Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

2 files changed, 656 insertions, 0 deletions

diff --git a/net/ethernet/Makefile b/net/ethernet/Makefile
new file mode 100644
index 000000000..e03eff94e
--- /dev/null
+++ b/net/ethernet/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the Linux Ethernet layer.
+#
+
+obj-y					+= eth.o
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
new file mode 100644
index 000000000..2edc8b796
--- /dev/null
+++ b/net/ethernet/eth.c
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Ethernet-type device handling.
+ *
+ * Version:	@(#)eth.c	1.0.7	05/25/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Mark Evans, <evansmp@uhura.aston.ac.uk>
+ *		Florian  La Roche, <rzsfl@rz.uni-sb.de>
+ *		Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *
+ * Fixes:
+ *		Mr Linux	: Arp problems
+ *		Alan Cox	: Generic queue tidyup (very tiny here)
+ *		Alan Cox	: eth_header ntohs should be htons
+ *		Alan Cox	: eth_rebuild_header missing an htons and
+ *				  minor other things.
+ *		Tegge		: Arp bug fixes.
+ *		Florian		: Removed many unnecessary functions, code cleanup
+ *				  and changes for new arp and skbuff.
+ *		Alan Cox	: Redid header building to reflect new format.
+ *		Alan Cox	: ARP only when compiled with CONFIG_INET
+ *		Greg Page	: 802.2 and SNAP stuff.
+ *		Alan Cox	: MAC layer pointers/new format.
+ *		Paul Gortmaker	: eth_copy_and_sum shouldn't csum padding.
+ *		Alan Cox	: Protect against forwarding explosions with
+ *				  older network drivers and IFF_ALLMULTI.
+ *	Christer Weinigel	: Better rebuild header message.
+ *             Andrew Morton    : 26Feb01: kill ether_setup() - use netdev_boot_setup().
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/inet.h>
+#include <linux/ip.h>
+#include <linux/netdevice.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/if_ether.h>
+#include <linux/of_net.h>
+#include <linux/pci.h>
+#include <linux/property.h>
+#include <net/dst.h>
+#include <net/arp.h>
+#include <net/sock.h>
+#include <net/ipv6.h>
+#include <net/ip.h>
+#include <net/dsa.h>
+#include <net/flow_dissector.h>
+#include <net/gro.h>
+#include <linux/uaccess.h>
+#include <net/pkt_sched.h>
+
+/**
+ * eth_header - create the Ethernet header
+ * @skb:	buffer to alter
+ * @dev:	source device
+ * @type:	Ethernet type field
+ * @daddr: destination address (NULL leave destination address)
+ * @saddr: source address (NULL use device source address)
+ * @len:   packet length (<= skb->len)
+ *
+ *
+ * Set the protocol type. For a packet of type ETH_P_802_3/2 we put the length
+ * in here instead.
+ */
+int eth_header(struct sk_buff *skb, struct net_device *dev,
+	       unsigned short type,
+	       const void *daddr, const void *saddr, unsigned int len)
+{
+	struct ethhdr *eth = skb_push(skb, ETH_HLEN);
+
+	if (type != ETH_P_802_3 && type != ETH_P_802_2)
+		eth->h_proto = htons(type);
+	else
+		eth->h_proto = htons(len);
+
+	/*
+	 *      Set the source hardware address.
+	 */
+
+	if (!saddr)
+		saddr = dev->dev_addr;
+	memcpy(eth->h_source, saddr, ETH_ALEN);
+
+	if (daddr) {
+		memcpy(eth->h_dest, daddr, ETH_ALEN);
+		return ETH_HLEN;
+	}
+
+	/*
+	 *      Anyway, the loopback-device should never use this function...
+	 */
+
+	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
+		eth_zero_addr(eth->h_dest);
+		return ETH_HLEN;
+	}
+
+	return -ETH_HLEN;
+}
+EXPORT_SYMBOL(eth_header);
+
+/**
+ * eth_get_headlen - determine the length of header for an ethernet frame
+ * @dev: pointer to network device
+ * @data: pointer to start of frame
+ * @len: total length of frame
+ *
+ * Make a best effort attempt to pull the length for all of the headers for
+ * a given frame in a linear buffer.
