Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 412 insertions, 0 deletions

diff --git a/sound/pci/pcxhr/pcxhr_hwdep.c b/sound/pci/pcxhr/pcxhr_hwdep.c
new file mode 100644
index 000000000..249805065
--- /dev/null
+++ b/sound/pci/pcxhr/pcxhr_hwdep.c
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Digigram pcxhr compatible soundcards
+ *
+ * hwdep device manager
+ *
+ * Copyright (c) 2004 by Digigram <alsa@digigram.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/firmware.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/hwdep.h>
+#include "pcxhr.h"
+#include "pcxhr_mixer.h"
+#include "pcxhr_hwdep.h"
+#include "pcxhr_core.h"
+#include "pcxhr_mix22.h"
+
+
+static int pcxhr_sub_init(struct pcxhr_mgr *mgr);
+/*
+ * get basic information and init pcxhr card
+ */
+static int pcxhr_init_board(struct pcxhr_mgr *mgr)
+{
+	int err;
+	struct pcxhr_rmh rmh;
+	int card_streams;
+
+	/* calc the number of all streams used */
+	if (mgr->mono_capture)
+		card_streams = mgr->capture_chips * 2;
+	else
+		card_streams = mgr->capture_chips;
+	card_streams += mgr->playback_chips * PCXHR_PLAYBACK_STREAMS;
+
+	/* enable interrupts */
+	pcxhr_enable_dsp(mgr);
+
+	pcxhr_init_rmh(&rmh, CMD_SUPPORTED);
+	err = pcxhr_send_msg(mgr, &rmh);
+	if (err)
+		return err;
+	/* test 4, 8 or 12 phys out */
+	if ((rmh.stat[0] & MASK_FIRST_FIELD) < mgr->playback_chips * 2)
+		return -EINVAL;
+	/* test 4, 8 or 2 phys in */
+	if (((rmh.stat[0] >> (2 * FIELD_SIZE)) & MASK_FIRST_FIELD) <
+	    mgr->capture_chips * 2)
+		return -EINVAL;
+	/* test max nb substream per board */
+	if ((rmh.stat[1] & 0x5F) < card_streams)
+		return -EINVAL;
+	/* test max nb substream per pipe */
+	if (((rmh.stat[1] >> 7) & 0x5F) < PCXHR_PLAYBACK_STREAMS)
+		return -EINVAL;
+	dev_dbg(&mgr->pci->dev,
+		"supported formats : playback=%x capture=%x\n",
+		    rmh.stat[2], rmh.stat[3]);
+
+	pcxhr_init_rmh(&rmh, CMD_VERSION);
+	/* firmware num for DSP */
+	rmh.cmd[0] |= mgr->firmware_num;
+	/* transfer granularity in samples (should be multiple of 48) */
+	rmh.cmd[1] = (1<<23) + mgr->granularity;
+	rmh.cmd_len = 2;
+	err = pcxhr_send_msg(mgr, &rmh);
+	if (err)
+		return err;
+	dev_dbg(&mgr->pci->dev,
+		"PCXHR DSP version is %d.%d.%d\n", (rmh.stat[0]>>16)&0xff,
+		    (rmh.stat[0]>>8)&0xff, rmh.stat[0]&0xff);
+	mgr->dsp_version = rmh.stat[0];
+
+	if (mgr->is_hr_stereo)
+		err = hr222_sub_init(mgr);
+	else
+		err = pcxhr_sub_init(mgr);
+	return err;
+}
+
+static int pcxhr_sub_init(struct pcxhr_mgr *mgr)
+{
+	int err;
+	struct pcxhr_rmh rmh;
+
+	/* get options */
+	pcxhr_init_rmh(&rmh, CMD_ACCESS_IO_READ);
+	rmh.cmd[0] |= IO_NUM_REG_STATUS;
+	rmh.cmd[1]  = REG_STATUS_OPTIONS;
+	rmh.cmd_len = 2;
+	err = pcxhr_send_msg(mgr, &rmh);
+	if (err)
+		return err;
+
+	if ((rmh.stat[1] & REG_STATUS_OPT_DAUGHTER_MASK) ==
+	    REG_STATUS_OPT_ANALOG_BOARD)
