Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 753 insertions, 0 deletions

diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
new file mode 100644
index 000000000..2dfb12230
--- /dev/null
+++ b/net/ipv4/Kconfig
@@ -0,0 +1,753 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# IP configuration
+#
+config IP_MULTICAST
+	bool "IP: multicasting"
+	help
+	  This is code for addressing several networked computers at once,
+	  enlarging your kernel by about 2 KB. You need multicasting if you
+	  intend to participate in the MBONE, a high bandwidth network on top
+	  of the Internet which carries audio and video broadcasts. More
+	  information about the MBONE is on the WWW at
+	  <https://www.savetz.com/mbone/>. For most people, it's safe to say N.
+
+config IP_ADVANCED_ROUTER
+	bool "IP: advanced router"
+	help
+	  If you intend to run your Linux box mostly as a router, i.e. as a
+	  computer that forwards and redistributes network packets, say Y; you
+	  will then be presented with several options that allow more precise
+	  control about the routing process.
+
+	  The answer to this question won't directly affect the kernel:
+	  answering N will just cause the configurator to skip all the
+	  questions about advanced routing.
+
+	  Note that your box can only act as a router if you enable IP
+	  forwarding in your kernel; you can do that by saying Y to "/proc
+	  file system support" and "Sysctl support" below and executing the
+	  line
+
+	  echo "1" > /proc/sys/net/ipv4/ip_forward
+
+	  at boot time after the /proc file system has been mounted.
+
+	  If you turn on IP forwarding, you should consider the rp_filter, which
+	  automatically rejects incoming packets if the routing table entry
+	  for their source address doesn't match the network interface they're
+	  arriving on. This has security advantages because it prevents the
+	  so-called IP spoofing, however it can pose problems if you use
+	  asymmetric routing (packets from you to a host take a different path
+	  than packets from that host to you) or if you operate a non-routing
+	  host which has several IP addresses on different interfaces. To turn
+	  rp_filter on use:
+
+	  echo 1 > /proc/sys/net/ipv4/conf/<device>/rp_filter
+	   or
+	  echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter
+
+	  Note that some distributions enable it in startup scripts.
+	  For details about rp_filter strict and loose mode read
+	  <file:Documentation/networking/ip-sysctl.rst>.
+
+	  If unsure, say N here.
+
+config IP_FIB_TRIE_STATS
+	bool "FIB TRIE statistics"
+	depends on IP_ADVANCED_ROUTER
+	help
+	  Keep track of statistics on structure of FIB TRIE table.
+	  Useful for testing and measuring TRIE performance.
+
+config IP_MULTIPLE_TABLES
+	bool "IP: policy routing"
+	depends on IP_ADVANCED_ROUTER
+	select FIB_RULES
+	help
+	  Normally, a router decides what to do with a received packet based
+	  solely on the packet's final destination address. If you say Y here,
+	  the Linux router will also be able to take the packet's source
+	  address into account. Furthermore, the TOS (Type-Of-Service) field
+	  of the packet can be used for routing decisions as well.
+
+	  If you need more information, see the Linux Advanced
+	  Routing and Traffic Control documentation at
+	  <https://lartc.org/howto/lartc.rpdb.html>
+
+	  If unsure, say N.
+
+config IP_ROUTE_MULTIPATH
+	bool "IP: equal cost multipath"
+	depends on IP_ADVANCED_ROUTER
+	help
+	  Normally, the routing tables specify a single action to be taken in
+	  a deterministic manner for a given packet. If you say Y here
+	  however, it becomes possible to attach several actions to a packet
+	  pattern, in effect specifying several alternative paths to travel
+	  for those packets. The router considers all these paths to be of
+	  equal "cost" and chooses one of them in a non-deterministic fashion
+	  if a matching packet arrives.
+
+config IP_ROUTE_VERBOSE
+	bool "IP: verbose route monitoring"
+	depends on IP_ADVANCED_ROUTER
+	help
+	  If you say Y here, which is recommended, then the kernel will print
+	  verbose messages regarding the routing, for example warnings about
+	  received packets which look strange and could be evidence of an
+	  attack or a misconfigured system somewhere. The information is
+	  handled by the klogd daemon which is responsible for kernel messages
+	  ("man klogd").
