Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 545 insertions, 0 deletions

diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c
new file mode 100644
index 000000000..0543dda75
--- /dev/null
+++ b/sound/soc/amd/acp3x-rt5682-max9836.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Machine driver for AMD ACP Audio engine using DA7219 & MAX98357 codec.
+//
+//Copyright 2016 Advanced Micro Devices, Inc.
+
+#include <sound/core.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+#include "raven/acp3x.h"
+#include "../codecs/rt5682.h"
+#include "../codecs/rt1015.h"
+
+#define PCO_PLAT_CLK 48000000
+#define RT5682_PLL_FREQ (48000 * 512)
+#define DUAL_CHANNEL		2
+
+static struct snd_soc_jack pco_jack;
+static struct clk *rt5682_dai_wclk;
+static struct clk *rt5682_dai_bclk;
+static struct gpio_desc *dmic_sel;
+void *soc_is_rltk_max(struct device *dev);
+
+enum {
+	RT5682 = 0,
+	MAX,
+	EC,
+};
+
+static int acp3x_5682_init(struct snd_soc_pcm_runtime *rtd)
+{
+	int ret;
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
+
+	dev_info(rtd->dev, "codec dai name = %s\n", codec_dai->name);
+
+	/* set rt5682 dai fmt */
+	ret =  snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+			| SND_SOC_DAIFMT_NB_NF
+			| SND_SOC_DAIFMT_CBP_CFP);
+	if (ret < 0) {
+		dev_err(rtd->card->dev,
+				"Failed to set rt5682 dai fmt: %d\n", ret);
+		return ret;
+	}
+
+	/* set codec PLL */
+	ret = snd_soc_dai_set_pll(codec_dai, RT5682_PLL2, RT5682_PLL2_S_MCLK,
+				  PCO_PLAT_CLK, RT5682_PLL_FREQ);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set rt5682 PLL: %d\n", ret);
+		return ret;
+	}
+
+	/* Set codec sysclk */
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL2,
+			RT5682_PLL_FREQ, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev,
+			"Failed to set rt5682 SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	/* Set tdm/i2s1 master bclk ratio */
+	ret = snd_soc_dai_set_bclk_ratio(codec_dai, 64);
+	if (ret < 0) {
+		dev_err(rtd->dev,
+			"Failed to set rt5682 tdm bclk ratio: %d\n", ret);
+		return ret;
+	}
+
+	rt5682_dai_wclk = clk_get(component->dev, "rt5682-dai-wclk");
+	rt5682_dai_bclk = clk_get(component->dev, "rt5682-dai-bclk");
+
+	ret = snd_soc_card_jack_new(card, "Headset Jack",
+				SND_JACK_HEADSET | SND_JACK_LINEOUT |
+				SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+				SND_JACK_BTN_2 | SND_JACK_BTN_3,
+				&pco_jack);
+	if (ret) {
+		dev_err(card->dev, "HP jack creation failed %d\n", ret);
+		return ret;
+	}
+
+	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
+	ret = snd_soc_component_set_jack(component, &pco_jack, NULL);
+	if (ret) {
+		dev_err(rtd->dev, "Headset Jack call-back failed: %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int rt5682_clk_enable(struct snd_pcm_substream *substream)
+{
+	int ret = 0;
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+
+	/* RT5682 will support only 48K output with 48M mclk */
+	clk_set_rate(rt5682_dai_wclk, 48000);
+	clk_set_rate(rt5682_dai_bclk, 48000 * 64);
+	ret = clk_prepare_enable(rt5682_dai_wclk);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't enable wclk %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int acp3x_1015_hw_params(struct snd_pcm_substream *substream,
+					struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai;
+	int srate, i, ret;
+
+	ret = 0;
+	srate = params_rate(params);
+
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		if (strcmp(codec_dai->name, "rt1015-aif"))
+			continue;
+
+		ret = snd_soc_dai_set_pll(codec_dai, 0, RT1015_PLL_S_BCLK,
+						64 * srate, 256 * srate);
+		if (ret < 0)
+			return ret;
