Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 441 insertions, 0 deletions

diff --git a/lib/zlib_deflate/defutil.h b/lib/zlib_deflate/defutil.h
new file mode 100644
index 000000000..385333b22
--- /dev/null
+++ b/lib/zlib_deflate/defutil.h
@@ -0,0 +1,441 @@
+#ifndef DEFUTIL_H
+#define DEFUTIL_H
+
+#include <linux/zutil.h>
+
+#define Assert(err, str) 
+#define Trace(dummy) 
+#define Tracev(dummy) 
+#define Tracecv(err, dummy) 
+#define Tracevv(dummy) 
+
+
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS  256
+/* number of literal bytes 0..255 */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES   30
+/* number of distance codes */
+
+#define BL_CODES  19
+/* number of codes used to transfer the bit lengths */
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define INIT_STATE    42
+#define BUSY_STATE   113
+#define FINISH_STATE 666
+/* Stream status */
+
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data_s {
+    union {
+        ush  freq;       /* frequency count */
+        ush  code;       /* bit string */
+    } fc;
+    union {
+        ush  dad;        /* father node in Huffman tree */
+        ush  len;        /* length of bit string */
+    } dl;
+} ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad  dl.dad
+#define Len  dl.len
+
+typedef struct static_tree_desc_s  static_tree_desc;
+
+typedef struct tree_desc_s {
+    ct_data *dyn_tree;           /* the dynamic tree */
+    int     max_code;            /* largest code with non zero frequency */
+    static_tree_desc *stat_desc; /* the corresponding static tree */
+} tree_desc;
+
+typedef ush Pos;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+typedef struct deflate_state {
+    z_streamp strm;      /* pointer back to this zlib stream */
+    int   status;        /* as the name implies */
+    Byte *pending_buf;   /* output still pending */
+    ulg   pending_buf_size; /* size of pending_buf */
+    Byte *pending_out;   /* next pending byte to output to the stream */
+    int   pending;       /* nb of bytes in the pending buffer */
+    int   noheader;      /* suppress zlib header and adler32 */
+    Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
+    Byte  method;        /* STORED (for zip only) or DEFLATED */
+    int   last_flush;    /* value of flush param for previous deflate call */
+
+                /* used by deflate.c: */
+
+    uInt  w_size;        /* LZ77 window size (32K by default) */
+    uInt  w_bits;        /* log2(w_size)  (8..16) */
+    uInt  w_mask;        /* w_size - 1 */
+
+    Byte *window;
+    /* Sliding window. Input bytes are read into the second half of the window,
+     * and move to the first half later to keep a dictionary of at least wSize
+     * bytes. With this organization, matches are limited to a distance of
+     * wSize-MAX_MATCH bytes, but this ensures that IO is always
+     * performed with a length multiple of the block size. Also, it limits
+     * the window size to 64K, which is quite useful on MSDOS.
+     * To do: use the user input buffer as sliding window.
+     */
+
+    ulg window_size;
+    /* Actual size of window: 2*wSize, except when the user input buffer
+     * is directly used as sliding window.
+     */
+
+    Pos *prev;
+    /* Link to older string with same hash index. To limit the size of this
+     * array to 64K, this link is maintained only for the last 32K strings.
+     * An index in this array is thus a window index modulo 32K.
+     */
+
+    Pos *head; /* Heads of the hash chains or NIL. */
+
+    uInt  ins_h;          /* hash index of string to be inserted */
+    uInt  hash_size;      /* number of elements in hash table */
+    uInt  hash_bits;      /* log2(hash_size) */
+    uInt  hash_mask;      /* hash_size-1 */
+
+    uInt  hash_shift;
+    /* Number of bits by which ins_h must be shifted at each input
+     * step. It must be such that after MIN_MATCH steps, the oldest
+     * byte no longer takes part in the hash key, that is:
+     *   hash_shift * MIN_MATCH >= hash_bits
+     */
+
+    long block_start;
+    /* Window position at the beginning of the current output block. Gets
+     * negative when the window is moved backwards.
+     */
+
+    uInt match_length;           /* length of best match */
+    IPos prev_match;             /* previous match */
+    int match_available;         /* set if previous match exists */
+    uInt strstart;               /* start of string to insert */
+    uInt match_start;            /* start of matching string */
+    uInt lookahead;              /* number of valid bytes ahead in window */
+
+    uInt prev_length;
+    /* Length of the best match at previous step. Matches not greater than this
+     * are discarded. This is used in the lazy match evaluation.
+     */
+
+    uInt max_chain_length;
+    /* To speed up deflation, hash chains are never searched beyond this
+     * length.  A higher limit improves compression ratio but degrades the
+     * speed.
