Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 438 insertions, 0 deletions

diff --git a/samples/bpf/do_hbm_test.sh b/samples/bpf/do_hbm_test.sh
new file mode 100755
index 000000000..38e459935
--- /dev/null
+++ b/samples/bpf/do_hbm_test.sh
@@ -0,0 +1,438 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2019 Facebook
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of version 2 of the GNU General Public
+# License as published by the Free Software Foundation.
+
+Usage() {
+  echo "Script for testing HBM (Host Bandwidth Manager) framework."
+  echo "It creates a cgroup to use for testing and load a BPF program to limit"
+  echo "egress or ingress bandwidth. It then uses iperf3 or netperf to create"
+  echo "loads. The output is the goodput in Mbps (unless -D was used)."
+  echo ""
+  echo "USAGE: $name [out] [-b=<prog>|--bpf=<prog>] [-c=<cc>|--cc=<cc>]"
+  echo "             [-D] [-d=<delay>|--delay=<delay>] [--debug] [-E] [--edt]"
+  echo "             [-f=<#flows>|--flows=<#flows>] [-h] [-i=<id>|--id=<id >]"
+  echo "             [-l] [-N] [--no_cn] [-p=<port>|--port=<port>] [-P]"
+  echo "             [-q=<qdisc>] [-R] [-s=<server>|--server=<server]"
+  echo "             [-S|--stats] -t=<time>|--time=<time>] [-w] [cubic|dctcp]"
+  echo "  Where:"
+  echo "    out               egress (default)"
+  echo "    -b or --bpf       BPF program filename to load and attach."
+  echo "                      Default is hbm_out_kern.o for egress,"
+  echo "    -c or -cc         TCP congestion control (cubic or dctcp)"
+  echo "    --debug           print BPF trace buffer"
+  echo "    -d or --delay     add a delay in ms using netem"
+  echo "    -D                In addition to the goodput in Mbps, it also outputs"
+  echo "                      other detailed information. This information is"
+  echo "                      test dependent (i.e. iperf3 or netperf)."
+  echo "    -E                enable ECN (not required for dctcp)"
+  echo "    --edt             use fq's Earliest Departure Time (requires fq)"
+  echo "    -f or --flows     number of concurrent flows (default=1)"
+  echo "    -i or --id        cgroup id (an integer, default is 1)"
+  echo "    -N                use netperf instead of iperf3"
+  echo "    --no_cn           Do not return CN notifications"
+  echo "    -l                do not limit flows using loopback"
+  echo "    -h                Help"
+  echo "    -p or --port      iperf3 port (default is 5201)"
+  echo "    -P                use an iperf3 instance for each flow"
+  echo "    -q                use the specified qdisc"
+  echo "    -r or --rate      rate in Mbps (default 1s 1Gbps)"
+  echo "    -R                Use TCP_RR for netperf. 1st flow has req"
+  echo "                      size of 10KB, rest of 1MB. Reply in all"
+  echo "                      cases is 1 byte."
+  echo "                      More detailed output for each flow can be found"
+  echo "                      in the files netperf.<cg>.<flow>, where <cg> is the"
+  echo "                      cgroup id as specified with the -i flag, and <flow>"
+  echo "                      is the flow id starting at 1 and increasing by 1 for"
+  echo "                      flow (as specified by -f)."
+  echo "    -s or --server    hostname of netperf server. Used to create netperf"
+  echo "                      test traffic between to hosts (default is within host)"
+  echo "                      netserver must be running on the host."
+  echo "    -S or --stats     whether to update hbm stats (default is yes)."
+  echo "    -t or --time      duration of iperf3 in seconds (default=5)"
+  echo "    -w                Work conserving flag. cgroup can increase its"
+  echo "                      bandwidth beyond the rate limit specified"
+  echo "                      while there is available bandwidth. Current"
+  echo "                      implementation assumes there is only one NIC"
+  echo "                      (eth0), but can be extended to support multiple"
+  echo "                       NICs."
