Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 636 insertions, 0 deletions

diff --git a/mm/kasan/shadow.c b/mm/kasan/shadow.c
new file mode 100644
index 000000000..3703983a8
--- /dev/null
+++ b/mm/kasan/shadow.c
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file contains KASAN runtime code that manages shadow memory for
+ * generic and software tag-based KASAN modes.
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin <ryabinin.a.a@gmail.com>
+ *
+ * Some code borrowed from https://github.com/xairy/kasan-prototype by
+ *        Andrey Konovalov <andreyknvl@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/kfence.h>
+#include <linux/kmemleak.h>
+#include <linux/memory.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#include "kasan.h"
+
+bool __kasan_check_read(const volatile void *p, unsigned int size)
+{
+	return kasan_check_range((unsigned long)p, size, false, _RET_IP_);
+}
+EXPORT_SYMBOL(__kasan_check_read);
+
+bool __kasan_check_write(const volatile void *p, unsigned int size)
+{
+	return kasan_check_range((unsigned long)p, size, true, _RET_IP_);
+}
+EXPORT_SYMBOL(__kasan_check_write);
+
+#ifndef CONFIG_GENERIC_ENTRY
+/*
+ * CONFIG_GENERIC_ENTRY relies on compiler emitted mem*() calls to not be
+ * instrumented. KASAN enabled toolchains should emit __asan_mem*() functions
+ * for the sites they want to instrument.
+ */
+#undef memset
+void *memset(void *addr, int c, size_t len)
+{
+	if (!kasan_check_range((unsigned long)addr, len, true, _RET_IP_))
+		return NULL;
+
+	return __memset(addr, c, len);
+}
+
+#ifdef __HAVE_ARCH_MEMMOVE
+#undef memmove
+void *memmove(void *dest, const void *src, size_t len)
+{
+	if (!kasan_check_range((unsigned long)src, len, false, _RET_IP_) ||
+	    !kasan_check_range((unsigned long)dest, len, true, _RET_IP_))
+		return NULL;
+
+	return __memmove(dest, src, len);
+}
+#endif
+
+#undef memcpy
+void *memcpy(void *dest, const void *src, size_t len)
+{
+	if (!kasan_check_range((unsigned long)src, len, false, _RET_IP_) ||
+	    !kasan_check_range((unsigned long)dest, len, true, _RET_IP_))
+		return NULL;
+
+	return __memcpy(dest, src, len);
+}
+#endif
+
+void *__asan_memset(void *addr, int c, size_t len)
+{
+	if (!kasan_check_range((unsigned long)addr, len, true, _RET_IP_))
+		return NULL;
+
+	return __memset(addr, c, len);
+}
+EXPORT_SYMBOL(__asan_memset);
+
+#ifdef __HAVE_ARCH_MEMMOVE
+void *__asan_memmove(void *dest, const void *src, size_t len)
+{
+	if (!kasan_check_range((unsigned long)src, len, false, _RET_IP_) ||
+	    !kasan_check_range((unsigned long)dest, len, true, _RET_IP_))
+		return NULL;
+
+	return __memmove(dest, src, len);
+}
+EXPORT_SYMBOL(__asan_memmove);
+#endif
+
+void *__asan_memcpy(void *dest, const void *src, size_t len)
+{
+	if (!kasan_check_range((unsigned long)src, len, false, _RET_IP_) ||
+	    !kasan_check_range((unsigned long)dest, len, true, _RET_IP_))
+		return NULL;
+
+	return __memcpy(dest, src, len);
+}
+EXPORT_SYMBOL(__asan_memcpy);
+
+void kasan_poison(const void *addr, size_t size, u8 value, bool init)
+{
+	void *shadow_start, *shadow_end;
+
+	if (!kasan_arch_is_ready())
+		return;
+
+	/*
+	 * Perform shadow offset calculation based on untagged address, as
+	 * some of the callers (e.g. kasan_poison_object_data) pass tagged
+	 * addresses to this function.
