Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 237 insertions, 0 deletions

diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
new file mode 100644
index 000000000..f620acd2a
--- /dev/null
+++ b/net/wireless/Kconfig
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config WIRELESS_EXT
+	bool
+
+config WEXT_CORE
+	def_bool y
+	depends on CFG80211_WEXT || WIRELESS_EXT
+
+config WEXT_PROC
+	def_bool y
+	depends on PROC_FS
+	depends on WEXT_CORE
+
+config WEXT_SPY
+	bool
+
+config WEXT_PRIV
+	bool
+
+config CFG80211
+	tristate "cfg80211 - wireless configuration API"
+	depends on RFKILL || !RFKILL
+	select FW_LOADER
+	select CRC32
+	# may need to update this when certificates are changed and are
+	# using a different algorithm, though right now they shouldn't
+	# (this is here rather than below to allow it to be a module)
+	select CRYPTO_SHA256 if CFG80211_USE_KERNEL_REGDB_KEYS
+	help
+	  cfg80211 is the Linux wireless LAN (802.11) configuration API.
+	  Enable this if you have a wireless device.
+
+	  For more information refer to documentation on the wireless wiki:
+
+	  https://wireless.wiki.kernel.org/en/developers/Documentation/cfg80211
+
+	  When built as a module it will be called cfg80211.
+
+if CFG80211
+
+config NL80211_TESTMODE
+	bool "nl80211 testmode command"
+	help
+	  The nl80211 testmode command helps implementing things like
+	  factory calibration or validation tools for wireless chips.
+
+	  Select this option ONLY for kernels that are specifically
+	  built for such purposes.
+
+	  Debugging tools that are supposed to end up in the hands of
+	  users should better be implemented with debugfs.
+
+	  Say N.
+
+config CFG80211_DEVELOPER_WARNINGS
+	bool "enable developer warnings"
+	default n
+	help
+	  This option enables some additional warnings that help
+	  cfg80211 developers and driver developers, but beware that
+	  they can also trigger due to races with userspace.
+
+	  For example, when a driver reports that it was disconnected
+	  from the AP, but the user disconnects manually at the same
+	  time, the warning might trigger spuriously due to races.
+
+	  Say Y only if you are developing cfg80211 or a driver based
+	  on it (or mac80211).
+
+
+config CFG80211_CERTIFICATION_ONUS
+	bool "cfg80211 certification onus"
+	depends on EXPERT
+	default n
+	help
+	  You should disable this option unless you are both capable
+	  and willing to ensure your system will remain regulatory
+	  compliant with the features available under this option.
+	  Some options may still be under heavy development and
+	  for whatever reason regulatory compliance has not or
+	  cannot yet be verified. Regulatory verification may at
+	  times only be possible until you have the final system
+	  in place.
+
+	  This option should only be enabled by system integrators
+	  or distributions that have done work necessary to ensure
+	  regulatory certification on the system with the enabled
+	  features. Alternatively you can enable this option if
+	  you are a wireless researcher and are working in a controlled
+	  and approved environment by your local regulatory agency.
+
+config CFG80211_REQUIRE_SIGNED_REGDB
+	bool "require regdb signature" if CFG80211_CERTIFICATION_ONUS
+	default y
+	select SYSTEM_DATA_VERIFICATION
+	help
+	  Require that in addition to the "regulatory.db" file a
+	  "regulatory.db.p7s" can be loaded with a valid PKCS#7
+	  signature for the regulatory.db file made by one of the
+	  keys in the certs/ directory.
+
+config CFG80211_USE_KERNEL_REGDB_KEYS
+	bool "allow regdb keys shipped with the kernel" if CFG80211_CERTIFICATION_ONUS
+	default y
+	depends on CFG80211_REQUIRE_SIGNED_REGDB
+	help
+	  Allow the regulatory database to be signed by one of the keys for
+	  which certificates are part of the kernel sources
+	  (in net/wireless/certs/).
+
+	  This is currently only Seth Forshee's key, who is the regulatory
+	  database maintainer.
+
+config CFG80211_EXTRA_REGDB_KEYDIR
+	string "additional regdb key directory" if CFG80211_CERTIFICATION_ONUS
+	depends on CFG80211_REQUIRE_SIGNED_REGDB
+	help
+	  If selected, point to a directory with DER-encoded X.509
+	  certificates like in the kernel sources (net/wireless/certs/)
+	  that shall be accepted for a signed regulatory database.
