Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1042 insertions, 0 deletions

diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
new file mode 100644
index 000000000..e67e0db50
--- /dev/null
+++ b/scripts/kconfig/mconf.c
@@ -0,0 +1,1042 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ *
+ * Introduced single menu mode (show all sub-menus in one large tree).
+ * 2002-11-06 Petr Baudis <pasky@ucw.cz>
+ *
+ * i18n, 2005, Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <strings.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include "lkc.h"
+#include "lxdialog/dialog.h"
+
+#define JUMP_NB			9
+
+static const char mconf_readme[] =
+"Overview\n"
+"--------\n"
+"This interface lets you select features and parameters for the build.\n"
+"Features can either be built-in, modularized, or ignored. Parameters\n"
+"must be entered in as decimal or hexadecimal numbers or text.\n"
+"\n"
+"Menu items beginning with following braces represent features that\n"
+"  [ ] can be built in or removed\n"
+"  < > can be built in, modularized or removed\n"
+"  { } can be built in or modularized (selected by other feature)\n"
+"  - - are selected by other feature,\n"
+"while *, M or whitespace inside braces means to build in, build as\n"
+"a module or to exclude the feature respectively.\n"
+"\n"
+"To change any of these features, highlight it with the cursor\n"
+"keys and press <Y> to build it in, <M> to make it a module or\n"
+"<N> to remove it.  You may also press the <Space Bar> to cycle\n"
+"through the available options (i.e. Y->N->M->Y).\n"
+"\n"
+"Some additional keyboard hints:\n"
+"\n"
+"Menus\n"
+"----------\n"
+"o  Use the Up/Down arrow keys (cursor keys) to highlight the item you\n"
+"   wish to change or the submenu you wish to select and press <Enter>.\n"
+"   Submenus are designated by \"--->\", empty ones by \"----\".\n"
+"\n"
+"   Shortcut: Press the option's highlighted letter (hotkey).\n"
+"             Pressing a hotkey more than once will sequence\n"
+"             through all visible items which use that hotkey.\n"
+"\n"
+"   You may also use the <PAGE UP> and <PAGE DOWN> keys to scroll\n"
+"   unseen options into view.\n"
+"\n"
+"o  To exit a menu use the cursor keys to highlight the <Exit> button\n"
+"   and press <ENTER>.\n"
+"\n"
+"   Shortcut: Press <ESC><ESC> or <E> or <X> if there is no hotkey\n"
+"             using those letters.  You may press a single <ESC>, but\n"
+"             there is a delayed response which you may find annoying.\n"
+"\n"
+"   Also, the <TAB> and cursor keys will cycle between <Select>,\n"
+"   <Exit>, <Help>, <Save>, and <Load>.\n"
+"\n"
+"o  To get help with an item, use the cursor keys to highlight <Help>\n"
+"   and press <ENTER>.\n"
+"\n"
+"   Shortcut: Press <H> or <?>.\n"
+"\n"
+"o  To toggle the display of hidden options, press <Z>.\n"
+"\n"
+"\n"
+"Radiolists  (Choice lists)\n"
+"-----------\n"
+"o  Use the cursor keys to select the option you wish to set and press\n"
+"   <S> or the <SPACE BAR>.\n"
+"\n"
+"   Shortcut: Press the first letter of the option you wish to set then\n"
+"             press <S> or <SPACE BAR>.\n"
+"\n"
+"o  To see available help for the item, use the cursor keys to highlight\n"
+"   <Help> and Press <ENTER>.\n"
+"\n"
+"   Shortcut: Press <H> or <?>.\n"
+"\n"
+"   Also, the <TAB> and cursor keys will cycle between <Select> and\n"
+"   <Help>\n"
+"\n"
+"\n"
+"Data Entry\n"
+"-----------\n"
+"o  Enter the requested information and press <ENTER>\n"
+"   If you are entering hexadecimal values, it is not necessary to\n"
+"   add the '0x' prefix to the entry.\n"
+"\n"
+"o  For help, use the <TAB> or cursor keys to highlight the help option\n"
+"   and press <ENTER>.  You can try <TAB><H> as well.\n"
+"\n"
+"\n"
+"Text Box    (Help Window)\n"
+"--------\n"
+"o  Use the cursor keys to scroll up/down/left/right.  The VI editor\n"
+"   keys h,j,k,l function here as do <u>, <d>, <SPACE BAR> and <B> for\n"
+"   those who are familiar with less and lynx.\n"
+"\n"
+"o  Press <E>, <X>, <q>, <Enter> or <Esc><Esc> to exit.\n"
+"\n"
+"\n"
