Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 314 insertions, 0 deletions

diff --git a/mm/damon/vaddr-test.h b/mm/damon/vaddr-test.h
new file mode 100644
index 000000000..bce37c487
--- /dev/null
+++ b/mm/damon/vaddr-test.h
@@ -0,0 +1,314 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Data Access Monitor Unit Tests
+ *
+ * Copyright 2019 Amazon.com, Inc. or its affiliates.  All rights reserved.
+ *
+ * Author: SeongJae Park <sjpark@amazon.de>
+ */
+
+#ifdef CONFIG_DAMON_VADDR_KUNIT_TEST
+
+#ifndef _DAMON_VADDR_TEST_H
+#define _DAMON_VADDR_TEST_H
+
+#include <kunit/test.h>
+
+static void __link_vmas(struct maple_tree *mt, struct vm_area_struct *vmas,
+			ssize_t nr_vmas)
+{
+	int i;
+	MA_STATE(mas, mt, 0, 0);
+
+	if (!nr_vmas)
+		return;
+
+	mas_lock(&mas);
+	for (i = 0; i < nr_vmas; i++)
+		vma_mas_store(&vmas[i], &mas);
+	mas_unlock(&mas);
+}
+
+/*
+ * Test __damon_va_three_regions() function
+ *
+ * In case of virtual memory address spaces monitoring, DAMON converts the
+ * complex and dynamic memory mappings of each target task to three
+ * discontiguous regions which cover every mapped areas.  However, the three
+ * regions should not include the two biggest unmapped areas in the original
+ * mapping, because the two biggest areas are normally the areas between 1)
+ * heap and the mmap()-ed regions, and 2) the mmap()-ed regions and stack.
+ * Because these two unmapped areas are very huge but obviously never accessed,
+ * covering the region is just a waste.
+ *
+ * '__damon_va_three_regions() receives an address space of a process.  It
+ * first identifies the start of mappings, end of mappings, and the two biggest
+ * unmapped areas.  After that, based on the information, it constructs the
+ * three regions and returns.  For more detail, refer to the comment of
+ * 'damon_init_regions_of()' function definition in 'mm/damon.c' file.
+ *
+ * For example, suppose virtual address ranges of 10-20, 20-25, 200-210,
+ * 210-220, 300-305, and 307-330 (Other comments represent this mappings in
+ * more short form: 10-20-25, 200-210-220, 300-305, 307-330) of a process are
+ * mapped.  To cover every mappings, the three regions should start with 10,
+ * and end with 305.  The process also has three unmapped areas, 25-200,
+ * 220-300, and 305-307.  Among those, 25-200 and 220-300 are the biggest two
+ * unmapped areas, and thus it should be converted to three regions of 10-25,
+ * 200-220, and 300-330.
+ */
+static void damon_test_three_regions_in_vmas(struct kunit *test)
+{
+	static struct mm_struct mm;
+	struct damon_addr_range regions[3] = {0,};
+	/* 10-20-25, 200-210-220, 300-305, 307-330 */
+	struct vm_area_struct vmas[] = {
+		(struct vm_area_struct) {.vm_start = 10, .vm_end = 20},
+		(struct vm_area_struct) {.vm_start = 20, .vm_end = 25},
+		(struct vm_area_struct) {.vm_start = 200, .vm_end = 210},
+		(struct vm_area_struct) {.vm_start = 210, .vm_end = 220},
+		(struct vm_area_struct) {.vm_start = 300, .vm_end = 305},
+		(struct vm_area_struct) {.vm_start = 307, .vm_end = 330},
+	};
+
+	mt_init_flags(&mm.mm_mt, MM_MT_FLAGS);
+	__link_vmas(&mm.mm_mt, vmas, ARRAY_SIZE(vmas));
+
+	__damon_va_three_regions(&mm, regions);
+
+	KUNIT_EXPECT_EQ(test, 10ul, regions[0].start);
+	KUNIT_EXPECT_EQ(test, 25ul, regions[0].end);
+	KUNIT_EXPECT_EQ(test, 200ul, regions[1].start);
+	KUNIT_EXPECT_EQ(test, 220ul, regions[1].end);
+	KUNIT_EXPECT_EQ(test, 300ul, regions[2].start);
+	KUNIT_EXPECT_EQ(test, 330ul, regions[2].end);
+}
+
+static struct damon_region *__nth_region_of(struct damon_target *t, int idx)
+{
+	struct damon_region *r;
+	unsigned int i = 0;
+
+	damon_for_each_region(r, t) {
+		if (i++ == idx)
+			return r;
+	}
+
+	return NULL;
+}
+
+/*
+ * Test 'damon_set_regions()'
+ *
+ * test			kunit object
+ * regions		an array containing start/end addresses of current
+ *			monitoring target regions
+ * nr_regions		the number of the addresses in 'regions'
+ * three_regions	The three regions that need to be applied now
+ * expected		start/end addresses of monitoring target regions that
+ *			'three_regions' are applied
+ * nr_expected		the number of addresses in 'expected'
+ *
+ * The memory mapping of the target processes changes dynamically.  To follow
+ * the change, DAMON periodically reads the mappings, simplifies it to the
+ * three regions, and updates the monitoring target regions to fit in the three
+ * regions.  The update of current target regions is the role of
+ * 'damon_set_regions()'.