+
+config IP_ROUTE_CLASSID
+	bool
+
+config IP_PNP
+	bool "IP: kernel level autoconfiguration"
+	help
+	  This enables automatic configuration of IP addresses of devices and
+	  of the routing table during kernel boot, based on either information
+	  supplied on the kernel command line or by BOOTP or RARP protocols.
+	  You need to say Y only for diskless machines requiring network
+	  access to boot (in which case you want to say Y to "Root file system
+	  on NFS" as well), because all other machines configure the network
+	  in their startup scripts.
+
+config IP_PNP_DHCP
+	bool "IP: DHCP support"
+	depends on IP_PNP
+	help
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS and you want the IP address of your computer to be
+	  discovered automatically at boot time using the DHCP protocol (a
+	  special protocol designed for doing this job), say Y here. In case
+	  the boot ROM of your network card was designed for booting Linux and
+	  does DHCP itself, providing all necessary information on the kernel
+	  command line, you can say N here.
+
+	  If unsure, say Y. Note that if you want to use DHCP, a DHCP server
+	  must be operating on your network.  Read
+	  <file:Documentation/admin-guide/nfs/nfsroot.rst> for details.
+
+config IP_PNP_BOOTP
+	bool "IP: BOOTP support"
+	depends on IP_PNP
+	help
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS and you want the IP address of your computer to be
+	  discovered automatically at boot time using the BOOTP protocol (a
+	  special protocol designed for doing this job), say Y here. In case
+	  the boot ROM of your network card was designed for booting Linux and
+	  does BOOTP itself, providing all necessary information on the kernel
+	  command line, you can say N here. If unsure, say Y. Note that if you
+	  want to use BOOTP, a BOOTP server must be operating on your network.
+	  Read <file:Documentation/admin-guide/nfs/nfsroot.rst> for details.
+
+config IP_PNP_RARP
+	bool "IP: RARP support"
+	depends on IP_PNP
+	help
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS and you want the IP address of your computer to be
+	  discovered automatically at boot time using the RARP protocol (an
+	  older protocol which is being obsoleted by BOOTP and DHCP), say Y
+	  here. Note that if you want to use RARP, a RARP server must be
+	  operating on your network. Read
+	  <file:Documentation/admin-guide/nfs/nfsroot.rst> for details.
+
+config NET_IPIP
+	tristate "IP: tunneling"
+	select INET_TUNNEL
+	select NET_IP_TUNNEL
+	help
+	  Tunneling means encapsulating data of one protocol type within
+	  another protocol and sending it over a channel that understands the
+	  encapsulating protocol. This particular tunneling driver implements
+	  encapsulation of IP within IP, which sounds kind of pointless, but
+	  can be useful if you want to make your (or some other) machine
+	  appear on a different network than it physically is, or to use
+	  mobile-IP facilities (allowing laptops to seamlessly move between
+	  networks without changing their IP addresses).
+
+	  Saying Y to this option will produce two modules ( = code which can
+	  be inserted in and removed from the running kernel whenever you
+	  want). Most people won't need this and can say N.
+
+config NET_IPGRE_DEMUX
+	tristate "IP: GRE demultiplexer"
+	help
+	  This is helper module to demultiplex GRE packets on GRE version field criteria.
+	  Required by ip_gre and pptp modules.
+
+config NET_IP_TUNNEL
+	tristate
+	select DST_CACHE
+	select GRO_CELLS
+	default n
+
+config NET_IPGRE
+	tristate "IP: GRE tunnels over IP"
+	depends on (IPV6 || IPV6=n) && NET_IPGRE_DEMUX
+	select NET_IP_TUNNEL
+	help
+	  Tunneling means encapsulating data of one protocol type within
+	  another protocol and sending it over a channel that understands the
+	  encapsulating protocol. This particular tunneling driver implements
+	  GRE (Generic Routing Encapsulation) and at this time allows
+	  encapsulating of IPv4 or IPv6 over existing IPv4 infrastructure.
+	  This driver is useful if the other endpoint is a Cisco router: Cisco
+	  likes GRE much better than the other Linux tunneling driver ("IP
+	  tunneling" above). In addition, GRE allows multicast redistribution
+	  through the tunnel.