+"Alternate Configuration Files\n"
+"-----------------------------\n"
+"Menuconfig supports the use of alternate configuration files for\n"
+"those who, for various reasons, find it necessary to switch\n"
+"between different configurations.\n"
+"\n"
+"The <Save> button will let you save the current configuration to\n"
+"a file of your choosing.  Use the <Load> button to load a previously\n"
+"saved alternate configuration.\n"
+"\n"
+"Even if you don't use alternate configuration files, but you find\n"
+"during a Menuconfig session that you have completely messed up your\n"
+"settings, you may use the <Load> button to restore your previously\n"
+"saved settings from \".config\" without restarting Menuconfig.\n"
+"\n"
+"Other information\n"
+"-----------------\n"
+"If you use Menuconfig in an XTERM window, make sure you have your\n"
+"$TERM variable set to point to an xterm definition which supports\n"
+"color.  Otherwise, Menuconfig will look rather bad.  Menuconfig will\n"
+"not display correctly in an RXVT window because rxvt displays only one\n"
+"intensity of color, bright.\n"
+"\n"
+"Menuconfig will display larger menus on screens or xterms which are\n"
+"set to display more than the standard 25 row by 80 column geometry.\n"
+"In order for this to work, the \"stty size\" command must be able to\n"
+"display the screen's current row and column geometry.  I STRONGLY\n"
+"RECOMMEND that you make sure you do NOT have the shell variables\n"
+"LINES and COLUMNS exported into your environment.  Some distributions\n"
+"export those variables via /etc/profile.  Some ncurses programs can\n"
+"become confused when those variables (LINES & COLUMNS) don't reflect\n"
+"the true screen size.\n"
+"\n"
+"Optional personality available\n"
+"------------------------------\n"
+"If you prefer to have all of the options listed in a single menu,\n"
+"rather than the default multimenu hierarchy, run the menuconfig with\n"
+"MENUCONFIG_MODE environment variable set to single_menu. Example:\n"
+"\n"
+"make MENUCONFIG_MODE=single_menu menuconfig\n"
+"\n"
+"<Enter> will then unroll the appropriate category, or enfold it if it\n"
+"is already unrolled.\n"
+"\n"
+"Note that this mode can eventually be a little more CPU expensive\n"
+"(especially with a larger number of unrolled categories) than the\n"
+"default mode.\n"
+"\n"
+
+"Search\n"
+"-------\n"
+"Pressing the forward-slash (/) anywhere brings up a search dialog box.\n"
+"\n"
+
+"Different color themes available\n"
+"--------------------------------\n"
+"It is possible to select different color themes using the variable\n"
+"MENUCONFIG_COLOR. To select a theme use:\n"
+"\n"
+"make MENUCONFIG_COLOR=<theme> menuconfig\n"
+"\n"
+"Available themes are\n"
+" mono       => selects colors suitable for monochrome displays\n"
+" blackbg    => selects a color scheme with black background\n"
+" classic    => theme with blue background. The classic look\n"
+" bluetitle  => an LCD friendly version of classic. (default)\n"
+"\n",
+menu_instructions[] =
+	"Arrow keys navigate the menu.  "
+	"<Enter> selects submenus ---> (or empty submenus ----).  "
+	"Highlighted letters are hotkeys.  "
+	"Pressing <Y> includes, <N> excludes, <M> modularizes features.  "
+	"Press <Esc><Esc> to exit, <?> for Help, </> for Search.  "
+	"Legend: [*] built-in  [ ] excluded  <M> module  < > module capable",
+radiolist_instructions[] =
+	"Use the arrow keys to navigate this window or "
+	"press the hotkey of the item you wish to select "
+	"followed by the <SPACE BAR>. "
+	"Press <?> for additional information about this option.",
+inputbox_instructions_int[] =
+	"Please enter a decimal value. "
+	"Fractions will not be accepted.  "
+	"Use the <TAB> key to move from the input field to the buttons below it.",
+inputbox_instructions_hex[] =
+	"Please enter a hexadecimal value. "
+	"Use the <TAB> key to move from the input field to the buttons below it.",
+inputbox_instructions_string[] =
+	"Please enter a string value. "
+	"Use the <TAB> key to move from the input field to the buttons below it.",
+setmod_text[] =
