000..aa8c46544
--- /dev/null
+++ b/lib/mpi/mpiutil.c
@@ -0,0 +1,330 @@
+/* mpiutil.ac  -  Utility functions for MPI
+ * Copyright (C) 1998, 1999 Free Software Foundation, Inc.
+ *
+ * This file is part of GnuPG.
+ *
+ * GnuPG is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * GnuPG is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include "mpi-internal.h"
+
+/* Constants allocated right away at startup.  */
+static MPI constants[MPI_NUMBER_OF_CONSTANTS];
+
+/* Initialize the MPI subsystem.  This is called early and allows to
+ * do some initialization without taking care of threading issues.
+ */
+static int __init mpi_init(void)
+{
+	int idx;
+	unsigned long value;
+
+	for (idx = 0; idx < MPI_NUMBER_OF_CONSTANTS; idx++) {
+		switch (idx) {
+		case MPI_C_ZERO:
+			value = 0;
+			break;
+		case MPI_C_ONE:
+			value = 1;
+			break;
+		case MPI_C_TWO:
+			value = 2;
+			break;
+		case MPI_C_THREE:
+			value = 3;
+			break;
+		case MPI_C_FOUR:
+			value = 4;
+			break;
+		case MPI_C_EIGHT:
+			value = 8;
+			break;
+		default:
+			pr_err("MPI: invalid mpi_const selector %d\n", idx);
+			return -EFAULT;
+		}
+		constants[idx] = mpi_alloc_set_ui(value);
+		constants[idx]->flags = (16|32);
+	}
+
+	return 0;
+}
+postcore_initcall(mpi_init);
+
+/* Return a constant MPI descripbed by NO which is one of the
+ * MPI_C_xxx macros.  There is no need to copy this returned value; it
+ * may be used directly.
+ */
+MPI mpi_const(enum gcry_mpi_constants no)
+{
+	if ((int)no < 0 || no > MPI_NUMBER_OF_CONSTANTS)
+		pr_err("MPI: invalid mpi_const selector %d\n", no);
+	if (!constants[no])
+		pr_err("MPI: MPI subsystem not initialized\n");
+	return constants[no];
+}
+EXPORT_SYMBOL_GPL(mpi_const);
+
+/****************
+ * Note:  It was a bad idea to use the number of limbs to allocate
+ *	  because on a alpha the limbs are large but we normally need
+ *	  integers of n bits - So we should change this to bits (or bytes).
+ *
+ *	  But mpi_alloc is used in a lot of places :-)
+ */
+MPI mpi_alloc(unsigned nlimbs)
+{
+	MPI a;
+
+	a = kmalloc(sizeof *a, GFP_KERNEL);
+	if (!a)
+		return a;
+
+	if (nlimbs) {
+		a->d = mpi_alloc_limb_space(nlimbs);
+		if (!a->d) {
+			kfree(a);
+			return NULL;
+		}
+	} else {
+		a->d = NULL;
+	}
+
+	a->alloced = nlimbs;
+	a->nlimbs = 0;
+	a->sign = 0;
+	a->flags = 0;
+	a->nbits = 0;
+	return a;
+}
+EXPORT_SYMBOL_GPL(mpi_alloc);
+
+mpi_ptr_t mpi_alloc_limb_space(unsigned nlimbs)
+{
+	size_t len = nlimbs * sizeof(mpi_limb_t);
+
+	if (!len)
+		return NULL;
+
+	return kmalloc(len, GFP_KERNEL);
+}
+
+void mpi_free_limb_space(mpi_ptr_t a)
+{
+	if (!a)
+		return;
+
+	kfree_sensitive(a);
+}
+
+void mpi_assign_limb_space(MPI a, mpi_ptr_t ap, unsigned nlimbs)
+{
+	mpi_free_limb_space(a->d);
+	a->d = ap;
+	a->alloced = nlimbs;
+}
+
+/****************
+ * Resize the array of A to NLIMBS. the additional space is cleared
+ * (set to 0) [done by m_realloc()]
+ */
+int mpi_resize(MPI a, unsigned nlimbs)
+{
+	void *p;
+
+	if (nlimbs <= a->alloced)
+		return 0;	/* no need to do it */
+
+	if (a->d) {
+		p = kcalloc(nlimbs, sizeof(mpi_limb_t), GFP_KERNEL);
+		if (!p)
+			return -ENOMEM;
+		memcpy(p, a->d, a->alloced * sizeof(mpi_limb_t));
+		kfree_sensitive(a->d);
+		a->d = p;
+	} else {
+		a->d = kcalloc(nlimbs, sizeof(mpi_limb_t), GFP_KERNEL);
+		if (!a->d)
+			return -ENOMEM;
+	}
+	a->alloced = nlimbs;
+	return 0;
+}
+
+void mpi_clear(MPI a)
+{
+	if (!a)
+		return;
+	a->nlimbs = 0;
+	a->flags = 0;
+}
+EXPORT_SYMBOL_GPL(mpi_clear);
+
+void mpi_free(MPI a)
+{
+	if (!a)
+		return;
+
+	if (a->flags & 4)
+		kfree_sensitive(a->d);
+	else
+		mpi_free_limb_space(a->d);
+
+	if (a->flags & ~7)
+		pr_info("invalid flag value in mpi\n");
+	kfree(a);
+}
+EXPORT_SYMBOL_GPL(mpi_free);
+
+/****************
+ * Note: This copy function should not interpret the MPI
+ *	 but copy it transparently.
