Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 896 insertions, 0 deletions

diff --git a/sound/mips/hal2.c b/sound/mips/hal2.c
new file mode 100644
index 000000000..9ac9b58d7
--- /dev/null
+++ b/sound/mips/hal2.c
@@ -0,0 +1,896 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Driver for A2 audio system used in SGI machines
+ *  Copyright (c) 2008 Thomas Bogendoerfer <tsbogend@alpha.fanken.de>
+ *
+ *  Based on OSS code from Ladislav Michl <ladis@linux-mips.org>, which
+ *  was based on code from Ulf Carlsson
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <asm/sgi/hpc3.h>
+#include <asm/sgi/ip22.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm-indirect.h>
+#include <sound/initval.h>
+
+#include "hal2.h"
+
+static int index = SNDRV_DEFAULT_IDX1;  /* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1;   /* ID for this card */
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SGI HAL2 soundcard.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SGI HAL2 soundcard.");
+MODULE_DESCRIPTION("ALSA driver for SGI HAL2 audio");
+MODULE_AUTHOR("Thomas Bogendoerfer");
+MODULE_LICENSE("GPL");
+
+
+#define H2_BLOCK_SIZE	1024
+#define H2_BUF_SIZE	16384
+
+struct hal2_pbus {
+	struct hpc3_pbus_dmacregs *pbus;
+	int pbusnr;
+	unsigned int ctrl;		/* Current state of pbus->pbdma_ctrl */
+};
+
+struct hal2_desc {
+	struct hpc_dma_desc desc;
+	u32 pad;			/* padding */
+};
+
+struct hal2_codec {
+	struct snd_pcm_indirect pcm_indirect;
+	struct snd_pcm_substream *substream;
+
+	unsigned char *buffer;
+	dma_addr_t buffer_dma;
+	struct hal2_desc *desc;
+	dma_addr_t desc_dma;
+	int desc_count;
+	struct hal2_pbus pbus;
+	int voices;			/* mono/stereo */
+	unsigned int sample_rate;
+	unsigned int master;		/* Master frequency */
+	unsigned short mod;		/* MOD value */
+	unsigned short inc;		/* INC value */
+};
+
+#define H2_MIX_OUTPUT_ATT	0
+#define H2_MIX_INPUT_GAIN	1
+
+struct snd_hal2 {
+	struct snd_card *card;
+
+	struct hal2_ctl_regs *ctl_regs;	/* HAL2 ctl registers */
+	struct hal2_aes_regs *aes_regs;	/* HAL2 aes registers */
+	struct hal2_vol_regs *vol_regs;	/* HAL2 vol registers */
+	struct hal2_syn_regs *syn_regs;	/* HAL2 syn registers */
+
+	struct hal2_codec dac;
+	struct hal2_codec adc;
+};
+
+#define H2_INDIRECT_WAIT(regs)	while (hal2_read(&regs->isr) & H2_ISR_TSTATUS);
+
+#define H2_READ_ADDR(addr)	(addr | (1<<7))
+#define H2_WRITE_ADDR(addr)	(addr)
+
+static inline u32 hal2_read(u32 *reg)
+{
+	return __raw_readl(reg);
+}
+
+static inline void hal2_write(u32 val, u32 *reg)
+{
+	__raw_writel(val, reg);
+}
+
+
+static u32 hal2_i_read32(struct snd_hal2 *hal2, u16 addr)
+{
+	u32 ret;
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(H2_READ_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+	ret = hal2_read(&regs->idr0) & 0xffff;
+	hal2_write(H2_READ_ADDR(addr) | 0x1, &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+	ret |= (hal2_read(&regs->idr0) & 0xffff) << 16;
+	return ret;
+}
+
+static void hal2_i_write16(struct snd_hal2 *hal2, u16 addr, u16 val)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(val, &regs->idr0);