+	"This feature depends on another which has been configured as a module.\n"
+	"As a result, this feature will be built as a module.",
+load_config_text[] =
+	"Enter the name of the configuration file you wish to load.  "
+	"Accept the name shown to restore the configuration you "
+	"last retrieved.  Leave blank to abort.",
+load_config_help[] =
+	"\n"
+	"For various reasons, one may wish to keep several different\n"
+	"configurations available on a single machine.\n"
+	"\n"
+	"If you have saved a previous configuration in a file other than the\n"
+	"default one, entering its name here will allow you to modify that\n"
+	"configuration.\n"
+	"\n"
+	"If you are uncertain, then you have probably never used alternate\n"
+	"configuration files. You should therefore leave this blank to abort.\n",
+save_config_text[] =
+	"Enter a filename to which this configuration should be saved "
+	"as an alternate.  Leave blank to abort.",
+save_config_help[] =
+	"\n"
+	"For various reasons, one may wish to keep different configurations\n"
+	"available on a single machine.\n"
+	"\n"
+	"Entering a file name here will allow you to later retrieve, modify\n"
+	"and use the current configuration as an alternate to whatever\n"
+	"configuration options you have selected at that time.\n"
+	"\n"
+	"If you are uncertain what all this means then you should probably\n"
+	"leave this blank.\n",
+search_help[] =
+	"\n"
+	"Search for symbols and display their relations.\n"
+	"Regular expressions are allowed.\n"
+	"Example: search for \"^FOO\"\n"
+	"Result:\n"
+	"-----------------------------------------------------------------\n"
+	"Symbol: FOO [=m]\n"
+	"Type  : tristate\n"
+	"Prompt: Foo bus is used to drive the bar HW\n"
+	"  Location:\n"
+	"    -> Bus options (PCI, PCMCIA, EISA, ISA)\n"
+	"      -> PCI support (PCI [=y])\n"
+	"(1)     -> PCI access mode (<choice> [=y])\n"
+	"  Defined at drivers/pci/Kconfig:47\n"
+	"  Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
+	"  Selects: LIBCRC32\n"
+	"  Selected by: BAR [=n]\n"
+	"-----------------------------------------------------------------\n"
+	"o The line 'Type:' shows the type of the configuration option for\n"
+	"  this symbol (bool, tristate, string, ...)\n"
+	"o The line 'Prompt:' shows the text used in the menu structure for\n"
+	"  this symbol\n"
+	"o The 'Defined at' line tells at what file / line number the symbol\n"
+	"  is defined\n"
+	"o The 'Depends on:' line tells what symbols need to be defined for\n"
+	"  this symbol to be visible in the menu (selectable)\n"
+	"o The 'Location:' lines tells where in the menu structure this symbol\n"
+	"  is located\n"
+	"    A location followed by a [=y] indicates that this is a\n"
+	"    selectable menu item - and the current value is displayed inside\n"
+	"    brackets.\n"
+	"    Press the key in the (#) prefix to jump directly to that\n"
+	"    location. You will be returned to the current search results\n"
+	"    after exiting this new menu.\n"
+	"o The 'Selects:' line tells what symbols will be automatically\n"
+	"  selected if this symbol is selected (y or m)\n"
+	"o The 'Selected by' line tells what symbol has selected this symbol\n"
+	"\n"
+	"Only relevant lines are shown.\n"
+	"\n\n"
+	"Search examples:\n"
+	"Examples: USB	=> find all symbols containing USB\n"
+	"          ^USB => find all symbols starting with USB\n"
+	"          USB$ => find all symbols ending with USB\n"
+	"\n";
+
+static int indent;
+static struct menu *current_menu;
+static int child_count;
+static int single_menu_mode;
+static int show_all_options;
+static int save_and_exit;
+static int silent;
+
+static void conf(struct menu *menu, struct menu *active_menu);
+static void conf_choice(struct menu *menu);
+static void conf_string(struct menu *menu);
+static void conf_load(void);
+static void conf_save(void);
+static int show_textbox_ext(const char *title, char *text, int r, int c,
+			    int *keys, int *vscroll, int *hscroll,
+			    update_text_fn update_text, void *data);
+static void show_textbox(const char *title, const char *text, int r, int c);
+static void show_helptext(const char *title, const char *text);