+		mgr->board_has_analog = 1;	/* analog addon board found */
+
+	/* unmute inputs */
+	err = pcxhr_write_io_num_reg_cont(mgr, REG_CONT_UNMUTE_INPUTS,
+					  REG_CONT_UNMUTE_INPUTS, NULL);
+	if (err)
+		return err;
+	/* unmute outputs (a write to IO_NUM_REG_MUTE_OUT mutes!) */
+	pcxhr_init_rmh(&rmh, CMD_ACCESS_IO_READ);
+	rmh.cmd[0] |= IO_NUM_REG_MUTE_OUT;
+	if (DSP_EXT_CMD_SET(mgr)) {
+		rmh.cmd[1]  = 1;	/* unmute digital plugs */
+		rmh.cmd_len = 2;
+	}
+	err = pcxhr_send_msg(mgr, &rmh);
+	return err;
+}
+
+void pcxhr_reset_board(struct pcxhr_mgr *mgr)
+{
+	struct pcxhr_rmh rmh;
+
+	if (mgr->dsp_loaded & (1 << PCXHR_FIRMWARE_DSP_MAIN_INDEX)) {
+		/* mute outputs */
+	    if (!mgr->is_hr_stereo) {
+		/* a read to IO_NUM_REG_MUTE_OUT register unmutes! */
+		pcxhr_init_rmh(&rmh, CMD_ACCESS_IO_WRITE);
+		rmh.cmd[0] |= IO_NUM_REG_MUTE_OUT;
+		pcxhr_send_msg(mgr, &rmh);
+		/* mute inputs */
+		pcxhr_write_io_num_reg_cont(mgr, REG_CONT_UNMUTE_INPUTS,
+					    0, NULL);
+	    }
+		/* stereo cards mute with reset of dsp */
+	}
+	/* reset pcxhr dsp */
+	if (mgr->dsp_loaded & (1 << PCXHR_FIRMWARE_DSP_EPRM_INDEX))
+		pcxhr_reset_dsp(mgr);
+	/* reset second xilinx */
+	if (mgr->dsp_loaded & (1 << PCXHR_FIRMWARE_XLX_COM_INDEX)) {
+		pcxhr_reset_xilinx_com(mgr);
+		mgr->dsp_loaded = 1;
+	}
+	return;
+}
+
+
+/*
+ *  allocate a playback/capture pipe (pcmp0/pcmc0)
+ */
+static int pcxhr_dsp_allocate_pipe(struct pcxhr_mgr *mgr,
+				   struct pcxhr_pipe *pipe,
+				   int is_capture, int pin)
+{
+	int stream_count, audio_count;
+	int err;
+	struct pcxhr_rmh rmh;
+
+	if (is_capture) {
+		stream_count = 1;
+		if (mgr->mono_capture)
+			audio_count = 1;
+		else
+			audio_count = 2;
+	} else {
+		stream_count = PCXHR_PLAYBACK_STREAMS;
+		audio_count = 2;	/* always stereo */
+	}
+	dev_dbg(&mgr->pci->dev, "snd_add_ref_pipe pin(%d) pcm%c0\n",
+		    pin, is_capture ? 'c' : 'p');
+	pipe->is_capture = is_capture;
+	pipe->first_audio = pin;
+	/* define pipe (P_PCM_ONLY_MASK (0x020000) is not necessary) */
+	pcxhr_init_rmh(&rmh, CMD_RES_PIPE);
+	pcxhr_set_pipe_cmd_params(&rmh, is_capture, pin,
+				  audio_count, stream_count);
+	rmh.cmd[1] |= 0x020000; /* add P_PCM_ONLY_MASK */
+	if (DSP_EXT_CMD_SET(mgr)) {
+		/* add channel mask to command */
+	  rmh.cmd[rmh.cmd_len++] = (audio_count == 1) ? 0x01 : 0x03;
+	}
+	err = pcxhr_send_msg(mgr, &rmh);
+	if (err < 0) {
+		dev_err(&mgr->pci->dev, "error pipe allocation "
+			   "(CMD_RES_PIPE) err=%x!\n", err);
+		return err;
+	}
+	pipe->status = PCXHR_PIPE_DEFINED;
+
+	return 0;
+}
+
+/*
+ *  free playback/capture pipe (pcmp0/pcmc0)
+ */
+#if 0
+static int pcxhr_dsp_free_pipe( struct pcxhr_mgr *mgr, struct pcxhr_pipe *pipe)
+{
+	struct pcxhr_rmh rmh;
+	int capture_mask = 0;
+	int playback_mask = 0;
+	int err = 0;
+
+	if (pipe->is_capture)
+		capture_mask  = (1 << pipe->first_audio);