+  echo "    cubic or dctcp    specify which TCP CC to use"
+  echo " "
+  exit
+}
+
+#set -x
+
+debug_flag=0
+args="$@"
+name="$0"
+netem=0
+cc=x
+dir="-o"
+dir_name="out"
+dur=5
+flows=1
+id=1
+prog=""
+port=5201
+rate=1000
+multi_iperf=0
+flow_cnt=1
+use_netperf=0
+rr=0
+ecn=0
+details=0
+server=""
+qdisc=""
+flags=""
+do_stats=0
+
+BPFFS=/sys/fs/bpf
+function config_bpffs () {
+	if mount | grep $BPFFS > /dev/null; then
+		echo "bpffs already mounted"
+	else
+		echo "bpffs not mounted. Mounting..."
+		mount -t bpf none $BPFFS
+	fi
+}
+
+function start_hbm () {
+  rm -f hbm.out
+  echo "./hbm $dir -n $id -r $rate -t $dur $flags $dbg $prog" > hbm.out
+  echo " " >> hbm.out
+  ./hbm $dir -n $id -r $rate -t $dur $flags $dbg $prog >> hbm.out 2>&1  &
+  echo $!
+}
+
+processArgs () {
+  for i in $args ; do
+    case $i in
+    # Support for upcomming ingress rate limiting
+    #in)         # support for upcoming ingress rate limiting
+    #  dir="-i"
+    #  dir_name="in"
+    #  ;;
+    out)
+      dir="-o"
+      dir_name="out"
+      ;;
+    -b=*|--bpf=*)
+      prog="${i#*=}"
+      ;;
+    -c=*|--cc=*)
+      cc="${i#*=}"
+      ;;
+    --no_cn)
+      flags="$flags --no_cn"
+      ;;
+    --debug)
+      flags="$flags -d"
+      debug_flag=1
+      ;;
+    -d=*|--delay=*)
+      netem="${i#*=}"
+      ;;
+    -D)
+      details=1
+      ;;
+    -E)
+      ecn=1
+      ;;
+    --edt)
+      flags="$flags --edt"
+      qdisc="fq"
+     ;;
+    -f=*|--flows=*)
+      flows="${i#*=}"
+      ;;
+    -i=*|--id=*)
+      id="${i#*=}"
+      ;;
+    -l)
+      flags="$flags -l"
+      ;;
+    -N)
+      use_netperf=1
+      ;;
+    -p=*|--port=*)
+      port="${i#*=}"
+      ;;
+    -P)
+      multi_iperf=1
+      ;;
+    -q=*)
+      qdisc="${i#*=}"
+      ;;
+    -r=*|--rate=*)
+      rate="${i#*=}"
+      ;;
+    -R)
+      rr=1
+      ;;
+    -s=*|--server=*)
+      server="${i#*=}"
+      ;;
+    -S|--stats)
+      flags="$flags -s"
+      do_stats=1
+      ;;
+    -t=*|--time=*)
+      dur="${i#*=}"
+      ;;
+    -w)
+      flags="$flags -w"
+      ;;
+    cubic)
+      cc=cubic
+      ;;
+    dctcp)
+      cc=dctcp
+      ;;
+    *)
+      echo "Unknown arg:$i"
+      Usage
+      ;;
+    esac
+  done
+}
+
+processArgs
+config_bpffs
+
+if [ $debug_flag -eq 1 ] ; then
+  rm -f hbm_out.log
+fi
+
+hbm_pid=$(start_hbm)
+usleep 100000
+
+host=`hostname`
+cg_base_dir=/sys/fs/cgroup/unified
+cg_dir="$cg_base_dir/cgroup-test-work-dir/hbm$id"
+
+echo $$ >> $cg_dir/cgroup.procs
+
+ulimit -l unlimited
+
+rm -f ss.out
+rm -f hbm.[0-9]*.$dir_name
+if [ $ecn -ne 0 ] ; then
+  sysctl -w -q -n net.ipv4.tcp_ecn=1
+fi
+
+if [ $use_netperf -eq 0 ] ; then
+  cur_cc=`sysctl -n net.ipv4.tcp_congestion_control`
+  if [ "$cc" != "x" ] ; then
+    sysctl -w -q -n net.ipv4.tcp_congestion_control=$cc
+  fi
+fi
+
+if [ "$netem" -ne "0" ] ; then
+  if [ "$qdisc" != "" ] ; then