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT1015_SCLK_S_PLL,
+					256 * srate, SND_SOC_CLOCK_IN);
+		if (ret < 0)
+			return ret;
+	}
+	return ret;
+}
+
+static void rt5682_clk_disable(void)
+{
+	clk_disable_unprepare(rt5682_dai_wclk);
+}
+
+static const unsigned int channels[] = {
+	DUAL_CHANNEL,
+};
+
+static const unsigned int rates[] = {
+	48000,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list  = rates,
+	.mask = 0,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_channels = {
+	.count = ARRAY_SIZE(channels),
+	.list = channels,
+	.mask = 0,
+};
+
+static int acp3x_5682_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_card *card = rtd->card;
+	struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card);
+
+	machine->play_i2s_instance = I2S_SP_INSTANCE;
+	machine->cap_i2s_instance = I2S_SP_INSTANCE;
+
+	runtime->hw.channels_max = DUAL_CHANNEL;
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+				   &constraints_channels);
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+				   &constraints_rates);
+	return rt5682_clk_enable(substream);
+}
+
+static int acp3x_max_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_card *card = rtd->card;
+	struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card);
+
+	machine->play_i2s_instance = I2S_BT_INSTANCE;
+
+	runtime->hw.channels_max = DUAL_CHANNEL;
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+				   &constraints_channels);
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+				   &constraints_rates);
+	return rt5682_clk_enable(substream);
+}
+
+static int acp3x_ec_dmic0_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card);
+
+	machine->cap_i2s_instance = I2S_BT_INSTANCE;
+	snd_soc_dai_set_bclk_ratio(codec_dai, 64);
+
+	return rt5682_clk_enable(substream);
+}
+
+static int dmic_switch;
+
+static int dmic_get(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = dmic_switch;
+	return 0;
+}
+
+static int dmic_set(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	if (dmic_sel) {
+		dmic_switch = ucontrol->value.integer.value[0];
+		gpiod_set_value(dmic_sel, dmic_switch);
+	}
+	return 0;
+}
+
+static void rt5682_shutdown(struct snd_pcm_substream *substream)
+{
+	rt5682_clk_disable();
+}
+
+static const struct snd_soc_ops acp3x_5682_ops = {
+	.startup = acp3x_5682_startup,
+	.shutdown = rt5682_shutdown,
+};
+
+static const struct snd_soc_ops acp3x_max_play_ops = {
+	.startup = acp3x_max_startup,
+	.shutdown = rt5682_shutdown,
+	.hw_params = acp3x_1015_hw_params,
+};
+
+static const struct snd_soc_ops acp3x_ec_cap0_ops = {
+	.startup = acp3x_ec_dmic0_startup,
+	.shutdown = rt5682_shutdown,
+};
+
+SND_SOC_DAILINK_DEF(acp3x_i2s,
+	DAILINK_COMP_ARRAY(COMP_CPU("acp3x_i2s_playcap.0")));
+SND_SOC_DAILINK_DEF(acp3x_bt,
+	DAILINK_COMP_ARRAY(COMP_CPU("acp3x_i2s_playcap.2")));
+
+SND_SOC_DAILINK_DEF(rt5682,
+	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5682:00", "rt5682-aif1")));
+SND_SOC_DAILINK_DEF(max,
+	DAILINK_COMP_ARRAY(COMP_CODEC("MX98357A:00", "HiFi")));
+SND_SOC_DAILINK_DEF(rt1015p,
+	DAILINK_COMP_ARRAY(COMP_CODEC("RTL1015:00", "HiFi")));
+SND_SOC_DAILINK_DEF(rt1015,
+	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC1015:00", "rt1015-aif"),
+			COMP_CODEC("i2c-10EC1015:01", "rt1015-aif")));
+SND_SOC_DAILINK_DEF(cros_ec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("GOOG0013:00", "EC Codec I2S RX")));
+
+SND_SOC_DAILINK_DEF(platform,
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("acp3x_rv_i2s_dma.0")));
+
+static struct snd_soc_codec_conf rt1015_conf[] = {
+	{
+		.dlc = COMP_CODEC_CONF("i2c-10EC1015:00"),
+		.name_prefix = "Left",
+	},
+	{
