Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 361 insertions, 0 deletions

diff --git a/sound/pci/lx6464es/lx_defs.h b/sound/pci/lx6464es/lx_defs.h
new file mode 100644
index 000000000..eca5367ba
--- /dev/null
+++ b/sound/pci/lx6464es/lx_defs.h
@@ -0,0 +1,361 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * adapted upstream headers
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ */
+
+#ifndef LX_DEFS_H
+#define LX_DEFS_H
+
+/* code adapted from ethersound.h */
+#define	XES_FREQ_COUNT8_MASK    0x00001FFF /* compteur 25MHz entre 8 ech. */
+#define	XES_FREQ_COUNT8_44_MIN  0x00001288 /* 25M /
+					    * [ 44k - ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+#define	XES_FREQ_COUNT8_44_MAX	0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+#define	XES_FREQ_COUNT8_48_MAX	0x00000F08 /* 25M /
+					    * [ 48k + ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+
+/* code adapted from LXES_registers.h */
+
+#define IOCR_OUTPUTS_OFFSET 0	/* (rw) offset for the number of OUTs in the
+				 * ConfES register. */
+#define IOCR_INPUTS_OFFSET  8	/* (rw) offset for the number of INs in the
+				 * ConfES register. */
+#define FREQ_RATIO_OFFSET  19	/* (rw) offset for frequency ratio in the
+				 * ConfES register. */
+#define	FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio:
+				     * sample rate = frequency rate. */
+
+#define CONFES_READ_PART_MASK	0x00070000
+#define CONFES_WRITE_PART_MASK	0x00F80000
+
+/* code adapted from if_drv_mb.h */
+
+#define MASK_SYS_STATUS_ERROR	(1L << 31) /* events that lead to a PCI irq if
+					    * not yet pending */
+#define MASK_SYS_STATUS_URUN	(1L << 30)
+#define MASK_SYS_STATUS_ORUN	(1L << 29)
+#define MASK_SYS_STATUS_EOBO	(1L << 28)
+#define MASK_SYS_STATUS_EOBI	(1L << 27)
+#define MASK_SYS_STATUS_FREQ	(1L << 26)
+#define MASK_SYS_STATUS_ESA	(1L << 25) /* reserved, this is set by the
+					    * XES */
+#define MASK_SYS_STATUS_TIMER	(1L << 24)
+
+#define MASK_SYS_ASYNC_EVENTS	(MASK_SYS_STATUS_ERROR |		\
+				 MASK_SYS_STATUS_URUN  |		\
+				 MASK_SYS_STATUS_ORUN  |		\
+				 MASK_SYS_STATUS_EOBO  |		\
+				 MASK_SYS_STATUS_EOBI  |		\
+				 MASK_SYS_STATUS_FREQ  |		\
+				 MASK_SYS_STATUS_ESA)
+
+#define MASK_SYS_PCI_EVENTS		(MASK_SYS_ASYNC_EVENTS |	\
+					 MASK_SYS_STATUS_TIMER)
+
+#define MASK_SYS_TIMER_COUNT	0x0000FFFF
+
+#define MASK_SYS_STATUS_EOT_PLX		(1L << 22) /* event that remains
+						    * internal: reserved fo end
+						    * of plx dma */
+#define MASK_SYS_STATUS_XES		(1L << 21) /* event that remains
+						    * internal: pending XES
+						    * IRQ */
+#define MASK_SYS_STATUS_CMD_DONE	(1L << 20) /* alternate command
+						    * management: notify driver
+						    * instead of polling */
+
+
+#define MAX_STREAM_BUFFER 5	/* max amount of stream buffers. */
+
+#define MICROBLAZE_IBL_MIN		 32
+#define MICROBLAZE_IBL_DEFAULT	        128
+#define MICROBLAZE_IBL_MAX		512
+/* #define MASK_GRANULARITY		(2*MICROBLAZE_IBL_MAX-1) */
+
+
+
+/* command opcodes, see reference for details */
+
+/*
+ the capture bit position in the object_id field in driver commands
+ depends upon the number of managed channels. For now, 64 IN + 64 OUT are
+ supported. HOwever, the communication protocol forsees 1024 channels, hence
+ bit 10 indicates a capture (input) object).