+    echo "WARNING: Ignoring -q options because -d option used"
+  fi
+  tc qdisc del dev lo root > /dev/null 2>&1
+  tc qdisc add dev lo root netem delay $netem\ms > /dev/null 2>&1
+elif [ "$qdisc" != "" ] ; then
+  tc qdisc del dev eth0 root > /dev/null 2>&1
+  tc qdisc add dev eth0 root $qdisc > /dev/null 2>&1
+fi
+
+n=0
+m=$[$dur * 5]
+hn="::1"
+if [ $use_netperf -ne 0 ] ; then
+  if [ "$server" != "" ] ; then
+    hn=$server
+  fi
+fi
+
+( ping6 -i 0.2 -c $m $hn > ping.out 2>&1 ) &
+
+if [ $use_netperf -ne 0 ] ; then
+  begNetserverPid=`ps ax | grep netserver | grep --invert-match "grep" | \
+                   awk '{ print $1 }'`
+  if [ "$begNetserverPid" == "" ] ; then
+    if [ "$server" == "" ] ; then
+      ( ./netserver > /dev/null 2>&1) &
+      usleep 100000
+    fi
+  fi
+  flow_cnt=1
+  if [ "$server" == "" ] ; then
+    np_server=$host
+  else
+    np_server=$server
+  fi
+  if [ "$cc" == "x" ] ; then
+    np_cc=""
+  else
+    np_cc="-K $cc,$cc"
+  fi
+  replySize=1
+  while [ $flow_cnt -le $flows ] ; do
+    if [ $rr -ne 0 ] ; then
+      reqSize=1M
+      if [ $flow_cnt -eq 1 ] ; then
+        reqSize=10K
+      fi
+      if [ "$dir" == "-i" ] ; then
+        replySize=$reqSize
+        reqSize=1
+      fi
+      ( ./netperf -H $np_server -l $dur -f m -j -t TCP_RR  -- -r $reqSize,$replySize $np_cc -k P50_lATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,REMOTE_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,LOCAL_RECV_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) &
+    else
+      if [ "$dir" == "-i" ] ; then
+        ( ./netperf -H $np_server -l $dur -f m -j -t TCP_RR -- -r 1,10M $np_cc -k P50_LATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,REMOTE_TRANSPORT_RETRANS,REMOTE_SEND_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) &
+      else
+        ( ./netperf -H $np_server -l $dur -f m -j -t TCP_STREAM -- $np_cc -k P50_lATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) &
+      fi
+    fi
+    flow_cnt=$[flow_cnt+1]
+  done
+
+# sleep for duration of test (plus some buffer)
+  n=$[dur+2]
+  sleep $n
+
+# force graceful termination of netperf
+  pids=`pgrep netperf`
+  for p in $pids ; do
+    kill -SIGALRM $p
+  done
+
+  flow_cnt=1
+  rate=0
+  if [ $details -ne 0 ] ; then
+    echo ""
+    echo "Details for HBM in cgroup $id"
+    if [ $do_stats -eq 1 ] ; then
+      if [ -e hbm.$id.$dir_name ] ; then
+        cat hbm.$id.$dir_name
+      fi
+    fi
+  fi
+  while [ $flow_cnt -le $flows ] ; do
+    if [ "$dir" == "-i" ] ; then
+      r=`cat netperf.$id.$flow_cnt | grep -o "REMOTE_SEND_THROUGHPUT=[0-9]*" | grep -o "[0-9]*"`
+    else
+      r=`cat netperf.$id.$flow_cnt | grep -o "LOCAL_SEND_THROUGHPUT=[0-9]*" | grep -o "[0-9]*"`
+    fi
+    echo "rate for flow $flow_cnt: $r"
+    rate=$[rate+r]
+    if [ $details -ne 0 ] ; then
+      echo "-----"
+      echo "Details for cgroup $id, flow $flow_cnt"
