Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 474 insertions, 0 deletions

diff --git a/net/Kconfig b/net/Kconfig
new file mode 100644
index 000000000..48c33c222
--- /dev/null
+++ b/net/Kconfig
@@ -0,0 +1,474 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Network configuration
+#
+
+menuconfig NET
+	bool "Networking support"
+	select NLATTR
+	select GENERIC_NET_UTILS
+	select BPF
+	help
+	  Unless you really know what you are doing, you should say Y here.
+	  The reason is that some programs need kernel networking support even
+	  when running on a stand-alone machine that isn't connected to any
+	  other computer.
+
+	  If you are upgrading from an older kernel, you
+	  should consider updating your networking tools too because changes
+	  in the kernel and the tools often go hand in hand. The tools are
+	  contained in the package net-tools, the location and version number
+	  of which are given in <file:Documentation/Changes>.
+
+	  For a general introduction to Linux networking, it is highly
+	  recommended to read the NET-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+if NET
+
+config WANT_COMPAT_NETLINK_MESSAGES
+	bool
+	help
+	  This option can be selected by other options that need compat
+	  netlink messages.
+
+config COMPAT_NETLINK_MESSAGES
+	def_bool y
+	depends on COMPAT
+	depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES
+	help
+	  This option makes it possible to send different netlink messages
+	  to tasks depending on whether the task is a compat task or not. To
+	  achieve this, you need to set skb_shinfo(skb)->frag_list to the
+	  compat skb before sending the skb, the netlink code will sort out
+	  which message to actually pass to the task.
+
+	  Newly written code should NEVER need this option but do
+	  compat-independent messages instead!
+
+config NET_INGRESS
+	bool
+
+config NET_EGRESS
+	bool
+
+config NET_REDIRECT
+	bool
+
+config SKB_EXTENSIONS
+	bool
+
+menu "Networking options"
+
+source "net/packet/Kconfig"
+source "net/unix/Kconfig"
+source "net/tls/Kconfig"
+source "net/xfrm/Kconfig"
+source "net/iucv/Kconfig"
+source "net/smc/Kconfig"
+source "net/xdp/Kconfig"
+
+config INET
+	bool "TCP/IP networking"
+	help
+	  These are the protocols used on the Internet and on most local
+	  Ethernets. It is highly recommended to say Y here (this will enlarge
+	  your kernel by about 400 KB), since some programs (e.g. the X window
+	  system) use TCP/IP even if your machine is not connected to any
+	  other computer. You will get the so-called loopback device which
+	  allows you to ping yourself (great fun, that!).
+
+	  For an excellent introduction to Linux networking, please read the
+	  Linux Networking HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  If you say Y here and also to "/proc file system support" and
+	  "Sysctl support" below, you can change various aspects of the
+	  behavior of the TCP/IP code by writing to the (virtual) files in
+	  /proc/sys/net/ipv4/*; the options are explained in the file
+	  <file:Documentation/networking/ip-sysctl.rst>.
+
+	  Short answer: say Y.
+
+if INET
+source "net/ipv4/Kconfig"
+source "net/ipv6/Kconfig"
+source "net/netlabel/Kconfig"
+source "net/mptcp/Kconfig"
+
+endif # if INET
+
+config NETWORK_SECMARK
+	bool "Security Marking"
+	help
+	  This enables security marking of network packets, similar
+	  to nfmark, but designated for security purposes.
+	  If you are unsure how to answer this question, answer N.
+
+config NET_PTP_CLASSIFY
+	def_bool n
+
+config NETWORK_PHY_TIMESTAMPING
+	bool "Timestamping in PHY devices"
+	select NET_PTP_CLASSIFY
+	help
+	  This allows timestamping of network packets by PHYs (or
+	  other MII bus snooping devices) with hardware timestamping
+	  capabilities. This option adds some overhead in the transmit
+	  and receive paths.
+
+	  If you are unsure how to answer this question, answer N.
+
+menuconfig NETFILTER
+	bool "Network packet filtering framework (Netfilter)"
+	help
+	  Netfilter is a framework for filtering and mangling network packets
+	  that pass through your Linux box.