+	hal2_write(0, &regs->idr1);
+	hal2_write(0, &regs->idr2);
+	hal2_write(0, &regs->idr3);
+	hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_write32(struct snd_hal2 *hal2, u16 addr, u32 val)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(val & 0xffff, &regs->idr0);
+	hal2_write(val >> 16, &regs->idr1);
+	hal2_write(0, &regs->idr2);
+	hal2_write(0, &regs->idr3);
+	hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_setbit16(struct snd_hal2 *hal2, u16 addr, u16 bit)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(H2_READ_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+	hal2_write((hal2_read(&regs->idr0) & 0xffff) | bit, &regs->idr0);
+	hal2_write(0, &regs->idr1);
+	hal2_write(0, &regs->idr2);
+	hal2_write(0, &regs->idr3);
+	hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_clearbit16(struct snd_hal2 *hal2, u16 addr, u16 bit)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(H2_READ_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+	hal2_write((hal2_read(&regs->idr0) & 0xffff) & ~bit, &regs->idr0);
+	hal2_write(0, &regs->idr1);
+	hal2_write(0, &regs->idr2);
+	hal2_write(0, &regs->idr3);
+	hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static int hal2_gain_info(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	switch ((int)kcontrol->private_value) {
+	case H2_MIX_OUTPUT_ATT:
+		uinfo->value.integer.max = 31;
+		break;
+	case H2_MIX_INPUT_GAIN:
+		uinfo->value.integer.max = 15;
+		break;
+	}
+	return 0;
+}
+
+static int hal2_gain_get(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol);
+	u32 tmp;
+	int l, r;
+
+	switch ((int)kcontrol->private_value) {
+	case H2_MIX_OUTPUT_ATT:
+		tmp = hal2_i_read32(hal2, H2I_DAC_C2);
+		if (tmp & H2I_C2_MUTE) {
+			l = 0;
+			r = 0;
+		} else {
+			l = 31 - ((tmp >> H2I_C2_L_ATT_SHIFT) & 31);
+			r = 31 - ((tmp >> H2I_C2_R_ATT_SHIFT) & 31);
+		}
+		break;
+	case H2_MIX_INPUT_GAIN:
+		tmp = hal2_i_read32(hal2, H2I_ADC_C2);
+		l = (tmp >> H2I_C2_L_GAIN_SHIFT) & 15;
+		r = (tmp >> H2I_C2_R_GAIN_SHIFT) & 15;
+		break;
+	default:
+		return -EINVAL;
+	}
+	ucontrol->value.integer.value[0] = l;
+	ucontrol->value.integer.value[1] = r;
+
+	return 0;
+}
+
+static int hal2_gain_put(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol);
+	u32 old, new;
+	int l, r;
+
+	l = ucontrol->value.integer.value[0];
+	r = ucontrol->value.integer.value[1];
+
+	switch ((int)kcontrol->private_value) {
+	case H2_MIX_OUTPUT_ATT:
+		old = hal2_i_read32(hal2, H2I_DAC_C2);
+		new = old & ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
+		if (l | r) {
+			l = 31 - l;
+			r = 31 - r;
+			new |= (l << H2I_C2_L_ATT_SHIFT);
+			new |= (r << H2I_C2_R_ATT_SHIFT);
+		} else
+			new |= H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE;
+		hal2_i_write32(hal2, H2I_DAC_C2, new);
+		break;
+	case H2_MIX_INPUT_GAIN:
+		old = hal2_i_read32(hal2, H2I_ADC_C2);
+		new = old & ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M);
+		new |= (l << H2I_C2_L_GAIN_SHIFT);
+		new |= (r << H2I_C2_R_GAIN_SHIFT);
+		hal2_i_write32(hal2, H2I_ADC_C2, new);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return old != new;
