Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 378 insertions, 0 deletions

diff --git a/sound/firewire/dice/dice-interface.h b/sound/firewire/dice/dice-interface.h
new file mode 100644
index 000000000..9cad3d608
--- /dev/null
+++ b/sound/firewire/dice/dice-interface.h
@@ -0,0 +1,378 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef SOUND_FIREWIRE_DICE_INTERFACE_H_INCLUDED
+#define SOUND_FIREWIRE_DICE_INTERFACE_H_INCLUDED
+
+/*
+ * DICE device interface definitions
+ */
+
+/*
+ * Generally, all registers can be read like memory, i.e., with quadlet read or
+ * block read transactions with at least quadlet-aligned offset and length.
+ * Writes are not allowed except where noted; quadlet-sized registers must be
+ * written with a quadlet write transaction.
+ *
+ * All values are in big endian.  The DICE firmware runs on a little-endian CPU
+ * and just byte-swaps _all_ quadlets on the bus, so values without endianness
+ * (e.g. strings) get scrambled and must be byte-swapped again by the driver.
+ */
+
+/*
+ * Streaming is handled by the "DICE driver" interface.  Its registers are
+ * located in this private address space.
+ */
+#define DICE_PRIVATE_SPACE		0xffffe0000000uLL
+
+/*
+ * The registers are organized in several sections, which are organized
+ * separately to allow them to be extended individually.  Whether a register is
+ * supported can be detected by checking its offset against its section's size.
+ *
+ * The section offset values are relative to DICE_PRIVATE_SPACE; the offset/
+ * size values are measured in quadlets.  Read-only.
+ */
+#define DICE_GLOBAL_OFFSET		0x00
+#define DICE_GLOBAL_SIZE		0x04
+#define DICE_TX_OFFSET			0x08
+#define DICE_TX_SIZE			0x0c
+#define DICE_RX_OFFSET			0x10
+#define DICE_RX_SIZE			0x14
+#define DICE_EXT_SYNC_OFFSET		0x18
+#define DICE_EXT_SYNC_SIZE		0x1c
+#define DICE_UNUSED2_OFFSET		0x20
+#define DICE_UNUSED2_SIZE		0x24
+
+/*
+ * Global settings.
+ */
+
+/*
+ * Stores the full 64-bit address (node ID and offset in the node's address
+ * space) where the device will send notifications.  Must be changed with
+ * a compare/swap transaction by the owner.  This register is automatically
+ * cleared on a bus reset.
+ */
+#define GLOBAL_OWNER			0x000
+#define  OWNER_NO_OWNER			0xffff000000000000uLL
+#define  OWNER_NODE_SHIFT		48
+
+/*
+ * A bitmask with asynchronous events; read-only.  When any event(s) happen,
+ * the bits of previous events are cleared, and the value of this register is
+ * also written to the address stored in the owner register.
+ */
+#define GLOBAL_NOTIFICATION		0x008
+/* Some registers in the Rx/Tx sections may have changed. */
+#define  NOTIFY_RX_CFG_CHG		0x00000001
+#define  NOTIFY_TX_CFG_CHG		0x00000002
+/* Lock status of the current clock source may have changed. */
+#define  NOTIFY_LOCK_CHG		0x00000010
+/* Write to the clock select register has been finished. */
+#define  NOTIFY_CLOCK_ACCEPTED		0x00000020
+/* Lock status of some clock source has changed. */
+#define  NOTIFY_EXT_STATUS		0x00000040
+/* Other bits may be used for device-specific events. */
+
+/*
+ * A name that can be customized for each device; read/write.  Padded with zero
+ * bytes.  Quadlets are byte-swapped.  The encoding is whatever the host driver
+ * happens to be using.
+ */
+#define GLOBAL_NICK_NAME		0x00c
+#define  NICK_NAME_SIZE			64
+
+/*
+ * The current sample rate and clock source; read/write.  Whether a clock
+ * source or sample rate is supported is device-specific; the internal clock
+ * source is always available.  Low/mid/high = up to 48/96/192 kHz.  This
+ * register can be changed even while streams are running.