+ */
+u32 eth_get_headlen(const struct net_device *dev, const void *data, u32 len)
+{
+	const unsigned int flags = FLOW_DISSECTOR_F_PARSE_1ST_FRAG;
+	const struct ethhdr *eth = (const struct ethhdr *)data;
+	struct flow_keys_basic keys;
+
+	/* this should never happen, but better safe than sorry */
+	if (unlikely(len < sizeof(*eth)))
+		return len;
+
+	/* parse any remaining L2/L3 headers, check for L4 */
+	if (!skb_flow_dissect_flow_keys_basic(dev_net(dev), NULL, &keys, data,
+					      eth->h_proto, sizeof(*eth),
+					      len, flags))
+		return max_t(u32, keys.control.thoff, sizeof(*eth));
+
+	/* parse for any L4 headers */
+	return min_t(u32, __skb_get_poff(NULL, data, &keys, len), len);
+}
+EXPORT_SYMBOL(eth_get_headlen);
+
+/**
+ * eth_type_trans - determine the packet's protocol ID.
+ * @skb: received socket data
+ * @dev: receiving network device
+ *
+ * The rule here is that we
+ * assume 802.3 if the type field is short enough to be a length.
+ * This is normal practice and works for any 'now in use' protocol.
+ */
+__be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev)
+{
+	unsigned short _service_access_point;
+	const unsigned short *sap;
+	const struct ethhdr *eth;
+
+	skb->dev = dev;
+	skb_reset_mac_header(skb);
+
+	eth = (struct ethhdr *)skb->data;
+	skb_pull_inline(skb, ETH_HLEN);
+
+	if (unlikely(!ether_addr_equal_64bits(eth->h_dest,
+					      dev->dev_addr))) {
+		if (unlikely(is_multicast_ether_addr_64bits(eth->h_dest))) {
+			if (ether_addr_equal_64bits(eth->h_dest, dev->broadcast))
+				skb->pkt_type = PACKET_BROADCAST;
+			else
+				skb->pkt_type = PACKET_MULTICAST;
+		} else {
+			skb->pkt_type = PACKET_OTHERHOST;
+		}
+	}
+
+	/*
+	 * Some variants of DSA tagging don't have an ethertype field
+	 * at all, so we check here whether one of those tagging
+	 * variants has been configured on the receiving interface,
+	 * and if so, set skb->protocol without looking at the packet.
+	 */
+	if (unlikely(netdev_uses_dsa(dev)))
+		return htons(ETH_P_XDSA);
+
+	if (likely(eth_proto_is_802_3(eth->h_proto)))
+		return eth->h_proto;
+
+	/*
+	 *      This is a magic hack to spot IPX packets. Older Novell breaks
+	 *      the protocol design and runs IPX over 802.3 without an 802.2 LLC
+	 *      layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
+	 *      won't work for fault tolerant netware but does for the rest.
+	 */
+	sap = skb_header_pointer(skb, 0, sizeof(*sap), &_service_access_point);
+	if (sap && *sap == 0xFFFF)
+		return htons(ETH_P_802_3);
+
+	/*
+	 *      Real 802.2 LLC
+	 */
+	return htons(ETH_P_802_2);
+}
+EXPORT_SYMBOL(eth_type_trans);
+
+/**
+ * eth_header_parse - extract hardware address from packet
+ * @skb: packet to extract header from
+ * @haddr: destination buffer
+ */
+int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr)
+{
+	const struct ethhdr *eth = eth_hdr(skb);
+	memcpy(haddr, eth->h_source, ETH_ALEN);
+	return ETH_ALEN;
+}
+EXPORT_SYMBOL(eth_header_parse);
+
+/**
+ * eth_header_cache - fill cache entry from neighbour
+ * @neigh: source neighbour
+ * @hh: destination cache entry
+ * @type: Ethernet type field
+ *
+ * Create an Ethernet header template from the neighbour.
+ */
+int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh, __be16 type)
+{
+	struct ethhdr *eth;
+	const struct net_device *dev = neigh->dev;
+
+	eth = (struct ethhdr *)
+	    (((u8 *) hh->hh_data) + (HH_DATA_OFF(sizeof(*eth))));
+
+	if (type == htons(ETH_P_802_3))
+		return -1;
+
+	eth->h_proto = type;
+	memcpy(eth->h_source, dev->dev_addr, ETH_ALEN);
+	memcpy(eth->h_dest, neigh->ha, ETH_ALEN);
+
+	/* Pairs with READ_ONCE() in neigh_resolve_output(),
+	 * neigh_hh_output() and neigh_update_hhs().