+*/
+#define ID_IS_CAPTURE (1L << 10)
+#define ID_OFFSET	13	/* object ID is at the 13th bit in the
+				 * 1st command word.*/
+#define ID_CH_MASK    0x3F
+#define OPCODE_OFFSET	24	/* offset of the command opcode in the first
+				 * command word.*/
+
+enum cmd_mb_opcodes {
+	CMD_00_INFO_DEBUG	        = 0x00,
+	CMD_01_GET_SYS_CFG		= 0x01,
+	CMD_02_SET_GRANULARITY		= 0x02,
+	CMD_03_SET_TIMER_IRQ		= 0x03,
+	CMD_04_GET_EVENT		= 0x04,
+	CMD_05_GET_PIPES		= 0x05,
+
+	CMD_06_ALLOCATE_PIPE            = 0x06,
+	CMD_07_RELEASE_PIPE		= 0x07,
+	CMD_08_ASK_BUFFERS		= 0x08,
+	CMD_09_STOP_PIPE		= 0x09,
+	CMD_0A_GET_PIPE_SPL_COUNT	= 0x0a,
+	CMD_0B_TOGGLE_PIPE_STATE	= 0x0b,
+
+	CMD_0C_DEF_STREAM		= 0x0c,
+	CMD_0D_SET_MUTE			= 0x0d,
+	CMD_0E_GET_STREAM_SPL_COUNT     = 0x0e,
+	CMD_0F_UPDATE_BUFFER		= 0x0f,
+	CMD_10_GET_BUFFER		= 0x10,
+	CMD_11_CANCEL_BUFFER		= 0x11,
+	CMD_12_GET_PEAK			= 0x12,
+	CMD_13_SET_STREAM_STATE		= 0x13,
+	CMD_14_INVALID			= 0x14,
+};
+
+/* pipe states */
+enum pipe_state_t {
+	PSTATE_IDLE	= 0,	/* the pipe is not processed in the XES_IRQ
+				 * (free or stopped, or paused). */
+	PSTATE_RUN	= 1,	/* sustained play/record state. */
+	PSTATE_PURGE	= 2,	/* the ES channels are now off, render pipes do
+				 * not DMA, record pipe do a last DMA. */
+	PSTATE_ACQUIRE	= 3,	/* the ES channels are now on, render pipes do
+				 * not yet increase their sample count, record
+				 * pipes do not DMA. */
+	PSTATE_CLOSING	= 4,	/* the pipe is releasing, and may not yet
+				 * receive an "alloc" command. */
+};
+
+/* stream states */
+enum stream_state_t {
+	SSTATE_STOP	=  0x00,       /* setting to stop resets the stream spl
+					* count.*/
+	SSTATE_RUN	= (0x01 << 0), /* start DMA and spl count handling. */
+	SSTATE_PAUSE	= (0x01 << 1), /* pause DMA and spl count handling. */
+};
+
+/* buffer flags */
+enum buffer_flags {
+	BF_VALID	= 0x80,	/* set if the buffer is valid, clear if free.*/
+	BF_CURRENT	= 0x40,	/* set if this is the current buffer (there is
+				 * always a current buffer).*/
+	BF_NOTIFY_EOB	= 0x20,	/* set if this buffer must cause a PCI event
+				 * when finished.*/
+	BF_CIRCULAR	= 0x10,	/* set if buffer[1] must be copied to buffer[0]
+				 * by the end of this buffer.*/
+	BF_64BITS_ADR	= 0x08,	/* set if the hi part of the address is valid.*/
+	BF_xx		= 0x04,	/* future extension.*/
+	BF_EOB		= 0x02,	/* set if finished, but not yet free.*/
+	BF_PAUSE	= 0x01,	/* pause stream at buffer end.*/
+	BF_ZERO		= 0x00,	/* no flags (init).*/
+};
+
+/*
+*	Stream Flags definitions
+*/
+enum stream_flags {
+	SF_ZERO		= 0x00000000, /* no flags (stream invalid). */
+	SF_VALID	= 0x10000000, /* the stream has a valid DMA_conf
+				       * info (setstreamformat). */
+	SF_XRUN		= 0x20000000, /* the stream is un x-run state. */
+	SF_START	= 0x40000000, /* the DMA is running.*/
+	SF_ASIO		= 0x80000000, /* ASIO.*/