+	 */
+	addr = kasan_reset_tag(addr);
+
+	/* Skip KFENCE memory if called explicitly outside of sl*b. */
+	if (is_kfence_address(addr))
+		return;
+
+	if (WARN_ON((unsigned long)addr & KASAN_GRANULE_MASK))
+		return;
+	if (WARN_ON(size & KASAN_GRANULE_MASK))
+		return;
+
+	shadow_start = kasan_mem_to_shadow(addr);
+	shadow_end = kasan_mem_to_shadow(addr + size);
+
+	__memset(shadow_start, value, shadow_end - shadow_start);
+}
+EXPORT_SYMBOL(kasan_poison);
+
+#ifdef CONFIG_KASAN_GENERIC
+void kasan_poison_last_granule(const void *addr, size_t size)
+{
+	if (!kasan_arch_is_ready())
+		return;
+
+	if (size & KASAN_GRANULE_MASK) {
+		u8 *shadow = (u8 *)kasan_mem_to_shadow(addr + size);
+		*shadow = size & KASAN_GRANULE_MASK;
+	}
+}
+#endif
+
+void kasan_unpoison(const void *addr, size_t size, bool init)
+{
+	u8 tag = get_tag(addr);
+
+	/*
+	 * Perform shadow offset calculation based on untagged address, as
+	 * some of the callers (e.g. kasan_unpoison_object_data) pass tagged
+	 * addresses to this function.
+	 */
+	addr = kasan_reset_tag(addr);
+
+	/*
+	 * Skip KFENCE memory if called explicitly outside of sl*b. Also note
+	 * that calls to ksize(), where size is not a multiple of machine-word
+	 * size, would otherwise poison the invalid portion of the word.
+	 */
+	if (is_kfence_address(addr))
+		return;
+
+	if (WARN_ON((unsigned long)addr & KASAN_GRANULE_MASK))
+		return;
+
+	/* Unpoison all granules that cover the object. */
+	kasan_poison(addr, round_up(size, KASAN_GRANULE_SIZE), tag, false);
+
+	/* Partially poison the last granule for the generic mode. */
+	if (IS_ENABLED(CONFIG_KASAN_GENERIC))
+		kasan_poison_last_granule(addr, size);
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static bool shadow_mapped(unsigned long addr)
+{
+	pgd_t *pgd = pgd_offset_k(addr);
+	p4d_t *p4d;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	if (pgd_none(*pgd))
+		return false;
+	p4d = p4d_offset(pgd, addr);
+	if (p4d_none(*p4d))
+		return false;
+	pud = pud_offset(p4d, addr);
+	if (pud_none(*pud))
+		return false;
+
+	/*
+	 * We can't use pud_large() or pud_huge(), the first one is
+	 * arch-specific, the last one depends on HUGETLB_PAGE.  So let's abuse
+	 * pud_bad(), if pud is bad then it's bad because it's huge.
+	 */
+	if (pud_bad(*pud))
+		return true;
+	pmd = pmd_offset(pud, addr);
+	if (pmd_none(*pmd))
+		return false;
+
+	if (pmd_bad(*pmd))
+		return true;
+	pte = pte_offset_kernel(pmd, addr);
+	return !pte_none(*pte);
+}
+
+static int __meminit kasan_mem_notifier(struct notifier_block *nb,
+			unsigned long action, void *data)
+{
+	struct memory_notify *mem_data = data;
+	unsigned long nr_shadow_pages, start_kaddr, shadow_start;
+	unsigned long shadow_end, shadow_size;
+
+	nr_shadow_pages = mem_data->nr_pages >> KASAN_SHADOW_SCALE_SHIFT;
+	start_kaddr = (unsigned long)pfn_to_kaddr(mem_data->start_pfn);
+	shadow_start = (unsigned long)kasan_mem_to_shadow((void *)start_kaddr);
+	shadow_size = nr_shadow_pages << PAGE_SHIFT;
+	shadow_end = shadow_start + shadow_size;
+
+	if (WARN_ON(mem_data->nr_pages % KASAN_GRANULE_SIZE) ||
+		WARN_ON(start_kaddr % KASAN_MEMORY_PER_SHADOW_PAGE))
+		return NOTIFY_BAD;
+
+	switch (action) {
+	case MEM_GOING_ONLINE: {
+		void *ret;
+
+		/*
+		 * If shadow is mapped already than it must have been mapped
+		 * during the boot. This could happen if we onlining previously
+		 * offlined memory.
