Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 237 insertions, 0 deletions

diff --git a/scripts/package/builddeb b/scripts/package/builddeb
new file mode 100755
index 000000000..67cd420dc
--- /dev/null
+++ b/scripts/package/builddeb
@@ -0,0 +1,237 @@
+#!/bin/sh
+#
+# builddeb 1.3
+# Copyright 2003 Wichert Akkerman <wichert@wiggy.net>
+#
+# Simple script to generate a deb package for a Linux kernel. All the
+# complexity of what to do with a kernel after it is installed or removed
+# is left to other scripts and packages: they can install scripts in the
+# /etc/kernel/{pre,post}{inst,rm}.d/ directories (or an alternative location
+# specified in KDEB_HOOKDIR) that will be called on package install and
+# removal.
+
+set -e
+
+is_enabled() {
+	grep -q "^$1=y" include/config/auto.conf
+}
+
+if_enabled_echo() {
+	if is_enabled "$1"; then
+		echo -n "$2"
+	elif [ $# -ge 3 ]; then
+		echo -n "$3"
+	fi
+}
+
+create_package() {
+	local pname="$1" pdir="$2"
+	local dpkg_deb_opts
+
+	mkdir -m 755 -p "$pdir/DEBIAN"
+	mkdir -p "$pdir/usr/share/doc/$pname"
+	cp debian/copyright "$pdir/usr/share/doc/$pname/"
+	cp debian/changelog "$pdir/usr/share/doc/$pname/changelog.Debian"
+	gzip -n -9 "$pdir/usr/share/doc/$pname/changelog.Debian"
+	sh -c "cd '$pdir'; find . -type f ! -path './DEBIAN/*' -printf '%P\0' \
+		| xargs -r0 md5sum > DEBIAN/md5sums"
+
+	# Fix ownership and permissions
+	if [ "$DEB_RULES_REQUIRES_ROOT" = "no" ]; then
+		dpkg_deb_opts="--root-owner-group"
+	else
+		chown -R root:root "$pdir"
+	fi
+	chmod -R go-w "$pdir"
+	# in case we are in a restrictive umask environment like 0077
+	chmod -R a+rX "$pdir"
+	# in case we build in a setuid/setgid directory
+	chmod -R ug-s "$pdir"
+
+	# Create the package
+	dpkg-gencontrol -p$pname -P"$pdir"
+	dpkg-deb $dpkg_deb_opts ${KDEB_COMPRESS:+-Z$KDEB_COMPRESS} --build "$pdir" ..
+}
+
+deploy_kernel_headers () {
+	pdir=$1
+
+	rm -rf $pdir
+
+	(
+		cd $srctree
+		find . arch/$SRCARCH -maxdepth 1 -name Makefile\*
+		find include scripts -type f -o -type l
+		find arch/$SRCARCH -name Kbuild.platforms -o -name Platform
+		find $(find arch/$SRCARCH -name include -o -name scripts -type d) -type f
+	) > debian/hdrsrcfiles
+
+	{
+		if is_enabled CONFIG_OBJTOOL; then
+			echo tools/objtool/objtool
+		fi
+
+		find arch/$SRCARCH/include Module.symvers include scripts -type f
+
+		if is_enabled CONFIG_GCC_PLUGINS; then
+			find scripts/gcc-plugins -name \*.so
+		fi
+	} > debian/hdrobjfiles
+
+	destdir=$pdir/usr/src/linux-headers-$version
+	mkdir -p $destdir
+	tar -c -f - -C $srctree -T debian/hdrsrcfiles | tar -xf - -C $destdir
+	tar -c -f - -T debian/hdrobjfiles | tar -xf - -C $destdir
+	rm -f debian/hdrsrcfiles debian/hdrobjfiles
+
+	# copy .config manually to be where it's expected to be
+	cp $KCONFIG_CONFIG $destdir/.config
+
+	mkdir -p $pdir/lib/modules/$version/
+	ln -s /usr/src/linux-headers-$version $pdir/lib/modules/$version/build
+}
+
+deploy_libc_headers () {
+	pdir=$1
+
+	rm -rf $pdir
+
+	$MAKE -f $srctree/Makefile headers
+	$MAKE -f $srctree/Makefile headers_install INSTALL_HDR_PATH=$pdir/usr
+
+	# move asm headers to /usr/include/<libc-machine>/asm to match the structure
+	# used by Debian-based distros (to support multi-arch)
+	host_arch=$(dpkg-architecture -a$(cat debian/arch) -qDEB_HOST_MULTIARCH)
+	mkdir $pdir/usr/include/$host_arch
+	mv $pdir/usr/include/asm $pdir/usr/include/$host_arch/
+}
+
+version=$KERNELRELEASE
+tmpdir=debian/linux-image
+dbg_dir=debian/linux-image-dbg
+packagename=linux-image-$version
+dbg_packagename=$packagename-dbg
+
+if [ "$ARCH" = "um" ] ; then
+	packagename=user-mode-linux-$version
+fi
+
+# Not all arches have the same installed path in debian
+# XXX: have each arch Makefile export a variable of the canonical image install
+# path instead
+case $ARCH in
+um)
+	installed_image_path="usr/bin/linux-$version"
+	;;
+parisc|mips|powerpc)
