Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 178 insertions, 0 deletions

diff --git a/net/802/fddi.c b/net/802/fddi.c
new file mode 100644
index 000000000..7533ce26b
--- /dev/null
+++ b/net/802/fddi.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		FDDI-type device handling.
+ *
+ * Version:	@(#)fddi.c	1.0.0	08/12/96
+ *
+ * Authors:	Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		fddi.c is based on previous eth.c and tr.c work by
+ *			Ross Biro
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Mark Evans, <evansmp@uhura.aston.ac.uk>
+ *			Florian La Roche, <rzsfl@rz.uni-sb.de>
+ *			Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *
+ *	Changes
+ *		Alan Cox		:	New arp/rebuild header
+ *		Maciej W. Rozycki	:	IPv6 support
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/fddidevice.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/errno.h>
+#include <net/arp.h>
+#include <net/sock.h>
+
+/*
+ * Create the FDDI MAC header for an arbitrary protocol layer
+ *
+ * saddr=NULL	means use device source address
+ * daddr=NULL	means leave destination address (eg unresolved arp)
+ */
+
+static int fddi_header(struct sk_buff *skb, struct net_device *dev,
+		       unsigned short type,
+		       const void *daddr, const void *saddr, unsigned int len)
+{
+	int hl = FDDI_K_SNAP_HLEN;
+	struct fddihdr *fddi;
+
+	if(type != ETH_P_IP && type != ETH_P_IPV6 && type != ETH_P_ARP)
+		hl=FDDI_K_8022_HLEN-3;
+	fddi = skb_push(skb, hl);
+	fddi->fc			 = FDDI_FC_K_ASYNC_LLC_DEF;
+	if(type == ETH_P_IP || type == ETH_P_IPV6 || type == ETH_P_ARP)
+	{
+		fddi->hdr.llc_snap.dsap		 = FDDI_EXTENDED_SAP;
+		fddi->hdr.llc_snap.ssap		 = FDDI_EXTENDED_SAP;
+		fddi->hdr.llc_snap.ctrl		 = FDDI_UI_CMD;
+		fddi->hdr.llc_snap.oui[0]	 = 0x00;
+		fddi->hdr.llc_snap.oui[1]	 = 0x00;
+		fddi->hdr.llc_snap.oui[2]	 = 0x00;
+		fddi->hdr.llc_snap.ethertype	 = htons(type);
+	}
+
+	/* Set the source and destination hardware addresses */
+
+	if (saddr != NULL)
+		memcpy(fddi->saddr, saddr, dev->addr_len);
+	else
+		memcpy(fddi->saddr, dev->dev_addr, dev->addr_len);
+
+	if (daddr != NULL)
+	{
+		memcpy(fddi->daddr, daddr, dev->addr_len);
+		return hl;
+	}
+
+	return -hl;
+}
+
+/*
+ * Determine the packet's protocol ID and fill in skb fields.
+ * This routine is called before an incoming packet is passed
+ * up.  It's used to fill in specific skb fields and to set
+ * the proper pointer to the start of packet data (skb->data).
+ */
+
+__be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
+{
+	struct fddihdr *fddi = (struct fddihdr *)skb->data;
+	__be16 type;
+
+	/*
+	 * Set mac.raw field to point to FC byte, set data field to point
+	 * to start of packet data.  Assume 802.2 SNAP frames for now.
+	 */
+
+	skb->dev = dev;
+	skb_reset_mac_header(skb);	/* point to frame control (FC) */
+
+	if(fddi->hdr.llc_8022_1.dsap==0xe0)
+	{
+		skb_pull(skb, FDDI_K_8022_HLEN-3);
+		type = htons(ETH_P_802_2);
+	}
+	else
+	{
+		skb_pull(skb, FDDI_K_SNAP_HLEN);		/* adjust for 21 byte header */
+		type=fddi->hdr.llc_snap.ethertype;
+	}
+
+	/* Set packet type based on destination address and flag settings */
+
+	if (*fddi->daddr & 0x01)
+	{
+		if (memcmp(fddi->daddr, dev->broadcast, FDDI_K_ALEN) == 0)
+			skb->pkt_type = PACKET_BROADCAST;
+		else
+			skb->pkt_type = PACKET_MULTICAST;
+	}
+
+	else if (dev->flags & IFF_PROMISC)
+	{
+		if (memcmp(fddi->daddr, dev->dev_addr, FDDI_K_ALEN))
+			skb->pkt_type = PACKET_OTHERHOST;
+	}
+
+	/* Assume 802.2 SNAP frames, for now */
+
+	return type;
+}
+
+EXPORT_SYMBOL(fddi_type_trans);
+
+static const struct header_ops fddi_header_ops = {
+	.create		= fddi_header,
+};
+
+
+static void fddi_setup(struct net_device *dev)
+{
+	dev->header_ops		= &fddi_header_ops;
+	dev->type		= ARPHRD_FDDI;
+	dev->hard_header_len	= FDDI_K_SNAP_HLEN+3;	/* Assume 802.2 SNAP hdr len + 3 pad bytes */
+	dev->mtu		= FDDI_K_SNAP_DLEN;	/* Assume max payload of 802.2 SNAP frame */
+	dev->min_mtu		= FDDI_K_SNAP_HLEN;
+	dev->max_mtu		= FDDI_K_SNAP_DLEN;
+	dev->addr_len		= FDDI_K_ALEN;
+	dev->tx_queue_len	= 100;			/* Long queues on FDDI */
+	dev->flags		= IFF_BROADCAST | IFF_MULTICAST;
+
+	memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
+}
+
+/**
+ * alloc_fddidev - Register FDDI device
+ * @sizeof_priv: Size of additional driver-private structure to be allocated
+ *	for this FDDI device
+ *
+ * Fill in the fields of the device structure with FDDI-generic values.
+ *
+ * Constructs a new net device, complete with a private data area of
+ * size @sizeof_priv.  A 32-byte (not bit) alignment is enforced for
+ * this private data area.
+ */
+struct net_device *alloc_fddidev(int sizeof_priv)
+{
+	return alloc_netdev(sizeof_priv, "fddi%d", NET_NAME_UNKNOWN,
+			    fddi_setup);
+}
+EXPORT_SYMBOL(alloc_fddidev);
+
+MODULE_LICENSE("GPL");