Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 224 insertions, 0 deletions

diff --git a/scripts/bootgraph.pl b/scripts/bootgraph.pl
new file mode 100755
index 000000000..79c903292
--- /dev/null
+++ b/scripts/bootgraph.pl
@@ -0,0 +1,224 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0-only
+
+# Copyright 2008, Intel Corporation
+#
+# This file is part of the Linux kernel
+#
+# Authors:
+# 	Arjan van de Ven <arjan@linux.intel.com>
+
+
+#
+# This script turns a dmesg output into a SVG graphic that shows which
+# functions take how much time. You can view SVG graphics with various
+# programs, including Inkscape, The Gimp and Firefox.
+#
+#
+# For this script to work, the kernel needs to be compiled with the
+# CONFIG_PRINTK_TIME configuration option enabled, and with
+# "initcall_debug" passed on the kernel command line.
+#
+# usage:
+# 	dmesg | perl scripts/bootgraph.pl > output.svg
+#
+
+use strict;
+use Getopt::Long;
+my $header = 0;
+
+sub help {
+	my $text = << "EOM";
+Usage:
+1) dmesg | perl scripts/bootgraph.pl [OPTION] > output.svg
+2) perl scripts/bootgraph.pl -h
+
+Options:
+	-header	Insert kernel version and date
+EOM
+	my $std=shift;
+	if ($std == 1) {
+		print STDERR $text;
+	} else {
+		print $text;
+	}
+	exit;
+}
+
+GetOptions(
+	'h|help'	=>\&help,
+	'header'	=>\$header
+);
+
+my %start;
+my %end;
+my %type;
+my $done = 0;
+my $maxtime = 0;
+my $firsttime = 99999;
+my $count = 0;
+my %pids;
+my %pidctr;
+
+my $headerstep = 20;
+my $xheader = 15;
+my $yheader = 25;
+my $cyheader = 0;
+
+while (<>) {
+	my $line = $_;
+	if ($line =~ /([0-9\.]+)\] calling  ([a-zA-Z0-9\_\.]+)\+/) {
+		my $func = $2;
+		if ($done == 0) {
+			$start{$func} = $1;
+			$type{$func} = 0;
+			if ($1 < $firsttime) {
+				$firsttime = $1;
+			}
+		}
+		if ($line =~ /\@ ([0-9]+)/) {
+			$pids{$func} = $1;
+		}
+		$count = $count + 1;
+	}
+
+	if ($line =~ /([0-9\.]+)\] async_waiting @ ([0-9]+)/) {
+		my $pid = $2;
+		my $func;
+		if (!defined($pidctr{$pid})) {
+			$func = "wait_" . $pid . "_1";
+			$pidctr{$pid} = 1;
+		} else {
+			$pidctr{$pid} = $pidctr{$pid} + 1;
+			$func = "wait_" . $pid . "_" . $pidctr{$pid};
+		}
+		if ($done == 0) {
+			$start{$func} = $1;
+			$type{$func} = 1;
+			if ($1 < $firsttime) {
+				$firsttime = $1;
+			}
+		}
+		$pids{$func} = $pid;
+		$count = $count + 1;
+	}
+
+	if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_\.]+)\+.*returned/) {
+		if ($done == 0) {
+			$end{$2} = $1;
+			$maxtime = $1;
+		}
+	}
+
+	if ($line =~ /([0-9\.]+)\] async_continuing @ ([0-9]+)/) {
+		my $pid = $2;
+		my $func =  "wait_" . $pid . "_" . $pidctr{$pid};
+		$end{$func} = $1;
+		$maxtime = $1;
+	}
+	if ($line =~ /Write protecting the/) {
+		$done = 1;
+	}
+	if ($line =~ /Freeing unused kernel memory/) {
+		$done = 1;
+	}
+}
+
+if ($count == 0) {
+    print STDERR <<END;
+No data found in the dmesg. Make sure that 'printk.time=1' and
+'initcall_debug' are passed on the kernel command line.
+END
+	help(1);
+    exit 1;
+}
+
+print "<?xml version=\"1.0\" standalone=\"no\"?> \n";
+print "<svg width=\"2000\" height=\"100%\" version=\"1.1\" xmlns=\"http://www.w3.org/2000/svg\">\n";
+
+
+if ($header) {
+	my $version = `uname -a`;
+	my $date = `date`;
+	print "<text transform=\"translate($xheader,$yheader)\">Kernel version: $version</text>\n";
+	$cyheader = $yheader+$headerstep;
+	print "<text transform=\"translate($xheader,$cyheader)\">Date: $date</text>\n";
+}
+
+my @styles;
+
+$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[8] = "fill:rgb(255,0,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[9] = "fill:rgb(255,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[10] = "fill:rgb(255,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[11] = "fill:rgb(128,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+
+my $style_wait = "fill:rgb(128,128,128);fill-opacity:0.5;stroke-width:0;stroke:rgb(0,0,0)";
+
+my $mult = 1950.0 / ($maxtime - $firsttime);
+my $threshold2 = ($maxtime - $firsttime) / 120.0;
+my $threshold = $threshold2/10;
+my $stylecounter = 0;
+my %rows;
+my $rowscount = 1;
+my @initcalls = sort { $start{$a} <=> $start{$b} } keys(%start);
+
+foreach my $key (@initcalls) {
+	my $duration = $end{$key} - $start{$key};
+
+	if ($duration >= $threshold) {
+		my ($s, $s2, $s3, $e, $w, $y, $y2, $style);
+		my $pid = $pids{$key};
+
+		if (!defined($rows{$pid})) {
+			$rows{$pid} = $rowscount;
+			$rowscount = $rowscount + 1;
+		}
+		$s = ($start{$key} - $firsttime) * $mult;
+		$s2 = $s + 6;
+		$s3 = $s + 1;
+		$e = ($end{$key} - $firsttime) * $mult;
+		$w = $e - $s;
+
+		$y = $rows{$pid} * 150;
+		$y2 = $y + 4;
+
+		$style = $styles[$stylecounter];
+		$stylecounter = $stylecounter + 1;
+		if ($stylecounter > 11) {
+			$stylecounter = 0;
+		};
+
+		if ($type{$key} == 1) {
+			$y = $y + 15;
+			print "<rect x=\"$s\" width=\"$w\" y=\"$y\" height=\"115\" style=\"$style_wait\"/>\n";
+		} else {
+			print "<rect x=\"$s\" width=\"$w\" y=\"$y\" height=\"145\" style=\"$style\"/>\n";
+			if ($duration >= $threshold2) {
+				print "<text transform=\"translate($s2,$y2) rotate(90)\">$key</text>\n";
+			} else {
+				print "<text transform=\"translate($s3,$y2) rotate(90)\" font-size=\"3pt\">$key</text>\n";
+			}
+		}
+	}
+}
+
+
+# print the time line on top
+my $time = $firsttime;
+my $step = ($maxtime - $firsttime) / 15;
+while ($time < $maxtime) {
+	my $s3 = ($time - $firsttime) * $mult;
+	my $tm = int($time * 100) / 100.0;
+	print "<text transform=\"translate($s3,89) rotate(90)\">$tm</text>\n";
+	$time = $time + $step;
+}
+
+print "</svg>\n";