+
+config NET_IPGRE_BROADCAST
+	bool "IP: broadcast GRE over IP"
+	depends on IP_MULTICAST && NET_IPGRE
+	help
+	  One application of GRE/IP is to construct a broadcast WAN (Wide Area
+	  Network), which looks like a normal Ethernet LAN (Local Area
+	  Network), but can be distributed all over the Internet. If you want
+	  to do that, say Y here and to "IP multicast routing" below.
+
+config IP_MROUTE_COMMON
+	bool
+	depends on IP_MROUTE || IPV6_MROUTE
+
+config IP_MROUTE
+	bool "IP: multicast routing"
+	depends on IP_MULTICAST
+	select IP_MROUTE_COMMON
+	help
+	  This is used if you want your machine to act as a router for IP
+	  packets that have several destination addresses. It is needed on the
+	  MBONE, a high bandwidth network on top of the Internet which carries
+	  audio and video broadcasts. In order to do that, you would most
+	  likely run the program mrouted. If you haven't heard about it, you
+	  don't need it.
+
+config IP_MROUTE_MULTIPLE_TABLES
+	bool "IP: multicast policy routing"
+	depends on IP_MROUTE && IP_ADVANCED_ROUTER
+	select FIB_RULES
+	help
+	  Normally, a multicast router runs a userspace daemon and decides
+	  what to do with a multicast packet based on the source and
+	  destination addresses. If you say Y here, the multicast router
+	  will also be able to take interfaces and packet marks into
+	  account and run multiple instances of userspace daemons
+	  simultaneously, each one handling a single table.
+
+	  If unsure, say N.
+
+config IP_PIMSM_V1
+	bool "IP: PIM-SM version 1 support"
+	depends on IP_MROUTE
+	help
+	  Kernel side support for Sparse Mode PIM (Protocol Independent
+	  Multicast) version 1. This multicast routing protocol is used widely
+	  because Cisco supports it. You need special software to use it
+	  (pimd-v1). Please see <http://netweb.usc.edu/pim/> for more
+	  information about PIM.
+
+	  Say Y if you want to use PIM-SM v1. Note that you can say N here if
+	  you just want to use Dense Mode PIM.
+
+config IP_PIMSM_V2
+	bool "IP: PIM-SM version 2 support"
+	depends on IP_MROUTE
+	help
+	  Kernel side support for Sparse Mode PIM version 2. In order to use
+	  this, you need an experimental routing daemon supporting it (pimd or
+	  gated-5). This routing protocol is not used widely, so say N unless
+	  you want to play with it.
+
+config SYN_COOKIES
+	bool "IP: TCP syncookie support"
+	help
+	  Normal TCP/IP networking is open to an attack known as "SYN
+	  flooding". This denial-of-service attack prevents legitimate remote
+	  users from being able to connect to your computer during an ongoing
+	  attack and requires very little work from the attacker, who can
+	  operate from anywhere on the Internet.
+
+	  SYN cookies provide protection against this type of attack. If you
+	  say Y here, the TCP/IP stack will use a cryptographic challenge
+	  protocol known as "SYN cookies" to enable legitimate users to
+	  continue to connect, even when your machine is under attack. There
+	  is no need for the legitimate users to change their TCP/IP software;
+	  SYN cookies work transparently to them. For technical information
+	  about SYN cookies, check out <https://cr.yp.to/syncookies.html>.
+
+	  If you are SYN flooded, the source address reported by the kernel is
+	  likely to have been forged by the attacker; it is only reported as
+	  an aid in tracing the packets to their actual source and should not
+	  be taken as absolute truth.
+
+	  SYN cookies may prevent correct error reporting on clients when the
+	  server is really overloaded. If this happens frequently better turn
+	  them off.
+
+	  If you say Y here, you can disable SYN cookies at run time by
+	  saying Y to "/proc file system support" and
+	  "Sysctl support" below and executing the command
+
+	  echo 0 > /proc/sys/net/ipv4/tcp_syncookies
+
+	  after the /proc file system has been mounted.
+
+	  If unsure, say N.
