Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 210 insertions, 0 deletions

diff --git a/sound/drivers/opl3/opl3_drums.c b/sound/drivers/opl3/opl3_drums.c
new file mode 100644
index 000000000..ccc49f394
--- /dev/null
+++ b/sound/drivers/opl3/opl3_drums.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) by Uros Bizjak <uros@kss-loka.si>
+ *
+ *   OPL2/OPL3/OPL4 FM routines for internal percussion channels
+ */
+
+#include "opl3_voice.h"
+
+static const char snd_opl3_drum_table[47] =
+{
+	OPL3_BASSDRUM_ON,  OPL3_BASSDRUM_ON,  OPL3_HIHAT_ON,	/* 35 - 37 */
+	OPL3_SNAREDRUM_ON, OPL3_HIHAT_ON,     OPL3_SNAREDRUM_ON, /* 38 - 40 */
+	OPL3_BASSDRUM_ON,  OPL3_HIHAT_ON,     OPL3_BASSDRUM_ON,	/* 41 - 43 */
+	OPL3_HIHAT_ON,     OPL3_TOMTOM_ON,    OPL3_HIHAT_ON,	/* 44 - 46 */
+	OPL3_TOMTOM_ON,    OPL3_TOMTOM_ON,    OPL3_CYMBAL_ON,	/* 47 - 49 */
+
+	OPL3_TOMTOM_ON,    OPL3_CYMBAL_ON,    OPL3_CYMBAL_ON,	/* 50 - 52 */
+	OPL3_CYMBAL_ON,    OPL3_CYMBAL_ON,    OPL3_CYMBAL_ON,	/* 53 - 55 */
+	OPL3_HIHAT_ON,     OPL3_CYMBAL_ON,    OPL3_TOMTOM_ON,	/* 56 - 58 */
+	OPL3_CYMBAL_ON,    OPL3_TOMTOM_ON,    OPL3_TOMTOM_ON,	/* 59 - 61 */
+	OPL3_HIHAT_ON,     OPL3_TOMTOM_ON,    OPL3_TOMTOM_ON,	/* 62 - 64 */
+
+	OPL3_TOMTOM_ON,    OPL3_TOMTOM_ON,    OPL3_TOMTOM_ON,	/* 65 - 67 */
+	OPL3_TOMTOM_ON,    OPL3_HIHAT_ON,     OPL3_HIHAT_ON,	/* 68 - 70 */
+	OPL3_HIHAT_ON,     OPL3_HIHAT_ON,     OPL3_TOMTOM_ON,	/* 71 - 73 */
+	OPL3_TOMTOM_ON,    OPL3_TOMTOM_ON,    OPL3_TOMTOM_ON,	/* 74 - 76 */
+	OPL3_TOMTOM_ON,    OPL3_TOMTOM_ON,    OPL3_TOMTOM_ON,	/* 77 - 79 */
+	OPL3_CYMBAL_ON,    OPL3_CYMBAL_ON			/* 80 - 81 */
+};
+
+struct snd_opl3_drum_voice {
+	int voice;
+	int op;
+	unsigned char am_vib;
+	unsigned char ksl_level;
+	unsigned char attack_decay;
+	unsigned char sustain_release;
+	unsigned char feedback_connection;
+	unsigned char wave_select;
+};
+
+struct snd_opl3_drum_note {
+	int voice;
+	unsigned char fnum;
+	unsigned char octave_f;
+	unsigned char feedback_connection;
+};
+
+static const struct snd_opl3_drum_voice bass_op0 = {6, 0, 0x00, 0x32, 0xf8, 0x66, 0x30, 0x00};
+static const struct snd_opl3_drum_voice bass_op1 = {6, 1, 0x00, 0x03, 0xf6, 0x57, 0x30, 0x00};
+static const struct snd_opl3_drum_note bass_note = {6, 0x90, 0x09};
+
+static const struct snd_opl3_drum_voice hihat = {7, 0, 0x00, 0x03, 0xf0, 0x06, 0x20, 0x00};
+
+static const struct snd_opl3_drum_voice snare = {7, 1, 0x00, 0x03, 0xf0, 0x07, 0x20, 0x02};
+static const struct snd_opl3_drum_note snare_note = {7, 0xf4, 0x0d};
+
+static const struct snd_opl3_drum_voice tomtom = {8, 0, 0x02, 0x03, 0xf0, 0x06, 0x10, 0x00};
+static const struct snd_opl3_drum_note tomtom_note = {8, 0xf4, 0x09};
+
+static const struct snd_opl3_drum_voice cymbal = {8, 1, 0x04, 0x03, 0xf0, 0x06, 0x10, 0x00};
+
+/*
+ * set drum voice characteristics
+ */
+static void snd_opl3_drum_voice_set(struct snd_opl3 *opl3,
+				    const struct snd_opl3_drum_voice *data)
+{
+	unsigned char op_offset = snd_opl3_regmap[data->voice][data->op];
+	unsigned char voice_offset = data->voice;
+	unsigned short opl3_reg;
+	
+	/* Set OPL3 AM_VIB register */ 
+	opl3_reg = OPL3_LEFT | (OPL3_REG_AM_VIB + op_offset);
+	opl3->command(opl3, opl3_reg, data->am_vib);
+
+	/* Set OPL3 KSL_LEVEL register */ 
+	opl3_reg = OPL3_LEFT | (OPL3_REG_KSL_LEVEL + op_offset);
+	opl3->command(opl3, opl3_reg, data->ksl_level);
+
+	/* Set OPL3 ATTACK_DECAY register */ 
+	opl3_reg = OPL3_LEFT | (OPL3_REG_ATTACK_DECAY + op_offset);
+	opl3->command(opl3, opl3_reg, data->attack_decay);