+}
+
+static const struct snd_kcontrol_new hal2_ctrl_headphone = {
+	.iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name           = "Headphone Playback Volume",
+	.access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.private_value  = H2_MIX_OUTPUT_ATT,
+	.info           = hal2_gain_info,
+	.get            = hal2_gain_get,
+	.put            = hal2_gain_put,
+};
+
+static const struct snd_kcontrol_new hal2_ctrl_mic = {
+	.iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name           = "Mic Capture Volume",
+	.access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.private_value  = H2_MIX_INPUT_GAIN,
+	.info           = hal2_gain_info,
+	.get            = hal2_gain_get,
+	.put            = hal2_gain_put,
+};
+
+static int hal2_mixer_create(struct snd_hal2 *hal2)
+{
+	int err;
+
+	/* mute DAC */
+	hal2_i_write32(hal2, H2I_DAC_C2,
+		       H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
+	/* mute ADC */
+	hal2_i_write32(hal2, H2I_ADC_C2, 0);
+
+	err = snd_ctl_add(hal2->card,
+			  snd_ctl_new1(&hal2_ctrl_headphone, hal2));
+	if (err < 0)
+		return err;
+
+	err = snd_ctl_add(hal2->card,
+			  snd_ctl_new1(&hal2_ctrl_mic, hal2));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static irqreturn_t hal2_interrupt(int irq, void *dev_id)
+{
+	struct snd_hal2 *hal2 = dev_id;
+	irqreturn_t ret = IRQ_NONE;
+
+	/* decide what caused this interrupt */
+	if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+		snd_pcm_period_elapsed(hal2->dac.substream);
+		ret = IRQ_HANDLED;
+	}
+	if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+		snd_pcm_period_elapsed(hal2->adc.substream);
+		ret = IRQ_HANDLED;
+	}
+	return ret;
+}
+
+static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate)
+{
+	unsigned short mod;
+
+	if (44100 % rate < 48000 % rate) {
+		mod = 4 * 44100 / rate;
+		codec->master = 44100;
+	} else {
+		mod = 4 * 48000 / rate;
+		codec->master = 48000;
+	}
+
+	codec->inc = 4;
+	codec->mod = mod;
+	rate = 4 * codec->master / mod;
+
+	return rate;
+}
+
+static void hal2_set_dac_rate(struct snd_hal2 *hal2)
+{
+	unsigned int master = hal2->dac.master;
+	int inc = hal2->dac.inc;
+	int mod = hal2->dac.mod;
+
+	hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0);
+	hal2_i_write32(hal2, H2I_BRES1_C2,
+		       ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_set_adc_rate(struct snd_hal2 *hal2)
+{
+	unsigned int master = hal2->adc.master;
+	int inc = hal2->adc.inc;
+	int mod = hal2->adc.mod;
+
+	hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0);
+	hal2_i_write32(hal2, H2I_BRES2_C2,
+		       ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_setup_dac(struct snd_hal2 *hal2)
+{
+	unsigned int fifobeg, fifoend, highwater, sample_size;
+	struct hal2_pbus *pbus = &hal2->dac.pbus;
+
+	/* Now we set up some PBUS information. The PBUS needs information about
+	 * what portion of the fifo it will use. If it's receiving or
+	 * transmitting, and finally whether the stream is little endian or big
+	 * endian. The information is written later, on the start call.
