Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 426 insertions, 0 deletions

diff --git a/sound/firewire/dice/dice.c b/sound/firewire/dice/dice.c
new file mode 100644
index 000000000..6036a5edb
--- /dev/null
+++ b/sound/firewire/dice/dice.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TC Applied Technologies Digital Interface Communications Engine driver
+ *
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ */
+
+#include "dice.h"
+
+MODULE_DESCRIPTION("DICE driver");
+MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
+MODULE_LICENSE("GPL v2");
+
+#define OUI_WEISS		0x001c6a
+#define OUI_LOUD		0x000ff2
+#define OUI_FOCUSRITE		0x00130e
+#define OUI_TCELECTRONIC	0x000166
+#define OUI_ALESIS		0x000595
+#define OUI_MAUDIO		0x000d6c
+#define OUI_MYTEK		0x001ee8
+#define OUI_SSL			0x0050c2	// Actually ID reserved by IEEE.
+#define OUI_PRESONUS		0x000a92
+#define OUI_HARMAN		0x000fd7
+#define OUI_AVID		0x00a07e
+
+#define DICE_CATEGORY_ID	0x04
+#define WEISS_CATEGORY_ID	0x00
+#define LOUD_CATEGORY_ID	0x10
+#define HARMAN_CATEGORY_ID	0x20
+
+#define MODEL_ALESIS_IO_BOTH	0x000001
+
+static int check_dice_category(struct fw_unit *unit)
+{
+	struct fw_device *device = fw_parent_device(unit);
+	struct fw_csr_iterator it;
+	int key, val, vendor = -1, model = -1;
+	unsigned int category;
+
+	/*
+	 * Check that GUID and unit directory are constructed according to DICE
+	 * rules, i.e., that the specifier ID is the GUID's OUI, and that the
+	 * GUID chip ID consists of the 8-bit category ID, the 10-bit product
+	 * ID, and a 22-bit serial number.
+	 */
+	fw_csr_iterator_init(&it, unit->directory);
+	while (fw_csr_iterator_next(&it, &key, &val)) {
+		switch (key) {
+		case CSR_SPECIFIER_ID:
+			vendor = val;
+			break;
+		case CSR_MODEL:
+			model = val;
+			break;
+		}
+	}
+
+	if (vendor == OUI_WEISS)
+		category = WEISS_CATEGORY_ID;
+	else if (vendor == OUI_LOUD)
+		category = LOUD_CATEGORY_ID;
+	else if (vendor == OUI_HARMAN)
+		category = HARMAN_CATEGORY_ID;
+	else
+		category = DICE_CATEGORY_ID;
+	if (device->config_rom[3] != ((vendor << 8) | category) ||
+	    device->config_rom[4] >> 22 != model)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int check_clock_caps(struct snd_dice *dice)
+{
+	__be32 value;
+	int err;
+
+	/* some very old firmwares don't tell about their clock support */
+	if (dice->clock_caps > 0) {
+		err = snd_dice_transaction_read_global(dice,
+						GLOBAL_CLOCK_CAPABILITIES,
+						&value, 4);
+		if (err < 0)
+			return err;
+		dice->clock_caps = be32_to_cpu(value);
+	} else {
+		/* this should be supported by any device */
+		dice->clock_caps = CLOCK_CAP_RATE_44100 |
+				   CLOCK_CAP_RATE_48000 |
+				   CLOCK_CAP_SOURCE_ARX1 |
+				   CLOCK_CAP_SOURCE_INTERNAL;
+	}
+
+	return 0;
+}
+
+static void dice_card_strings(struct snd_dice *dice)
+{
+	struct snd_card *card = dice->card;
+	struct fw_device *dev = fw_parent_device(dice->unit);
+	char vendor[32], model[32];
+	unsigned int i;
+	int err;
+
+	strcpy(card->driver, "DICE");
+
+	strcpy(card->shortname, "DICE");
+	BUILD_BUG_ON(NICK_NAME_SIZE < sizeof(card->shortname));