+
+	/* Set OPL3 SUSTAIN_RELEASE register */ 
+	opl3_reg = OPL3_LEFT | (OPL3_REG_SUSTAIN_RELEASE + op_offset);
+	opl3->command(opl3, opl3_reg, data->sustain_release);
+
+	/* Set OPL3 FEEDBACK_CONNECTION register */ 
+	opl3_reg = OPL3_LEFT | (OPL3_REG_FEEDBACK_CONNECTION + voice_offset);
+	opl3->command(opl3, opl3_reg, data->feedback_connection);
+
+	/* Select waveform */
+	opl3_reg = OPL3_LEFT | (OPL3_REG_WAVE_SELECT + op_offset);
+	opl3->command(opl3, opl3_reg, data->wave_select);
+}
+
+/*
+ * Set drum voice pitch
+ */
+static void snd_opl3_drum_note_set(struct snd_opl3 *opl3,
+				   const struct snd_opl3_drum_note *data)
+{
+	unsigned char voice_offset = data->voice;
+	unsigned short opl3_reg;
+
+	/* Set OPL3 FNUM_LOW register */ 
+	opl3_reg = OPL3_LEFT | (OPL3_REG_FNUM_LOW + voice_offset);
+	opl3->command(opl3, opl3_reg, data->fnum);
+
+	/* Set OPL3 KEYON_BLOCK register */ 
+	opl3_reg = OPL3_LEFT | (OPL3_REG_KEYON_BLOCK + voice_offset);
+	opl3->command(opl3, opl3_reg, data->octave_f);
+}
+
+/*
+ * Set drum voice volume and position
+ */
+static void snd_opl3_drum_vol_set(struct snd_opl3 *opl3,
+				  const struct snd_opl3_drum_voice *data,
+				  int vel, struct snd_midi_channel *chan)
+{
+	unsigned char op_offset = snd_opl3_regmap[data->voice][data->op];
+	unsigned char voice_offset = data->voice;
+	unsigned char reg_val;
+	unsigned short opl3_reg;
+
+	/* Set OPL3 KSL_LEVEL register */ 
+	reg_val = data->ksl_level;
+	snd_opl3_calc_volume(&reg_val, vel, chan);
+	opl3_reg = OPL3_LEFT | (OPL3_REG_KSL_LEVEL + op_offset);
+	opl3->command(opl3, opl3_reg, reg_val);
+
+	/* Set OPL3 FEEDBACK_CONNECTION register */ 
+	/* Set output voice connection */
+	reg_val = data->feedback_connection | OPL3_STEREO_BITS;
+	if (chan->gm_pan < 43)
+		reg_val &= ~OPL3_VOICE_TO_RIGHT;
+	if (chan->gm_pan > 85)
+		reg_val &= ~OPL3_VOICE_TO_LEFT;
+	opl3_reg = OPL3_LEFT | (OPL3_REG_FEEDBACK_CONNECTION + voice_offset);
+	opl3->command(opl3, opl3_reg, reg_val);
+}
+
+/*
+ * Loads drum voices at init time
+ */
+void snd_opl3_load_drums(struct snd_opl3 *opl3)
+{
+	snd_opl3_drum_voice_set(opl3, &bass_op0);
+	snd_opl3_drum_voice_set(opl3, &bass_op1);
+	snd_opl3_drum_note_set(opl3, &bass_note);
+
+	snd_opl3_drum_voice_set(opl3, &hihat);
+
+	snd_opl3_drum_voice_set(opl3, &snare);
+	snd_opl3_drum_note_set(opl3, &snare_note);
+
+	snd_opl3_drum_voice_set(opl3, &tomtom);
+	snd_opl3_drum_note_set(opl3, &tomtom_note);
+
+	snd_opl3_drum_voice_set(opl3, &cymbal);
+}
+
+/*
+ * Switch drum voice on or off
+ */
+void snd_opl3_drum_switch(struct snd_opl3 *opl3, int note, int vel, int on_off,
+			  struct snd_midi_channel *chan)
+{
+	unsigned char drum_mask;
+	const struct snd_opl3_drum_voice *drum_voice;
+
+	if (!(opl3->drum_reg & OPL3_PERCUSSION_ENABLE))
+		return;
+
+	if ((note < 35) || (note > 81))
+		return;
+	drum_mask = snd_opl3_drum_table[note - 35];
+
+	if (on_off) {
+		switch (drum_mask) {
+		case OPL3_BASSDRUM_ON:
+			drum_voice = &bass_op1;
+			break;
+		case OPL3_HIHAT_ON:
+			drum_voice = &hihat;
+			break;
+		case OPL3_SNAREDRUM_ON:
+			drum_voice = &snare;
+			break;
+		case OPL3_TOMTOM_ON:
+			drum_voice = &tomtom;
+			break;
+		case OPL3_CYMBAL_ON:
+			drum_voice = &cymbal;
+			break;
+		default:
+			drum_voice = &tomtom;
+		}
+
+		snd_opl3_drum_vol_set(opl3, drum_voice, vel, chan);
+		opl3->drum_reg |= drum_mask;
+	} else {
+		opl3->drum_reg &= ~drum_mask;
+	}
+	opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION,
+			 opl3->drum_reg);
+}