Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 177 insertions, 0 deletions

diff --git a/samples/bpf/tc_l2_redirect.sh b/samples/bpf/tc_l2_redirect.sh
new file mode 100755
index 000000000..a28a8fc99
--- /dev/null
+++ b/samples/bpf/tc_l2_redirect.sh
@@ -0,0 +1,177 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+[[ -z $TC ]] && TC='tc'
+[[ -z $IP ]] && IP='ip'
+
+REDIRECT_USER='./tc_l2_redirect'
+REDIRECT_BPF='./tc_l2_redirect_kern.o'
+
+RP_FILTER=$(< /proc/sys/net/ipv4/conf/all/rp_filter)
+IPV6_DISABLED=$(< /proc/sys/net/ipv6/conf/all/disable_ipv6)
+IPV6_FORWARDING=$(< /proc/sys/net/ipv6/conf/all/forwarding)
+
+function config_common {
+	local tun_type=$1
+
+	$IP netns add ns1
+	$IP netns add ns2
+	$IP link add ve1 type veth peer name vens1
+	$IP link add ve2 type veth peer name vens2
+	$IP link set dev ve1 up
+	$IP link set dev ve2 up
+	$IP link set dev ve1 mtu 1500
+	$IP link set dev ve2 mtu 1500
+	$IP link set dev vens1 netns ns1
+	$IP link set dev vens2 netns ns2
+
+	$IP -n ns1 link set dev lo up
+	$IP -n ns1 link set dev vens1 up
+	$IP -n ns1 addr add 10.1.1.101/24 dev vens1
+	$IP -n ns1 addr add 2401:db01::65/64 dev vens1 nodad
+	$IP -n ns1 route add default via 10.1.1.1 dev vens1
+	$IP -n ns1 route add default via 2401:db01::1 dev vens1
+
+	$IP -n ns2 link set dev lo up
+	$IP -n ns2 link set dev vens2 up
+	$IP -n ns2 addr add 10.2.1.102/24 dev vens2
+	$IP -n ns2 addr add 2401:db02::66/64 dev vens2 nodad
+	$IP -n ns2 addr add 10.10.1.102 dev lo
+	$IP -n ns2 addr add 2401:face::66/64 dev lo nodad
+	$IP -n ns2 link add ipt2 type ipip local 10.2.1.102 remote 10.2.1.1
+	$IP -n ns2 link add ip6t2 type ip6tnl mode any local 2401:db02::66 remote 2401:db02::1
+	$IP -n ns2 link set dev ipt2 up
+	$IP -n ns2 link set dev ip6t2 up
+	$IP netns exec ns2 $TC qdisc add dev vens2 clsact
+	$IP netns exec ns2 $TC filter add dev vens2 ingress bpf da obj $REDIRECT_BPF sec drop_non_tun_vip
+	if [[ $tun_type == "ipip" ]]; then
+		$IP -n ns2 route add 10.1.1.0/24 dev ipt2
+		$IP netns exec ns2 sysctl -q -w net.ipv4.conf.all.rp_filter=0
+		$IP netns exec ns2 sysctl -q -w net.ipv4.conf.ipt2.rp_filter=0
+	else
+		$IP -n ns2 route add 10.1.1.0/24 dev ip6t2
+		$IP -n ns2 route add 2401:db01::/64 dev ip6t2
+		$IP netns exec ns2 sysctl -q -w net.ipv4.conf.all.rp_filter=0
+		$IP netns exec ns2 sysctl -q -w net.ipv4.conf.ip6t2.rp_filter=0
+	fi
+
+	$IP addr add 10.1.1.1/24 dev ve1
+	$IP addr add 2401:db01::1/64 dev ve1 nodad
+	$IP addr add 10.2.1.1/24 dev ve2
+	$IP addr add 2401:db02::1/64 dev ve2 nodad
+
+	$TC qdisc add dev ve2 clsact
+	$TC filter add dev ve2 ingress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_forward
+
+	sysctl -q -w net.ipv4.conf.all.rp_filter=0
+	sysctl -q -w net.ipv6.conf.all.forwarding=1
+	sysctl -q -w net.ipv6.conf.all.disable_ipv6=0
+}
+
+function cleanup {