+};
+
+
+#define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */
+#define PSTATE_OFFSET             28 /* 4 MSBits are status bits */
+
+
+#define MASK_STREAM_HAS_MAPPING	(1L << 12)
+#define MASK_STREAM_IS_ASIO	(1L <<  9)
+#define STREAM_FMT_OFFSET	10   /* the stream fmt bits start at the 10th
+				      * bit in the command word. */
+
+#define STREAM_FMT_16b          0x02
+#define STREAM_FMT_intel        0x01
+
+#define FREQ_FIELD_OFFSET	15  /* offset of the freq field in the response
+				     * word */
+
+#define BUFF_FLAGS_OFFSET	  24 /*  offset of the buffer flags in the
+				      *  response word. */
+#define MASK_DATA_SIZE	  0x00FFFFFF /* this must match the field size of
+				      * datasize in the buffer_t structure. */
+
+#define MASK_BUFFER_ID	        0xFF /* the cancel command awaits a buffer ID,
+				      * may be 0xFF for "current". */
+
+
+/* code adapted from PcxErr_e.h */
+
+/* Bits masks */
+
+#define ERROR_MASK              0x8000
+
+#define SOURCE_MASK             0x7800
+
+#define E_SOURCE_BOARD          0x4000 /* 8 >> 1 */
+#define E_SOURCE_DRV            0x2000 /* 4 >> 1 */
+#define E_SOURCE_API            0x1000 /* 2 >> 1 */
+/* Error tools */
+#define E_SOURCE_TOOLS          0x0800 /* 1 >> 1 */
+/* Error pcxaudio */
+#define E_SOURCE_AUDIO          0x1800 /* 3 >> 1 */
+/* Error virtual pcx */
+#define E_SOURCE_VPCX           0x2800 /* 5 >> 1 */
+/* Error dispatcher */
+#define E_SOURCE_DISPATCHER     0x3000 /* 6 >> 1 */
+/* Error from CobraNet firmware */
+#define E_SOURCE_COBRANET       0x3800 /* 7 >> 1 */
+
+#define E_SOURCE_USER           0x7800
+
+#define CLASS_MASK              0x0700
+
+#define CODE_MASK               0x00FF
+
+/* Bits values */
+
+/* Values for the error/warning bit */
+#define ERROR_VALUE             0x8000
+#define WARNING_VALUE           0x0000
+
+/* Class values */
+#define E_CLASS_GENERAL                  0x0000
+#define E_CLASS_INVALID_CMD              0x0100
+#define E_CLASS_INVALID_STD_OBJECT       0x0200
+#define E_CLASS_RSRC_IMPOSSIBLE          0x0300
+#define E_CLASS_WRONG_CONTEXT            0x0400
+#define E_CLASS_BAD_SPECIFIC_PARAMETER   0x0500
+#define E_CLASS_REAL_TIME_ERROR          0x0600
+#define E_CLASS_DIRECTSHOW               0x0700
+#define E_CLASS_FREE                     0x0700
+
+
+/* Complete DRV error code for the general class */
+#define ED_GN           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL)
+#define ED_CONCURRENCY                  (ED_GN | 0x01)
+#define ED_DSP_CRASHED                  (ED_GN | 0x02)
+#define ED_UNKNOWN_BOARD                (ED_GN | 0x03)
+#define ED_NOT_INSTALLED                (ED_GN | 0x04)
+#define ED_CANNOT_OPEN_SVC_MANAGER      (ED_GN | 0x05)
+#define ED_CANNOT_READ_REGISTRY         (ED_GN | 0x06)
+#define ED_DSP_VERSION_MISMATCH         (ED_GN | 0x07)