+
+	  Note that you need to also select the correct CRYPTO_<hash> modules
+	  for your certificates, and if cfg80211 is built-in they also must be.
+
+config CFG80211_REG_CELLULAR_HINTS
+	bool "cfg80211 regulatory support for cellular base station hints"
+	depends on CFG80211_CERTIFICATION_ONUS
+	help
+	  This option enables support for parsing regulatory hints
+	  from cellular base stations. If enabled and at least one driver
+	  claims support for parsing cellular base station hints the
+	  regulatory core will allow and parse these regulatory hints.
+	  The regulatory core will only apply these regulatory hints on
+	  drivers that support this feature. You should only enable this
+	  feature if you have tested and validated this feature on your
+	  systems.
+
+config CFG80211_REG_RELAX_NO_IR
+	bool "cfg80211 support for NO_IR relaxation"
+	depends on CFG80211_CERTIFICATION_ONUS
+	help
+	 This option enables support for relaxation of the NO_IR flag for
+	 situations that certain regulatory bodies have provided clarifications
+	 on how relaxation can occur. This feature has an inherent dependency on
+	 userspace features which must have been properly tested and as such is
+	 not enabled by default.
+
+	 A relaxation feature example is allowing the operation of a P2P group
+	 owner (GO) on channels marked with NO_IR if there is an additional BSS
+	 interface which associated to an AP which userspace assumes or confirms
+	 to be an authorized master, i.e., with radar detection support and DFS
+	 capabilities. However, note that in order to not create daisy chain
+	 scenarios, this relaxation is not allowed in cases where the BSS client
+	 is associated to P2P GO and in addition the P2P GO instantiated on
+	 a channel due to this relaxation should not allow connection from
+	 non P2P clients.
+
+	 The regulatory core will apply these relaxations only for drivers that
+	 support this feature by declaring the appropriate channel flags and
+	 capabilities in their registration flow.
+
+config CFG80211_DEFAULT_PS
+	bool "enable powersave by default"
+	default y
+	help
+	  This option enables powersave mode by default.
+
+	  If this causes your applications to misbehave you should fix your
+	  applications instead -- they need to register their network
+	  latency requirement, see Documentation/power/pm_qos_interface.rst.
+
+config CFG80211_DEBUGFS
+	bool "cfg80211 DebugFS entries"
+	depends on DEBUG_FS
+	help
+	  You can enable this if you want debugfs entries for cfg80211.
+
+	  If unsure, say N.
+
+config CFG80211_CRDA_SUPPORT
+	bool "support CRDA" if EXPERT
+	default y
+	help
+	  You should enable this option unless you know for sure you have no
+	  need for it, for example when using the regulatory database loaded as
+	  a firmware file.
+
+	  If unsure, say Y.
+
+config CFG80211_WEXT
+	bool "cfg80211 wireless extensions compatibility" if !CFG80211_WEXT_EXPORT
+	select WEXT_CORE
+	default y if CFG80211_WEXT_EXPORT
+	help
+	  Enable this option if you need old userspace for wireless
+	  extensions with cfg80211-based drivers.
+
+config CFG80211_WEXT_EXPORT
+	bool
+	help
+	  Drivers should select this option if they require cfg80211's
+	  wext compatibility symbols to be exported.
+
+endif # CFG80211
+
+config LIB80211
+	tristate
+	default n
+	help
+	  This options enables a library of common routines used
+	  by IEEE802.11 wireless LAN drivers.
+
+	  Drivers should select this themselves if needed.
+
+config LIB80211_CRYPT_WEP
+	tristate
+	select CRYPTO_LIB_ARC4
+
+config LIB80211_CRYPT_CCMP
+	tristate
+	select CRYPTO
+	select CRYPTO_AES
+	select CRYPTO_CCM
+
+config LIB80211_CRYPT_TKIP
+	tristate
+	select CRYPTO_LIB_ARC4
+
+config LIB80211_DEBUG
+	bool "lib80211 debugging messages"
+	depends on LIB80211
+	default n
+	help
+	  You can enable this if you want verbose debugging messages
+	  from lib80211.
+
+	  If unsure, say N.