+ */
+#define GLOBAL_CLOCK_SELECT		0x04c
+#define  CLOCK_SOURCE_MASK		0x000000ff
+#define  CLOCK_SOURCE_AES1		0x00000000
+#define  CLOCK_SOURCE_AES2		0x00000001
+#define  CLOCK_SOURCE_AES3		0x00000002
+#define  CLOCK_SOURCE_AES4		0x00000003
+#define  CLOCK_SOURCE_AES_ANY		0x00000004
+#define  CLOCK_SOURCE_ADAT		0x00000005
+#define  CLOCK_SOURCE_TDIF		0x00000006
+#define  CLOCK_SOURCE_WC		0x00000007
+#define  CLOCK_SOURCE_ARX1		0x00000008
+#define  CLOCK_SOURCE_ARX2		0x00000009
+#define  CLOCK_SOURCE_ARX3		0x0000000a
+#define  CLOCK_SOURCE_ARX4		0x0000000b
+#define  CLOCK_SOURCE_INTERNAL		0x0000000c
+#define  CLOCK_RATE_MASK		0x0000ff00
+#define  CLOCK_RATE_32000		0x00000000
+#define  CLOCK_RATE_44100		0x00000100
+#define  CLOCK_RATE_48000		0x00000200
+#define  CLOCK_RATE_88200		0x00000300
+#define  CLOCK_RATE_96000		0x00000400
+#define  CLOCK_RATE_176400		0x00000500
+#define  CLOCK_RATE_192000		0x00000600
+#define  CLOCK_RATE_ANY_LOW		0x00000700
+#define  CLOCK_RATE_ANY_MID		0x00000800
+#define  CLOCK_RATE_ANY_HIGH		0x00000900
+#define  CLOCK_RATE_NONE		0x00000a00
+#define  CLOCK_RATE_SHIFT		8
+
+/*
+ * Enable streaming; read/write.  Writing a non-zero value (re)starts all
+ * streams that have a valid iso channel set; zero stops all streams.  The
+ * streams' parameters must be configured before starting.  This register is
+ * automatically cleared on a bus reset.
+ */
+#define GLOBAL_ENABLE			0x050
+
+/*
+ * Status of the sample clock; read-only.
+ */
+#define GLOBAL_STATUS			0x054
+/* The current clock source is locked. */
+#define  STATUS_SOURCE_LOCKED		0x00000001
+/* The actual sample rate; CLOCK_RATE_32000-_192000 or _NONE. */
+#define  STATUS_NOMINAL_RATE_MASK	0x0000ff00
+
+/*
+ * Status of all clock sources; read-only.
+ */
+#define GLOBAL_EXTENDED_STATUS		0x058
+/*
+ * The _LOCKED bits always show the current status; any change generates
+ * a notification.
+ */
+#define  EXT_STATUS_AES1_LOCKED		0x00000001
+#define  EXT_STATUS_AES2_LOCKED		0x00000002
+#define  EXT_STATUS_AES3_LOCKED		0x00000004
+#define  EXT_STATUS_AES4_LOCKED		0x00000008
+#define  EXT_STATUS_ADAT_LOCKED		0x00000010
+#define  EXT_STATUS_TDIF_LOCKED		0x00000020
+#define  EXT_STATUS_ARX1_LOCKED		0x00000040
+#define  EXT_STATUS_ARX2_LOCKED		0x00000080
+#define  EXT_STATUS_ARX3_LOCKED		0x00000100
+#define  EXT_STATUS_ARX4_LOCKED		0x00000200
+#define  EXT_STATUS_WC_LOCKED		0x00000400
+/*
+ * The _SLIP bits do not generate notifications; a set bit indicates that an
+ * error occurred since the last time when this register was read with
+ * a quadlet read transaction.