+	set +e
+	[[ -z $DEBUG ]] || set +x
+	$IP netns delete ns1 >& /dev/null
+	$IP netns delete ns2 >& /dev/null
+	$IP link del ve1 >& /dev/null
+	$IP link del ve2 >& /dev/null
+	$IP link del ipt >& /dev/null
+	$IP link del ip6t >& /dev/null
+	sysctl -q -w net.ipv4.conf.all.rp_filter=$RP_FILTER
+	sysctl -q -w net.ipv6.conf.all.forwarding=$IPV6_FORWARDING
+	sysctl -q -w net.ipv6.conf.all.disable_ipv6=$IPV6_DISABLED
+	rm -f /sys/fs/bpf/tc/globals/tun_iface
+	[[ -z $DEBUG ]] || set -x
+	set -e
+}
+
+function l2_to_ipip {
+	echo -n "l2_to_ipip $1: "
+
+	local dir=$1
+
+	config_common ipip
+
+	$IP link add ipt type ipip external
+	$IP link set dev ipt up
+	sysctl -q -w net.ipv4.conf.ipt.rp_filter=0
+	sysctl -q -w net.ipv4.conf.ipt.forwarding=1
+
+	if [[ $dir == "egress" ]]; then
+		$IP route add 10.10.1.0/24 via 10.2.1.102 dev ve2
+		$TC filter add dev ve2 egress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_redirect
+		sysctl -q -w net.ipv4.conf.ve1.forwarding=1
+	else
+		$TC qdisc add dev ve1 clsact
+		$TC filter add dev ve1 ingress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_redirect
+	fi
+
+	$REDIRECT_USER -U /sys/fs/bpf/tc/globals/tun_iface -i $(< /sys/class/net/ipt/ifindex)
+
+	$IP netns exec ns1 ping -c1 10.10.1.102 >& /dev/null
+
+	if [[ $dir == "egress" ]]; then
+		# test direct egress to ve2 (i.e. not forwarding from
+		# ve1 to ve2).
+		ping -c1 10.10.1.102 >& /dev/null
+	fi
+
+	cleanup
+
+	echo "OK"
+}
+
+function l2_to_ip6tnl {
+	echo -n "l2_to_ip6tnl $1: "
+
+	local dir=$1
+
+	config_common ip6tnl
+
+	$IP link add ip6t type ip6tnl mode any external
+	$IP link set dev ip6t up
+	sysctl -q -w net.ipv4.conf.ip6t.rp_filter=0
+	sysctl -q -w net.ipv4.conf.ip6t.forwarding=1
+
+	if [[ $dir == "egress" ]]; then
+		$IP route add 10.10.1.0/24 via 10.2.1.102 dev ve2
+		$IP route add 2401:face::/64 via 2401:db02::66 dev ve2
+		$TC filter add dev ve2 egress bpf da obj $REDIRECT_BPF sec l2_to_ip6tun_ingress_redirect
+		sysctl -q -w net.ipv4.conf.ve1.forwarding=1
+	else
+		$TC qdisc add dev ve1 clsact
+		$TC filter add dev ve1 ingress bpf da obj $REDIRECT_BPF sec l2_to_ip6tun_ingress_redirect
+	fi
+
+	$REDIRECT_USER -U /sys/fs/bpf/tc/globals/tun_iface -i $(< /sys/class/net/ip6t/ifindex)
+
+	$IP netns exec ns1 ping -c1 10.10.1.102 >& /dev/null
+	$IP netns exec ns1 ping -6 -c1 2401:face::66 >& /dev/null
+
+	if [[ $dir == "egress" ]]; then
+		# test direct egress to ve2 (i.e. not forwarding from
+		# ve1 to ve2).
+		ping -c1 10.10.1.102 >& /dev/null
+		ping -6 -c1 2401:face::66 >& /dev/null
+	fi
+
+	cleanup
+
+	echo "OK"
+}
+
+cleanup
+test_names="l2_to_ipip l2_to_ip6tnl"
+test_dirs="ingress egress"
+if [[ $# -ge 2 ]]; then
+	test_names=$1
+	test_dirs=$2
+elif [[ $# -ge 1 ]]; then
+	test_names=$1
+fi
+
+for t in $test_names; do
+	for d in $test_dirs; do
+		$t $d
+	done
+done