+
+config NET_IPVTI
+	tristate "Virtual (secure) IP: tunneling"
+	depends on IPV6 || IPV6=n
+	select INET_TUNNEL
+	select NET_IP_TUNNEL
+	select XFRM
+	help
+	  Tunneling means encapsulating data of one protocol type within
+	  another protocol and sending it over a channel that understands the
+	  encapsulating protocol. This can be used with xfrm mode tunnel to give
+	  the notion of a secure tunnel for IPSEC and then use routing protocol
+	  on top.
+
+config NET_UDP_TUNNEL
+	tristate
+	select NET_IP_TUNNEL
+	default n
+
+config NET_FOU
+	tristate "IP: Foo (IP protocols) over UDP"
+	select NET_UDP_TUNNEL
+	help
+	  Foo over UDP allows any IP protocol to be directly encapsulated
+	  over UDP include tunnels (IPIP, GRE, SIT). By encapsulating in UDP
+	  network mechanisms and optimizations for UDP (such as ECMP
+	  and RSS) can be leveraged to provide better service.
+
+config NET_FOU_IP_TUNNELS
+	bool "IP: FOU encapsulation of IP tunnels"
+	depends on NET_IPIP || NET_IPGRE || IPV6_SIT
+	select NET_FOU
+	help
+	  Allow configuration of FOU or GUE encapsulation for IP tunnels.
+	  When this option is enabled IP tunnels can be configured to use
+	  FOU or GUE encapsulation.
+
+config INET_AH
+	tristate "IP: AH transformation"
+	select XFRM_AH
+	help
+	  Support for IPsec AH (Authentication Header).
+
+	  AH can be used with various authentication algorithms.  Besides
+	  enabling AH support itself, this option enables the generic
+	  implementations of the algorithms that RFC 8221 lists as MUST be
+	  implemented.  If you need any other algorithms, you'll need to enable
+	  them in the crypto API.  You should also enable accelerated
+	  implementations of any needed algorithms when available.
+
+	  If unsure, say Y.
+
+config INET_ESP
+	tristate "IP: ESP transformation"
+	select XFRM_ESP
+	help
+	  Support for IPsec ESP (Encapsulating Security Payload).
+
+	  ESP can be used with various encryption and authentication algorithms.
+	  Besides enabling ESP support itself, this option enables the generic
+	  implementations of the algorithms that RFC 8221 lists as MUST be
+	  implemented.  If you need any other algorithms, you'll need to enable
+	  them in the crypto API.  You should also enable accelerated
+	  implementations of any needed algorithms when available.
+
+	  If unsure, say Y.
+
+config INET_ESP_OFFLOAD
+	tristate "IP: ESP transformation offload"
+	depends on INET_ESP
+	select XFRM_OFFLOAD
+	default n
+	help
+	  Support for ESP transformation offload. This makes sense
+	  only if this system really does IPsec and want to do it
+	  with high throughput. A typical desktop system does not
+	  need it, even if it does IPsec.
+
+	  If unsure, say N.
+
+config INET_ESPINTCP
+	bool "IP: ESP in TCP encapsulation (RFC 8229)"
+	depends on XFRM && INET_ESP
+	select STREAM_PARSER
+	select NET_SOCK_MSG
+	select XFRM_ESPINTCP
+	help
+	  Support for RFC 8229 encapsulation of ESP and IKE over
+	  TCP/IPv4 sockets.
+
+	  If unsure, say N.
+
+config INET_IPCOMP
+	tristate "IP: IPComp transformation"
+	select INET_XFRM_TUNNEL
+	select XFRM_IPCOMP
+	help
+	  Support for IP Payload Compression Protocol (IPComp) (RFC3173),
+	  typically needed for IPsec.
+
+	  If unsure, say Y.
+
+config INET_TABLE_PERTURB_ORDER
+	int "INET: Source port perturbation table size (as power of 2)" if EXPERT
+	default 16
+	help
+	  Source port perturbation table size (as power of 2) for
+	  RFC 6056 3.3.4.  Algorithm 4: Double-Hash Port Selection Algorithm.
+
+	  The default is almost always what you want.
+	  Only change this if you know what you are doing.
+
+config INET_XFRM_TUNNEL
+	tristate
+	select INET_TUNNEL
+	default n
+
+config INET_TUNNEL
+	tristate
+	default n
+
+config INET_DIAG
+	tristate "INET: socket monitoring interface"
+	default y
+	help
+	  Support for INET (TCP, DCCP, etc) socket monitoring interface used by
+	  native Linux tools such as ss. ss is included in iproute2, currently
+	  downloadable at:
+
+	    http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2
+
+	  If unsure, say Y.