+     */
+
+    uInt max_lazy_match;
+    /* Attempt to find a better match only when the current match is strictly
+     * smaller than this value. This mechanism is used only for compression
+     * levels >= 4.
+     */
+#   define max_insert_length  max_lazy_match
+    /* Insert new strings in the hash table only if the match length is not
+     * greater than this length. This saves time but degrades compression.
+     * max_insert_length is used only for compression levels <= 3.
+     */
+
+    int level;    /* compression level (1..9) */
+    int strategy; /* favor or force Huffman coding*/
+
+    uInt good_match;
+    /* Use a faster search when the previous match is longer than this */
+
+    int nice_match; /* Stop searching when current match exceeds this */
+
+                /* used by trees.c: */
+    /* Didn't use ct_data typedef below to suppress compiler warning */
+    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
+    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
+
+    struct tree_desc_s l_desc;               /* desc. for literal tree */
+    struct tree_desc_s d_desc;               /* desc. for distance tree */
+    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
+
+    ush bl_count[MAX_BITS+1];
+    /* number of codes at each bit length for an optimal tree */
+
+    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
+    int heap_len;               /* number of elements in the heap */
+    int heap_max;               /* element of largest frequency */
+    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+     * The same heap array is used to build all trees.
+     */
+
+    uch depth[2*L_CODES+1];
+    /* Depth of each subtree used as tie breaker for trees of equal frequency
+     */
+
+    uch *l_buf;          /* buffer for literals or lengths */
+
+    uInt  lit_bufsize;
+    /* Size of match buffer for literals/lengths.  There are 4 reasons for
+     * limiting lit_bufsize to 64K:
+     *   - frequencies can be kept in 16 bit counters
+     *   - if compression is not successful for the first block, all input
+     *     data is still in the window so we can still emit a stored block even
+     *     when input comes from standard input.  (This can also be done for
+     *     all blocks if lit_bufsize is not greater than 32K.)
+     *   - if compression is not successful for a file smaller than 64K, we can
+     *     even emit a stored file instead of a stored block (saving 5 bytes).
+     *     This is applicable only for zip (not gzip or zlib).
+     *   - creating new Huffman trees less frequently may not provide fast
+     *     adaptation to changes in the input data statistics. (Take for
+     *     example a binary file with poorly compressible code followed by
+     *     a highly compressible string table.) Smaller buffer sizes give
+     *     fast adaptation but have of course the overhead of transmitting
+     *     trees more frequently.
+     *   - I can't count above 4
+     */
+
+    uInt last_lit;      /* running index in l_buf */
+
+    ush *d_buf;
+    /* Buffer for distances. To simplify the code, d_buf and l_buf have
+     * the same number of elements. To use different lengths, an extra flag
+     * array would be necessary.
+     */
+
+    ulg opt_len;        /* bit length of current block with optimal trees */
+    ulg static_len;     /* bit length of current block with static trees */
+    ulg compressed_len; /* total bit length of compressed file */
+    uInt matches;       /* number of string matches in current block */
+    int last_eob_len;   /* bit length of EOB code for last block */
+
+#ifdef DEBUG_ZLIB
+    ulg bits_sent;      /* bit length of the compressed data */
+#endif
+
+    ush bi_buf;
+    /* Output buffer. bits are inserted starting at the bottom (least
+     * significant bits).
+     */
+    int bi_valid;
+    /* Number of valid bits in bi_buf.  All bits above the last valid bit
+     * are always zero.
+     */
+
+} deflate_state;
+
+#ifdef CONFIG_ZLIB_DFLTCC
+#define zlib_deflate_window_memsize(windowBits) \
+	(2 * (1 << (windowBits)) * sizeof(Byte) + PAGE_SIZE)
+#else
+#define zlib_deflate_window_memsize(windowBits) \
+	(2 * (1 << (windowBits)) * sizeof(Byte))
+#endif
+#define zlib_deflate_prev_memsize(windowBits) \
+	((1 << (windowBits)) * sizeof(Pos))
+#define zlib_deflate_head_memsize(memLevel) \
+	((1 << ((memLevel)+7)) * sizeof(Pos))
+#define zlib_deflate_overlay_memsize(memLevel) \
+	((1 << ((memLevel)+6)) * (sizeof(ush)+2))
+
+/* Output a byte on the stream.
+ * IN assertion: there is enough room in pending_buf.
