Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 205 insertions, 0 deletions

diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
new file mode 100755
index 000000000..d48dfed6d
--- /dev/null
+++ b/scripts/checkstack.pl
@@ -0,0 +1,205 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+
+#	Check the stack usage of functions
+#
+#	Copyright Joern Engel <joern@lazybastard.org>
+#	Inspired by Linus Torvalds
+#	Original idea maybe from Keith Owens
+#	s390 port and big speedup by Arnd Bergmann <arnd@bergmann-dalldorf.de>
+#	Mips port by Juan Quintela <quintela@mandrakesoft.com>
+#	IA64 port via Andreas Dilger
+#	Arm port by Holger Schurig
+#	sh64 port by Paul Mundt
+#	Random bits by Matt Mackall <mpm@selenic.com>
+#	M68k port by Geert Uytterhoeven and Andreas Schwab
+#	AArch64, PARISC ports by Kyle McMartin
+#	sparc port by Martin Habets <errandir_news@mph.eclipse.co.uk>
+#	ppc64le port by Breno Leitao <leitao@debian.org>
+#	riscv port by Wadim Mueller <wafgo01@gmail.com>
+#
+#	Usage:
+#	objdump -d vmlinux | scripts/checkstack.pl [arch]
+#
+#	TODO :	Port to all architectures (one regex per arch)
+
+use strict;
+
+# check for arch
+#
+# $re is used for two matches:
+# $& (whole re) matches the complete objdump line with the stack growth
+# $1 (first bracket) matches the size of the stack growth
+#
+# $dre is similar, but for dynamic stack redutions:
+# $& (whole re) matches the complete objdump line with the stack growth
+# $1 (first bracket) matches the dynamic amount of the stack growth
+#
+# $sub: subroutine for special handling to check stack usage.
+#
+# use anything else and feel the pain ;)
+my (@stack, $re, $dre, $sub, $x, $xs, $funcre, $min_stack);
+{
+	my $arch = shift;
+	if ($arch eq "") {
+		$arch = `uname -m`;
+		chomp($arch);
+	}
+
+	$min_stack = shift;
+	if ($min_stack eq "" || $min_stack !~ /^\d+$/) {
+		$min_stack = 100;
+	}
+
+	$x	= "[0-9a-f]";	# hex character
+	$xs	= "[0-9a-f ]";	# hex character or space
+	$funcre = qr/^$x* <(.*)>:$/;
+	if ($arch =~ '^(aarch|arm)64$') {
+		#ffffffc0006325cc:       a9bb7bfd        stp     x29, x30, [sp, #-80]!
+		#a110:       d11643ff        sub     sp, sp, #0x590
+		$re = qr/^.*stp.*sp, \#-([0-9]{1,8})\]\!/o;
+		$dre = qr/^.*sub.*sp, sp, #(0x$x{1,8})/o;
+	} elsif ($arch eq 'arm') {
+		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
+		$re = qr/.*sub.*sp, sp, #([0-9]{1,4})/o;
+		$sub = \&arm_push_handling;
+	} elsif ($arch =~ /^x86(_64)?$/ || $arch =~ /^i[3456]86$/) {
+		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
+		# or
+		#    2f60:    48 81 ec e8 05 00 00       sub    $0x5e8,%rsp
+		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%(e|r)sp$/o;
+		$dre = qr/^.*[as][du][db]    (%.*),\%(e|r)sp$/o;
+	} elsif ($arch eq 'ia64') {
+		#e0000000044011fc:       01 0f fc 8c     adds r12=-384,r12
+		$re = qr/.*adds.*r12=-(([0-9]{2}|[3-9])[0-9]{2}),r12/o;
+	} elsif ($arch eq 'm68k') {
+		#    2b6c:       4e56 fb70       linkw %fp,#-1168
+		#  1df770:       defc ffe4       addaw #-28,%sp
+		$re = qr/.*(?:linkw %fp,|addaw )#-([0-9]{1,4})(?:,%sp)?$/o;
+	} elsif ($arch eq 'mips64') {
+		#8800402c:       67bdfff0        daddiu  sp,sp,-16
+		$re = qr/.*daddiu.*sp,sp,-(([0-9]{2}|[3-9])[0-9]{2})/o;
+	} elsif ($arch eq 'mips') {
+		#88003254:       27bdffe0        addiu   sp,sp,-32
+		$re = qr/.*addiu.*sp,sp,-(([0-9]{2}|[3-9])[0-9]{2})/o;
+	} elsif ($arch eq 'nios2') {
+		#25a8:	defffb04 	addi	sp,sp,-20
+		$re = qr/.*addi.*sp,sp,-(([0-9]{2}|[3-9])[0-9]{2})/o;
+	} elsif ($arch eq 'openrisc') {
+		# c000043c:       9c 21 fe f0     l.addi r1,r1,-272
+		$re = qr/.*l\.addi.*r1,r1,-(([0-9]{2}|[3-9])[0-9]{2})/o;
+	} elsif ($arch eq 'parisc' || $arch eq 'parisc64') {
+		$re = qr/.*ldo ($x{1,8})\(sp\),sp/o;
+	} elsif ($arch eq 'powerpc' || $arch =~ /^ppc(64)?(le)?$/ ) {
+		# powerpc    : 94 21 ff 30     stwu    r1,-208(r1)
+		# ppc64(le)  : 81 ff 21 f8     stdu    r1,-128(r1)
+		$re = qr/.*st[dw]u.*r1,-($x{1,8})\(r1\)/o;
+	} elsif ($arch =~ /^s390x?$/) {
+		#   11160:       a7 fb ff 60             aghi   %r15,-160
+		# or
+		#  100092:	 e3 f0 ff c8 ff 71	 lay	 %r15,-56(%r15)
+		$re = qr/.*(?:lay|ag?hi).*\%r15,-(([0-9]{2}|[3-9])[0-9]{2})
+		      (?:\(\%r15\))?$/ox;
+	} elsif ($arch =~ /^sh64$/) {
+		#XXX: we only check for the immediate case presently,
+		#     though we will want to check for the movi/sub
+		#     pair for larger users. -- PFM.