+	err = snd_dice_transaction_read_global(dice, GLOBAL_NICK_NAME,
+					       card->shortname,
+					       sizeof(card->shortname));
+	if (err >= 0) {
+		/* DICE strings are returned in "always-wrong" endianness */
+		BUILD_BUG_ON(sizeof(card->shortname) % 4 != 0);
+		for (i = 0; i < sizeof(card->shortname); i += 4)
+			swab32s((u32 *)&card->shortname[i]);
+		card->shortname[sizeof(card->shortname) - 1] = '\0';
+	}
+
+	strcpy(vendor, "?");
+	fw_csr_string(dev->config_rom + 5, CSR_VENDOR, vendor, sizeof(vendor));
+	strcpy(model, "?");
+	fw_csr_string(dice->unit->directory, CSR_MODEL, model, sizeof(model));
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s %s (serial %u) at %s, S%d",
+		 vendor, model, dev->config_rom[4] & 0x3fffff,
+		 dev_name(&dice->unit->device), 100 << dev->max_speed);
+
+	strcpy(card->mixername, "DICE");
+}
+
+static void dice_card_free(struct snd_card *card)
+{
+	struct snd_dice *dice = card->private_data;
+
+	snd_dice_stream_destroy_duplex(dice);
+	snd_dice_transaction_destroy(dice);
+
+	mutex_destroy(&dice->mutex);
+	fw_unit_put(dice->unit);
+}
+
+static int dice_probe(struct fw_unit *unit, const struct ieee1394_device_id *entry)
+{
+	struct snd_card *card;
+	struct snd_dice *dice;
+	snd_dice_detect_formats_t detect_formats;
+	int err;
+
+	if (!entry->driver_data && entry->vendor_id != OUI_SSL) {
+		err = check_dice_category(unit);
+		if (err < 0)
+			return -ENODEV;
+	}
+
+	err = snd_card_new(&unit->device, -1, NULL, THIS_MODULE, sizeof(*dice), &card);
+	if (err < 0)
+		return err;
+	card->private_free = dice_card_free;
+
+	dice = card->private_data;
+	dice->unit = fw_unit_get(unit);
+	dev_set_drvdata(&unit->device, dice);
+	dice->card = card;
+
+	if (!entry->driver_data)
+		detect_formats = snd_dice_stream_detect_current_formats;
+	else
+		detect_formats = (snd_dice_detect_formats_t)entry->driver_data;
+
+	// Below models are compliant to IEC 61883-1/6 and have no quirk at high sampling transfer
+	// frequency.
+	// * Avid M-Box 3 Pro
+	// * M-Audio Profire 610
+	// * M-Audio Profire 2626
+	if (entry->vendor_id == OUI_MAUDIO || entry->vendor_id == OUI_AVID)
+		dice->disable_double_pcm_frames = true;
+
+	spin_lock_init(&dice->lock);
+	mutex_init(&dice->mutex);
+	init_completion(&dice->clock_accepted);
+	init_waitqueue_head(&dice->hwdep_wait);
+
+	err = snd_dice_transaction_init(dice);
+	if (err < 0)
+		goto error;
+
+	err = check_clock_caps(dice);
+	if (err < 0)
+		goto error;
+
+	dice_card_strings(dice);
+
+	err = detect_formats(dice);
+	if (err < 0)
+		goto error;
+
+	err = snd_dice_stream_init_duplex(dice);
+	if (err < 0)
+		goto error;
+
+	snd_dice_create_proc(dice);
+
+	err = snd_dice_create_pcm(dice);
+	if (err < 0)
+		goto error;
+
+	err = snd_dice_create_midi(dice);
+	if (err < 0)
+		goto error;
+
+	err = snd_dice_create_hwdep(dice);
+	if (err < 0)
+		goto error;
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
+
+	return 0;
+error:
+	snd_card_free(card);
+	return err;
+}
+
+static void dice_remove(struct fw_unit *unit)
+{
+	struct snd_dice *dice = dev_get_drvdata(&unit->device);
+
+	// Block till all of ALSA character devices are released.