+ *
+ * This test passes the given target regions and the new three regions that
+ * need to be applied to the function and check whether it updates the regions
+ * as expected.
+ */
+static void damon_do_test_apply_three_regions(struct kunit *test,
+				unsigned long *regions, int nr_regions,
+				struct damon_addr_range *three_regions,
+				unsigned long *expected, int nr_expected)
+{
+	struct damon_target *t;
+	struct damon_region *r;
+	int i;
+
+	t = damon_new_target();
+	for (i = 0; i < nr_regions / 2; i++) {
+		r = damon_new_region(regions[i * 2], regions[i * 2 + 1]);
+		damon_add_region(r, t);
+	}
+
+	damon_set_regions(t, three_regions, 3);
+
+	for (i = 0; i < nr_expected / 2; i++) {
+		r = __nth_region_of(t, i);
+		KUNIT_EXPECT_EQ(test, r->ar.start, expected[i * 2]);
+		KUNIT_EXPECT_EQ(test, r->ar.end, expected[i * 2 + 1]);
+	}
+}
+
+/*
+ * This function test most common case where the three big regions are only
+ * slightly changed.  Target regions should adjust their boundary (10-20-30,
+ * 50-55, 70-80, 90-100) to fit with the new big regions or remove target
+ * regions (57-79) that now out of the three regions.
+ */
+static void damon_test_apply_three_regions1(struct kunit *test)
+{
+	/* 10-20-30, 50-55-57-59, 70-80-90-100 */
+	unsigned long regions[] = {10, 20, 20, 30, 50, 55, 55, 57, 57, 59,
+				70, 80, 80, 90, 90, 100};
+	/* 5-27, 45-55, 73-104 */
+	struct damon_addr_range new_three_regions[3] = {
+		(struct damon_addr_range){.start = 5, .end = 27},
+		(struct damon_addr_range){.start = 45, .end = 55},
+		(struct damon_addr_range){.start = 73, .end = 104} };
+	/* 5-20-27, 45-55, 73-80-90-104 */
+	unsigned long expected[] = {5, 20, 20, 27, 45, 55,
+				73, 80, 80, 90, 90, 104};
+
+	damon_do_test_apply_three_regions(test, regions, ARRAY_SIZE(regions),
+			new_three_regions, expected, ARRAY_SIZE(expected));
+}
+
+/*
+ * Test slightly bigger change.  Similar to above, but the second big region
+ * now require two target regions (50-55, 57-59) to be removed.
+ */
+static void damon_test_apply_three_regions2(struct kunit *test)
+{
+	/* 10-20-30, 50-55-57-59, 70-80-90-100 */
+	unsigned long regions[] = {10, 20, 20, 30, 50, 55, 55, 57, 57, 59,
+				70, 80, 80, 90, 90, 100};
+	/* 5-27, 56-57, 65-104 */
+	struct damon_addr_range new_three_regions[3] = {
+		(struct damon_addr_range){.start = 5, .end = 27},
+		(struct damon_addr_range){.start = 56, .end = 57},
+		(struct damon_addr_range){.start = 65, .end = 104} };
+	/* 5-20-27, 56-57, 65-80-90-104 */
+	unsigned long expected[] = {5, 20, 20, 27, 56, 57,
+				65, 80, 80, 90, 90, 104};
+
+	damon_do_test_apply_three_regions(test, regions, ARRAY_SIZE(regions),
+			new_three_regions, expected, ARRAY_SIZE(expected));
+}
+
+/*
+ * Test a big change.  The second big region has totally freed and mapped to
+ * different area (50-59 -> 61-63).  The target regions which were in the old
+ * second big region (50-55-57-59) should be removed and new target region
+ * covering the second big region (61-63) should be created.
+ */
+static void damon_test_apply_three_regions3(struct kunit *test)
+{
+	/* 10-20-30, 50-55-57-59, 70-80-90-100 */
+	unsigned long regions[] = {10, 20, 20, 30, 50, 55, 55, 57, 57, 59,
+				70, 80, 80, 90, 90, 100};
+	/* 5-27, 61-63, 65-104 */
+	struct damon_addr_range new_three_regions[3] = {
+		(struct damon_addr_range){.start = 5, .end = 27},
+		(struct damon_addr_range){.start = 61, .end = 63},
+		(struct damon_addr_range){.start = 65, .end = 104} };
+	/* 5-20-27, 61-63, 65-80-90-104 */
+	unsigned long expected[] = {5, 20, 20, 27, 61, 63,
+				65, 80, 80, 90, 90, 104};
+
+	damon_do_test_apply_three_regions(test, regions, ARRAY_SIZE(regions),
+			new_three_regions, expected, ARRAY_SIZE(expected));
+}
+
+/*
+ * Test another big change.  Both of the second and third big regions (50-59
+ * and 70-100) has totally freed and mapped to different area (30-32 and
+ * 65-68).  The target regions which were in the old second and third big
+ * regions should now be removed and new target regions covering the new second
+ * and third big regions should be created.