+	 */
+	sample_size = 2 * hal2->dac.voices;
+	/* Fifo should be set to hold exactly four samples. Highwater mark
+	 * should be set to two samples. */
+	highwater = (sample_size * 2) >> 1;	/* halfwords */
+	fifobeg = 0;				/* playback is first */
+	fifoend = (sample_size * 4) >> 3;	/* doublewords */
+	pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD |
+		     (highwater << 8) | (fifobeg << 16) | (fifoend << 24);
+	/* We disable everything before we do anything at all */
+	pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+	hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+	/* Setup the HAL2 for playback */
+	hal2_set_dac_rate(hal2);
+	/* Set endianess */
+	hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX);
+	/* Set DMA bus */
+	hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+	/* We are using 1st Bresenham clock generator for playback */
+	hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+			| (1 << H2I_C1_CLKID_SHIFT)
+			| (hal2->dac.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static void hal2_setup_adc(struct snd_hal2 *hal2)
+{
+	unsigned int fifobeg, fifoend, highwater, sample_size;
+	struct hal2_pbus *pbus = &hal2->adc.pbus;
+
+	sample_size = 2 * hal2->adc.voices;
+	highwater = (sample_size * 2) >> 1;		/* halfwords */
+	fifobeg = (4 * 4) >> 3;				/* record is second */
+	fifoend = (4 * 4 + sample_size * 4) >> 3;	/* doublewords */
+	pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD |
+		     (highwater << 8) | (fifobeg << 16) | (fifoend << 24);
+	pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+	hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+	/* Setup the HAL2 for record */
+	hal2_set_adc_rate(hal2);
+	/* Set endianess */
+	hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR);
+	/* Set DMA bus */
+	hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+	/* We are using 2nd Bresenham clock generator for record */
+	hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+			| (2 << H2I_C1_CLKID_SHIFT)
+			| (hal2->adc.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static void hal2_start_dac(struct snd_hal2 *hal2)
+{
+	struct hal2_pbus *pbus = &hal2->dac.pbus;
+
+	pbus->pbus->pbdma_dptr = hal2->dac.desc_dma;
+	pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+	/* enable DAC */
+	hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+}
+
+static void hal2_start_adc(struct snd_hal2 *hal2)
+{
+	struct hal2_pbus *pbus = &hal2->adc.pbus;
+
+	pbus->pbus->pbdma_dptr = hal2->adc.desc_dma;
+	pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+	/* enable ADC */
+	hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+}
+
+static inline void hal2_stop_dac(struct snd_hal2 *hal2)
+{
+	hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+	/* The HAL2 itself may remain enabled safely */
+}
+
+static inline void hal2_stop_adc(struct snd_hal2 *hal2)
+{
+	hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+}
+
+static int hal2_alloc_dmabuf(struct snd_hal2 *hal2, struct hal2_codec *codec,
+		enum dma_data_direction buffer_dir)
+{
+	struct device *dev = hal2->card->dev;
+	struct hal2_desc *desc;
+	dma_addr_t desc_dma, buffer_dma;
+	int count = H2_BUF_SIZE / H2_BLOCK_SIZE;
+	int i;
+
+	codec->buffer = dma_alloc_noncoherent(dev, H2_BUF_SIZE, &buffer_dma,
+					buffer_dir, GFP_KERNEL);
+	if (!codec->buffer)
+		return -ENOMEM;
+	desc = dma_alloc_noncoherent(dev, count * sizeof(struct hal2_desc),
+			&desc_dma, DMA_BIDIRECTIONAL, GFP_KERNEL);
+	if (!desc) {
+		dma_free_noncoherent(dev, H2_BUF_SIZE, codec->buffer, buffer_dma,
+				buffer_dir);
+		return -ENOMEM;
+	}
+	codec->buffer_dma = buffer_dma;
+	codec->desc_dma = desc_dma;
+	codec->desc = desc;
+	for (i = 0; i < count; i++) {
+		desc->desc.pbuf = buffer_dma + i * H2_BLOCK_SIZE;
+		desc->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE;
+		desc->desc.pnext = (i == count - 1) ?