+	 */
+	smp_store_release(&hh->hh_len, ETH_HLEN);
+
+	return 0;
+}
+EXPORT_SYMBOL(eth_header_cache);
+
+/**
+ * eth_header_cache_update - update cache entry
+ * @hh: destination cache entry
+ * @dev: network device
+ * @haddr: new hardware address
+ *
+ * Called by Address Resolution module to notify changes in address.
+ */
+void eth_header_cache_update(struct hh_cache *hh,
+			     const struct net_device *dev,
+			     const unsigned char *haddr)
+{
+	memcpy(((u8 *) hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
+	       haddr, ETH_ALEN);
+}
+EXPORT_SYMBOL(eth_header_cache_update);
+
+/**
+ * eth_header_parse_protocol - extract protocol from L2 header
+ * @skb: packet to extract protocol from
+ */
+__be16 eth_header_parse_protocol(const struct sk_buff *skb)
+{
+	const struct ethhdr *eth = eth_hdr(skb);
+
+	return eth->h_proto;
+}
+EXPORT_SYMBOL(eth_header_parse_protocol);
+
+/**
+ * eth_prepare_mac_addr_change - prepare for mac change
+ * @dev: network device
+ * @p: socket address
+ */
+int eth_prepare_mac_addr_change(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	if (!(dev->priv_flags & IFF_LIVE_ADDR_CHANGE) && netif_running(dev))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+	return 0;
+}
+EXPORT_SYMBOL(eth_prepare_mac_addr_change);
+
+/**
+ * eth_commit_mac_addr_change - commit mac change
+ * @dev: network device
+ * @p: socket address
+ */
+void eth_commit_mac_addr_change(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	eth_hw_addr_set(dev, addr->sa_data);
+}
+EXPORT_SYMBOL(eth_commit_mac_addr_change);
+
+/**
+ * eth_mac_addr - set new Ethernet hardware address
+ * @dev: network device
+ * @p: socket address
+ *
+ * Change hardware address of device.
+ *
+ * This doesn't change hardware matching, so needs to be overridden
+ * for most real devices.
+ */
+int eth_mac_addr(struct net_device *dev, void *p)
+{
+	int ret;
+
+	ret = eth_prepare_mac_addr_change(dev, p);
+	if (ret < 0)
+		return ret;
+	eth_commit_mac_addr_change(dev, p);
+	return 0;
+}
+EXPORT_SYMBOL(eth_mac_addr);
+
+int eth_validate_addr(struct net_device *dev)
+{
+	if (!is_valid_ether_addr(dev->dev_addr))
+		return -EADDRNOTAVAIL;
+
+	return 0;
+}
+EXPORT_SYMBOL(eth_validate_addr);
+
+const struct header_ops eth_header_ops ____cacheline_aligned = {
+	.create		= eth_header,
+	.parse		= eth_header_parse,
+	.cache		= eth_header_cache,
+	.cache_update	= eth_header_cache_update,
+	.parse_protocol	= eth_header_parse_protocol,
+};
+
+/**
+ * ether_setup - setup Ethernet network device
+ * @dev: network device
+ *
+ * Fill in the fields of the device structure with Ethernet-generic values.
+ */
+void ether_setup(struct net_device *dev)
+{
+	dev->header_ops		= &eth_header_ops;
+	dev->type		= ARPHRD_ETHER;
+	dev->hard_header_len 	= ETH_HLEN;
+	dev->min_header_len	= ETH_HLEN;
+	dev->mtu		= ETH_DATA_LEN;
+	dev->min_mtu		= ETH_MIN_MTU;
+	dev->max_mtu		= ETH_DATA_LEN;
+	dev->addr_len		= ETH_ALEN;
+	dev->tx_queue_len	= DEFAULT_TX_QUEUE_LEN;
+	dev->flags		= IFF_BROADCAST|IFF_MULTICAST;
+	dev->priv_flags		|= IFF_TX_SKB_SHARING;
+
+	eth_broadcast_addr(dev->broadcast);
+
+}
+EXPORT_SYMBOL(ether_setup);
+
+/**
+ * alloc_etherdev_mqs - Allocates and sets up an Ethernet device
+ * @sizeof_priv: Size of additional driver-private structure to be allocated
+ *	for this Ethernet device
+ * @txqs: The number of TX queues this device has.
+ * @rxqs: The number of RX queues this device has.
+ *
+ * Fill in the fields of the device structure with Ethernet-generic
+ * values. Basically does everything except registering the device.