+
+	  The most common use of packet filtering is to run your Linux box as
+	  a firewall protecting a local network from the Internet. The type of
+	  firewall provided by this kernel support is called a "packet
+	  filter", which means that it can reject individual network packets
+	  based on type, source, destination etc. The other kind of firewall,
+	  a "proxy-based" one, is more secure but more intrusive and more
+	  bothersome to set up; it inspects the network traffic much more
+	  closely, modifies it and has knowledge about the higher level
+	  protocols, which a packet filter lacks. Moreover, proxy-based
+	  firewalls often require changes to the programs running on the local
+	  clients. Proxy-based firewalls don't need support by the kernel, but
+	  they are often combined with a packet filter, which only works if
+	  you say Y here.
+
+	  You should also say Y here if you intend to use your Linux box as
+	  the gateway to the Internet for a local network of machines without
+	  globally valid IP addresses. This is called "masquerading": if one
+	  of the computers on your local network wants to send something to
+	  the outside, your box can "masquerade" as that computer, i.e. it
+	  forwards the traffic to the intended outside destination, but
+	  modifies the packets to make it look like they came from the
+	  firewall box itself. It works both ways: if the outside host
+	  replies, the Linux box will silently forward the traffic to the
+	  correct local computer. This way, the computers on your local net
+	  are completely invisible to the outside world, even though they can
+	  reach the outside and can receive replies. It is even possible to
+	  run globally visible servers from within a masqueraded local network
+	  using a mechanism called portforwarding. Masquerading is also often
+	  called NAT (Network Address Translation).
+
+	  Another use of Netfilter is in transparent proxying: if a machine on
+	  the local network tries to connect to an outside host, your Linux
+	  box can transparently forward the traffic to a local server,
+	  typically a caching proxy server.
+
+	  Yet another use of Netfilter is building a bridging firewall. Using
+	  a bridge with Network packet filtering enabled makes iptables "see"
+	  the bridged traffic. For filtering on the lower network and Ethernet
+	  protocols over the bridge, use ebtables (under bridge netfilter
+	  configuration).
+
+	  Various modules exist for netfilter which replace the previous
+	  masquerading (ipmasqadm), packet filtering (ipchains), transparent
+	  proxying, and portforwarding mechanisms. Please see
+	  <file:Documentation/Changes> under "iptables" for the location of
+	  these packages.
+
+if NETFILTER
+
+config NETFILTER_ADVANCED
+	bool "Advanced netfilter configuration"
+	depends on NETFILTER
+	default y
+	help
+	  If you say Y here you can select between all the netfilter modules.
+	  If you say N the more unusual ones will not be shown and the
+	  basic ones needed by most people will default to 'M'.
+
+	  If unsure, say Y.
+
+config BRIDGE_NETFILTER
+	tristate "Bridged IP/ARP packets filtering"
+	depends on BRIDGE
+	depends on NETFILTER && INET
+	depends on NETFILTER_ADVANCED
+	select NETFILTER_FAMILY_BRIDGE
+	select SKB_EXTENSIONS
+	help
+	  Enabling this option will let arptables resp. iptables see bridged
+	  ARP resp. IP traffic. If you want a bridging firewall, you probably
+	  want this option enabled.
+	  Enabling or disabling this option doesn't enable or disable
+	  ebtables.
+
+	  If unsure, say N.