+		      desc_dma : desc_dma + (i + 1) * sizeof(struct hal2_desc);
+		desc++;
+	}
+	dma_sync_single_for_device(dev, codec->desc_dma,
+				   count * sizeof(struct hal2_desc),
+				   DMA_BIDIRECTIONAL);
+	codec->desc_count = count;
+	return 0;
+}
+
+static void hal2_free_dmabuf(struct snd_hal2 *hal2, struct hal2_codec *codec,
+		enum dma_data_direction buffer_dir)
+{
+	struct device *dev = hal2->card->dev;
+
+	dma_free_noncoherent(dev, codec->desc_count * sizeof(struct hal2_desc),
+		       codec->desc, codec->desc_dma, DMA_BIDIRECTIONAL);
+	dma_free_noncoherent(dev, H2_BUF_SIZE, codec->buffer, codec->buffer_dma,
+			buffer_dir);
+}
+
+static const struct snd_pcm_hardware hal2_pcm_hw = {
+	.info = (SNDRV_PCM_INFO_MMAP |
+		 SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_INTERLEAVED |
+		 SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		 SNDRV_PCM_INFO_SYNC_APPLPTR),
+	.formats =          SNDRV_PCM_FMTBIT_S16_BE,
+	.rates =            SNDRV_PCM_RATE_8000_48000,
+	.rate_min =         8000,
+	.rate_max =         48000,
+	.channels_min =     2,
+	.channels_max =     2,
+	.buffer_bytes_max = 65536,
+	.period_bytes_min = 1024,
+	.period_bytes_max = 65536,
+	.periods_min =      2,
+	.periods_max =      1024,
+};
+
+static int hal2_playback_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	runtime->hw = hal2_pcm_hw;
+	return hal2_alloc_dmabuf(hal2, &hal2->dac, DMA_TO_DEVICE);
+}
+
+static int hal2_playback_close(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	hal2_free_dmabuf(hal2, &hal2->dac, DMA_TO_DEVICE);
+	return 0;
+}
+
+static int hal2_playback_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct hal2_codec *dac = &hal2->dac;
+
+	dac->voices = runtime->channels;
+	dac->sample_rate = hal2_compute_rate(dac, runtime->rate);
+	memset(&dac->pcm_indirect, 0, sizeof(dac->pcm_indirect));
+	dac->pcm_indirect.hw_buffer_size = H2_BUF_SIZE;
+	dac->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2;
+	dac->pcm_indirect.hw_io = dac->buffer_dma;
+	dac->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
+	dac->substream = substream;
+	hal2_setup_dac(hal2);
+	return 0;
+}
+
+static int hal2_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		hal2_start_dac(hal2);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		hal2_stop_dac(hal2);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static snd_pcm_uframes_t
+hal2_playback_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct hal2_codec *dac = &hal2->dac;
+
+	return snd_pcm_indirect_playback_pointer(substream, &dac->pcm_indirect,
+						 dac->pbus.pbus->pbdma_bptr);
+}
+
+static void hal2_playback_transfer(struct snd_pcm_substream *substream,
+				   struct snd_pcm_indirect *rec, size_t bytes)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	unsigned char *buf = hal2->dac.buffer + rec->hw_data;
+
+	memcpy(buf, substream->runtime->dma_area + rec->sw_data, bytes);
+	dma_sync_single_for_device(hal2->card->dev,
+			hal2->dac.buffer_dma + rec->hw_data, bytes,
+			DMA_TO_DEVICE);
+
+}
+
+static int hal2_playback_ack(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct hal2_codec *dac = &hal2->dac;
+
+	return snd_pcm_indirect_playback_transfer(substream,
+						  &dac->pcm_indirect,
+						  hal2_playback_transfer);
+}
+
+static int hal2_capture_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	runtime->hw = hal2_pcm_hw;
+	return hal2_alloc_dmabuf(hal2, &hal2->adc, DMA_FROM_DEVICE);
+}
+
+static int hal2_capture_close(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	hal2_free_dmabuf(hal2, &hal2->adc, DMA_FROM_DEVICE);
