Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 309 insertions, 0 deletions

diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh
new file mode 100755
index 000000000..564c5632e
--- /dev/null
+++ b/scripts/decode_stacktrace.sh
@@ -0,0 +1,309 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# (c) 2014, Sasha Levin <sasha.levin@oracle.com>
+#set -x
+
+usage() {
+	echo "Usage:"
+	echo "	$0 -r <release> | <vmlinux> [<base path>|auto] [<modules path>]"
+}
+
+# Try to find a Rust demangler
+if type llvm-cxxfilt >/dev/null 2>&1 ; then
+	cppfilt=llvm-cxxfilt
+elif type c++filt >/dev/null 2>&1 ; then
+	cppfilt=c++filt
+	cppfilt_opts=-i
+fi
+
+if [[ $1 == "-r" ]] ; then
+	vmlinux=""
+	basepath="auto"
+	modpath=""
+	release=$2
+
+	for fn in {,/usr/lib/debug}/boot/vmlinux-$release{,.debug} /lib/modules/$release{,/build}/vmlinux ; do
+		if [ -e "$fn" ] ; then
+			vmlinux=$fn
+			break
+		fi
+	done
+
+	if [[ $vmlinux == "" ]] ; then
+		echo "ERROR! vmlinux image for release $release is not found" >&2
+		usage
+		exit 2
+	fi
+else
+	vmlinux=$1
+	basepath=${2-auto}
+	modpath=$3
+	release=""
+	debuginfod=
+
+	# Can we use debuginfod-find?
+	if type debuginfod-find >/dev/null 2>&1 ; then
+		debuginfod=${1-only}
+	fi
+
+	if [[ $vmlinux == "" && -z $debuginfod ]] ; then
+		echo "ERROR! vmlinux image must be specified" >&2
+		usage
+		exit 1
+	fi
+fi
+
+declare aarray_support=true
+declare -A cache 2>/dev/null
+if [[ $? != 0 ]]; then
+	aarray_support=false
+else
+	declare -A modcache
+fi
+
+find_module() {
+	if [[ -n $debuginfod ]] ; then
+		if [[ -n $modbuildid ]] ; then
+			debuginfod-find debuginfo $modbuildid && return
+		fi
+
+		# Only using debuginfod so don't try to find vmlinux module path
+		if [[ $debuginfod == "only" ]] ; then
+			return
+		fi
+	fi
+
+	if [[ "$modpath" != "" ]] ; then
+		for fn in $(find "$modpath" -name "${module//_/[-_]}.ko*") ; do
+			if readelf -WS "$fn" | grep -qwF .debug_line ; then
+				echo $fn
+				return
+			fi
+		done
+		return 1
+	fi
+
+	modpath=$(dirname "$vmlinux")
+	find_module && return
+
+	if [[ $release == "" ]] ; then
+		release=$(gdb -ex 'print init_uts_ns.name.release' -ex 'quit' -quiet -batch "$vmlinux" 2>/dev/null | sed -n 's/\$1 = "\(.*\)".*/\1/p')
+	fi
+
+	for dn in {/usr/lib/debug,}/lib/modules/$release ; do
+		if [ -e "$dn" ] ; then
+			modpath="$dn"
+			find_module && return
+		fi
+	done
+
+	modpath=""
+	return 1
+}
+
+parse_symbol() {
+	# The structure of symbol at this point is:
+	#   ([name]+[offset]/[total length])
+	#
+	# For example:
+	#   do_basic_setup+0x9c/0xbf
+
+	if [[ $module == "" ]] ; then
+		local objfile=$vmlinux
+	elif [[ $aarray_support == true && "${modcache[$module]+isset}" == "isset" ]]; then
+		local objfile=${modcache[$module]}
+	else
+		local objfile=$(find_module)
+		if [[ $objfile == "" ]] ; then
+			echo "WARNING! Modules path isn't set, but is needed to parse this symbol" >&2
+			return
+		fi
+		if [[ $aarray_support == true ]]; then
+			modcache[$module]=$objfile
+		fi
+	fi
+
+	# Remove the englobing parenthesis
+	symbol=${symbol#\(}
+	symbol=${symbol%\)}
+
+	# Strip segment
+	local segment
+	if [[ $symbol == *:* ]] ; then
+		segment=${symbol%%:*}:
+		symbol=${symbol#*:}
+	fi
+
+	# Strip the symbol name so that we could look it up
+	local name=${symbol%+*}
+
+	# Use 'nm vmlinux' to figure out the base address of said symbol.
+	# It's actually faster to call it every time than to load it
+	# all into bash.
+	if [[ $aarray_support == true && "${cache[$module,$name]+isset}" == "isset" ]]; then
+		local base_addr=${cache[$module,$name]}
+	else
+		local base_addr=$(nm "$objfile" 2>/dev/null | awk '$3 == "'$name'" && ($2 == "t" || $2 == "T") {print $1; exit}')
+		if [[ $base_addr == "" ]] ; then
+			# address not found
+			return
+		fi
+		if [[ $aarray_support == true ]]; then
+			cache[$module,$name]="$base_addr"
+		fi
+	fi
+	# Let's start doing the math to get the exact address into the
+	# symbol. First, strip out the symbol total length.