+static void show_help(struct menu *menu);
+
+static char filename[PATH_MAX+1];
+static void set_config_filename(const char *config_filename)
+{
+	static char menu_backtitle[PATH_MAX+128];
+
+	snprintf(menu_backtitle, sizeof(menu_backtitle), "%s - %s",
+		 config_filename, rootmenu.prompt->text);
+	set_dialog_backtitle(menu_backtitle);
+
+	snprintf(filename, sizeof(filename), "%s", config_filename);
+}
+
+struct subtitle_part {
+	struct list_head entries;
+	const char *text;
+};
+static LIST_HEAD(trail);
+
+static struct subtitle_list *subtitles;
+static void set_subtitle(void)
+{
+	struct subtitle_part *sp;
+	struct subtitle_list *pos, *tmp;
+
+	for (pos = subtitles; pos != NULL; pos = tmp) {
+		tmp = pos->next;
+		free(pos);
+	}
+
+	subtitles = NULL;
+	list_for_each_entry(sp, &trail, entries) {
+		if (sp->text) {
+			if (pos) {
+				pos->next = xcalloc(1, sizeof(*pos));
+				pos = pos->next;
+			} else {
+				subtitles = pos = xcalloc(1, sizeof(*pos));
+			}
+			pos->text = sp->text;
+		}
+	}
+
+	set_dialog_subtitles(subtitles);
+}
+
+static void reset_subtitle(void)
+{
+	struct subtitle_list *pos, *tmp;
+
+	for (pos = subtitles; pos != NULL; pos = tmp) {
+		tmp = pos->next;
+		free(pos);
+	}
+	subtitles = NULL;
+	set_dialog_subtitles(subtitles);
+}
+
+struct search_data {
+	struct list_head *head;
+	struct menu **targets;
+	int *keys;
+};
+
+static void update_text(char *buf, size_t start, size_t end, void *_data)
+{
+	struct search_data *data = _data;
+	struct jump_key *pos;
+	int k = 0;
+
+	list_for_each_entry(pos, data->head, entries) {
+		if (pos->offset >= start && pos->offset < end) {
+			char header[4];
+
+			if (k < JUMP_NB) {
+				int key = '0' + (pos->index % JUMP_NB) + 1;
+
+				sprintf(header, "(%c)", key);
+				data->keys[k] = key;
+				data->targets[k] = pos->target;
+				k++;
+			} else {
+				sprintf(header, "   ");
+			}
+
+			memcpy(buf + pos->offset, header, sizeof(header) - 1);
+		}
+	}
+	data->keys[k] = 0;
+}
+
+static void search_conf(void)
+{
+	struct symbol **sym_arr;
+	struct gstr res;
+	struct gstr title;
+	char *dialog_input;
+	int dres, vscroll = 0, hscroll = 0;
+	bool again;
+	struct gstr sttext;
+	struct subtitle_part stpart;
+
+	title = str_new();
+	str_printf( &title, "Enter (sub)string or regexp to search for "
+			      "(with or without \"%s\")", CONFIG_);
+
+again:
+	dialog_clear();
+	dres = dialog_inputbox("Search Configuration Parameter",
+			      str_get(&title),
+			      10, 75, "");
+	switch (dres) {
+	case 0:
+		break;
+	case 1:
+		show_helptext("Search Configuration", search_help);
+		goto again;
+	default:
+		str_free(&title);
+		return;
+	}
+
+	/* strip the prefix if necessary */
+	dialog_input = dialog_input_result;
+	if (strncasecmp(dialog_input_result, CONFIG_, strlen(CONFIG_)) == 0)
+		dialog_input += strlen(CONFIG_);
+
+	sttext = str_new();
+	str_printf(&sttext, "Search (%s)", dialog_input_result);
+	stpart.text = str_get(&sttext);
+	list_add_tail(&stpart.entries, &trail);
+
+	sym_arr = sym_re_search(dialog_input);
+	do {
+		LIST_HEAD(head);
+		struct menu *targets[JUMP_NB];
+		int keys[JUMP_NB + 1], i;
+		struct search_data data = {
+			.head = &head,
+			.targets = targets,
+			.keys = keys,
+		};
+		struct jump_key *pos, *tmp;
+
+		res = get_relations_str(sym_arr, &head);
+		set_subtitle();
+		dres = show_textbox_ext("Search Results", str_get(&res), 0, 0,
+					keys, &vscroll, &hscroll, &update_text,
+					&data);
+		again = false;
+		for (i = 0; i < JUMP_NB && keys[i]; i++)
+			if (dres == keys[i]) {
+				conf(targets[i]->parent, targets[i]);
+				again = true;
+			}
+		str_free(&res);
+		list_for_each_entry_safe(pos, tmp, &head, entries)
+			free(pos);
+	} while (again);
+	free(sym_arr);
+	str_free(&title);
+	list_del(trail.prev);
+	str_free(&sttext);
+}
+
+static void build_conf(struct menu *menu)
+{
+	struct symbol *sym;
+	struct property *prop;
+	struct menu *child;
+	int type, tmp, doint = 2;
+	tristate val;
+	char ch;
+	bool visible;
+
+	/*
+	 * note: menu_is_visible() has side effect that it will
+	 * recalc the value of the symbol.