+		 */
+		if (shadow_mapped(shadow_start))
+			return NOTIFY_OK;
+
+		ret = __vmalloc_node_range(shadow_size, PAGE_SIZE, shadow_start,
+					shadow_end, GFP_KERNEL,
+					PAGE_KERNEL, VM_NO_GUARD,
+					pfn_to_nid(mem_data->start_pfn),
+					__builtin_return_address(0));
+		if (!ret)
+			return NOTIFY_BAD;
+
+		kmemleak_ignore(ret);
+		return NOTIFY_OK;
+	}
+	case MEM_CANCEL_ONLINE:
+	case MEM_OFFLINE: {
+		struct vm_struct *vm;
+
+		/*
+		 * shadow_start was either mapped during boot by kasan_init()
+		 * or during memory online by __vmalloc_node_range().
+		 * In the latter case we can use vfree() to free shadow.
+		 * Non-NULL result of the find_vm_area() will tell us if
+		 * that was the second case.
+		 *
+		 * Currently it's not possible to free shadow mapped
+		 * during boot by kasan_init(). It's because the code
+		 * to do that hasn't been written yet. So we'll just
+		 * leak the memory.
+		 */
+		vm = find_vm_area((void *)shadow_start);
+		if (vm)
+			vfree((void *)shadow_start);
+	}
+	}
+
+	return NOTIFY_OK;
+}
+
+static int __init kasan_memhotplug_init(void)
+{
+	hotplug_memory_notifier(kasan_mem_notifier, DEFAULT_CALLBACK_PRI);
+
+	return 0;
+}
+
+core_initcall(kasan_memhotplug_init);
+#endif
+
+#ifdef CONFIG_KASAN_VMALLOC
+
+void __init __weak kasan_populate_early_vm_area_shadow(void *start,
+						       unsigned long size)
+{
+}
+
+static int kasan_populate_vmalloc_pte(pte_t *ptep, unsigned long addr,
+				      void *unused)
+{
+	unsigned long page;
+	pte_t pte;
+
+	if (likely(!pte_none(*ptep)))
+		return 0;
+
+	page = __get_free_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	memset((void *)page, KASAN_VMALLOC_INVALID, PAGE_SIZE);
+	pte = pfn_pte(PFN_DOWN(__pa(page)), PAGE_KERNEL);
+
+	spin_lock(&init_mm.page_table_lock);
+	if (likely(pte_none(*ptep))) {
+		set_pte_at(&init_mm, addr, ptep, pte);
+		page = 0;
+	}
+	spin_unlock(&init_mm.page_table_lock);
+	if (page)
+		free_page(page);
+	return 0;
+}
+
+int kasan_populate_vmalloc(unsigned long addr, unsigned long size)
+{
+	unsigned long shadow_start, shadow_end;
+	int ret;
+
+	if (!kasan_arch_is_ready())
+		return 0;
+
+	if (!is_vmalloc_or_module_addr((void *)addr))
+		return 0;
+
+	shadow_start = (unsigned long)kasan_mem_to_shadow((void *)addr);
+	shadow_end = (unsigned long)kasan_mem_to_shadow((void *)addr + size);
+
+	/*
+	 * User Mode Linux maps enough shadow memory for all of virtual memory
+	 * at boot, so doesn't need to allocate more on vmalloc, just clear it.
