Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 132 insertions, 0 deletions

diff --git a/net/core/request_sock.c b/net/core/request_sock.c
new file mode 100644
index 000000000..f35c2e998
--- /dev/null
+++ b/net/core/request_sock.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * NET		Generic infrastructure for Network protocols.
+ *
+ * Authors:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * 		From code originally in include/net/tcp.h
+ */
+
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/tcp.h>
+#include <linux/vmalloc.h>
+
+#include <net/request_sock.h>
+
+/*
+ * Maximum number of SYN_RECV sockets in queue per LISTEN socket.
+ * One SYN_RECV socket costs about 80bytes on a 32bit machine.
+ * It would be better to replace it with a global counter for all sockets
+ * but then some measure against one socket starving all other sockets
+ * would be needed.
+ *
+ * The minimum value of it is 128. Experiments with real servers show that
+ * it is absolutely not enough even at 100conn/sec. 256 cures most
+ * of problems.
+ * This value is adjusted to 128 for low memory machines,
+ * and it will increase in proportion to the memory of machine.
+ * Note : Dont forget somaxconn that may limit backlog too.
+ */
+
+void reqsk_queue_alloc(struct request_sock_queue *queue)
+{
+	spin_lock_init(&queue->rskq_lock);
+
+	spin_lock_init(&queue->fastopenq.lock);
+	queue->fastopenq.rskq_rst_head = NULL;
+	queue->fastopenq.rskq_rst_tail = NULL;
+	queue->fastopenq.qlen = 0;
+
+	queue->rskq_accept_head = NULL;
+}
+
+/*
+ * This function is called to set a Fast Open socket's "fastopen_rsk" field
+ * to NULL when a TFO socket no longer needs to access the request_sock.
+ * This happens only after 3WHS has been either completed or aborted (e.g.,
+ * RST is received).
+ *
+ * Before TFO, a child socket is created only after 3WHS is completed,
+ * hence it never needs to access the request_sock. things get a lot more
+ * complex with TFO. A child socket, accepted or not, has to access its
+ * request_sock for 3WHS processing, e.g., to retransmit SYN-ACK pkts,
+ * until 3WHS is either completed or aborted. Afterwards the req will stay
+ * until either the child socket is accepted, or in the rare case when the
+ * listener is closed before the child is accepted.
+ *
+ * In short, a request socket is only freed after BOTH 3WHS has completed
+ * (or aborted) and the child socket has been accepted (or listener closed).
+ * When a child socket is accepted, its corresponding req->sk is set to
+ * NULL since it's no longer needed. More importantly, "req->sk == NULL"
+ * will be used by the code below to determine if a child socket has been
+ * accepted or not, and the check is protected by the fastopenq->lock
+ * described below.
+ *
+ * Note that fastopen_rsk is only accessed from the child socket's context
+ * with its socket lock held. But a request_sock (req) can be accessed by
+ * both its child socket through fastopen_rsk, and a listener socket through
+ * icsk_accept_queue.rskq_accept_head. To protect the access a simple spin
+ * lock per listener "icsk->icsk_accept_queue.fastopenq->lock" is created.
+ * only in the rare case when both the listener and the child locks are held,
+ * e.g., in inet_csk_listen_stop() do we not need to acquire the lock.
+ * The lock also protects other fields such as fastopenq->qlen, which is
+ * decremented by this function when fastopen_rsk is no longer needed.
+ *
+ * Note that another solution was to simply use the existing socket lock
+ * from the listener. But first socket lock is difficult to use. It is not
+ * a simple spin lock - one must consider sock_owned_by_user() and arrange
+ * to use sk_add_backlog() stuff. But what really makes it infeasible is the
+ * locking hierarchy violation. E.g., inet_csk_listen_stop() may try to
+ * acquire a child's lock while holding listener's socket lock. A corner
+ * case might also exist in tcp_v4_hnd_req() that will trigger this locking
+ * order.
+ *
+ * This function also sets "treq->tfo_listener" to false.
+ * treq->tfo_listener is used by the listener so it is protected by the
+ * fastopenq->lock in this function.
+ */
+void reqsk_fastopen_remove(struct sock *sk, struct request_sock *req,
+			   bool reset)
+{
+	struct sock *lsk = req->rsk_listener;
+	struct fastopen_queue *fastopenq;
+
+	fastopenq = &inet_csk(lsk)->icsk_accept_queue.fastopenq;
+
+	RCU_INIT_POINTER(tcp_sk(sk)->fastopen_rsk, NULL);
+	spin_lock_bh(&fastopenq->lock);
+	fastopenq->qlen--;
+	tcp_rsk(req)->tfo_listener = false;
+	if (req->sk)	/* the child socket hasn't been accepted yet */
+		goto out;
+
+	if (!reset || lsk->sk_state != TCP_LISTEN) {
+		/* If the listener has been closed don't bother with the
+		 * special RST handling below.
+		 */
+		spin_unlock_bh(&fastopenq->lock);
+		reqsk_put(req);
+		return;
+	}
+	/* Wait for 60secs before removing a req that has triggered RST.
+	 * This is a simple defense against TFO spoofing attack - by
+	 * counting the req against fastopen.max_qlen, and disabling
+	 * TFO when the qlen exceeds max_qlen.
+	 *
+	 * For more details see CoNext'11 "TCP Fast Open" paper.
+	 */
+	req->rsk_timer.expires = jiffies + 60*HZ;
+	if (fastopenq->rskq_rst_head == NULL)
+		fastopenq->rskq_rst_head = req;
+	else
+		fastopenq->rskq_rst_tail->dl_next = req;
+
+	req->dl_next = NULL;
+	fastopenq->rskq_rst_tail = req;
+	fastopenq->qlen++;
+out:
+	spin_unlock_bh(&fastopenq->lock);
+}