+	 */
+	visible = menu_is_visible(menu);
+	if (show_all_options && !menu_has_prompt(menu))
+		return;
+	else if (!show_all_options && !visible)
+		return;
+
+	sym = menu->sym;
+	prop = menu->prompt;
+	if (!sym) {
+		if (prop && menu != current_menu) {
+			const char *prompt = menu_get_prompt(menu);
+			switch (prop->type) {
+			case P_MENU:
+				child_count++;
+				if (single_menu_mode) {
+					item_make("%s%*c%s",
+						  menu->data ? "-->" : "++>",
+						  indent + 1, ' ', prompt);
+				} else
+					item_make("   %*c%s  %s",
+						  indent + 1, ' ', prompt,
+						  menu_is_empty(menu) ? "----" : "--->");
+				item_set_tag('m');
+				item_set_data(menu);
+				if (single_menu_mode && menu->data)
+					goto conf_childs;
+				return;
+			case P_COMMENT:
+				if (prompt) {
+					child_count++;
+					item_make("   %*c*** %s ***", indent + 1, ' ', prompt);
+					item_set_tag(':');
+					item_set_data(menu);
+				}
+				break;
+			default:
+				if (prompt) {
+					child_count++;
+					item_make("---%*c%s", indent + 1, ' ', prompt);
+					item_set_tag(':');
+					item_set_data(menu);
+				}
+			}
+		} else
+			doint = 0;
+		goto conf_childs;
+	}
+
+	type = sym_get_type(sym);
+	if (sym_is_choice(sym)) {
+		struct symbol *def_sym = sym_get_choice_value(sym);
+		struct menu *def_menu = NULL;
+
+		child_count++;
+		for (child = menu->list; child; child = child->next) {
+			if (menu_is_visible(child) && child->sym == def_sym)
+				def_menu = child;
+		}
+
+		val = sym_get_tristate_value(sym);
+		if (sym_is_changeable(sym)) {
+			switch (type) {
+			case S_BOOLEAN:
+				item_make("[%c]", val == no ? ' ' : '*');
+				break;
+			case S_TRISTATE:
+				switch (val) {
+				case yes: ch = '*'; break;
+				case mod: ch = 'M'; break;
+				default:  ch = ' '; break;
+				}
+				item_make("<%c>", ch);
+				break;
+			}
+			item_set_tag('t');
+			item_set_data(menu);
+		} else {
+			item_make("   ");
+			item_set_tag(def_menu ? 't' : ':');
+			item_set_data(menu);
+		}
+
+		item_add_str("%*c%s", indent + 1, ' ', menu_get_prompt(menu));
+		if (val == yes) {
+			if (def_menu) {
+				item_add_str(" (%s)", menu_get_prompt(def_menu));
+				item_add_str("  --->");
+				if (def_menu->list) {
+					indent += 2;
+					build_conf(def_menu);
+					indent -= 2;
+				}
+			}
+			return;
+		}
+	} else {
+		if (menu == current_menu) {
+			item_make("---%*c%s", indent + 1, ' ', menu_get_prompt(menu));
+			item_set_tag(':');
+			item_set_data(menu);
+			goto conf_childs;
+		}
+		child_count++;
+		val = sym_get_tristate_value(sym);
+		if (sym_is_choice_value(sym) && val == yes) {
+			item_make("   ");
+			item_set_tag(':');
+			item_set_data(menu);
+		} else {
+			switch (type) {
+			case S_BOOLEAN:
+				if (sym_is_changeable(sym))
+					item_make("[%c]", val == no ? ' ' : '*');
+				else
+					item_make("-%c-", val == no ? ' ' : '*');
+				item_set_tag('t');
+				item_set_data(menu);
+				break;
+			case S_TRISTATE:
+				switch (val) {
+				case yes: ch = '*'; break;
+				case mod: ch = 'M'; break;
+				default:  ch = ' '; break;
+				}
+				if (sym_is_changeable(sym)) {
+					if (sym->rev_dep.tri == mod)
+						item_make("{%c}", ch);