+ */
+static void damon_test_apply_three_regions4(struct kunit *test)
+{
+	/* 10-20-30, 50-55-57-59, 70-80-90-100 */
+	unsigned long regions[] = {10, 20, 20, 30, 50, 55, 55, 57, 57, 59,
+				70, 80, 80, 90, 90, 100};
+	/* 5-7, 30-32, 65-68 */
+	struct damon_addr_range new_three_regions[3] = {
+		(struct damon_addr_range){.start = 5, .end = 7},
+		(struct damon_addr_range){.start = 30, .end = 32},
+		(struct damon_addr_range){.start = 65, .end = 68} };
+	/* expect 5-7, 30-32, 65-68 */
+	unsigned long expected[] = {5, 7, 30, 32, 65, 68};
+
+	damon_do_test_apply_three_regions(test, regions, ARRAY_SIZE(regions),
+			new_three_regions, expected, ARRAY_SIZE(expected));
+}
+
+static void damon_test_split_evenly_fail(struct kunit *test,
+		unsigned long start, unsigned long end, unsigned int nr_pieces)
+{
+	struct damon_target *t = damon_new_target();
+	struct damon_region *r = damon_new_region(start, end);
+
+	damon_add_region(r, t);
+	KUNIT_EXPECT_EQ(test,
+			damon_va_evenly_split_region(t, r, nr_pieces), -EINVAL);
+	KUNIT_EXPECT_EQ(test, damon_nr_regions(t), 1u);
+
+	damon_for_each_region(r, t) {
+		KUNIT_EXPECT_EQ(test, r->ar.start, start);
+		KUNIT_EXPECT_EQ(test, r->ar.end, end);
+	}
+
+	damon_free_target(t);
+}
+
+static void damon_test_split_evenly_succ(struct kunit *test,
+	unsigned long start, unsigned long end, unsigned int nr_pieces)
+{
+	struct damon_target *t = damon_new_target();
+	struct damon_region *r = damon_new_region(start, end);
+	unsigned long expected_width = (end - start) / nr_pieces;
+	unsigned long i = 0;
+
+	damon_add_region(r, t);
+	KUNIT_EXPECT_EQ(test,
+			damon_va_evenly_split_region(t, r, nr_pieces), 0);
+	KUNIT_EXPECT_EQ(test, damon_nr_regions(t), nr_pieces);
+
+	damon_for_each_region(r, t) {
+		if (i == nr_pieces - 1) {
+			KUNIT_EXPECT_EQ(test,
+				r->ar.start, start + i * expected_width);
+			KUNIT_EXPECT_EQ(test, r->ar.end, end);
+			break;
+		}
+		KUNIT_EXPECT_EQ(test,
+				r->ar.start, start + i++ * expected_width);
+		KUNIT_EXPECT_EQ(test, r->ar.end, start + i * expected_width);
+	}
+	damon_free_target(t);
+}
+
+static void damon_test_split_evenly(struct kunit *test)
+{
+	KUNIT_EXPECT_EQ(test, damon_va_evenly_split_region(NULL, NULL, 5),
+			-EINVAL);
+
+	damon_test_split_evenly_fail(test, 0, 100, 0);
+	damon_test_split_evenly_succ(test, 0, 100, 10);
+	damon_test_split_evenly_succ(test, 5, 59, 5);
+	damon_test_split_evenly_fail(test, 5, 6, 2);
+}
+
+static struct kunit_case damon_test_cases[] = {
+	KUNIT_CASE(damon_test_three_regions_in_vmas),
+	KUNIT_CASE(damon_test_apply_three_regions1),
+	KUNIT_CASE(damon_test_apply_three_regions2),
+	KUNIT_CASE(damon_test_apply_three_regions3),
+	KUNIT_CASE(damon_test_apply_three_regions4),
+	KUNIT_CASE(damon_test_split_evenly),
+	{},
+};
+
+static struct kunit_suite damon_test_suite = {
+	.name = "damon-operations",
+	.test_cases = damon_test_cases,
+};
+kunit_test_suite(damon_test_suite);
+
+#endif /* _DAMON_VADDR_TEST_H */
+
+#endif	/* CONFIG_DAMON_VADDR_KUNIT_TEST */