+#define ED_UNAVAILABLE_FEATURE          (ED_GN | 0x08)
+#define ED_CANCELLED                    (ED_GN | 0x09)
+#define ED_NO_RESPONSE_AT_IRQA          (ED_GN | 0x10)
+#define ED_INVALID_ADDRESS              (ED_GN | 0x11)
+#define ED_DSP_CORRUPTED                (ED_GN | 0x12)
+#define ED_PENDING_OPERATION            (ED_GN | 0x13)
+#define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE   (ED_GN | 0x14)
+#define ED_NET_REGISTER_ERROR               (ED_GN | 0x15)
+#define ED_NET_THREAD_ERROR                 (ED_GN | 0x16)
+#define ED_NET_OPEN_ERROR                   (ED_GN | 0x17)
+#define ED_NET_CLOSE_ERROR                  (ED_GN | 0x18)
+#define ED_NET_NO_MORE_PACKET               (ED_GN | 0x19)
+#define ED_NET_NO_MORE_BUFFER               (ED_GN | 0x1A)
+#define ED_NET_SEND_ERROR                   (ED_GN | 0x1B)
+#define ED_NET_RECEIVE_ERROR                (ED_GN | 0x1C)
+#define ED_NET_WRONG_MSG_SIZE               (ED_GN | 0x1D)
+#define ED_NET_WAIT_ERROR                   (ED_GN | 0x1E)
+#define ED_NET_EEPROM_ERROR                 (ED_GN | 0x1F)
+#define ED_INVALID_RS232_COM_NUMBER         (ED_GN | 0x20)
+#define ED_INVALID_RS232_INIT               (ED_GN | 0x21)
+#define ED_FILE_ERROR                       (ED_GN | 0x22)
+#define ED_INVALID_GPIO_CMD                 (ED_GN | 0x23)
+#define ED_RS232_ALREADY_OPENED             (ED_GN | 0x24)
+#define ED_RS232_NOT_OPENED                 (ED_GN | 0x25)
+#define ED_GPIO_ALREADY_OPENED              (ED_GN | 0x26)
+#define ED_GPIO_NOT_OPENED                  (ED_GN | 0x27)
+#define ED_REGISTRY_ERROR                   (ED_GN | 0x28) /* <- NCX */
+#define ED_INVALID_SERVICE                  (ED_GN | 0x29) /* <- NCX */
+
+#define ED_READ_FILE_ALREADY_OPENED	    (ED_GN | 0x2a) /* <- Decalage
+							    * pour RCX
+							    * (old 0x28)
+							    * */
+#define ED_READ_FILE_INVALID_COMMAND	    (ED_GN | 0x2b) /* ~ */
+#define ED_READ_FILE_INVALID_PARAMETER	    (ED_GN | 0x2c) /* ~ */
+#define ED_READ_FILE_ALREADY_CLOSED	    (ED_GN | 0x2d) /* ~ */
+#define ED_READ_FILE_NO_INFORMATION	    (ED_GN | 0x2e) /* ~ */
+#define ED_READ_FILE_INVALID_HANDLE	    (ED_GN | 0x2f) /* ~ */
+#define ED_READ_FILE_END_OF_FILE	    (ED_GN | 0x30) /* ~ */
+#define ED_READ_FILE_ERROR	            (ED_GN | 0x31) /* ~ */
+
+#define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour
+							     * PCX (old 0x14) */
+#define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */
+#define ED_DSP_CRASHED_EXC_ILLEGAL           (ED_GN | 0x34) /* ~ */
+#define ED_DSP_CRASHED_EXC_TIMER_REENTRY     (ED_GN | 0x35) /* ~ */
+#define ED_DSP_CRASHED_EXC_FATAL_ERROR       (ED_GN | 0x36) /* ~ */
+
+#define ED_FLASH_PCCARD_NOT_PRESENT          (ED_GN | 0x37)
+
+#define ED_NO_CURRENT_CLOCK                  (ED_GN | 0x38)
+
+/* Complete DRV error code for real time class */