+ */
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+        /* in trees.c */
+void zlib_tr_init         (deflate_state *s);
+int  zlib_tr_tally        (deflate_state *s, unsigned dist, unsigned lc);
+ulg  zlib_tr_flush_block  (deflate_state *s, char *buf, ulg stored_len,
+			   int eof);
+void zlib_tr_align        (deflate_state *s);
+void zlib_tr_stored_block (deflate_state *s, char *buf, ulg stored_len,
+			   int eof);
+void zlib_tr_stored_type_only (deflate_state *);
+
+
+/* ===========================================================================
+ * Output a short LSB first on the stream.
+ * IN assertion: there is enough room in pendingBuf.
+ */
+#define put_short(s, w) { \
+    put_byte(s, (uch)((w) & 0xff)); \
+    put_byte(s, (uch)((ush)(w) >> 8)); \
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+static inline unsigned  bi_reverse(
+    unsigned code, /* the value to invert */
+    int len        /* its bit length */
+)
+{
+    register unsigned res = 0;
+    do {
+        res |= code & 1;
+        code >>= 1, res <<= 1;
+    } while (--len > 0);
+    return res >> 1;
+}
+
+/* ===========================================================================
+ * Flush the bit buffer, keeping at most 7 bits in it.
+ */
+static inline void bi_flush(deflate_state *s)
+{
+    if (s->bi_valid == 16) {
+        put_short(s, s->bi_buf);
+        s->bi_buf = 0;
+        s->bi_valid = 0;
+    } else if (s->bi_valid >= 8) {
+        put_byte(s, (Byte)s->bi_buf);
+        s->bi_buf >>= 8;
+        s->bi_valid -= 8;
+    }
+}
+
+/* ===========================================================================
+ * Flush the bit buffer and align the output on a byte boundary
+ */
+static inline void bi_windup(deflate_state *s)
+{
+    if (s->bi_valid > 8) {
+        put_short(s, s->bi_buf);
+    } else if (s->bi_valid > 0) {
+        put_byte(s, (Byte)s->bi_buf);
+    }
+    s->bi_buf = 0;
+    s->bi_valid = 0;
+#ifdef DEBUG_ZLIB
+    s->bits_sent = (s->bits_sent+7) & ~7;
+#endif
+}
+
+typedef enum {
+    need_more,      /* block not completed, need more input or more output */
+    block_done,     /* block flush performed */
+    finish_started, /* finish started, need only more output at next deflate */
+    finish_done     /* finish done, accept no more input or output */
+} block_state;
+
+#define Buf_size (8 * 2*sizeof(char))
+/* Number of bits used within bi_buf. (bi_buf might be implemented on
+ * more than 16 bits on some systems.)
+ */
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+#ifdef DEBUG_ZLIB
+static void send_bits      (deflate_state *s, int value, int length);
+
+static void send_bits(
+    deflate_state *s,
+    int value,  /* value to send */
+    int length  /* number of bits */
+)
+{
+    Tracevv((stderr," l %2d v %4x ", length, value));
+    Assert(length > 0 && length <= 15, "invalid length");
+    s->bits_sent += (ulg)length;
+
+    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+     * unused bits in value.
+     */
+    if (s->bi_valid > (int)Buf_size - length) {
+        s->bi_buf |= (value << s->bi_valid);
+        put_short(s, s->bi_buf);
+        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
+        s->bi_valid += length - Buf_size;
+    } else {
+        s->bi_buf |= value << s->bi_valid;
+        s->bi_valid += length;
+    }
+}
+#else /* !DEBUG_ZLIB */
+
+#define send_bits(s, value, length) \
+{ int len = length;\
+  if (s->bi_valid > (int)Buf_size - len) {\
+    int val = value;\
+    s->bi_buf |= (val << s->bi_valid);\
+    put_short(s, s->bi_buf);\
+    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
+    s->bi_valid += len - Buf_size;\
+  } else {\
+    s->bi_buf |= (value) << s->bi_valid;\
+    s->bi_valid += len;\
+  }\
+}
+#endif /* DEBUG_ZLIB */
+
+static inline void zlib_tr_send_bits(
+    deflate_state *s,
+    int value,
+    int length
+)
+{
+    send_bits(s, value, length);
+}
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+static inline void flush_pending(
+	z_streamp strm
+)
+{
+    deflate_state *s = (deflate_state *) strm->state;
+    unsigned len = s->pending;
+
+    if (len > strm->avail_out) len = strm->avail_out;
+    if (len == 0) return;
+
+    if (strm->next_out != NULL) {
+	memcpy(strm->next_out, s->pending_out, len);
+	strm->next_out += len;
+    }
+    s->pending_out += len;
+    strm->total_out += len;
+    strm->avail_out  -= len;
+    s->pending -= len;
+    if (s->pending == 0) {
+        s->pending_out = s->pending_buf;
+    }
+}
+#endif /* DEFUTIL_H */