+ */
+#define  EXT_STATUS_AES1_SLIP		0x00010000
+#define  EXT_STATUS_AES2_SLIP		0x00020000
+#define  EXT_STATUS_AES3_SLIP		0x00040000
+#define  EXT_STATUS_AES4_SLIP		0x00080000
+#define  EXT_STATUS_ADAT_SLIP		0x00100000
+#define  EXT_STATUS_TDIF_SLIP		0x00200000
+#define  EXT_STATUS_ARX1_SLIP		0x00400000
+#define  EXT_STATUS_ARX2_SLIP		0x00800000
+#define  EXT_STATUS_ARX3_SLIP		0x01000000
+#define  EXT_STATUS_ARX4_SLIP		0x02000000
+#define  EXT_STATUS_WC_SLIP		0x04000000
+
+/*
+ * The measured rate of the current clock source, in Hz; read-only.
+ */
+#define GLOBAL_SAMPLE_RATE		0x05c
+
+/*
+ * Some old firmware versions do not have the following global registers.
+ * Windows drivers produced by TCAT lost backward compatibility in its
+ * early release because they can handle firmware only which supports the
+ * following registers.
+ */
+
+/*
+ * The version of the DICE driver specification that this device conforms to;
+ * read-only.
+ */
+#define GLOBAL_VERSION			0x060
+
+/*
+ * Supported sample rates and clock sources; read-only.
+ */
+#define GLOBAL_CLOCK_CAPABILITIES	0x064
+#define  CLOCK_CAP_RATE_32000		0x00000001
+#define  CLOCK_CAP_RATE_44100		0x00000002
+#define  CLOCK_CAP_RATE_48000		0x00000004
+#define  CLOCK_CAP_RATE_88200		0x00000008
+#define  CLOCK_CAP_RATE_96000		0x00000010
+#define  CLOCK_CAP_RATE_176400		0x00000020
+#define  CLOCK_CAP_RATE_192000		0x00000040
+#define  CLOCK_CAP_SOURCE_AES1		0x00010000
+#define  CLOCK_CAP_SOURCE_AES2		0x00020000
+#define  CLOCK_CAP_SOURCE_AES3		0x00040000
+#define  CLOCK_CAP_SOURCE_AES4		0x00080000
+#define  CLOCK_CAP_SOURCE_AES_ANY	0x00100000
+#define  CLOCK_CAP_SOURCE_ADAT		0x00200000
+#define  CLOCK_CAP_SOURCE_TDIF		0x00400000
+#define  CLOCK_CAP_SOURCE_WC		0x00800000
+#define  CLOCK_CAP_SOURCE_ARX1		0x01000000
+#define  CLOCK_CAP_SOURCE_ARX2		0x02000000
+#define  CLOCK_CAP_SOURCE_ARX3		0x04000000
+#define  CLOCK_CAP_SOURCE_ARX4		0x08000000
+#define  CLOCK_CAP_SOURCE_INTERNAL	0x10000000
+
+/*
+ * Names of all clock sources; read-only.  Quadlets are byte-swapped.  Names
+ * are separated with one backslash, the list is terminated with two
+ * backslashes.  Unused clock sources are included.
+ */
+#define GLOBAL_CLOCK_SOURCE_NAMES	0x068
+#define  CLOCK_SOURCE_NAMES_SIZE	256
+
+/*
+ * Capture stream settings.  This section includes the number/size registers
+ * and the registers of all streams.
+ */
+
+/*
+ * The number of supported capture streams; read-only.
+ */
+#define TX_NUMBER			0x000
+
+/*
+ * The size of one stream's register block, in quadlets; read-only.  The
+ * registers of the first stream follow immediately afterwards; the registers
+ * of the following streams are offset by this register's value.
+ */
+#define TX_SIZE				0x004
+
+/*
+ * The isochronous channel number on which packets are sent, or -1 if the
+ * stream is not to be used; read/write.
+ */
+#define TX_ISOCHRONOUS			0x008
+
+/*
+ * The number of audio channels; read-only.  There will be one quadlet per
+ * channel; the first channel is the first quadlet in a data block.