+      cat netperf.$id.$flow_cnt
+    fi
+    flow_cnt=$[flow_cnt+1]
+  done
+  if [ $details -ne 0 ] ; then
+    echo ""
+    delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"`
+    echo "PING AVG DELAY:$delay"
+    echo "AGGREGATE_GOODPUT:$rate"
+  else
+    echo $rate
+  fi
+elif [ $multi_iperf -eq 0 ] ; then
+  (iperf3 -s -p $port -1 > /dev/null 2>&1) &
+  usleep 100000
+  iperf3 -c $host -p $port -i 0 -P $flows -f m -t $dur > iperf.$id
+  rates=`grep receiver iperf.$id | grep -o "[0-9.]* Mbits" | grep -o "^[0-9]*"`
+  rate=`echo $rates | grep -o "[0-9]*$"`
+
+  if [ $details -ne 0 ] ; then
+    echo ""
+    echo "Details for HBM in cgroup $id"
+    if [ $do_stats -eq 1 ] ; then
+      if [ -e hbm.$id.$dir_name ] ; then
+        cat hbm.$id.$dir_name
+      fi
+    fi
+    delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"`
+    echo "PING AVG DELAY:$delay"
+    echo "AGGREGATE_GOODPUT:$rate"
+  else
+    echo $rate
+  fi
+else
+  flow_cnt=1
+  while [ $flow_cnt -le $flows ] ; do
+    (iperf3 -s -p $port -1 > /dev/null 2>&1) &
+    ( iperf3 -c $host -p $port -i 0 -P 1 -f m -t $dur | grep receiver | grep -o "[0-9.]* Mbits" | grep -o "^[0-9]*" | grep -o "[0-9]*$" > iperf3.$id.$flow_cnt ) &
+    port=$[port+1]
+    flow_cnt=$[flow_cnt+1]
+  done
+  n=$[dur+1]
+  sleep $n
+  flow_cnt=1
+  rate=0
+  if [ $details -ne 0 ] ; then
+    echo ""
+    echo "Details for HBM in cgroup $id"
+    if [ $do_stats -eq 1 ] ; then
+      if [ -e hbm.$id.$dir_name ] ; then
+        cat hbm.$id.$dir_name
+      fi
+    fi
+  fi
+
+  while [ $flow_cnt -le $flows ] ; do
+    r=`cat iperf3.$id.$flow_cnt`
+#    echo "rate for flow $flow_cnt: $r"
+  if [ $details -ne 0 ] ; then
+    echo "Rate for cgroup $id, flow $flow_cnt LOCAL_SEND_THROUGHPUT=$r"
+  fi
+    rate=$[rate+r]
+    flow_cnt=$[flow_cnt+1]
+  done
+  if [ $details -ne 0 ] ; then
+    delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"`
+    echo "PING AVG DELAY:$delay"
+    echo "AGGREGATE_GOODPUT:$rate"
+  else
+    echo $rate
+  fi
+fi
+
+if [ $use_netperf -eq 0 ] ; then
+  sysctl -w -q -n net.ipv4.tcp_congestion_control=$cur_cc
+fi
+if [ $ecn -ne 0 ] ; then
+  sysctl -w -q -n net.ipv4.tcp_ecn=0
+fi
+if [ "$netem" -ne "0" ] ; then
+  tc qdisc del dev lo root > /dev/null 2>&1
+fi
+if [ "$qdisc" != "" ] ; then
+  tc qdisc del dev eth0 root > /dev/null 2>&1
+fi
+sleep 2
+
+hbmPid=`ps ax | grep "hbm " | grep --invert-match "grep" | awk '{ print $1 }'`
+if [ "$hbmPid" == "$hbm_pid" ] ; then
+  kill $hbm_pid
+fi
+
+sleep 1
+
+# Detach any pinned BPF programs that may have lingered
+rm -rf $BPFFS/hbm*
+
+if [ $use_netperf -ne 0 ] ; then
+  if [ "$server" == "" ] ; then
+    if [ "$begNetserverPid" == "" ] ; then
+      netserverPid=`ps ax | grep netserver | grep --invert-match "grep" | awk '{ print $1 }'`
+      if [ "$netserverPid" != "" ] ; then
+        kill $netserverPid
+      fi
+    fi
+  fi
+fi
+exit