+					else
+						item_make("<%c>", ch);
+				} else
+					item_make("-%c-", ch);
+				item_set_tag('t');
+				item_set_data(menu);
+				break;
+			default:
+				tmp = 2 + strlen(sym_get_string_value(sym)); /* () = 2 */
+				item_make("(%s)", sym_get_string_value(sym));
+				tmp = indent - tmp + 4;
+				if (tmp < 0)
+					tmp = 0;
+				item_add_str("%*c%s%s", tmp, ' ', menu_get_prompt(menu),
+					     (sym_has_value(sym) || !sym_is_changeable(sym)) ?
+					     "" : " (NEW)");
+				item_set_tag('s');
+				item_set_data(menu);
+				goto conf_childs;
+			}
+		}
+		item_add_str("%*c%s%s", indent + 1, ' ', menu_get_prompt(menu),
+			  (sym_has_value(sym) || !sym_is_changeable(sym)) ?
+			  "" : " (NEW)");
+		if (menu->prompt->type == P_MENU) {
+			item_add_str("  %s", menu_is_empty(menu) ? "----" : "--->");
+			return;
+		}
+	}
+
+conf_childs:
+	indent += doint;
+	for (child = menu->list; child; child = child->next)
+		build_conf(child);
+	indent -= doint;
+}
+
+static void conf(struct menu *menu, struct menu *active_menu)
+{
+	struct menu *submenu;
+	const char *prompt = menu_get_prompt(menu);
+	struct subtitle_part stpart;
+	struct symbol *sym;
+	int res;
+	int s_scroll = 0;
+
+	if (menu != &rootmenu)
+		stpart.text = menu_get_prompt(menu);
+	else
+		stpart.text = NULL;
+	list_add_tail(&stpart.entries, &trail);
+
+	while (1) {
+		item_reset();
+		current_menu = menu;
+		build_conf(menu);
+		if (!child_count)
+			break;
+		set_subtitle();
+		dialog_clear();
+		res = dialog_menu(prompt ? prompt : "Main Menu",
+				  menu_instructions,
+				  active_menu, &s_scroll);
+		if (res == 1 || res == KEY_ESC || res == -ERRDISPLAYTOOSMALL)
+			break;
+		if (item_count() != 0) {
+			if (!item_activate_selected())
+				continue;
+			if (!item_tag())
+				continue;
+		}
+		submenu = item_data();
+		active_menu = item_data();
+		if (submenu)
+			sym = submenu->sym;
+		else
+			sym = NULL;
+
+		switch (res) {
+		case 0:
+			switch (item_tag()) {
+			case 'm':
+				if (single_menu_mode)
+					submenu->data = (void *) (long) !submenu->data;
+				else
+					conf(submenu, NULL);
+				break;
+			case 't':
+				if (sym_is_choice(sym) && sym_get_tristate_value(sym) == yes)
+					conf_choice(submenu);
+				else if (submenu->prompt->type == P_MENU)
+					conf(submenu, NULL);
+				break;
+			case 's':
+				conf_string(submenu);
+				break;
+			}
+			break;
+		case 2:
+			if (sym)
+				show_help(submenu);
+			else {
+				reset_subtitle();
+				show_helptext("README", mconf_readme);
+			}
+			break;
+		case 3:
+			reset_subtitle();
+			conf_save();
+			break;
+		case 4:
+			reset_subtitle();
+			conf_load();
+			break;
+		case 5:
+			if (item_is_tag('t')) {
+				if (sym_set_tristate_value(sym, yes))
+					break;
+				if (sym_set_tristate_value(sym, mod))
+					show_textbox(NULL, setmod_text, 6, 74);
+			}
+			break;
+		case 6:
+			if (item_is_tag('t'))
+				sym_set_tristate_value(sym, no);
+			break;
+		case 7:
+			if (item_is_tag('t'))
+				sym_set_tristate_value(sym, mod);
+			break;
+		case 8:
+			if (item_is_tag('t'))
+				sym_toggle_tristate_value(sym);
+			else if (item_is_tag('m'))
+				conf(submenu, NULL);
+			break;