+	snd_card_free(dice->card);
+}
+
+static void dice_bus_reset(struct fw_unit *unit)
+{
+	struct snd_dice *dice = dev_get_drvdata(&unit->device);
+
+	/* The handler address register becomes initialized. */
+	snd_dice_transaction_reinit(dice);
+
+	mutex_lock(&dice->mutex);
+	snd_dice_stream_update_duplex(dice);
+	mutex_unlock(&dice->mutex);
+}
+
+#define DICE_INTERFACE	0x000001
+
+#define DICE_DEV_ENTRY_TYPICAL(vendor, model, data) \
+	{ \
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID | \
+				  IEEE1394_MATCH_MODEL_ID | \
+				  IEEE1394_MATCH_SPECIFIER_ID | \
+				  IEEE1394_MATCH_VERSION, \
+		.vendor_id	= (vendor), \
+		.model_id	= (model), \
+		.specifier_id	= (vendor), \
+		.version	= DICE_INTERFACE, \
+		.driver_data = (kernel_ulong_t)(data), \
+	}
+
+static const struct ieee1394_device_id dice_id_table[] = {
+	// Avid M-Box 3 Pro. To match in probe function.
+	DICE_DEV_ENTRY_TYPICAL(OUI_AVID, 0x000004, snd_dice_detect_extension_formats),
+	/* M-Audio Profire 2626 has a different value in version field. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_MAUDIO,
+		.model_id	= 0x000010,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_extension_formats,
+	},
+	/* M-Audio Profire 610 has a different value in version field. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_MAUDIO,
+		.model_id	= 0x000011,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_extension_formats,
+	},
+	/* TC Electronic Konnekt 24D. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000020,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Konnekt 8. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000021,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Studio Konnekt 48. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000022,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Konnekt Live. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000023,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Desktop Konnekt 6. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000024,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Impact Twin. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000027,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* TC Electronic Digital Konnekt x32. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_TCELECTRONIC,
+		.model_id	= 0x000030,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
+	},
+	/* Alesis iO14/iO26. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_ALESIS,
+		.model_id	= MODEL_ALESIS_IO_BOTH,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_alesis_formats,
+	},
+	// Alesis MasterControl.
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_ALESIS,
+		.model_id	= 0x000002,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_alesis_mastercontrol_formats,
+	},
+	/* Mytek Stereo 192 DSD-DAC. */
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_MYTEK,
+		.model_id	= 0x000002,
+		.driver_data = (kernel_ulong_t)snd_dice_detect_mytek_formats,
+	},
+	// Solid State Logic, Duende Classic and Mini.
+	// NOTE: each field of GUID in config ROM is not compliant to standard
+	// DICE scheme.
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_SSL,
+		.model_id	= 0x000070,
+	},
+	// Presonus FireStudio.
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_PRESONUS,
+		.model_id	= 0x000008,
+		.driver_data	= (kernel_ulong_t)snd_dice_detect_presonus_formats,
+	},
+	// Lexicon I-ONYX FW810S.
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_HARMAN,
+		.model_id	= 0x000001,
+		.driver_data	= (kernel_ulong_t)snd_dice_detect_harman_formats,
+	},
+	// Focusrite Saffire Pro 40 with TCD3070-CH.
+	// The model has quirk in its GUID, in which model field is 0x000013 and different from
+	// model ID (0x0000de) in its root/unit directory.
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_FOCUSRITE,
+		.model_id	= 0x0000de,
+		.driver_data	= (kernel_ulong_t)snd_dice_detect_focusrite_pro40_tcd3070_formats,
+	},
+	{
+		.match_flags = IEEE1394_MATCH_VERSION,
+		.version     = DICE_INTERFACE,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(ieee1394, dice_id_table);
+
+static struct fw_driver dice_driver = {
+	.driver   = {
+		.owner	= THIS_MODULE,
+		.name	= KBUILD_MODNAME,
+		.bus	= &fw_bus_type,
+	},
+	.probe    = dice_probe,
+	.update   = dice_bus_reset,
+	.remove   = dice_remove,
+	.id_table = dice_id_table,
+};
+
+static int __init alsa_dice_init(void)
+{
+	return driver_register(&dice_driver.driver);
+}
+
+static void __exit alsa_dice_exit(void)
+{
+	driver_unregister(&dice_driver.driver);
+}
+
+module_init(alsa_dice_init);
+module_exit(alsa_dice_exit);