+#define ED_RT           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR)
+#define ED_DSP_TIMED_OUT                (ED_RT | 0x01)
+#define ED_DSP_CHK_TIMED_OUT            (ED_RT | 0x02)
+#define ED_STREAM_OVERRUN               (ED_RT | 0x03)
+#define ED_DSP_BUSY                     (ED_RT | 0x04)
+#define ED_DSP_SEMAPHORE_TIME_OUT       (ED_RT | 0x05)
+#define ED_BOARD_TIME_OUT               (ED_RT | 0x06)
+#define ED_XILINX_ERROR                 (ED_RT | 0x07)
+#define ED_COBRANET_ITF_NOT_RESPONDING  (ED_RT | 0x08)
+
+/* Complete BOARD error code for the invaid standard object class */
+#define EB_ISO          (ERROR_VALUE | E_SOURCE_BOARD | \
+			 E_CLASS_INVALID_STD_OBJECT)
+#define EB_INVALID_EFFECT               (EB_ISO | 0x00)
+#define EB_INVALID_PIPE                 (EB_ISO | 0x40)
+#define EB_INVALID_STREAM               (EB_ISO | 0x80)
+#define EB_INVALID_AUDIO                (EB_ISO | 0xC0)
+
+/* Complete BOARD error code for impossible resource allocation class */
+#define EB_RI           (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE)
+#define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01)
+#define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE           (EB_RI | 0x02)
+
+#define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE		\
+	EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE
+#define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE			\
+	EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE
+
+#define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE     (EB_RI | 0x03)
+#define EB_TOO_MANY_DIFFERED_CMD                (EB_RI | 0x04)
+#define EB_RBUFFERS_TABLE_OVERFLOW              (EB_RI | 0x05)
+#define EB_ALLOCATE_EFFECTS_IMPOSSIBLE          (EB_RI | 0x08)
+#define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE       (EB_RI | 0x09)
+#define EB_RBUFFER_NOT_AVAILABLE                (EB_RI | 0x0A)
+#define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE     (EB_RI | 0x0B)
+#define EB_STATUS_DIALOG_IMPOSSIBLE             (EB_RI | 0x1D)
+#define EB_CONTROL_CMD_IMPOSSIBLE               (EB_RI | 0x1E)
+#define EB_STATUS_SEND_IMPOSSIBLE               (EB_RI | 0x1F)
+#define EB_ALLOCATE_PIPE_IMPOSSIBLE             (EB_RI | 0x40)
+#define EB_ALLOCATE_STREAM_IMPOSSIBLE           (EB_RI | 0x80)
+#define EB_ALLOCATE_AUDIO_IMPOSSIBLE            (EB_RI | 0xC0)
+
+/* Complete BOARD error code for wrong call context class */
+#define EB_WCC          (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT)
+#define EB_CMD_REFUSED                  (EB_WCC | 0x00)
+#define EB_START_STREAM_REFUSED         (EB_WCC | 0xFC)
+#define EB_SPC_REFUSED                  (EB_WCC | 0xFD)
+#define EB_CSN_REFUSED                  (EB_WCC | 0xFE)
+#define EB_CSE_REFUSED                  (EB_WCC | 0xFF)
+
+
+
+
+#endif /* LX_DEFS_H */