+	 *
+	 * The remaining CONFIG_UML checks in this file exist for the same
+	 * reason.
+	 */
+	if (IS_ENABLED(CONFIG_UML)) {
+		__memset((void *)shadow_start, KASAN_VMALLOC_INVALID, shadow_end - shadow_start);
+		return 0;
+	}
+
+	shadow_start = PAGE_ALIGN_DOWN(shadow_start);
+	shadow_end = PAGE_ALIGN(shadow_end);
+
+	ret = apply_to_page_range(&init_mm, shadow_start,
+				  shadow_end - shadow_start,
+				  kasan_populate_vmalloc_pte, NULL);
+	if (ret)
+		return ret;
+
+	flush_cache_vmap(shadow_start, shadow_end);
+
+	/*
+	 * We need to be careful about inter-cpu effects here. Consider:
+	 *
+	 *   CPU#0				  CPU#1
+	 * WRITE_ONCE(p, vmalloc(100));		while (x = READ_ONCE(p)) ;
+	 *					p[99] = 1;
+	 *
+	 * With compiler instrumentation, that ends up looking like this:
+	 *
+	 *   CPU#0				  CPU#1
+	 * // vmalloc() allocates memory
+	 * // let a = area->addr
+	 * // we reach kasan_populate_vmalloc
+	 * // and call kasan_unpoison:
+	 * STORE shadow(a), unpoison_val
+	 * ...
+	 * STORE shadow(a+99), unpoison_val	x = LOAD p
+	 * // rest of vmalloc process		<data dependency>
+	 * STORE p, a				LOAD shadow(x+99)
+	 *
+	 * If there is no barrier between the end of unpoisoning the shadow
+	 * and the store of the result to p, the stores could be committed
+	 * in a different order by CPU#0, and CPU#1 could erroneously observe
+	 * poison in the shadow.
+	 *
+	 * We need some sort of barrier between the stores.
+	 *
+	 * In the vmalloc() case, this is provided by a smp_wmb() in
+	 * clear_vm_uninitialized_flag(). In the per-cpu allocator and in
+	 * get_vm_area() and friends, the caller gets shadow allocated but
+	 * doesn't have any pages mapped into the virtual address space that
+	 * has been reserved. Mapping those pages in will involve taking and
+	 * releasing a page-table lock, which will provide the barrier.
+	 */
+
+	return 0;
+}
+
+static int kasan_depopulate_vmalloc_pte(pte_t *ptep, unsigned long addr,
+					void *unused)
+{
+	unsigned long page;
+
+	page = (unsigned long)__va(pte_pfn(*ptep) << PAGE_SHIFT);
+
+	spin_lock(&init_mm.page_table_lock);
+
+	if (likely(!pte_none(*ptep))) {
+		pte_clear(&init_mm, addr, ptep);
+		free_page(page);
+	}
+	spin_unlock(&init_mm.page_table_lock);
+
+	return 0;
+}
+
+/*
+ * Release the backing for the vmalloc region [start, end), which
+ * lies within the free region [free_region_start, free_region_end).
+ *
+ * This can be run lazily, long after the region was freed. It runs
+ * under vmap_area_lock, so it's not safe to interact with the vmalloc/vmap
+ * infrastructure.
+ *
+ * How does this work?
+ * -------------------
+ *
+ * We have a region that is page aligned, labeled as A.
+ * That might not map onto the shadow in a way that is page-aligned:
+ *
+ *                    start                     end
+ *                    v                         v
+ * |????????|????????|AAAAAAAA|AA....AA|AAAAAAAA|????????| < vmalloc
+ *  -------- -------- --------          -------- --------
+ *      |        |       |                 |        |
+ *      |        |       |         /-------/        |
+ *      \-------\|/------/         |/---------------/
+ *              |||                ||
+ *             |??AAAAAA|AAAAAAAA|AA??????|                < shadow
+ *                 (1)      (2)      (3)
+ *
+ * First we align the start upwards and the end downwards, so that the
+ * shadow of the region aligns with shadow page boundaries. In the
+ * example, this gives us the shadow page (2). This is the shadow entirely
+ * covered by this allocation.