+	else
+		playback_mask = (1 << pipe->first_audio);
+
+	/* stop one pipe */
+	err = pcxhr_set_pipe_state(mgr, playback_mask, capture_mask, 0);
+	if (err < 0)
+		dev_err(&mgr->pci->dev, "error stopping pipe!\n");
+	/* release the pipe */
+	pcxhr_init_rmh(&rmh, CMD_FREE_PIPE);
+	pcxhr_set_pipe_cmd_params(&rmh, pipe->is_capture, pipe->first_audio,
+				  0, 0);
+	err = pcxhr_send_msg(mgr, &rmh);
+	if (err < 0)
+		dev_err(&mgr->pci->dev, "error pipe release "
+			   "(CMD_FREE_PIPE) err(%x)\n", err);
+	pipe->status = PCXHR_PIPE_UNDEFINED;
+	return err;
+}
+#endif
+
+
+static int pcxhr_config_pipes(struct pcxhr_mgr *mgr)
+{
+	int err, i, j;
+	struct snd_pcxhr *chip;
+	struct pcxhr_pipe *pipe;
+
+	/* allocate the pipes on the dsp */
+	for (i = 0; i < mgr->num_cards; i++) {
+		chip = mgr->chip[i];
+		if (chip->nb_streams_play) {
+			pipe = &chip->playback_pipe;
+			err = pcxhr_dsp_allocate_pipe( mgr, pipe, 0, i*2);
+			if (err)
+				return err;
+			for(j = 0; j < chip->nb_streams_play; j++)
+				chip->playback_stream[j].pipe = pipe;
+		}
+		for (j = 0; j < chip->nb_streams_capt; j++) {
+			pipe = &chip->capture_pipe[j];
+			err = pcxhr_dsp_allocate_pipe(mgr, pipe, 1, i*2 + j);
+			if (err)
+				return err;
+			chip->capture_stream[j].pipe = pipe;
+		}
+	}
+	return 0;
+}
+
+static int pcxhr_start_pipes(struct pcxhr_mgr *mgr)
+{
+	int i, j;
+	struct snd_pcxhr *chip;
+	int playback_mask = 0;
+	int capture_mask = 0;
+
+	/* start all the pipes on the dsp */
+	for (i = 0; i < mgr->num_cards; i++) {
+		chip = mgr->chip[i];
+		if (chip->nb_streams_play)
+			playback_mask |= 1 << chip->playback_pipe.first_audio;
+		for (j = 0; j < chip->nb_streams_capt; j++)
+			capture_mask |= 1 << chip->capture_pipe[j].first_audio;
+	}
+	return pcxhr_set_pipe_state(mgr, playback_mask, capture_mask, 1);
+}
+
+
+static int pcxhr_dsp_load(struct pcxhr_mgr *mgr, int index,
+			  const struct firmware *dsp)
+{
+	int err, card_index;
+
+	dev_dbg(&mgr->pci->dev,
+		"loading dsp [%d] size = %zd\n", index, dsp->size);
+
+	switch (index) {
+	case PCXHR_FIRMWARE_XLX_INT_INDEX:
+		pcxhr_reset_xilinx_com(mgr);
+		return pcxhr_load_xilinx_binary(mgr, dsp, 0);
+
+	case PCXHR_FIRMWARE_XLX_COM_INDEX:
+		pcxhr_reset_xilinx_com(mgr);
+		return pcxhr_load_xilinx_binary(mgr, dsp, 1);
+
+	case PCXHR_FIRMWARE_DSP_EPRM_INDEX:
+		pcxhr_reset_dsp(mgr);
+		return pcxhr_load_eeprom_binary(mgr, dsp);
+
+	case PCXHR_FIRMWARE_DSP_BOOT_INDEX:
+		return pcxhr_load_boot_binary(mgr, dsp);
+
+	case PCXHR_FIRMWARE_DSP_MAIN_INDEX:
+		err = pcxhr_load_dsp_binary(mgr, dsp);
+		if (err)
+			return err;
+		break;	/* continue with first init */
+	default:
+		dev_err(&mgr->pci->dev, "wrong file index\n");
+		return -EFAULT;
+	} /* end of switch file index*/
+
+	/* first communication with embedded */
+	err = pcxhr_init_board(mgr);
+        if (err < 0) {