+ *
+ * Constructs a new net device, complete with a private data area of
+ * size (sizeof_priv).  A 32-byte (not bit) alignment is enforced for
+ * this private data area.
+ */
+
+struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
+				      unsigned int rxqs)
+{
+	return alloc_netdev_mqs(sizeof_priv, "eth%d", NET_NAME_ENUM,
+				ether_setup, txqs, rxqs);
+}
+EXPORT_SYMBOL(alloc_etherdev_mqs);
+
+ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len)
+{
+	return sysfs_emit(buf, "%*phC\n", len, addr);
+}
+EXPORT_SYMBOL(sysfs_format_mac);
+
+struct sk_buff *eth_gro_receive(struct list_head *head, struct sk_buff *skb)
+{
+	const struct packet_offload *ptype;
+	unsigned int hlen, off_eth;
+	struct sk_buff *pp = NULL;
+	struct ethhdr *eh, *eh2;
+	struct sk_buff *p;
+	__be16 type;
+	int flush = 1;
+
+	off_eth = skb_gro_offset(skb);
+	hlen = off_eth + sizeof(*eh);
+	eh = skb_gro_header(skb, hlen, off_eth);
+	if (unlikely(!eh))
+		goto out;
+
+	flush = 0;
+
+	list_for_each_entry(p, head, list) {
+		if (!NAPI_GRO_CB(p)->same_flow)
+			continue;
+
+		eh2 = (struct ethhdr *)(p->data + off_eth);
+		if (compare_ether_header(eh, eh2)) {
+			NAPI_GRO_CB(p)->same_flow = 0;
+			continue;
+		}
+	}
+
+	type = eh->h_proto;
+
+	ptype = gro_find_receive_by_type(type);
+	if (ptype == NULL) {
+		flush = 1;
+		goto out;
+	}
+
+	skb_gro_pull(skb, sizeof(*eh));
+	skb_gro_postpull_rcsum(skb, eh, sizeof(*eh));
+
+	pp = indirect_call_gro_receive_inet(ptype->callbacks.gro_receive,
+					    ipv6_gro_receive, inet_gro_receive,
+					    head, skb);
+
+out:
+	skb_gro_flush_final(skb, pp, flush);
+
+	return pp;
+}
+EXPORT_SYMBOL(eth_gro_receive);
+
+int eth_gro_complete(struct sk_buff *skb, int nhoff)
+{
+	struct ethhdr *eh = (struct ethhdr *)(skb->data + nhoff);
+	__be16 type = eh->h_proto;
+	struct packet_offload *ptype;
+	int err = -ENOSYS;
+
+	if (skb->encapsulation)
+		skb_set_inner_mac_header(skb, nhoff);
+
+	ptype = gro_find_complete_by_type(type);
+	if (ptype != NULL)
+		err = INDIRECT_CALL_INET(ptype->callbacks.gro_complete,
+					 ipv6_gro_complete, inet_gro_complete,
+					 skb, nhoff + sizeof(*eh));
+
+	return err;
+}
+EXPORT_SYMBOL(eth_gro_complete);
+
+static struct packet_offload eth_packet_offload __read_mostly = {
+	.type = cpu_to_be16(ETH_P_TEB),
+	.priority = 10,
+	.callbacks = {
+		.gro_receive = eth_gro_receive,
+		.gro_complete = eth_gro_complete,
+	},
+};
+
+static int __init eth_offload_init(void)
+{
+	dev_add_offload(&eth_packet_offload);
+
+	return 0;
+}
+
+fs_initcall(eth_offload_init);
+
+unsigned char * __weak arch_get_platform_mac_address(void)
+{
+	return NULL;
+}
+
+int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr)
+{
+	unsigned char *addr;
+	int ret;
+
+	ret = of_get_mac_address(dev->of_node, mac_addr);
+	if (!ret)
+		return 0;
+
+	addr = arch_get_platform_mac_address();
+	if (!addr)
+		return -ENODEV;
+
+	ether_addr_copy(mac_addr, addr);
+
+	return 0;
+}
+EXPORT_SYMBOL(eth_platform_get_mac_address);
+
+/**
+ * platform_get_ethdev_address - Set netdev's MAC address from a given device
+ * @dev:	Pointer to the device
+ * @netdev:	Pointer to netdev to write the address to
+ *
+ * Wrapper around eth_platform_get_mac_address() which writes the address
+ * directly to netdev->dev_addr.