+		.dlc = COMP_CODEC_CONF("i2c-10EC1015:01"),
+		.name_prefix = "Right",
+	},
+};
+
+static struct snd_soc_dai_link acp3x_dai[] = {
+	[RT5682] = {
+		.name = "acp3x-5682-play",
+		.stream_name = "Playback",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBP_CFP,
+		.init = acp3x_5682_init,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &acp3x_5682_ops,
+		SND_SOC_DAILINK_REG(acp3x_i2s, rt5682, platform),
+	},
+	[MAX] = {
+		.name = "acp3x-max98357-play",
+		.stream_name = "HiFi Playback",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBC_CFC,
+		.dpcm_playback = 1,
+		.ops = &acp3x_max_play_ops,
+		.cpus = acp3x_bt,
+		.num_cpus = ARRAY_SIZE(acp3x_bt),
+		.platforms = platform,
+		.num_platforms = ARRAY_SIZE(platform),
+	},
+	[EC] = {
+		.name = "acp3x-ec-dmic0-capture",
+		.stream_name = "Capture DMIC0",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBC_CFC,
+		.dpcm_capture = 1,
+		.ops = &acp3x_ec_cap0_ops,
+		SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform),
+	},
+};
+
+static const char * const dmic_mux_text[] = {
+	"Front Mic",
+	"Rear Mic",
+};
+
+static SOC_ENUM_SINGLE_DECL(
+		acp3x_dmic_enum, SND_SOC_NOPM, 0, dmic_mux_text);
+
+static const struct snd_kcontrol_new acp3x_dmic_mux_control =
+	SOC_DAPM_ENUM_EXT("DMIC Select Mux", acp3x_dmic_enum,
+			  dmic_get, dmic_set);
+
+static const struct snd_soc_dapm_widget acp3x_5682_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_SPK("Spk", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MUX("Dmic Mux", SND_SOC_NOPM, 0, 0,
+			 &acp3x_dmic_mux_control),
+};
+
+static const struct snd_soc_dapm_route acp3x_5682_audio_route[] = {
+	{"Headphone Jack", NULL, "HPOL"},
+	{"Headphone Jack", NULL, "HPOR"},
+	{"IN1P", NULL, "Headset Mic"},
+	{"Spk", NULL, "Speaker"},
+	{"Dmic Mux", "Front Mic", "DMIC"},
+	{"Dmic Mux", "Rear Mic", "DMIC"},
+};
+
+static const struct snd_kcontrol_new acp3x_5682_mc_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Spk"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+static struct snd_soc_card acp3x_5682 = {
+	.name = "acp3xalc5682m98357",
+	.owner = THIS_MODULE,
+	.dai_link = acp3x_dai,
+	.num_links = ARRAY_SIZE(acp3x_dai),
+	.dapm_widgets = acp3x_5682_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(acp3x_5682_widgets),
+	.dapm_routes = acp3x_5682_audio_route,
+	.num_dapm_routes = ARRAY_SIZE(acp3x_5682_audio_route),
+	.controls = acp3x_5682_mc_controls,
+	.num_controls = ARRAY_SIZE(acp3x_5682_mc_controls),
+};
+
+static const struct snd_soc_dapm_widget acp3x_1015_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MUX("Dmic Mux", SND_SOC_NOPM, 0, 0,
+			 &acp3x_dmic_mux_control),
+	SND_SOC_DAPM_SPK("Left Spk", NULL),
+	SND_SOC_DAPM_SPK("Right Spk", NULL),
+};
+
+static const struct snd_soc_dapm_route acp3x_1015_route[] = {
+	{"Headphone Jack", NULL, "HPOL"},
+	{"Headphone Jack", NULL, "HPOR"},
+	{"IN1P", NULL, "Headset Mic"},
+	{"Dmic Mux", "Front Mic", "DMIC"},
+	{"Dmic Mux", "Rear Mic", "DMIC"},
+	{"Left Spk", NULL, "Left SPO"},
+	{"Right Spk", NULL, "Right SPO"},
+};
+
+static const struct snd_kcontrol_new acp3x_mc_1015_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Left Spk"),
+	SOC_DAPM_PIN_SWITCH("Right Spk"),
+};
+
+static struct snd_soc_card acp3x_1015 = {
+	.name = "acp3xalc56821015",
+	.owner = THIS_MODULE,
+	.dai_link = acp3x_dai,
+	.num_links = ARRAY_SIZE(acp3x_dai),
+	.dapm_widgets = acp3x_1015_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(acp3x_1015_widgets),
+	.dapm_routes = acp3x_1015_route,
+	.num_dapm_routes = ARRAY_SIZE(acp3x_1015_route),
+	.codec_conf = rt1015_conf,
+	.num_configs = ARRAY_SIZE(rt1015_conf),