+	installed_image_path="boot/vmlinux-$version"
+	;;
+*)
+	installed_image_path="boot/vmlinuz-$version"
+esac
+
+BUILD_DEBUG=$(if_enabled_echo CONFIG_DEBUG_INFO Yes)
+
+# Setup the directory structure
+rm -rf "$tmpdir" "$dbg_dir" debian/files
+mkdir -m 755 -p "$tmpdir/DEBIAN"
+mkdir -p "$tmpdir/lib" "$tmpdir/boot"
+
+# Install the kernel
+if [ "$ARCH" = "um" ] ; then
+	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/bin" "$tmpdir/usr/share/doc/$packagename"
+	cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map"
+	cp $KCONFIG_CONFIG "$tmpdir/usr/share/doc/$packagename/config"
+	gzip "$tmpdir/usr/share/doc/$packagename/config"
+else
+	cp System.map "$tmpdir/boot/System.map-$version"
+	cp $KCONFIG_CONFIG "$tmpdir/boot/config-$version"
+fi
+cp "$($MAKE -s -f $srctree/Makefile image_name)" "$tmpdir/$installed_image_path"
+
+if is_enabled CONFIG_OF_EARLY_FLATTREE; then
+	# Only some architectures with OF support have this target
+	if [ -d "${srctree}/arch/$SRCARCH/boot/dts" ]; then
+		$MAKE -f $srctree/Makefile INSTALL_DTBS_PATH="$tmpdir/usr/lib/$packagename" dtbs_install
+	fi
+fi
+
+if is_enabled CONFIG_MODULES; then
+	INSTALL_MOD_PATH="$tmpdir" $MAKE -f $srctree/Makefile modules_install
+	rm -f "$tmpdir/lib/modules/$version/build"
+	rm -f "$tmpdir/lib/modules/$version/source"
+	if [ "$ARCH" = "um" ] ; then
+		mv "$tmpdir/lib/modules/$version"/* "$tmpdir/usr/lib/uml/modules/$version/"
+		rmdir "$tmpdir/lib/modules/$version"
+	fi
+	if [ -n "$BUILD_DEBUG" ] ; then
+		for module in $(find $tmpdir/lib/modules/ -name *.ko -printf '%P\n'); do
+			module=lib/modules/$module
+			mkdir -p $(dirname $dbg_dir/usr/lib/debug/$module)
+			# only keep debug symbols in the debug file
+			$OBJCOPY --only-keep-debug $tmpdir/$module $dbg_dir/usr/lib/debug/$module
+			# strip original module from debug symbols
+			$OBJCOPY --strip-debug $tmpdir/$module
+			# then add a link to those
+			$OBJCOPY --add-gnu-debuglink=$dbg_dir/usr/lib/debug/$module $tmpdir/$module
+		done
+
+		# resign stripped modules
+		if is_enabled CONFIG_MODULE_SIG_ALL; then
+			INSTALL_MOD_PATH="$tmpdir" $MAKE -f $srctree/Makefile modules_sign
+		fi
+	fi
+fi
+
+# Install the maintainer scripts
+# Note: hook scripts under /etc/kernel are also executed by official Debian
+# kernel packages, as well as kernel packages built using make-kpkg.
+# make-kpkg sets $INITRD to indicate whether an initramfs is wanted, and
+# so do we; recent versions of dracut and initramfs-tools will obey this.
+debhookdir=${KDEB_HOOKDIR:-/etc/kernel}
+for script in postinst postrm preinst prerm ; do
+	mkdir -p "$tmpdir$debhookdir/$script.d"
+	cat <<EOF > "$tmpdir/DEBIAN/$script"
+#!/bin/sh
+
+set -e
+
+# Pass maintainer script parameters to hook scripts
+export DEB_MAINT_PARAMS="\$*"
+
+# Tell initramfs builder whether it's wanted
+export INITRD=$(if_enabled_echo CONFIG_BLK_DEV_INITRD Yes No)
+
+test -d $debhookdir/$script.d && run-parts --arg="$version" --arg="/$installed_image_path" $debhookdir/$script.d
+exit 0
+EOF
+	chmod 755 "$tmpdir/DEBIAN/$script"
+done
+
+if [ "$ARCH" != "um" ]; then
+	if is_enabled CONFIG_MODULES; then
+		deploy_kernel_headers debian/linux-headers
+		create_package linux-headers-$version debian/linux-headers
+	fi
+
+	deploy_libc_headers debian/linux-libc-dev
+	create_package linux-libc-dev debian/linux-libc-dev
+fi
+
+create_package "$packagename" "$tmpdir"
+
+if [ -n "$BUILD_DEBUG" ] ; then
+	# Build debug package
+	# Different tools want the image in different locations
+	# perf
+	mkdir -p $dbg_dir/usr/lib/debug/lib/modules/$version/
+	cp vmlinux $dbg_dir/usr/lib/debug/lib/modules/$version/
+	# systemtap
+	mkdir -p $dbg_dir/usr/lib/debug/boot/
+	ln -s ../lib/modules/$version/vmlinux $dbg_dir/usr/lib/debug/boot/vmlinux-$version
+	# kdump-tools
+	ln -s lib/modules/$version/vmlinux $dbg_dir/usr/lib/debug/vmlinux-$version
+	create_package "$dbg_packagename" "$dbg_dir"
+fi
+
+exit 0