+	return 0;
+}
+
+static int hal2_capture_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct hal2_codec *adc = &hal2->adc;
+
+	adc->voices = runtime->channels;
+	adc->sample_rate = hal2_compute_rate(adc, runtime->rate);
+	memset(&adc->pcm_indirect, 0, sizeof(adc->pcm_indirect));
+	adc->pcm_indirect.hw_buffer_size = H2_BUF_SIZE;
+	adc->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2;
+	adc->pcm_indirect.hw_io = adc->buffer_dma;
+	adc->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
+	adc->substream = substream;
+	hal2_setup_adc(hal2);
+	return 0;
+}
+
+static int hal2_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		hal2_start_adc(hal2);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		hal2_stop_adc(hal2);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static snd_pcm_uframes_t
+hal2_capture_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct hal2_codec *adc = &hal2->adc;
+
+	return snd_pcm_indirect_capture_pointer(substream, &adc->pcm_indirect,
+						adc->pbus.pbus->pbdma_bptr);
+}
+
+static void hal2_capture_transfer(struct snd_pcm_substream *substream,
+				  struct snd_pcm_indirect *rec, size_t bytes)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	unsigned char *buf = hal2->adc.buffer + rec->hw_data;
+
+	dma_sync_single_for_cpu(hal2->card->dev,
+			hal2->adc.buffer_dma + rec->hw_data, bytes,
+			DMA_FROM_DEVICE);
+	memcpy(substream->runtime->dma_area + rec->sw_data, buf, bytes);
+}
+
+static int hal2_capture_ack(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct hal2_codec *adc = &hal2->adc;
+
+	return snd_pcm_indirect_capture_transfer(substream,
+						 &adc->pcm_indirect,
+						 hal2_capture_transfer);
+}
+
+static const struct snd_pcm_ops hal2_playback_ops = {
+	.open =        hal2_playback_open,
+	.close =       hal2_playback_close,
+	.prepare =     hal2_playback_prepare,
+	.trigger =     hal2_playback_trigger,
+	.pointer =     hal2_playback_pointer,
+	.ack =         hal2_playback_ack,
+};
+
+static const struct snd_pcm_ops hal2_capture_ops = {
+	.open =        hal2_capture_open,
+	.close =       hal2_capture_close,
+	.prepare =     hal2_capture_prepare,
+	.trigger =     hal2_capture_trigger,
+	.pointer =     hal2_capture_pointer,
+	.ack =         hal2_capture_ack,
+};
+
+static int hal2_pcm_create(struct snd_hal2 *hal2)
+{
+	struct snd_pcm *pcm;
+	int err;
+
+	/* create first pcm device with one outputs and one input */
+	err = snd_pcm_new(hal2->card, "SGI HAL2 Audio", 0, 1, 1, &pcm);
+	if (err < 0)
+		return err;
+
+	pcm->private_data = hal2;
+	strcpy(pcm->name, "SGI HAL2");
+
+	/* set operators */
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+			&hal2_playback_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+			&hal2_capture_ops);
+	snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+				       NULL, 0, 1024 * 1024);
+
+	return 0;
+}
+
+static int hal2_dev_free(struct snd_device *device)
+{
+	struct snd_hal2 *hal2 = device->device_data;
+
+	free_irq(SGI_HPCDMA_IRQ, hal2);
+	kfree(hal2);
+	return 0;
+}
+
+static const struct snd_device_ops hal2_ops = {
+	.dev_free = hal2_dev_free,
+};
+
+static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3,
+			    int index)
+{
+	codec->pbus.pbusnr = index;
+	codec->pbus.pbus = &hpc3->pbdma[index];
+}
+
+static int hal2_detect(struct snd_hal2 *hal2)
+{
+	unsigned short board, major, minor;
+	unsigned short rev;
+
+	/* reset HAL2 */
+	hal2_write(0, &hal2->ctl_regs->isr);
+
+	/* release reset */
+	hal2_write(H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N,
+		   &hal2->ctl_regs->isr);
+
+