+	.controls = acp3x_mc_1015_controls,
+	.num_controls = ARRAY_SIZE(acp3x_mc_1015_controls),
+};
+
+static const struct snd_soc_dapm_widget acp3x_1015p_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MUX("Dmic Mux", SND_SOC_NOPM, 0, 0,
+			 &acp3x_dmic_mux_control),
+	SND_SOC_DAPM_SPK("Speakers", NULL),
+};
+
+static const struct snd_soc_dapm_route acp3x_1015p_route[] = {
+	{"Headphone Jack", NULL, "HPOL"},
+	{"Headphone Jack", NULL, "HPOR"},
+	{"IN1P", NULL, "Headset Mic"},
+	{"Dmic Mux", "Front Mic", "DMIC"},
+	{"Dmic Mux", "Rear Mic", "DMIC"},
+	/* speaker */
+	{ "Speakers", NULL, "Speaker" },
+};
+
+static const struct snd_kcontrol_new acp3x_mc_1015p_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Speakers"),
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+static struct snd_soc_card acp3x_1015p = {
+	.name = "acp3xalc56821015p",
+	.owner = THIS_MODULE,
+	.dai_link = acp3x_dai,
+	.num_links = ARRAY_SIZE(acp3x_dai),
+	.dapm_widgets = acp3x_1015p_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(acp3x_1015p_widgets),
+	.dapm_routes = acp3x_1015p_route,
+	.num_dapm_routes = ARRAY_SIZE(acp3x_1015p_route),
+	.controls = acp3x_mc_1015p_controls,
+	.num_controls = ARRAY_SIZE(acp3x_mc_1015p_controls),
+};
+
+void *soc_is_rltk_max(struct device *dev)
+{
+	const struct acpi_device_id *match;
+
+	match = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!match)
+		return NULL;
+	return (void *)match->driver_data;
+}
+
+static void card_spk_dai_link_present(struct snd_soc_dai_link *links,
+						const char *card_name)
+{
+	if (!strcmp(card_name, "acp3xalc56821015")) {
+		links[1].codecs = rt1015;
+		links[1].num_codecs = ARRAY_SIZE(rt1015);
+	} else if (!strcmp(card_name, "acp3xalc56821015p")) {
+		links[1].codecs = rt1015p;
+		links[1].num_codecs = ARRAY_SIZE(rt1015p);
+	} else {
+		links[1].codecs = max;
+		links[1].num_codecs = ARRAY_SIZE(max);
+	}
+}
+
+static int acp3x_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct snd_soc_card *card;
+	struct acp3x_platform_info *machine;
+	struct device *dev = &pdev->dev;
+
+	card = (struct snd_soc_card *)soc_is_rltk_max(dev);
+	if (!card)
+		return -ENODEV;
+
+	machine = devm_kzalloc(&pdev->dev, sizeof(*machine), GFP_KERNEL);
+	if (!machine)
+		return -ENOMEM;
+
+	card_spk_dai_link_present(card->dai_link, card->name);
+	card->dev = &pdev->dev;
+	platform_set_drvdata(pdev, card);
+	snd_soc_card_set_drvdata(card, machine);
+
+	dmic_sel = devm_gpiod_get(&pdev->dev, "dmic", GPIOD_OUT_LOW);
+	if (IS_ERR(dmic_sel)) {
+		dev_err(&pdev->dev, "DMIC gpio failed err=%ld\n",
+			PTR_ERR(dmic_sel));
+		return PTR_ERR(dmic_sel);
+	}
+
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
+	if (ret) {
+		return dev_err_probe(&pdev->dev, ret,
+				"devm_snd_soc_register_card(%s) failed\n",
+				card->name);
+	}
+	return 0;
+}
+
+static const struct acpi_device_id acp3x_audio_acpi_match[] = {
+	{ "AMDI5682", (unsigned long)&acp3x_5682},
+	{ "AMDI1015", (unsigned long)&acp3x_1015},
+	{ "10021015", (unsigned long)&acp3x_1015p},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, acp3x_audio_acpi_match);
+
+static struct platform_driver acp3x_audio = {
+	.driver = {
+		.name = "acp3x-alc5682-max98357",
+		.acpi_match_table = ACPI_PTR(acp3x_audio_acpi_match),
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = acp3x_probe,
+};
+
+module_platform_driver(acp3x_audio);
+
+MODULE_AUTHOR("akshu.agrawal@amd.com");
+MODULE_AUTHOR("Vishnuvardhanrao.Ravulapati@amd.com");
+MODULE_AUTHOR("Vijendar.Mukunda@amd.com");
+MODULE_DESCRIPTION("ALC5682 ALC1015, ALC1015P & MAX98357 audio support");
+MODULE_LICENSE("GPL v2");