+ */
+int platform_get_ethdev_address(struct device *dev, struct net_device *netdev)
+{
+	u8 addr[ETH_ALEN] __aligned(2);
+	int ret;
+
+	ret = eth_platform_get_mac_address(dev, addr);
+	if (!ret)
+		eth_hw_addr_set(netdev, addr);
+	return ret;
+}
+EXPORT_SYMBOL(platform_get_ethdev_address);
+
+/**
+ * nvmem_get_mac_address - Obtain the MAC address from an nvmem cell named
+ * 'mac-address' associated with given device.
+ *
+ * @dev:	Device with which the mac-address cell is associated.
+ * @addrbuf:	Buffer to which the MAC address will be copied on success.
+ *
+ * Returns 0 on success or a negative error number on failure.
+ */
+int nvmem_get_mac_address(struct device *dev, void *addrbuf)
+{
+	struct nvmem_cell *cell;
+	const void *mac;
+	size_t len;
+
+	cell = nvmem_cell_get(dev, "mac-address");
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	mac = nvmem_cell_read(cell, &len);
+	nvmem_cell_put(cell);
+
+	if (IS_ERR(mac))
+		return PTR_ERR(mac);
+
+	if (len != ETH_ALEN || !is_valid_ether_addr(mac)) {
+		kfree(mac);
+		return -EINVAL;
+	}
+
+	ether_addr_copy(addrbuf, mac);
+	kfree(mac);
+
+	return 0;
+}
+
+static int fwnode_get_mac_addr(struct fwnode_handle *fwnode,
+			       const char *name, char *addr)
+{
+	int ret;
+
+	ret = fwnode_property_read_u8_array(fwnode, name, addr, ETH_ALEN);
+	if (ret)
+		return ret;
+
+	if (!is_valid_ether_addr(addr))
+		return -EINVAL;
+	return 0;
+}
+
+/**
+ * fwnode_get_mac_address - Get the MAC from the firmware node
+ * @fwnode:	Pointer to the firmware node
+ * @addr:	Address of buffer to store the MAC in
+ *
+ * Search the firmware node for the best MAC address to use.  'mac-address' is
+ * checked first, because that is supposed to contain to "most recent" MAC
+ * address. If that isn't set, then 'local-mac-address' is checked next,
+ * because that is the default address.  If that isn't set, then the obsolete
+ * 'address' is checked, just in case we're using an old device tree.
+ *
+ * Note that the 'address' property is supposed to contain a virtual address of
+ * the register set, but some DTS files have redefined that property to be the
+ * MAC address.
+ *
+ * All-zero MAC addresses are rejected, because those could be properties that
+ * exist in the firmware tables, but were not updated by the firmware.  For
+ * example, the DTS could define 'mac-address' and 'local-mac-address', with
+ * zero MAC addresses.  Some older U-Boots only initialized 'local-mac-address'.
+ * In this case, the real MAC is in 'local-mac-address', and 'mac-address'
+ * exists but is all zeros.
+ */
+int fwnode_get_mac_address(struct fwnode_handle *fwnode, char *addr)
+{
+	if (!fwnode_get_mac_addr(fwnode, "mac-address", addr) ||
+	    !fwnode_get_mac_addr(fwnode, "local-mac-address", addr) ||
+	    !fwnode_get_mac_addr(fwnode, "address", addr))
+		return 0;
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(fwnode_get_mac_address);
+
+/**
+ * device_get_mac_address - Get the MAC for a given device
+ * @dev:	Pointer to the device
+ * @addr:	Address of buffer to store the MAC in
+ */
+int device_get_mac_address(struct device *dev, char *addr)
+{
+	return fwnode_get_mac_address(dev_fwnode(dev), addr);
+}
+EXPORT_SYMBOL(device_get_mac_address);
+
+/**
+ * device_get_ethdev_address - Set netdev's MAC address from a given device
+ * @dev:	Pointer to the device
+ * @netdev:	Pointer to netdev to write the address to
+ *
+ * Wrapper around device_get_mac_address() which writes the address
+ * directly to netdev->dev_addr.
+ */
+int device_get_ethdev_address(struct device *dev, struct net_device *netdev)
+{
+	u8 addr[ETH_ALEN];
+	int ret;
+
+	ret = device_get_mac_address(dev, addr);
+	if (!ret)
+		eth_hw_addr_set(netdev, addr);
+	return ret;
+}
+EXPORT_SYMBOL(device_get_ethdev_address);