Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 190 insertions, 0 deletions

diff --git a/scripts/atomic/gen-atomic-instrumented.sh b/scripts/atomic/gen-atomic-instrumented.sh
new file mode 100755
index 000000000..77c06526a
--- /dev/null
+++ b/scripts/atomic/gen-atomic-instrumented.sh
@@ -0,0 +1,190 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+ATOMICDIR=$(dirname $0)
+
+. ${ATOMICDIR}/atomic-tbl.sh
+
+#gen_param_check(meta, arg)
+gen_param_check()
+{
+	local meta="$1"; shift
+	local arg="$1"; shift
+	local type="${arg%%:*}"
+	local name="$(gen_param_name "${arg}")"
+	local rw="write"
+
+	case "${type#c}" in
+	i) return;;
+	esac
+
+	if [ ${type#c} != ${type} ]; then
+		# We don't write to constant parameters.
+		rw="read"
+	elif [ "${meta}" != "s" ]; then
+		# An atomic RMW: if this parameter is not a constant, and this atomic is
+		# not just a 's'tore, this parameter is both read from and written to.
+		rw="read_write"
+	fi
+
+	printf "\tinstrument_atomic_${rw}(${name}, sizeof(*${name}));\n"
+}
+
+#gen_params_checks(meta, arg...)
+gen_params_checks()
+{
+	local meta="$1"; shift
+	local order="$1"; shift
+
+	if [ "${order}" = "_release" ]; then
+		printf "\tkcsan_release();\n"
+	elif [ -z "${order}" ] && ! meta_in "$meta" "slv"; then
+		# RMW with return value is fully ordered
+		printf "\tkcsan_mb();\n"
+	fi
+
+	while [ "$#" -gt 0 ]; do
+		gen_param_check "$meta" "$1"
+		shift;
+	done
+}
+
+#gen_proto_order_variant(meta, pfx, name, sfx, order, atomic, int, arg...)
+gen_proto_order_variant()
+{
+	local meta="$1"; shift
+	local pfx="$1"; shift
+	local name="$1"; shift
+	local sfx="$1"; shift
+	local order="$1"; shift
+	local atomic="$1"; shift
+	local int="$1"; shift
+
+	local atomicname="${atomic}_${pfx}${name}${sfx}${order}"
+
+	local ret="$(gen_ret_type "${meta}" "${int}")"
+	local params="$(gen_params "${int}" "${atomic}" "$@")"
+	local checks="$(gen_params_checks "${meta}" "${order}" "$@")"
+	local args="$(gen_args "$@")"
+	local retstmt="$(gen_ret_stmt "${meta}")"
+
+cat <<EOF
+static __always_inline ${ret}
+${atomicname}(${params})
+{
+${checks}
+	${retstmt}arch_${atomicname}(${args});
+}
+EOF
+
+	printf "\n"
+}
+
+gen_xchg()
+{
+	local xchg="$1"; shift
+	local order="$1"; shift
+	local mult="$1"; shift
+
+	kcsan_barrier=""
+	if [ "${xchg%_local}" = "${xchg}" ]; then
+		case "$order" in
+		_release)	kcsan_barrier="kcsan_release()" ;;
+		"")			kcsan_barrier="kcsan_mb()" ;;
+		esac
+	fi
+
+	if [ "${xchg%${xchg#try_cmpxchg}}" = "try_cmpxchg" ] ; then
+
+cat <<EOF
+#define ${xchg}${order}(ptr, oldp, ...) \\
+({ \\
+	typeof(ptr) __ai_ptr = (ptr); \\
+	typeof(oldp) __ai_oldp = (oldp); \\
+EOF
+[ -n "$kcsan_barrier" ] && printf "\t${kcsan_barrier}; \\\\\n"
+cat <<EOF
+	instrument_atomic_write(__ai_ptr, ${mult}sizeof(*__ai_ptr)); \\
+	instrument_atomic_write(__ai_oldp, ${mult}sizeof(*__ai_oldp)); \\
+	arch_${xchg}${order}(__ai_ptr, __ai_oldp, __VA_ARGS__); \\
+})
+EOF
+
+	else
+
+cat <<EOF
+#define ${xchg}${order}(ptr, ...) \\
+({ \\
+	typeof(ptr) __ai_ptr = (ptr); \\
+EOF
+[ -n "$kcsan_barrier" ] && printf "\t${kcsan_barrier}; \\\\\n"
+cat <<EOF
+	instrument_atomic_write(__ai_ptr, ${mult}sizeof(*__ai_ptr)); \\
+	arch_${xchg}${order}(__ai_ptr, __VA_ARGS__); \\
+})
+EOF
+
+	fi
+}
+
+cat << EOF
+// SPDX-License-Identifier: GPL-2.0
+
+// Generated by $0
+// DO NOT MODIFY THIS FILE DIRECTLY
+
+/*
+ * This file provides wrappers with KASAN instrumentation for atomic operations.
+ * To use this functionality an arch's atomic.h file needs to define all
+ * atomic operations with arch_ prefix (e.g. arch_atomic_read()) and include
+ * this file at the end. This file provides atomic_read() that forwards to
+ * arch_atomic_read() for actual atomic operation.
+ * Note: if an arch atomic operation is implemented by means of other atomic
+ * operations (e.g. atomic_read()/atomic_cmpxchg() loop), then it needs to use
+ * arch_ variants (i.e. arch_atomic_read()/arch_atomic_cmpxchg()) to avoid
+ * double instrumentation.
+ */
+#ifndef _LINUX_ATOMIC_INSTRUMENTED_H
+#define _LINUX_ATOMIC_INSTRUMENTED_H
+
+#include <linux/build_bug.h>
+#include <linux/compiler.h>
+#include <linux/instrumented.h>
+
+EOF
+
+grep '^[a-z]' "$1" | while read name meta args; do
+	gen_proto "${meta}" "${name}" "atomic" "int" ${args}
+done
+
+grep '^[a-z]' "$1" | while read name meta args; do
+	gen_proto "${meta}" "${name}" "atomic64" "s64" ${args}
+done
+
+grep '^[a-z]' "$1" | while read name meta args; do
+	gen_proto "${meta}" "${name}" "atomic_long" "long" ${args}
+done
+
+
+for xchg in "xchg" "cmpxchg" "cmpxchg64" "try_cmpxchg" "try_cmpxchg64"; do
+	for order in "" "_acquire" "_release" "_relaxed"; do
+		gen_xchg "${xchg}" "${order}" ""
+		printf "\n"
+	done
+done
+
+for xchg in "cmpxchg_local" "cmpxchg64_local" "sync_cmpxchg"; do
+	gen_xchg "${xchg}" "" ""
+	printf "\n"
+done
+
+gen_xchg "cmpxchg_double" "" "2 * "
+
+printf "\n\n"
+
+gen_xchg "cmpxchg_double_local" "" "2 * "
+
+cat <<EOF
+
+#endif /* _LINUX_ATOMIC_INSTRUMENTED_H */
+EOF