+		case 9:
+			search_conf();
+			break;
+		case 10:
+			show_all_options = !show_all_options;
+			break;
+		}
+	}
+
+	list_del(trail.prev);
+}
+
+static int show_textbox_ext(const char *title, char *text, int r, int c, int
+			    *keys, int *vscroll, int *hscroll, update_text_fn
+			    update_text, void *data)
+{
+	dialog_clear();
+	return dialog_textbox(title, text, r, c, keys, vscroll, hscroll,
+			      update_text, data);
+}
+
+static void show_textbox(const char *title, const char *text, int r, int c)
+{
+	show_textbox_ext(title, (char *) text, r, c, (int []) {0}, NULL, NULL,
+			 NULL, NULL);
+}
+
+static void show_helptext(const char *title, const char *text)
+{
+	show_textbox(title, text, 0, 0);
+}
+
+static void conf_message_callback(const char *s)
+{
+	if (save_and_exit) {
+		if (!silent)
+			printf("%s", s);
+	} else {
+		show_textbox(NULL, s, 6, 60);
+	}
+}
+
+static void show_help(struct menu *menu)
+{
+	struct gstr help = str_new();
+
+	help.max_width = getmaxx(stdscr) - 10;
+	menu_get_ext_help(menu, &help);
+
+	show_helptext(menu_get_prompt(menu), str_get(&help));
+	str_free(&help);
+}
+
+static void conf_choice(struct menu *menu)
+{
+	const char *prompt = menu_get_prompt(menu);
+	struct menu *child;
+	struct symbol *active;
+
+	active = sym_get_choice_value(menu->sym);
+	while (1) {
+		int res;
+		int selected;
+		item_reset();
+
+		current_menu = menu;
+		for (child = menu->list; child; child = child->next) {
+			if (!menu_is_visible(child))
+				continue;
+			if (child->sym)
+				item_make("%s", menu_get_prompt(child));
+			else {
+				item_make("*** %s ***", menu_get_prompt(child));
+				item_set_tag(':');
+			}
+			item_set_data(child);
+			if (child->sym == active)
+				item_set_selected(1);
+			if (child->sym == sym_get_choice_value(menu->sym))
+				item_set_tag('X');
+		}
+		dialog_clear();
+		res = dialog_checklist(prompt ? prompt : "Main Menu",
+					radiolist_instructions,
+					MENUBOX_HEIGTH_MIN,
+					MENUBOX_WIDTH_MIN,
+					CHECKLIST_HEIGTH_MIN);
+		selected = item_activate_selected();
+		switch (res) {
+		case 0:
+			if (selected) {
+				child = item_data();
+				if (!child->sym)
+					break;
+
+				sym_set_tristate_value(child->sym, yes);
+			}
+			return;
+		case 1:
+			if (selected) {
+				child = item_data();
+				show_help(child);
+				active = child->sym;
+			} else
+				show_help(menu);
+			break;
+		case KEY_ESC:
+			return;
+		case -ERRDISPLAYTOOSMALL:
+			return;
+		}
+	}
+}
+
+static void conf_string(struct menu *menu)
+{
+	const char *prompt = menu_get_prompt(menu);
+
+	while (1) {
+		int res;
+		const char *heading;
+
+		switch (sym_get_type(menu->sym)) {
+		case S_INT:
+			heading = inputbox_instructions_int;
+			break;
+		case S_HEX:
+			heading = inputbox_instructions_hex;
+			break;
+		case S_STRING:
+			heading = inputbox_instructions_string;
+			break;
+		default:
+			heading = "Internal mconf error!";
+		}
+		dialog_clear();
+		res = dialog_inputbox(prompt ? prompt : "Main Menu",
+				      heading, 10, 75,
+				      sym_get_string_value(menu->sym));
+		switch (res) {
+		case 0:
+			if (sym_set_string_value(menu->sym, dialog_input_result))
+				return;