+		#a00048e0:       d4fc40f0        addi.l  r15,-240,r15
+		$re = qr/.*addi\.l.*r15,-(([0-9]{2}|[3-9])[0-9]{2}),r15/o;
+	} elsif ($arch eq 'sparc' || $arch eq 'sparc64') {
+		# f0019d10:       9d e3 bf 90     save  %sp, -112, %sp
+		$re = qr/.*save.*%sp, -(([0-9]{2}|[3-9])[0-9]{2}), %sp/o;
+	} elsif ($arch =~ /^riscv(64)?$/) {
+		#ffffffff8036e868:	c2010113          	addi	sp,sp,-992
+		$re = qr/.*addi.*sp,sp,-(([0-9]{2}|[3-9])[0-9]{2})/o;
+	} else {
+		print("wrong or unknown architecture \"$arch\"\n");
+		exit
+	}
+}
+
+#
+# To count stack usage of push {*, fp, ip, lr, pc} instruction in ARM,
+# if FRAME POINTER is enabled.
+# e.g. c01f0d48: e92ddff0 push {r4, r5, r6, r7, r8, r9, sl, fp, ip, lr, pc}
+#
+sub arm_push_handling {
+	my $regex = qr/.*push.*fp, ip, lr, pc}/o;
+	my $size = 0;
+	my $line_arg = shift;
+
+	if ($line_arg =~ m/$regex/) {
+		$size = $line_arg =~ tr/,//;
+		$size = ($size + 1) * 4;
+	}
+
+	return $size;
+}
+
+#
+# main()
+#
+my ($func, $file, $lastslash, $total_size, $addr, $intro);
+
+$total_size = 0;
+
+while (my $line = <STDIN>) {
+	if ($line =~ m/$funcre/) {
+		$func = $1;
+		next if $line !~ m/^($xs*)/;
+		if ($total_size > $min_stack) {
+			push @stack, "$intro$total_size\n";
+		}
+
+		$addr = $1;
+		$addr =~ s/ /0/g;
+		$addr = "0x$addr";
+
+		$intro = "$addr $func [$file]:";
+		my $padlen = 56 - length($intro);
+		while ($padlen > 0) {
+			$intro .= '	';
+			$padlen -= 8;
+		}
+
+		$total_size = 0;
+	}
+	elsif ($line =~ m/(.*):\s*file format/) {
+		$file = $1;
+		$file =~ s/\.ko//;
+		$lastslash = rindex($file, "/");
+		if ($lastslash != -1) {
+			$file = substr($file, $lastslash + 1);
+		}
+	}
+	elsif ($line =~ m/$re/) {
+		my $size = $1;
+		$size = hex($size) if ($size =~ /^0x/);
+
+		if ($size > 0xf0000000) {
+			$size = - $size;
+			$size += 0x80000000;
+			$size += 0x80000000;
+		}
+		next if ($size > 0x10000000);
+
+		$total_size += $size;
+	}
+	elsif (defined $dre && $line =~ m/$dre/) {
+		my $size = $1;
+
+		$size = hex($size) if ($size =~ /^0x/);
+		$total_size += $size;
+	}
+	elsif (defined $sub) {
+		my $size = &$sub($line);
+
+		$total_size += $size;
+	}
+}
+if ($total_size > $min_stack) {
+	push @stack, "$intro$total_size\n";
+}
+
+# Sort output by size (last field)
+print sort { ($b =~ /:\t*(\d+)$/)[0] <=> ($a =~ /:\t*(\d+)$/)[0] } @stack;