Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 192 insertions, 0 deletions

diff --git a/scripts/dtc/libfdt/libfdt_internal.h b/scripts/dtc/libfdt/libfdt_internal.h
new file mode 100644
index 000000000..16bda1906
--- /dev/null
+++ b/scripts/dtc/libfdt/libfdt_internal.h
@@ -0,0 +1,192 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */
+#ifndef LIBFDT_INTERNAL_H
+#define LIBFDT_INTERNAL_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ */
+#include <fdt.h>
+
+#define FDT_ALIGN(x, a)		(((x) + (a) - 1) & ~((a) - 1))
+#define FDT_TAGALIGN(x)		(FDT_ALIGN((x), FDT_TAGSIZE))
+
+int32_t fdt_ro_probe_(const void *fdt);
+#define FDT_RO_PROBE(fdt)					\
+	{							\
+		int32_t totalsize_;				\
+		if ((totalsize_ = fdt_ro_probe_(fdt)) < 0)	\
+			return totalsize_;			\
+	}
+
+int fdt_check_node_offset_(const void *fdt, int offset);
+int fdt_check_prop_offset_(const void *fdt, int offset);
+const char *fdt_find_string_(const char *strtab, int tabsize, const char *s);
+int fdt_node_end_offset_(void *fdt, int nodeoffset);
+
+static inline const void *fdt_offset_ptr_(const void *fdt, int offset)
+{
+	return (const char *)fdt + fdt_off_dt_struct(fdt) + offset;
+}
+
+static inline void *fdt_offset_ptr_w_(void *fdt, int offset)
+{
+	return (void *)(uintptr_t)fdt_offset_ptr_(fdt, offset);
+}
+
+static inline const struct fdt_reserve_entry *fdt_mem_rsv_(const void *fdt, int n)
+{
+	const struct fdt_reserve_entry *rsv_table =
+		(const struct fdt_reserve_entry *)
+		((const char *)fdt + fdt_off_mem_rsvmap(fdt));
+
+	return rsv_table + n;
+}
+static inline struct fdt_reserve_entry *fdt_mem_rsv_w_(void *fdt, int n)
+{
+	return (void *)(uintptr_t)fdt_mem_rsv_(fdt, n);
+}
+
+/*
+ * Internal helpers to access tructural elements of the device tree
+ * blob (rather than for exaple reading integers from within property
+ * values).  We assume that we are either given a naturally aligned
+ * address for the platform or if we are not, we are on a platform
+ * where unaligned memory reads will be handled in a graceful manner.
+ * If not the external helpers fdtXX_ld() from libfdt.h can be used
+ * instead.
+ */
+static inline uint32_t fdt32_ld_(const fdt32_t *p)
+{
+	return fdt32_to_cpu(*p);
+}
+
+static inline uint64_t fdt64_ld_(const fdt64_t *p)
+{
+	return fdt64_to_cpu(*p);
+}
+
+#define FDT_SW_MAGIC		(~FDT_MAGIC)
+
+/**********************************************************************/
+/* Checking controls                                                  */
+/**********************************************************************/
+
+#ifndef FDT_ASSUME_MASK
+#define FDT_ASSUME_MASK 0
+#endif
+
+/*
+ * Defines assumptions which can be enabled. Each of these can be enabled
+ * individually. For maximum safety, don't enable any assumptions!
+ *
+ * For minimal code size and no safety, use ASSUME_PERFECT at your own risk.
+ * You should have another method of validating the device tree, such as a
+ * signature or hash check before using libfdt.
+ *
+ * For situations where security is not a concern it may be safe to enable
+ * ASSUME_SANE.
+ */
+enum {
+	/*
+	 * This does essentially no checks. Only the latest device-tree
+	 * version is correctly handled. Inconsistencies or errors in the device
+	 * tree may cause undefined behaviour or crashes. Invalid parameters
+	 * passed to libfdt may do the same.
+	 *
+	 * If an error occurs when modifying the tree it may leave the tree in
+	 * an intermediate (but valid) state. As an example, adding a property
+	 * where there is insufficient space may result in the property name
+	 * being added to the string table even though the property itself is
+	 * not added to the struct section.
+	 *
+	 * Only use this if you have a fully validated device tree with
+	 * the latest supported version and wish to minimise code size.
+	 */
+	ASSUME_PERFECT		= 0xff,
+
+	/*
+	 * This assumes that the device tree is sane. i.e. header metadata
+	 * and basic hierarchy are correct.
+	 *
+	 * With this assumption enabled, normal device trees produced by libfdt
+	 * and the compiler should be handled safely. Malicious device trees and
+	 * complete garbage may cause libfdt to behave badly or crash. Truncated
+	 * device trees (e.g. those only partially loaded) can also cause
+	 * problems.
+	 *
+	 * Note: Only checks that relate exclusively to the device tree itself
+	 * (not the parameters passed to libfdt) are disabled by this
+	 * assumption. This includes checking headers, tags and the like.
+	 */
+	ASSUME_VALID_DTB	= 1 << 0,
+
+	/*
+	 * This builds on ASSUME_VALID_DTB and further assumes that libfdt
+	 * functions are called with valid parameters, i.e. not trigger
+	 * FDT_ERR_BADOFFSET or offsets that are out of bounds. It disables any
+	 * extensive checking of parameters and the device tree, making various
+	 * assumptions about correctness.
+	 *
+	 * It doesn't make sense to enable this assumption unless
+	 * ASSUME_VALID_DTB is also enabled.
+	 */
+	ASSUME_VALID_INPUT	= 1 << 1,
+
+	/*
+	 * This disables checks for device-tree version and removes all code
+	 * which handles older versions.
+	 *
+	 * Only enable this if you know you have a device tree with the latest
+	 * version.
+	 */
+	ASSUME_LATEST		= 1 << 2,
+
+	/*
+	 * This assumes that it is OK for a failed addition to the device tree,
+	 * due to lack of space or some other problem, to skip any rollback
+	 * steps (such as dropping the property name from the string table).
+	 * This is safe to enable in most circumstances, even though it may
+	 * leave the tree in a sub-optimal state.
+	 */
+	ASSUME_NO_ROLLBACK	= 1 << 3,
+
+	/*
+	 * This assumes that the device tree components appear in a 'convenient'
+	 * order, i.e. the memory reservation block first, then the structure
+	 * block and finally the string block.
+	 *
+	 * This order is not specified by the device-tree specification,
+	 * but is expected by libfdt. The device-tree compiler always created
+	 * device trees with this order.
+	 *
+	 * This assumption disables a check in fdt_open_into() and removes the
+	 * ability to fix the problem there. This is safe if you know that the
+	 * device tree is correctly ordered. See fdt_blocks_misordered_().
+	 */
+	ASSUME_LIBFDT_ORDER	= 1 << 4,
+
+	/*
+	 * This assumes that libfdt itself does not have any internal bugs. It
+	 * drops certain checks that should never be needed unless libfdt has an
+	 * undiscovered bug.
+	 *
+	 * This can generally be considered safe to enable.
+	 */
+	ASSUME_LIBFDT_FLAWLESS	= 1 << 5,
+};
+
+/**
+ * can_assume_() - check if a particular assumption is enabled
+ *
+ * @mask: Mask to check (ASSUME_...)
+ * @return true if that assumption is enabled, else false
+ */
+static inline bool can_assume_(int mask)
+{
+	return FDT_ASSUME_MASK & mask;
+}
+
+/** helper macros for checking assumptions */
+#define can_assume(_assume)	can_assume_(ASSUME_ ## _assume)
+
+#endif /* LIBFDT_INTERNAL_H */