+ */
+MPI mpi_copy(MPI a)
+{
+	int i;
+	MPI b;
+
+	if (a) {
+		b = mpi_alloc(a->nlimbs);
+		b->nlimbs = a->nlimbs;
+		b->sign = a->sign;
+		b->flags = a->flags;
+		b->flags &= ~(16|32); /* Reset the immutable and constant flags. */
+		for (i = 0; i < b->nlimbs; i++)
+			b->d[i] = a->d[i];
+	} else
+		b = NULL;
+	return b;
+}
+
+/****************
+ * This function allocates an MPI which is optimized to hold
+ * a value as large as the one given in the argument and allocates it
+ * with the same flags as A.
+ */
+MPI mpi_alloc_like(MPI a)
+{
+	MPI b;
+
+	if (a) {
+		b = mpi_alloc(a->nlimbs);
+		b->nlimbs = 0;
+		b->sign = 0;
+		b->flags = a->flags;
+	} else
+		b = NULL;
+
+	return b;
+}
+
+
+/* Set U into W and release U.  If W is NULL only U will be released. */
+void mpi_snatch(MPI w, MPI u)
+{
+	if (w) {
+		mpi_assign_limb_space(w, u->d, u->alloced);
+		w->nlimbs = u->nlimbs;
+		w->sign   = u->sign;
+		w->flags  = u->flags;
+		u->alloced = 0;
+		u->nlimbs = 0;
+		u->d = NULL;
+	}
+	mpi_free(u);
+}
+
+
+MPI mpi_set(MPI w, MPI u)
+{
+	mpi_ptr_t wp, up;
+	mpi_size_t usize = u->nlimbs;
+	int usign = u->sign;
+
+	if (!w)
+		w = mpi_alloc(mpi_get_nlimbs(u));
+	RESIZE_IF_NEEDED(w, usize);
+	wp = w->d;
+	up = u->d;
+	MPN_COPY(wp, up, usize);
+	w->nlimbs = usize;
+	w->flags = u->flags;
+	w->flags &= ~(16|32); /* Reset the immutable and constant flags.  */
+	w->sign = usign;
+	return w;
+}
+EXPORT_SYMBOL_GPL(mpi_set);
+
+MPI mpi_set_ui(MPI w, unsigned long u)
+{
+	if (!w)
+		w = mpi_alloc(1);
+	/* FIXME: If U is 0 we have no need to resize and thus possible
+	 * allocating the limbs.
+	 */
+	RESIZE_IF_NEEDED(w, 1);
+	w->d[0] = u;
+	w->nlimbs = u ? 1 : 0;
+	w->sign = 0;
+	w->flags = 0;
+	return w;
+}
+EXPORT_SYMBOL_GPL(mpi_set_ui);
+
+MPI mpi_alloc_set_ui(unsigned long u)
+{
+	MPI w = mpi_alloc(1);
+	w->d[0] = u;
+	w->nlimbs = u ? 1 : 0;
+	w->sign = 0;
+	return w;
+}
+
+/****************
+ * Swap the value of A and B, when SWAP is 1.
+ * Leave the value when SWAP is 0.
+ * This implementation should be constant-time regardless of SWAP.
+ */
+void mpi_swap_cond(MPI a, MPI b, unsigned long swap)
+{
+	mpi_size_t i;
+	mpi_size_t nlimbs;
+	mpi_limb_t mask = ((mpi_limb_t)0) - swap;
+	mpi_limb_t x;
+
+	if (a->alloced > b->alloced)
+		nlimbs = b->alloced;
+	else
+		nlimbs = a->alloced;
+	if (a->nlimbs > nlimbs || b->nlimbs > nlimbs)
+		return;
+
+	for (i = 0; i < nlimbs; i++) {
+		x = mask & (a->d[i] ^ b->d[i]);
+		a->d[i] = a->d[i] ^ x;
+		b->d[i] = b->d[i] ^ x;
+	}
+
+	x = mask & (a->nlimbs ^ b->nlimbs);
+	a->nlimbs = a->nlimbs ^ x;
+	b->nlimbs = b->nlimbs ^ x;
+
+	x = mask & (a->sign ^ b->sign);
+	a->sign = a->sign ^ x;
+	b->sign = b->sign ^ x;
+}
+
+MODULE_DESCRIPTION("Multiprecision maths library");
+MODULE_LICENSE("GPL");