+
+config INET_TCP_DIAG
+	depends on INET_DIAG
+	def_tristate INET_DIAG
+
+config INET_UDP_DIAG
+	tristate "UDP: socket monitoring interface"
+	depends on INET_DIAG && (IPV6 || IPV6=n)
+	default n
+	help
+	  Support for UDP socket monitoring interface used by the ss tool.
+	  If unsure, say Y.
+
+config INET_RAW_DIAG
+	tristate "RAW: socket monitoring interface"
+	depends on INET_DIAG && (IPV6 || IPV6=n)
+	default n
+	help
+	  Support for RAW socket monitoring interface used by the ss tool.
+	  If unsure, say Y.
+
+config INET_DIAG_DESTROY
+	bool "INET: allow privileged process to administratively close sockets"
+	depends on INET_DIAG
+	default n
+	help
+	  Provides a SOCK_DESTROY operation that allows privileged processes
+	  (e.g., a connection manager or a network administration tool such as
+	  ss) to close sockets opened by other processes. Closing a socket in
+	  this way interrupts any blocking read/write/connect operations on
+	  the socket and causes future socket calls to behave as if the socket
+	  had been disconnected.
+	  If unsure, say N.
+
+menuconfig TCP_CONG_ADVANCED
+	bool "TCP: advanced congestion control"
+	help
+	  Support for selection of various TCP congestion control
+	  modules.
+
+	  Nearly all users can safely say no here, and a safe default
+	  selection will be made (CUBIC with new Reno as a fallback).
+
+	  If unsure, say N.
+
+if TCP_CONG_ADVANCED
+
+config TCP_CONG_BIC
+	tristate "Binary Increase Congestion (BIC) control"
+	default m
+	help
+	  BIC-TCP is a sender-side only change that ensures a linear RTT
+	  fairness under large windows while offering both scalability and
+	  bounded TCP-friendliness. The protocol combines two schemes
+	  called additive increase and binary search increase. When the
+	  congestion window is large, additive increase with a large
+	  increment ensures linear RTT fairness as well as good
+	  scalability. Under small congestion windows, binary search
+	  increase provides TCP friendliness.
+	  See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/
+
+config TCP_CONG_CUBIC
+	tristate "CUBIC TCP"
+	default y
+	help
+	  This is version 2.0 of BIC-TCP which uses a cubic growth function
+	  among other techniques.
+	  See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdf
+
+config TCP_CONG_WESTWOOD
+	tristate "TCP Westwood+"
+	default m
+	help
+	  TCP Westwood+ is a sender-side only modification of the TCP Reno
+	  protocol stack that optimizes the performance of TCP congestion
+	  control. It is based on end-to-end bandwidth estimation to set
+	  congestion window and slow start threshold after a congestion
+	  episode. Using this estimation, TCP Westwood+ adaptively sets a
+	  slow start threshold and a congestion window which takes into
+	  account the bandwidth used  at the time congestion is experienced.
+	  TCP Westwood+ significantly increases fairness wrt TCP Reno in
+	  wired networks and throughput over wireless links.
+
+config TCP_CONG_HTCP
+	tristate "H-TCP"
+	default m
+	help
+	  H-TCP is a send-side only modifications of the TCP Reno
+	  protocol stack that optimizes the performance of TCP
+	  congestion control for high speed network links. It uses a
+	  modeswitch to change the alpha and beta parameters of TCP Reno
+	  based on network conditions and in a way so as to be fair with
+	  other Reno and H-TCP flows.
+
+config TCP_CONG_HSTCP
+	tristate "High Speed TCP"
+	default n
+	help
+	  Sally Floyd's High Speed TCP (RFC 3649) congestion control.
+	  A modification to TCP's congestion control mechanism for use
+	  with large congestion windows. A table indicates how much to
+	  increase the congestion window by when an ACK is received.