+		dev_err(&mgr->pci->dev, "pcxhr could not be set up\n");
+		return err;
+	}
+	err = pcxhr_config_pipes(mgr);
+        if (err < 0) {
+		dev_err(&mgr->pci->dev, "pcxhr pipes could not be set up\n");
+		return err;
+	}
+       	/* create devices and mixer in accordance with HW options*/
+        for (card_index = 0; card_index < mgr->num_cards; card_index++) {
+		struct snd_pcxhr *chip = mgr->chip[card_index];
+
+		err = pcxhr_create_pcm(chip);
+		if (err < 0)
+			return err;
+
+		if (card_index == 0) {
+			err = pcxhr_create_mixer(chip->mgr);
+			if (err < 0)
+				return err;
+		}
+		err = snd_card_register(chip->card);
+		if (err < 0)
+			return err;
+	}
+	err = pcxhr_start_pipes(mgr);
+        if (err < 0) {
+		dev_err(&mgr->pci->dev, "pcxhr pipes could not be started\n");
+		return err;
+	}
+	dev_dbg(&mgr->pci->dev,
+		"pcxhr firmware downloaded and successfully set up\n");
+
+	return 0;
+}
+
+/*
+ * fw loader entry
+ */
+int pcxhr_setup_firmware(struct pcxhr_mgr *mgr)
+{
+	static const char * const fw_files[][5] = {
+	[0] = { "xlxint.dat", "xlxc882hr.dat",
+		"dspe882.e56", "dspb882hr.b56", "dspd882.d56" },
+	[1] = { "xlxint.dat", "xlxc882e.dat",
+		"dspe882.e56", "dspb882e.b56", "dspd882.d56" },
+	[2] = { "xlxint.dat", "xlxc1222hr.dat",
+		"dspe882.e56", "dspb1222hr.b56", "dspd1222.d56" },
+	[3] = { "xlxint.dat", "xlxc1222e.dat",
+		"dspe882.e56", "dspb1222e.b56", "dspd1222.d56" },
+	[4] = { NULL, "xlxc222.dat",
+		"dspe924.e56", "dspb924.b56", "dspd222.d56" },
+	[5] = { NULL, "xlxc924.dat",
+		"dspe924.e56", "dspb924.b56", "dspd222.d56" },
+	};
+	char path[32];
+
+	const struct firmware *fw_entry;
+	int i, err;
+	int fw_set = mgr->fw_file_set;
+
+	for (i = 0; i < 5; i++) {
+		if (!fw_files[fw_set][i])
+			continue;
+		sprintf(path, "pcxhr/%s", fw_files[fw_set][i]);
+		if (request_firmware(&fw_entry, path, &mgr->pci->dev)) {
+			dev_err(&mgr->pci->dev,
+				"pcxhr: can't load firmware %s\n",
+				   path);
+			return -ENOENT;
+		}
+		/* fake hwdep dsp record */
+		err = pcxhr_dsp_load(mgr, i, fw_entry);
+		release_firmware(fw_entry);
+		if (err < 0)
+			return err;
+		mgr->dsp_loaded |= 1 << i;
+	}
+	return 0;
+}
+
+MODULE_FIRMWARE("pcxhr/xlxint.dat");
+MODULE_FIRMWARE("pcxhr/xlxc882hr.dat");
+MODULE_FIRMWARE("pcxhr/xlxc882e.dat");
+MODULE_FIRMWARE("pcxhr/dspe882.e56");
+MODULE_FIRMWARE("pcxhr/dspb882hr.b56");
+MODULE_FIRMWARE("pcxhr/dspb882e.b56");
+MODULE_FIRMWARE("pcxhr/dspd882.d56");
+
+MODULE_FIRMWARE("pcxhr/xlxc1222hr.dat");
+MODULE_FIRMWARE("pcxhr/xlxc1222e.dat");
+MODULE_FIRMWARE("pcxhr/dspb1222hr.b56");
+MODULE_FIRMWARE("pcxhr/dspb1222e.b56");
+MODULE_FIRMWARE("pcxhr/dspd1222.d56");
+
+MODULE_FIRMWARE("pcxhr/xlxc222.dat");
+MODULE_FIRMWARE("pcxhr/xlxc924.dat");
+MODULE_FIRMWARE("pcxhr/dspe924.e56");
+MODULE_FIRMWARE("pcxhr/dspb924.b56");
+MODULE_FIRMWARE("pcxhr/dspd222.d56");