+ *
+ * Then we have the tricky bits. We want to know if we can free the
+ * partially covered shadow pages - (1) and (3) in the example. For this,
+ * we are given the start and end of the free region that contains this
+ * allocation. Extending our previous example, we could have:
+ *
+ *  free_region_start                                    free_region_end
+ *  |                 start                     end      |
+ *  v                 v                         v        v
+ * |FFFFFFFF|FFFFFFFF|AAAAAAAA|AA....AA|AAAAAAAA|FFFFFFFF| < vmalloc
+ *  -------- -------- --------          -------- --------
+ *      |        |       |                 |        |
+ *      |        |       |         /-------/        |
+ *      \-------\|/------/         |/---------------/
+ *              |||                ||
+ *             |FFAAAAAA|AAAAAAAA|AAF?????|                < shadow
+ *                 (1)      (2)      (3)
+ *
+ * Once again, we align the start of the free region up, and the end of
+ * the free region down so that the shadow is page aligned. So we can free
+ * page (1) - we know no allocation currently uses anything in that page,
+ * because all of it is in the vmalloc free region. But we cannot free
+ * page (3), because we can't be sure that the rest of it is unused.
+ *
+ * We only consider pages that contain part of the original region for
+ * freeing: we don't try to free other pages from the free region or we'd
+ * end up trying to free huge chunks of virtual address space.
+ *
+ * Concurrency
+ * -----------
+ *
+ * How do we know that we're not freeing a page that is simultaneously
+ * being used for a fresh allocation in kasan_populate_vmalloc(_pte)?
+ *
+ * We _can_ have kasan_release_vmalloc and kasan_populate_vmalloc running
+ * at the same time. While we run under free_vmap_area_lock, the population
+ * code does not.
+ *
+ * free_vmap_area_lock instead operates to ensure that the larger range
+ * [free_region_start, free_region_end) is safe: because __alloc_vmap_area and
+ * the per-cpu region-finding algorithm both run under free_vmap_area_lock,
+ * no space identified as free will become used while we are running. This
+ * means that so long as we are careful with alignment and only free shadow
+ * pages entirely covered by the free region, we will not run in to any
+ * trouble - any simultaneous allocations will be for disjoint regions.
+ */
+void kasan_release_vmalloc(unsigned long start, unsigned long end,
+			   unsigned long free_region_start,
+			   unsigned long free_region_end)
+{
+	void *shadow_start, *shadow_end;
+	unsigned long region_start, region_end;
+	unsigned long size;
+
+	if (!kasan_arch_is_ready())
+		return;
+
+	region_start = ALIGN(start, KASAN_MEMORY_PER_SHADOW_PAGE);
+	region_end = ALIGN_DOWN(end, KASAN_MEMORY_PER_SHADOW_PAGE);
+
+	free_region_start = ALIGN(free_region_start, KASAN_MEMORY_PER_SHADOW_PAGE);
+
+	if (start != region_start &&
+	    free_region_start < region_start)
+		region_start -= KASAN_MEMORY_PER_SHADOW_PAGE;
+
+	free_region_end = ALIGN_DOWN(free_region_end, KASAN_MEMORY_PER_SHADOW_PAGE);
+
+	if (end != region_end &&
+	    free_region_end > region_end)
+		region_end += KASAN_MEMORY_PER_SHADOW_PAGE;
+
+	shadow_start = kasan_mem_to_shadow((void *)region_start);
+	shadow_end = kasan_mem_to_shadow((void *)region_end);
+
+	if (shadow_end > shadow_start) {
+		size = shadow_end - shadow_start;
+		if (IS_ENABLED(CONFIG_UML)) {
+			__memset(shadow_start, KASAN_SHADOW_INIT, shadow_end - shadow_start);
+			return;
+		}
+		apply_to_existing_page_range(&init_mm,
+					     (unsigned long)shadow_start,
+					     size, kasan_depopulate_vmalloc_pte,
+					     NULL);
+		flush_tlb_kernel_range((unsigned long)shadow_start,
+				       (unsigned long)shadow_end);
+	}
+}
+
+void *__kasan_unpoison_vmalloc(const void *start, unsigned long size,
+			       kasan_vmalloc_flags_t flags)
+{
+	/*
+	 * Software KASAN modes unpoison both VM_ALLOC and non-VM_ALLOC
+	 * mappings, so the KASAN_VMALLOC_VM_ALLOC flag is ignored.
