Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 207 insertions, 0 deletions

diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
new file mode 100644
index 000000000..749e2a4dc
--- /dev/null
+++ b/security/keys/user_defined.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* user_defined.c: user defined key type
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+#include <keys/user-type.h>
+#include <linux/uaccess.h>
+#include "internal.h"
+
+static int logon_vet_description(const char *desc);
+
+/*
+ * user defined keys take an arbitrary string as the description and an
+ * arbitrary blob of data as the payload
+ */
+struct key_type key_type_user = {
+	.name			= "user",
+	.preparse		= user_preparse,
+	.free_preparse		= user_free_preparse,
+	.instantiate		= generic_key_instantiate,
+	.update			= user_update,
+	.revoke			= user_revoke,
+	.destroy		= user_destroy,
+	.describe		= user_describe,
+	.read			= user_read,
+};
+
+EXPORT_SYMBOL_GPL(key_type_user);
+
+/*
+ * This key type is essentially the same as key_type_user, but it does
+ * not define a .read op. This is suitable for storing username and
+ * password pairs in the keyring that you do not want to be readable
+ * from userspace.
+ */
+struct key_type key_type_logon = {
+	.name			= "logon",
+	.preparse		= user_preparse,
+	.free_preparse		= user_free_preparse,
+	.instantiate		= generic_key_instantiate,
+	.update			= user_update,
+	.revoke			= user_revoke,
+	.destroy		= user_destroy,
+	.describe		= user_describe,
+	.vet_description	= logon_vet_description,
+};
+EXPORT_SYMBOL_GPL(key_type_logon);
+
+/*
+ * Preparse a user defined key payload
+ */
+int user_preparse(struct key_preparsed_payload *prep)
+{
+	struct user_key_payload *upayload;
+	size_t datalen = prep->datalen;
+
+	if (datalen <= 0 || datalen > 32767 || !prep->data)
+		return -EINVAL;
+
+	upayload = kmalloc(sizeof(*upayload) + datalen, GFP_KERNEL);
+	if (!upayload)
+		return -ENOMEM;
+
+	/* attach the data */
+	prep->quotalen = datalen;
+	prep->payload.data[0] = upayload;
+	upayload->datalen = datalen;
+	memcpy(upayload->data, prep->data, datalen);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(user_preparse);
+
+/*
+ * Free a preparse of a user defined key payload
+ */
+void user_free_preparse(struct key_preparsed_payload *prep)
+{
+	kfree_sensitive(prep->payload.data[0]);
+}
+EXPORT_SYMBOL_GPL(user_free_preparse);
+
+static void user_free_payload_rcu(struct rcu_head *head)
+{
+	struct user_key_payload *payload;
+
+	payload = container_of(head, struct user_key_payload, rcu);
+	kfree_sensitive(payload);
+}
+
+/*
+ * update a user defined key
+ * - the key's semaphore is write-locked
+ */
+int user_update(struct key *key, struct key_preparsed_payload *prep)
+{
+	struct user_key_payload *zap = NULL;
+	int ret;
+
+	/* check the quota and attach the new data */
+	ret = key_payload_reserve(key, prep->datalen);
+	if (ret < 0)
+		return ret;
+
+	/* attach the new data, displacing the old */
+	key->expiry = prep->expiry;
+	if (key_is_positive(key))
+		zap = dereference_key_locked(key);
+	rcu_assign_keypointer(key, prep->payload.data[0]);
+	prep->payload.data[0] = NULL;
+
+	if (zap)
+		call_rcu(&zap->rcu, user_free_payload_rcu);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(user_update);
+
+/*
+ * dispose of the links from a revoked keyring
+ * - called with the key sem write-locked
+ */
+void user_revoke(struct key *key)
+{
+	struct user_key_payload *upayload = user_key_payload_locked(key);
+
+	/* clear the quota */
+	key_payload_reserve(key, 0);
+
+	if (upayload) {
+		rcu_assign_keypointer(key, NULL);
+		call_rcu(&upayload->rcu, user_free_payload_rcu);
+	}
+}
+
+EXPORT_SYMBOL(user_revoke);
+
+/*
+ * dispose of the data dangling from the corpse of a user key
+ */
+void user_destroy(struct key *key)
+{
+	struct user_key_payload *upayload = key->payload.data[0];
+
+	kfree_sensitive(upayload);
+}
+
+EXPORT_SYMBOL_GPL(user_destroy);
+
+/*
+ * describe the user key
+ */
+void user_describe(const struct key *key, struct seq_file *m)
+{
+	seq_puts(m, key->description);
+	if (key_is_positive(key))
+		seq_printf(m, ": %u", key->datalen);
+}
+
+EXPORT_SYMBOL_GPL(user_describe);
+
+/*
+ * read the key data
+ * - the key's semaphore is read-locked
+ */
+long user_read(const struct key *key, char *buffer, size_t buflen)
+{
+	const struct user_key_payload *upayload;
+	long ret;
+
+	upayload = user_key_payload_locked(key);
+	ret = upayload->datalen;
+
+	/* we can return the data as is */
+	if (buffer && buflen > 0) {
+		if (buflen > upayload->datalen)
+			buflen = upayload->datalen;
+
+		memcpy(buffer, upayload->data, buflen);
+	}
+
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(user_read);
+
+/* Vet the description for a "logon" key */
+static int logon_vet_description(const char *desc)
+{
+	char *p;
+
+	/* require a "qualified" description string */
+	p = strchr(desc, ':');
+	if (!p)
+		return -EINVAL;
+
+	/* also reject description with ':' as first char */
+	if (p == desc)
+		return -EINVAL;
+
+	return 0;
+}