+
+source "net/netfilter/Kconfig"
+source "net/ipv4/netfilter/Kconfig"
+source "net/ipv6/netfilter/Kconfig"
+source "net/bridge/netfilter/Kconfig"
+
+endif
+
+source "net/bpfilter/Kconfig"
+
+source "net/dccp/Kconfig"
+source "net/sctp/Kconfig"
+source "net/rds/Kconfig"
+source "net/tipc/Kconfig"
+source "net/atm/Kconfig"
+source "net/l2tp/Kconfig"
+source "net/802/Kconfig"
+source "net/bridge/Kconfig"
+source "net/dsa/Kconfig"
+source "net/8021q/Kconfig"
+source "net/llc/Kconfig"
+source "drivers/net/appletalk/Kconfig"
+source "net/x25/Kconfig"
+source "net/lapb/Kconfig"
+source "net/phonet/Kconfig"
+source "net/6lowpan/Kconfig"
+source "net/ieee802154/Kconfig"
+source "net/mac802154/Kconfig"
+source "net/sched/Kconfig"
+source "net/dcb/Kconfig"
+source "net/dns_resolver/Kconfig"
+source "net/batman-adv/Kconfig"
+source "net/openvswitch/Kconfig"
+source "net/vmw_vsock/Kconfig"
+source "net/netlink/Kconfig"
+source "net/mpls/Kconfig"
+source "net/nsh/Kconfig"
+source "net/hsr/Kconfig"
+source "net/switchdev/Kconfig"
+source "net/l3mdev/Kconfig"
+source "net/qrtr/Kconfig"
+source "net/ncsi/Kconfig"
+
+config PCPU_DEV_REFCNT
+	bool "Use percpu variables to maintain network device refcount"
+	depends on SMP
+	default y
+	help
+	  network device refcount are using per cpu variables if this option is set.
+	  This can be forced to N to detect underflows (with a performance drop).
+
+config RPS
+	bool
+	depends on SMP && SYSFS
+	default y
+
+config RFS_ACCEL
+	bool
+	depends on RPS
+	select CPU_RMAP
+	default y
+
+config SOCK_RX_QUEUE_MAPPING
+	bool
+
+config XPS
+	bool
+	depends on SMP
+	select SOCK_RX_QUEUE_MAPPING
+	default y
+
+config HWBM
+	bool
+
+config CGROUP_NET_PRIO
+	bool "Network priority cgroup"
+	depends on CGROUPS
+	select SOCK_CGROUP_DATA
+	help
+	  Cgroup subsystem for use in assigning processes to network priorities on
+	  a per-interface basis.
+
+config CGROUP_NET_CLASSID
+	bool "Network classid cgroup"
+	depends on CGROUPS
+	select SOCK_CGROUP_DATA
+	help
+	  Cgroup subsystem for use as general purpose socket classid marker that is
+	  being used in cls_cgroup and for netfilter matching.
+
+config NET_RX_BUSY_POLL
+	bool
+	default y if !PREEMPT_RT
+
+config BQL
+	bool
+	depends on SYSFS
+	select DQL
+	default y
+
+config BPF_STREAM_PARSER
+	bool "enable BPF STREAM_PARSER"
+	depends on INET
+	depends on BPF_SYSCALL
+	depends on CGROUP_BPF
+	select STREAM_PARSER
+	select NET_SOCK_MSG
+	help
+	  Enabling this allows a TCP stream parser to be used with
+	  BPF_MAP_TYPE_SOCKMAP.
+
+config NET_FLOW_LIMIT
+	bool
+	depends on RPS
+	default y
+	help
+	  The network stack has to drop packets when a receive processing CPU's
+	  backlog reaches netdev_max_backlog. If a few out of many active flows
+	  generate the vast majority of load, drop their traffic earlier to
+	  maintain capacity for the other flows. This feature provides servers
+	  with many clients some protection against DoS by a single (spoofed)
+	  flow that greatly exceeds average workload.
+
+menu "Network testing"
+
+config NET_PKTGEN
+	tristate "Packet Generator (USE WITH CAUTION)"
+	depends on INET && PROC_FS
+	help
+	  This module will inject preconfigured packets, at a configurable
+	  rate, out of a given interface.  It is used for network interface
+	  stress testing and performance analysis.  If you don't understand
+	  what was just said, you don't need it: say N.
+
+	  Documentation on how to use the packet generator can be found
+	  at <file:Documentation/networking/pktgen.rst>.
+
+	  To compile this code as a module, choose M here: the
+	  module will be called pktgen.