+	 * Software KASAN modes can't optimize zeroing memory by combining it
+	 * with setting memory tags, so the KASAN_VMALLOC_INIT flag is ignored.
+	 */
+
+	if (!kasan_arch_is_ready())
+		return (void *)start;
+
+	if (!is_vmalloc_or_module_addr(start))
+		return (void *)start;
+
+	/*
+	 * Don't tag executable memory with the tag-based mode.
+	 * The kernel doesn't tolerate having the PC register tagged.
+	 */
+	if (IS_ENABLED(CONFIG_KASAN_SW_TAGS) &&
+	    !(flags & KASAN_VMALLOC_PROT_NORMAL))
+		return (void *)start;
+
+	start = set_tag(start, kasan_random_tag());
+	kasan_unpoison(start, size, false);
+	return (void *)start;
+}
+
+/*
+ * Poison the shadow for a vmalloc region. Called as part of the
+ * freeing process at the time the region is freed.
+ */
+void __kasan_poison_vmalloc(const void *start, unsigned long size)
+{
+	if (!kasan_arch_is_ready())
+		return;
+
+	if (!is_vmalloc_or_module_addr(start))
+		return;
+
+	size = round_up(size, KASAN_GRANULE_SIZE);
+	kasan_poison(start, size, KASAN_VMALLOC_INVALID, false);
+}
+
+#else /* CONFIG_KASAN_VMALLOC */
+
+int kasan_alloc_module_shadow(void *addr, size_t size, gfp_t gfp_mask)
+{
+	void *ret;
+	size_t scaled_size;
+	size_t shadow_size;
+	unsigned long shadow_start;
+
+	shadow_start = (unsigned long)kasan_mem_to_shadow(addr);
+	scaled_size = (size + KASAN_GRANULE_SIZE - 1) >>
+				KASAN_SHADOW_SCALE_SHIFT;
+	shadow_size = round_up(scaled_size, PAGE_SIZE);
+
+	if (WARN_ON(!PAGE_ALIGNED(shadow_start)))
+		return -EINVAL;
+
+	if (IS_ENABLED(CONFIG_UML)) {
+		__memset((void *)shadow_start, KASAN_SHADOW_INIT, shadow_size);
+		return 0;
+	}
+
+	ret = __vmalloc_node_range(shadow_size, 1, shadow_start,
+			shadow_start + shadow_size,
+			GFP_KERNEL,
+			PAGE_KERNEL, VM_NO_GUARD, NUMA_NO_NODE,
+			__builtin_return_address(0));
+
+	if (ret) {
+		struct vm_struct *vm = find_vm_area(addr);
+		__memset(ret, KASAN_SHADOW_INIT, shadow_size);
+		vm->flags |= VM_KASAN;
+		kmemleak_ignore(ret);
+
+		if (vm->flags & VM_DEFER_KMEMLEAK)
+			kmemleak_vmalloc(vm, size, gfp_mask);
+
+		return 0;
+	}
+
+	return -ENOMEM;
+}
+
+void kasan_free_module_shadow(const struct vm_struct *vm)
+{
+	if (IS_ENABLED(CONFIG_UML))
+		return;
+
+	if (vm->flags & VM_KASAN)
+		vfree(kasan_mem_to_shadow(vm->addr));
+}
+
+#endif