Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 272 insertions, 0 deletions

diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c
new file mode 100644
index 000000000..3c21324b2
--- /dev/null
+++ b/sound/isa/wavefront/wavefront_fx.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 1998-2002 by Paul Davis <pbd@op.net>
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/snd_wavefront.h>
+#include <sound/initval.h>
+
+/* Control bits for the Load Control Register
+ */
+
+#define FX_LSB_TRANSFER 0x01    /* transfer after DSP LSB byte written */
+#define FX_MSB_TRANSFER 0x02    /* transfer after DSP MSB byte written */
+#define FX_AUTO_INCR    0x04    /* auto-increment DSP address after transfer */
+
+#define WAIT_IDLE	0xff
+
+static int
+wavefront_fx_idle (snd_wavefront_t *dev)
+
+{
+	int i;
+	unsigned int x = 0x80;
+
+	for (i = 0; i < 1000; i++) {
+		x = inb (dev->fx_status);
+		if ((x & 0x80) == 0) {
+			break;
+		}
+	}
+
+	if (x & 0x80) {
+		snd_printk ("FX device never idle.\n");
+		return 0;
+	}
+
+	return (1);
+}
+
+static void
+wavefront_fx_mute (snd_wavefront_t *dev, int onoff)
+
+{
+	if (!wavefront_fx_idle(dev)) {
+		return;
+	}
+
+	outb (onoff ? 0x02 : 0x00, dev->fx_op);
+}
+
+static int
+wavefront_fx_memset (snd_wavefront_t *dev,
+		     int page,
+		     int addr,
+		     int cnt,
+		     unsigned short *data)
+{
+	if (page < 0 || page > 7) {
+		snd_printk ("FX memset: "
+			"page must be >= 0 and <= 7\n");
+		return -EINVAL;
+	}
+
+	if (addr < 0 || addr > 0x7f) {
+		snd_printk ("FX memset: "
+			"addr must be >= 0 and <= 7f\n");
+		return -EINVAL;
+	}
+
+	if (cnt == 1) {
+
+		outb (FX_LSB_TRANSFER, dev->fx_lcr);
+		outb (page, dev->fx_dsp_page);
+		outb (addr, dev->fx_dsp_addr);
+		outb ((data[0] >> 8), dev->fx_dsp_msb);
+		outb ((data[0] & 0xff), dev->fx_dsp_lsb);
+
+		snd_printk ("FX: addr %d:%x set to 0x%x\n",
+			page, addr, data[0]);
+
+	} else {
+		int i;
+
+		outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev->fx_lcr);
+		outb (page, dev->fx_dsp_page);
+		outb (addr, dev->fx_dsp_addr);
+
+		for (i = 0; i < cnt; i++) {
+			outb ((data[i] >> 8), dev->fx_dsp_msb);
+			outb ((data[i] & 0xff), dev->fx_dsp_lsb);
+			if (!wavefront_fx_idle (dev)) {
+				break;
+			}
+		}
+
+		if (i != cnt) {
+			snd_printk ("FX memset "
+				    "(0x%x, 0x%x, 0x%lx, %d) incomplete\n",
+				    page, addr, (unsigned long) data, cnt);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+int
+snd_wavefront_fx_detect (snd_wavefront_t *dev)
+
+{
+	/* This is a crude check, but its the best one I have for now.
+	   Certainly on the Maui and the Tropez, wavefront_fx_idle() will
+	   report "never idle", which suggests that this test should
+	   work OK.