+	local expr=${symbol%/*}
+
+	# Now, replace the symbol name with the base address we found
+	# before.
+	expr=${expr/$name/0x$base_addr}
+
+	# Evaluate it to find the actual address
+	expr=$((expr))
+	local address=$(printf "%x\n" "$expr")
+
+	# Pass it to addr2line to get filename and line number
+	# Could get more than one result
+	if [[ $aarray_support == true && "${cache[$module,$address]+isset}" == "isset" ]]; then
+		local code=${cache[$module,$address]}
+	else
+		local code=$(${CROSS_COMPILE}addr2line -i -e "$objfile" "$address" 2>/dev/null)
+		if [[ $aarray_support == true ]]; then
+			cache[$module,$address]=$code
+		fi
+	fi
+
+	# addr2line doesn't return a proper error code if it fails, so
+	# we detect it using the value it prints so that we could preserve
+	# the offset/size into the function and bail out
+	if [[ $code == "??:0" ]]; then
+		return
+	fi
+
+	# Strip out the base of the path on each line
+	code=$(while read -r line; do echo "${line#$basepath/}"; done <<< "$code")
+
+	# In the case of inlines, move everything to same line
+	code=${code//$'\n'/' '}
+
+	# Demangle if the name looks like a Rust symbol and if
+	# we got a Rust demangler
+	if [[ $name =~ ^_R && $cppfilt != "" ]] ; then
+		name=$("$cppfilt" "$cppfilt_opts" "$name")
+	fi
+
+	# Replace old address with pretty line numbers
+	symbol="$segment$name ($code)"
+}
+
+debuginfod_get_vmlinux() {
+	local vmlinux_buildid=${1##* }
+
+	if [[ $vmlinux != "" ]]; then
+		return
+	fi
+
+	if [[ $vmlinux_buildid =~ ^[0-9a-f]+ ]]; then
+		vmlinux=$(debuginfod-find debuginfo $vmlinux_buildid)
+		if [[ $? -ne 0 ]] ; then
+			echo "ERROR! vmlinux image not found via debuginfod-find" >&2
+			usage
+			exit 2
+		fi
+		return
+	fi
+	echo "ERROR! Build ID for vmlinux not found. Try passing -r or specifying vmlinux" >&2
+	usage
+	exit 2
+}
+
+decode_code() {
+	local scripts=`dirname "${BASH_SOURCE[0]}"`
+
+	echo "$1" | $scripts/decodecode
+}
+
+handle_line() {
+	if [[ $basepath == "auto" && $vmlinux != "" ]] ; then
+		module=""
+		symbol="kernel_init+0x0/0x0"
+		parse_symbol
+		basepath=${symbol#kernel_init (}
+		basepath=${basepath%/init/main.c:*)}
+	fi
+
+	local words
+
+	# Tokenize
+	read -a words <<<"$1"
+
+	# Remove hex numbers. Do it ourselves until it happens in the
+	# kernel
+
+	# We need to know the index of the last element before we
+	# remove elements because arrays are sparse
+	local last=$(( ${#words[@]} - 1 ))
+
+	for i in "${!words[@]}"; do
+		# Remove the address
+		if [[ ${words[$i]} =~ \[\<([^]]+)\>\] ]]; then
+			unset words[$i]
+		fi
+
+		# Format timestamps with tabs
+		if [[ ${words[$i]} == \[ && ${words[$i+1]} == *\] ]]; then
+			unset words[$i]
+			words[$i+1]=$(printf "[%13s\n" "${words[$i+1]}")
+		fi
+	done
+
+	if [[ ${words[$last]} =~ ^[0-9a-f]+\] ]]; then
+		words[$last-1]="${words[$last-1]} ${words[$last]}"
+		unset words[$last]
+		last=$(( $last - 1 ))
+	fi
+
+	if [[ ${words[$last]} =~ \[([^]]+)\] ]]; then
+		module=${words[$last]}
+		module=${module#\[}
+		module=${module%\]}
+		modbuildid=${module#* }
+		module=${module% *}
+		if [[ $modbuildid == $module ]]; then
+			modbuildid=
+		fi
+		symbol=${words[$last-1]}
+		unset words[$last-1]
+	else
+		# The symbol is the last element, process it
+		symbol=${words[$last]}
+		module=
+		modbuildid=
+	fi
+
+	unset words[$last]
+	parse_symbol # modifies $symbol
+
+	# Add up the line number to the symbol
+	echo "${words[@]}" "$symbol $module"
+}
+
+while read line; do
+	# Let's see if we have an address in the line
+	if [[ $line =~ \[\<([^]]+)\>\] ]] ||
+	   [[ $line =~ [^+\ ]+\+0x[0-9a-f]+/0x[0-9a-f]+ ]]; then
+		# Translate address to line numbers
+		handle_line "$line"
+	# Is it a code line?
+	elif [[ $line == *Code:* ]]; then
+		decode_code "$line"
+	# Is it a version line?
+	elif [[ -n $debuginfod && $line =~ PID:\ [0-9]+\ Comm: ]]; then
+		debuginfod_get_vmlinux "$line"
+	else
+		# Nothing special in this line, show it as is
+		echo "$line"
+	fi
+done