+			show_textbox(NULL, "You have made an invalid entry.", 5, 43);
+			break;
+		case 1:
+			show_help(menu);
+			break;
+		case KEY_ESC:
+			return;
+		}
+	}
+}
+
+static void conf_load(void)
+{
+
+	while (1) {
+		int res;
+		dialog_clear();
+		res = dialog_inputbox(NULL, load_config_text,
+				      11, 55, filename);
+		switch(res) {
+		case 0:
+			if (!dialog_input_result[0])
+				return;
+			if (!conf_read(dialog_input_result)) {
+				set_config_filename(dialog_input_result);
+				conf_set_changed(true);
+				return;
+			}
+			show_textbox(NULL, "File does not exist!", 5, 38);
+			break;
+		case 1:
+			show_helptext("Load Alternate Configuration", load_config_help);
+			break;
+		case KEY_ESC:
+			return;
+		}
+	}
+}
+
+static void conf_save(void)
+{
+	while (1) {
+		int res;
+		dialog_clear();
+		res = dialog_inputbox(NULL, save_config_text,
+				      11, 55, filename);
+		switch(res) {
+		case 0:
+			if (!dialog_input_result[0])
+				return;
+			if (!conf_write(dialog_input_result)) {
+				set_config_filename(dialog_input_result);
+				return;
+			}
+			show_textbox(NULL, "Can't create file!", 5, 60);
+			break;
+		case 1:
+			show_helptext("Save Alternate Configuration", save_config_help);
+			break;
+		case KEY_ESC:
+			return;
+		}
+	}
+}
+
+static int handle_exit(void)
+{
+	int res;
+
+	save_and_exit = 1;
+	reset_subtitle();
+	dialog_clear();
+	if (conf_get_changed())
+		res = dialog_yesno(NULL,
+				   "Do you wish to save your new configuration?\n"
+				     "(Press <ESC><ESC> to continue kernel configuration.)",
+				   6, 60);
+	else
+		res = -1;
+
+	end_dialog(saved_x, saved_y);
+
+	switch (res) {
+	case 0:
+		if (conf_write(filename)) {
+			fprintf(stderr, "\n\n"
+					  "Error while writing of the configuration.\n"
+					  "Your configuration changes were NOT saved."
+					  "\n\n");
+			return 1;
+		}
+		conf_write_autoconf(0);
+		/* fall through */
+	case -1:
+		if (!silent)
+			printf("\n\n"
+				 "*** End of the configuration.\n"
+				 "*** Execute 'make' to start the build or try 'make help'."
+				 "\n\n");
+		res = 0;
+		break;
+	default:
+		if (!silent)
+			fprintf(stderr, "\n\n"
+					  "Your configuration changes were NOT saved."
+					  "\n\n");
+		if (res != KEY_ESC)
+			res = 0;
+	}
+
+	return res;
+}
+
+static void sig_handler(int signo)
+{
+	exit(handle_exit());
+}
+
+int main(int ac, char **av)
+{
+	char *mode;
+	int res;
+
+	signal(SIGINT, sig_handler);
+
+	if (ac > 1 && strcmp(av[1], "-s") == 0) {
+		silent = 1;
+		/* Silence conf_read() until the real callback is set up */
+		conf_set_message_callback(NULL);
+		av++;
+	}
+	conf_parse(av[1]);
+	conf_read(NULL);
+
+	mode = getenv("MENUCONFIG_MODE");
+	if (mode) {
+		if (!strcasecmp(mode, "single_menu"))
+			single_menu_mode = 1;
+	}
+
+	if (init_dialog(NULL)) {
+		fprintf(stderr, "Your display is too small to run Menuconfig!\n");
+		fprintf(stderr, "It must be at least 19 lines by 80 columns.\n");
+		return 1;
+	}
+
+	set_config_filename(conf_get_configname());
+	conf_set_message_callback(conf_message_callback);
+	do {
+		conf(&rootmenu, NULL);
+		res = handle_exit();
+	} while (res == KEY_ESC);
+
+	return res;
+}