+	*/
+
+	if (inb (dev->fx_status) & 0x80) {
+		snd_printk ("Hmm, probably a Maui or Tropez.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+int
+snd_wavefront_fx_open (struct snd_hwdep *hw, struct file *file)
+
+{
+	if (!try_module_get(hw->card->module))
+		return -EFAULT;
+	file->private_data = hw;
+	return 0;
+}
+
+int 
+snd_wavefront_fx_release (struct snd_hwdep *hw, struct file *file)
+
+{
+	module_put(hw->card->module);
+	return 0;
+}
+
+int
+snd_wavefront_fx_ioctl (struct snd_hwdep *sdev, struct file *file,
+			unsigned int cmd, unsigned long arg)
+
+{
+	struct snd_card *card;
+	snd_wavefront_card_t *acard;
+	snd_wavefront_t *dev;
+	wavefront_fx_info r;
+	unsigned short *page_data = NULL;
+	unsigned short *pd;
+	int err = 0;
+
+	card = sdev->card;
+	if (snd_BUG_ON(!card))
+		return -ENODEV;
+	if (snd_BUG_ON(!card->private_data))
+		return -ENODEV;
+
+	acard = card->private_data;
+	dev = &acard->wavefront;
+
+	if (copy_from_user (&r, (void __user *)arg, sizeof (wavefront_fx_info)))
+		return -EFAULT;
+
+	switch (r.request) {
+	case WFFX_MUTE:
+		wavefront_fx_mute (dev, r.data[0]);
+		return -EIO;
+
+	case WFFX_MEMSET:
+		if (r.data[2] <= 0) {
+			snd_printk ("cannot write "
+				"<= 0 bytes to FX\n");
+			return -EIO;
+		} else if (r.data[2] == 1) {
+			pd = (unsigned short *) &r.data[3];
+		} else {
+			if (r.data[2] > 256) {
+				snd_printk ("cannot write "
+					    "> 512 bytes to FX\n");
+				return -EIO;
+			}
+			page_data = memdup_user((unsigned char __user *)
+						r.data[3],
+						r.data[2] * sizeof(short));
+			if (IS_ERR(page_data))
+				return PTR_ERR(page_data);
+			pd = page_data;
+		}
+
+		err = wavefront_fx_memset (dev,
+			     r.data[0], /* page */
+			     r.data[1], /* addr */
+			     r.data[2], /* cnt */
+			     pd);
+		kfree(page_data);
+		break;
+
+	default:
+		snd_printk ("FX: ioctl %d not yet supported\n",
+			    r.request);
+		return -ENOTTY;
+	}
+	return err;
+}
+
+/* YSS225 initialization.
+
+   This code was developed using DOSEMU. The Turtle Beach SETUPSND
+   utility was run with I/O tracing in DOSEMU enabled, and a reconstruction
+   of the port I/O done, using the Yamaha faxback document as a guide
+   to add more logic to the code. Its really pretty weird.
+
+   This is the approach of just dumping the whole I/O
+   sequence as a series of port/value pairs and a simple loop
+   that outputs it.
+*/
+
+int
+snd_wavefront_fx_start (snd_wavefront_t *dev)
+{
+	unsigned int i;
+	int err;
+	const struct firmware *firmware = NULL;
+
+	if (dev->fx_initialized)
+		return 0;
+
+	err = request_firmware(&firmware, "yamaha/yss225_registers.bin",
+			       dev->card->dev);
+	if (err < 0) {
+		err = -1;
+		goto out;
+	}
+
+	for (i = 0; i + 1 < firmware->size; i += 2) {
+		if (firmware->data[i] >= 8 && firmware->data[i] < 16) {
+			outb(firmware->data[i + 1],
+			     dev->base + firmware->data[i]);
+		} else if (firmware->data[i] == WAIT_IDLE) {
+			if (!wavefront_fx_idle(dev)) {
+				err = -1;
+				goto out;
+			}
+		} else {
+			snd_printk(KERN_ERR "invalid address"
+				   " in register data\n");
+			err = -1;
+			goto out;
+		}
+	}
+
+	dev->fx_initialized = 1;
+	err = 0;
+
+out:
+	release_firmware(firmware);
+	return err;
+}
+
+MODULE_FIRMWARE("yamaha/yss225_registers.bin");