+
+config NET_DROP_MONITOR
+	tristate "Network packet drop alerting service"
+	depends on INET && TRACEPOINTS
+	help
+	  This feature provides an alerting service to userspace in the
+	  event that packets are discarded in the network stack.  Alerts
+	  are broadcast via netlink socket to any listening user space
+	  process.  If you don't need network drop alerts, or if you are ok
+	  just checking the various proc files and other utilities for
+	  drop statistics, say N here.
+
+endmenu
+
+endmenu
+
+source "net/ax25/Kconfig"
+source "net/can/Kconfig"
+source "net/bluetooth/Kconfig"
+source "net/rxrpc/Kconfig"
+source "net/kcm/Kconfig"
+source "net/strparser/Kconfig"
+source "net/mctp/Kconfig"
+
+config FIB_RULES
+	bool
+
+menuconfig WIRELESS
+	bool "Wireless"
+	depends on !S390
+	default y
+
+if WIRELESS
+
+source "net/wireless/Kconfig"
+source "net/mac80211/Kconfig"
+
+endif # WIRELESS
+
+source "net/rfkill/Kconfig"
+source "net/9p/Kconfig"
+source "net/caif/Kconfig"
+source "net/ceph/Kconfig"
+source "net/nfc/Kconfig"
+source "net/psample/Kconfig"
+source "net/ife/Kconfig"
+
+config LWTUNNEL
+	bool "Network light weight tunnels"
+	help
+	  This feature provides an infrastructure to support light weight
+	  tunnels like mpls. There is no netdevice associated with a light
+	  weight tunnel endpoint. Tunnel encapsulation parameters are stored
+	  with light weight tunnel state associated with fib routes.
+
+config LWTUNNEL_BPF
+	bool "Execute BPF program as route nexthop action"
+	depends on LWTUNNEL && INET
+	default y if LWTUNNEL=y
+	help
+	  Allows to run BPF programs as a nexthop action following a route
+	  lookup for incoming and outgoing packets.
+
+config DST_CACHE
+	bool
+	default n
+
+config GRO_CELLS
+	bool
+	default n
+
+config SOCK_VALIDATE_XMIT
+	bool
+
+config NET_SELFTESTS
+	def_tristate PHYLIB
+	depends on PHYLIB && INET
+
+config NET_SOCK_MSG
+	bool
+	default n
+	help
+	  The NET_SOCK_MSG provides a framework for plain sockets (e.g. TCP) or
+	  ULPs (upper layer modules, e.g. TLS) to process L7 application data
+	  with the help of BPF programs.
+
+config NET_DEVLINK
+	bool
+	default n
+
+config PAGE_POOL
+	bool
+
+config PAGE_POOL_STATS
+	default n
+	bool "Page pool stats"
+	depends on PAGE_POOL
+	help
+	  Enable page pool statistics to track page allocation and recycling
+	  in page pools. This option incurs additional CPU cost in allocation
+	  and recycle paths and additional memory cost to store the statistics.
+	  These statistics are only available if this option is enabled and if
+	  the driver using the page pool supports exporting this data.
+
+	  If unsure, say N.
+
+config FAILOVER
+	tristate "Generic failover module"
+	help
+	  The failover module provides a generic interface for paravirtual
+	  drivers to register a netdev and a set of ops with a failover
+	  instance. The ops are used as event handlers that get called to
+	  handle netdev register/unregister/link change/name change events
+	  on slave pci ethernet devices with the same mac address as the
+	  failover netdev. This enables paravirtual drivers to use a
+	  VF as an accelerated low latency datapath. It also allows live
+	  migration of VMs with direct attached VFs by failing over to the
+	  paravirtual datapath when the VF is unplugged.
+
+config ETHTOOL_NETLINK
+	bool "Netlink interface for ethtool"
+	default y
+	help
+	  An alternative userspace interface for ethtool based on generic
+	  netlink. It provides better extensibility and some new features,
+	  e.g. notification messages.
+
+config NETDEV_ADDR_LIST_TEST
+	tristate "Unit tests for device address list"
+	default KUNIT_ALL_TESTS
+	depends on KUNIT
+
+endif   # if NET