+	hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE);
+	rev = hal2_read(&hal2->ctl_regs->rev);
+	if (rev & H2_REV_AUDIO_PRESENT)
+		return -ENODEV;
+
+	board = (rev & H2_REV_BOARD_M) >> 12;
+	major = (rev & H2_REV_MAJOR_CHIP_M) >> 4;
+	minor = (rev & H2_REV_MINOR_CHIP_M);
+
+	printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n",
+	       board, major, minor);
+
+	return 0;
+}
+
+static int hal2_create(struct snd_card *card, struct snd_hal2 **rchip)
+{
+	struct snd_hal2 *hal2;
+	struct hpc3_regs *hpc3 = hpc3c0;
+	int err;
+
+	hal2 = kzalloc(sizeof(*hal2), GFP_KERNEL);
+	if (!hal2)
+		return -ENOMEM;
+
+	hal2->card = card;
+
+	if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED,
+			"SGI HAL2", hal2)) {
+		printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ);
+		kfree(hal2);
+		return -EAGAIN;
+	}
+
+	hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0];
+	hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1];
+	hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2];
+	hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3];
+
+	if (hal2_detect(hal2) < 0) {
+		kfree(hal2);
+		return -ENODEV;
+	}
+
+	hal2_init_codec(&hal2->dac, hpc3, 0);
+	hal2_init_codec(&hal2->adc, hpc3, 1);
+
+	/*
+	 * All DMA channel interfaces in HAL2 are designed to operate with
+	 * PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles
+	 * in D5. HAL2 is a 16-bit device which can accept both big and little
+	 * endian format. It assumes that even address bytes are on high
+	 * portion of PBUS (15:8) and assumes that HPC3 is programmed to
+	 * accept a live (unsynchronized) version of P_DREQ_N from HAL2.
+	 */
+#define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \
+			  (2 << HPC3_DMACFG_D4R_SHIFT) | \
+			  (2 << HPC3_DMACFG_D5R_SHIFT) | \
+			  (0 << HPC3_DMACFG_D3W_SHIFT) | \
+			  (2 << HPC3_DMACFG_D4W_SHIFT) | \
+			  (2 << HPC3_DMACFG_D5W_SHIFT) | \
+				HPC3_DMACFG_DS16 | \
+				HPC3_DMACFG_EVENHI | \
+				HPC3_DMACFG_RTIME | \
+			  (8 << HPC3_DMACFG_BURST_SHIFT) | \
+				HPC3_DMACFG_DRQLIVE)
+	/*
+	 * Ignore what's mentioned in the specification and write value which
+	 * works in The Real World (TM)
+	 */
+	hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844;
+	hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, hal2, &hal2_ops);
+	if (err < 0) {
+		free_irq(SGI_HPCDMA_IRQ, hal2);
+		kfree(hal2);
+		return err;
+	}
+	*rchip = hal2;
+	return 0;
+}
+
+static int hal2_probe(struct platform_device *pdev)
+{
+	struct snd_card *card;
+	struct snd_hal2 *chip;
+	int err;
+
+	err = snd_card_new(&pdev->dev, index, id, THIS_MODULE, 0, &card);
+	if (err < 0)
+		return err;
+
+	err = hal2_create(card, &chip);
+	if (err < 0) {
+		snd_card_free(card);
+		return err;
+	}
+
+	err = hal2_pcm_create(chip);
+	if (err < 0) {
+		snd_card_free(card);
+		return err;
+	}
+	err = hal2_mixer_create(chip);
+	if (err < 0) {
+		snd_card_free(card);
+		return err;
+	}
+
+	strcpy(card->driver, "SGI HAL2 Audio");
+	strcpy(card->shortname, "SGI HAL2 Audio");
+	sprintf(card->longname, "%s irq %i",
+		card->shortname,
+		SGI_HPCDMA_IRQ);
+
+	err = snd_card_register(card);
+	if (err < 0) {
+		snd_card_free(card);
+		return err;
+	}
+	platform_set_drvdata(pdev, card);
+	return 0;
+}
+
+static int hal2_remove(struct platform_device *pdev)
+{
+	struct snd_card *card = platform_get_drvdata(pdev);
+
+	snd_card_free(card);
+	return 0;
+}
+
+static struct platform_driver hal2_driver = {
+	.probe	= hal2_probe,
+	.remove	= hal2_remove,
+	.driver = {
+		.name	= "sgihal2",
+	}
+};
+
+module_platform_driver(hal2_driver);