+	  For more detail see https://www.icir.org/floyd/hstcp.html
+
+config TCP_CONG_HYBLA
+	tristate "TCP-Hybla congestion control algorithm"
+	default n
+	help
+	  TCP-Hybla is a sender-side only change that eliminates penalization of
+	  long-RTT, large-bandwidth connections, like when satellite legs are
+	  involved, especially when sharing a common bottleneck with normal
+	  terrestrial connections.
+
+config TCP_CONG_VEGAS
+	tristate "TCP Vegas"
+	default n
+	help
+	  TCP Vegas is a sender-side only change to TCP that anticipates
+	  the onset of congestion by estimating the bandwidth. TCP Vegas
+	  adjusts the sending rate by modifying the congestion
+	  window. TCP Vegas should provide less packet loss, but it is
+	  not as aggressive as TCP Reno.
+
+config TCP_CONG_NV
+	tristate "TCP NV"
+	default n
+	help
+	  TCP NV is a follow up to TCP Vegas. It has been modified to deal with
+	  10G networks, measurement noise introduced by LRO, GRO and interrupt
+	  coalescence. In addition, it will decrease its cwnd multiplicatively
+	  instead of linearly.
+
+	  Note that in general congestion avoidance (cwnd decreased when # packets
+	  queued grows) cannot coexist with congestion control (cwnd decreased only
+	  when there is packet loss) due to fairness issues. One scenario when they
+	  can coexist safely is when the CA flows have RTTs << CC flows RTTs.
+
+	  For further details see http://www.brakmo.org/networking/tcp-nv/
+
+config TCP_CONG_SCALABLE
+	tristate "Scalable TCP"
+	default n
+	help
+	  Scalable TCP is a sender-side only change to TCP which uses a
+	  MIMD congestion control algorithm which has some nice scaling
+	  properties, though is known to have fairness issues.
+	  See http://www.deneholme.net/tom/scalable/
+
+config TCP_CONG_LP
+	tristate "TCP Low Priority"
+	default n
+	help
+	  TCP Low Priority (TCP-LP), a distributed algorithm whose goal is
+	  to utilize only the excess network bandwidth as compared to the
+	  ``fair share`` of bandwidth as targeted by TCP.
+	  See http://www-ece.rice.edu/networks/TCP-LP/
+
+config TCP_CONG_VENO
+	tristate "TCP Veno"
+	default n
+	help
+	  TCP Veno is a sender-side only enhancement of TCP to obtain better
+	  throughput over wireless networks. TCP Veno makes use of state
+	  distinguishing to circumvent the difficult judgment of the packet loss
+	  type. TCP Veno cuts down less congestion window in response to random
+	  loss packets.
+	  See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
+
+config TCP_CONG_YEAH
+	tristate "YeAH TCP"
+	select TCP_CONG_VEGAS
+	default n
+	help
+	  YeAH-TCP is a sender-side high-speed enabled TCP congestion control
+	  algorithm, which uses a mixed loss/delay approach to compute the
+	  congestion window. It's design goals target high efficiency,
+	  internal, RTT and Reno fairness, resilience to link loss while
+	  keeping network elements load as low as possible.
+
+	  For further details look here:
+	    http://wil.cs.caltech.edu/pfldnet2007/paper/YeAH_TCP.pdf
+
+config TCP_CONG_ILLINOIS
+	tristate "TCP Illinois"
+	default n
+	help
+	  TCP-Illinois is a sender-side modification of TCP Reno for
+	  high speed long delay links. It uses round-trip-time to
+	  adjust the alpha and beta parameters to achieve a higher average
+	  throughput and maintain fairness.
+
+	  For further details see:
+	    http://www.ews.uiuc.edu/~shaoliu/tcpillinois/index.html
+
+config TCP_CONG_DCTCP
+	tristate "DataCenter TCP (DCTCP)"
+	default n
+	help
+	  DCTCP leverages Explicit Congestion Notification (ECN) in the network to
+	  provide multi-bit feedback to the end hosts. It is designed to provide:
+
+	  - High burst tolerance (incast due to partition/aggregate),
+	  - Low latency (short flows, queries),
+	  - High throughput (continuous data updates, large file transfers) with
+	    commodity, shallow-buffered switches.
+
+	  All switches in the data center network running DCTCP must support
+	  ECN marking and be configured for marking when reaching defined switch
+	  buffer thresholds. The default ECN marking threshold heuristic for
+	  DCTCP on switches is 20 packets (30KB) at 1Gbps, and 65 packets
+	  (~100KB) at 10Gbps, but might need further careful tweaking.