+ */
+#define TX_NUMBER_AUDIO			0x00c
+
+/*
+ * The number of MIDI ports, 0-8; read-only.  If > 0, there will be one
+ * additional quadlet in each data block, following the audio quadlets.
+ */
+#define TX_NUMBER_MIDI			0x010
+
+/*
+ * The speed at which the packets are sent, SCODE_100-_400; read/write.
+ * SCODE_800 is only available in Dice III.
+ */
+#define TX_SPEED			0x014
+
+/*
+ * Names of all audio channels; read-only.  Quadlets are byte-swapped.  Names
+ * are separated with one backslash, the list is terminated with two
+ * backslashes.
+ */
+#define TX_NAMES			0x018
+#define  TX_NAMES_SIZE			256
+
+/*
+ * Audio IEC60958 capabilities; read-only.  Bitmask with one bit per audio
+ * channel.
+ */
+#define TX_AC3_CAPABILITIES		0x118
+
+/*
+ * Send audio data with IEC60958 label; read/write.  Bitmask with one bit per
+ * audio channel.  This register can be changed even while the stream is
+ * running.
+ */
+#define TX_AC3_ENABLE			0x11c
+
+/*
+ * Playback stream settings.  This section includes the number/size registers
+ * and the registers of all streams.
+ */
+
+/*
+ * The number of supported playback streams; read-only.
+ */
+#define RX_NUMBER			0x000
+
+/*
+ * The size of one stream's register block, in quadlets; read-only.  The
+ * registers of the first stream follow immediately afterwards; the registers
+ * of the following streams are offset by this register's value.
+ */
+#define RX_SIZE				0x004
+
+/*
+ * The isochronous channel number on which packets are received, or -1 if the
+ * stream is not to be used; read/write.
+ */
+#define RX_ISOCHRONOUS			0x008
+
+/*
+ * Index of first quadlet to be interpreted; read/write.  If > 0, that many
+ * quadlets at the beginning of each data block will be ignored, and all the
+ * audio and MIDI quadlets will follow.
+ */
+#define RX_SEQ_START			0x00c
+
+/*
+ * The number of audio channels; read-only.  There will be one quadlet per
+ * channel.
+ */
+#define RX_NUMBER_AUDIO			0x010
+
+/*
+ * The number of MIDI ports, 0-8; read-only.  If > 0, there will be one
+ * additional quadlet in each data block, following the audio quadlets.
+ */
+#define RX_NUMBER_MIDI			0x014
+
+/*
+ * Names of all audio channels; read-only.  Quadlets are byte-swapped.  Names
+ * are separated with one backslash, the list is terminated with two
+ * backslashes.
+ */
+#define RX_NAMES			0x018
+#define  RX_NAMES_SIZE			256
+
+/*
+ * Audio IEC60958 capabilities; read-only.  Bitmask with one bit per audio
+ * channel.
+ */
+#define RX_AC3_CAPABILITIES		0x118
+
+/*
+ * Receive audio data with IEC60958 label; read/write.  Bitmask with one bit
+ * per audio channel.  This register can be changed even while the stream is
+ * running.
+ */
+#define RX_AC3_ENABLE			0x11c
+
+/*
+ * Extended synchronization information.
+ * This section can be read completely with a block read request.
+ */
+
+/*
+ * Current clock source; read-only.
+ */
+#define EXT_SYNC_CLOCK_SOURCE		0x000
+
+/*
+ * Clock source is locked (boolean); read-only.
+ */
+#define EXT_SYNC_LOCKED			0x004
+
+/*
+ * Current sample rate (CLOCK_RATE_* >> CLOCK_RATE_SHIFT), _32000-_192000 or
+ * _NONE; read-only.
+ */
+#define EXT_SYNC_RATE			0x008
+
+/*
+ * ADAT user data bits; read-only.
+ */
+#define EXT_SYNC_ADAT_USER_DATA		0x00c
+/* The data bits, if available. */
+#define  ADAT_USER_DATA_MASK		0x0f
+/* The data bits are not available. */
+#define  ADAT_USER_DATA_NO_DATA		0x10
+
+#endif