+
+	  For further details see:
+	    http://simula.stanford.edu/~alizade/Site/DCTCP_files/dctcp-final.pdf
+
+config TCP_CONG_CDG
+	tristate "CAIA Delay-Gradient (CDG)"
+	default n
+	help
+	  CAIA Delay-Gradient (CDG) is a TCP congestion control that modifies
+	  the TCP sender in order to:
+
+	  o Use the delay gradient as a congestion signal.
+	  o Back off with an average probability that is independent of the RTT.
+	  o Coexist with flows that use loss-based congestion control.
+	  o Tolerate packet loss unrelated to congestion.
+
+	  For further details see:
+	    D.A. Hayes and G. Armitage. "Revisiting TCP congestion control using
+	    delay gradients." In Networking 2011. Preprint: http://goo.gl/No3vdg
+
+config TCP_CONG_BBR
+	tristate "BBR TCP"
+	default n
+	help
+
+	  BBR (Bottleneck Bandwidth and RTT) TCP congestion control aims to
+	  maximize network utilization and minimize queues. It builds an explicit
+	  model of the bottleneck delivery rate and path round-trip propagation
+	  delay. It tolerates packet loss and delay unrelated to congestion. It
+	  can operate over LAN, WAN, cellular, wifi, or cable modem links. It can
+	  coexist with flows that use loss-based congestion control, and can
+	  operate with shallow buffers, deep buffers, bufferbloat, policers, or
+	  AQM schemes that do not provide a delay signal. It requires the fq
+	  ("Fair Queue") pacing packet scheduler.
+
+choice
+	prompt "Default TCP congestion control"
+	default DEFAULT_CUBIC
+	help
+	  Select the TCP congestion control that will be used by default
+	  for all connections.
+
+	config DEFAULT_BIC
+		bool "Bic" if TCP_CONG_BIC=y
+
+	config DEFAULT_CUBIC
+		bool "Cubic" if TCP_CONG_CUBIC=y
+
+	config DEFAULT_HTCP
+		bool "Htcp" if TCP_CONG_HTCP=y
+
+	config DEFAULT_HYBLA
+		bool "Hybla" if TCP_CONG_HYBLA=y
+
+	config DEFAULT_VEGAS
+		bool "Vegas" if TCP_CONG_VEGAS=y
+
+	config DEFAULT_VENO
+		bool "Veno" if TCP_CONG_VENO=y
+
+	config DEFAULT_WESTWOOD
+		bool "Westwood" if TCP_CONG_WESTWOOD=y
+
+	config DEFAULT_DCTCP
+		bool "DCTCP" if TCP_CONG_DCTCP=y
+
+	config DEFAULT_CDG
+		bool "CDG" if TCP_CONG_CDG=y
+
+	config DEFAULT_BBR
+		bool "BBR" if TCP_CONG_BBR=y
+
+	config DEFAULT_RENO
+		bool "Reno"
+endchoice
+
+endif
+
+config TCP_CONG_CUBIC
+	tristate
+	depends on !TCP_CONG_ADVANCED
+	default y
+
+config DEFAULT_TCP_CONG
+	string
+	default "bic" if DEFAULT_BIC
+	default "cubic" if DEFAULT_CUBIC
+	default "htcp" if DEFAULT_HTCP
+	default "hybla" if DEFAULT_HYBLA
+	default "vegas" if DEFAULT_VEGAS
+	default "westwood" if DEFAULT_WESTWOOD
+	default "veno" if DEFAULT_VENO
+	default "reno" if DEFAULT_RENO
+	default "dctcp" if DEFAULT_DCTCP
+	default "cdg" if DEFAULT_CDG
+	default "bbr" if DEFAULT_BBR
+	default "cubic"
+
+config TCP_MD5SIG
+	bool "TCP: MD5 Signature Option support (RFC2385)"
+	select CRYPTO
+	select CRYPTO_MD5
+	help
+	  RFC2385 specifies a method of giving MD5 protection to TCP sessions.
+	  Its main (only?) use is to protect BGP sessions between core routers
+	  on the Internet.
+
+	  If unsure, say N.