Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1132 insertions, 0 deletions

diff --git a/sound/soc/codecs/cs53l30.c b/sound/soc/codecs/cs53l30.c
new file mode 100644
index 000000000..69db0013d
--- /dev/null
+++ b/sound/soc/codecs/cs53l30.c
@@ -0,0 +1,1132 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cs53l30.c  --  CS53l30 ALSA Soc Audio driver
+ *
+ * Copyright 2015 Cirrus Logic, Inc.
+ *
+ * Authors: Paul Handrigan <Paul.Handrigan@cirrus.com>,
+ *          Tim Howe <Tim.Howe@cirrus.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#include "cs53l30.h"
+#include "cirrus_legacy.h"
+
+#define CS53L30_NUM_SUPPLIES 2
+static const char *const cs53l30_supply_names[CS53L30_NUM_SUPPLIES] = {
+	"VA",
+	"VP",
+};
+
+struct cs53l30_private {
+	struct regulator_bulk_data	supplies[CS53L30_NUM_SUPPLIES];
+	struct regmap			*regmap;
+	struct gpio_desc		*reset_gpio;
+	struct gpio_desc		*mute_gpio;
+	struct clk			*mclk;
+	bool				use_sdout2;
+	u32				mclk_rate;
+};
+
+static const struct reg_default cs53l30_reg_defaults[] = {
+	{ CS53L30_PWRCTL,		CS53L30_PWRCTL_DEFAULT },
+	{ CS53L30_MCLKCTL,		CS53L30_MCLKCTL_DEFAULT },
+	{ CS53L30_INT_SR_CTL,		CS53L30_INT_SR_CTL_DEFAULT },
+	{ CS53L30_MICBIAS_CTL,		CS53L30_MICBIAS_CTL_DEFAULT },
+	{ CS53L30_ASPCFG_CTL,		CS53L30_ASPCFG_CTL_DEFAULT },
+	{ CS53L30_ASP_CTL1,		CS53L30_ASP_CTL1_DEFAULT },
+	{ CS53L30_ASP_TDMTX_CTL1,	CS53L30_ASP_TDMTX_CTLx_DEFAULT },
+	{ CS53L30_ASP_TDMTX_CTL2,	CS53L30_ASP_TDMTX_CTLx_DEFAULT },
+	{ CS53L30_ASP_TDMTX_CTL3,	CS53L30_ASP_TDMTX_CTLx_DEFAULT },
+	{ CS53L30_ASP_TDMTX_CTL4,	CS53L30_ASP_TDMTX_CTLx_DEFAULT },
+	{ CS53L30_ASP_TDMTX_EN1,	CS53L30_ASP_TDMTX_ENx_DEFAULT },
+	{ CS53L30_ASP_TDMTX_EN2,	CS53L30_ASP_TDMTX_ENx_DEFAULT },
+	{ CS53L30_ASP_TDMTX_EN3,	CS53L30_ASP_TDMTX_ENx_DEFAULT },
+	{ CS53L30_ASP_TDMTX_EN4,	CS53L30_ASP_TDMTX_ENx_DEFAULT },
+	{ CS53L30_ASP_TDMTX_EN5,	CS53L30_ASP_TDMTX_ENx_DEFAULT },
+	{ CS53L30_ASP_TDMTX_EN6,	CS53L30_ASP_TDMTX_ENx_DEFAULT },
+	{ CS53L30_ASP_CTL2,		CS53L30_ASP_CTL2_DEFAULT },
+	{ CS53L30_SFT_RAMP,		CS53L30_SFT_RMP_DEFAULT },
+	{ CS53L30_LRCK_CTL1,		CS53L30_LRCK_CTLx_DEFAULT },
+	{ CS53L30_LRCK_CTL2,		CS53L30_LRCK_CTLx_DEFAULT },
+	{ CS53L30_MUTEP_CTL1,		CS53L30_MUTEP_CTL1_DEFAULT },
+	{ CS53L30_MUTEP_CTL2,		CS53L30_MUTEP_CTL2_DEFAULT },
+	{ CS53L30_INBIAS_CTL1,		CS53L30_INBIAS_CTL1_DEFAULT },
+	{ CS53L30_INBIAS_CTL2,		CS53L30_INBIAS_CTL2_DEFAULT },
+	{ CS53L30_DMIC1_STR_CTL,	CS53L30_DMIC1_STR_CTL_DEFAULT },
+	{ CS53L30_DMIC2_STR_CTL,	CS53L30_DMIC2_STR_CTL_DEFAULT },
+	{ CS53L30_ADCDMIC1_CTL1,	CS53L30_ADCDMICx_CTL1_DEFAULT },
+	{ CS53L30_ADCDMIC1_CTL2,	CS53L30_ADCDMIC1_CTL2_DEFAULT },
+	{ CS53L30_ADC1_CTL3,		CS53L30_ADCx_CTL3_DEFAULT },
+	{ CS53L30_ADC1_NG_CTL,		CS53L30_ADCx_NG_CTL_DEFAULT },
+	{ CS53L30_ADC1A_AFE_CTL,	CS53L30_ADCxy_AFE_CTL_DEFAULT },
+	{ CS53L30_ADC1B_AFE_CTL,	CS53L30_ADCxy_AFE_CTL_DEFAULT },
+	{ CS53L30_ADC1A_DIG_VOL,	CS53L30_ADCxy_DIG_VOL_DEFAULT },
+	{ CS53L30_ADC1B_DIG_VOL,	CS53L30_ADCxy_DIG_VOL_DEFAULT },
+	{ CS53L30_ADCDMIC2_CTL1,	CS53L30_ADCDMICx_CTL1_DEFAULT },
+	{ CS53L30_ADCDMIC2_CTL2,	CS53L30_ADCDMIC1_CTL2_DEFAULT },
+	{ CS53L30_ADC2_CTL3,		CS53L30_ADCx_CTL3_DEFAULT },
+	{ CS53L30_ADC2_NG_CTL,		CS53L30_ADCx_NG_CTL_DEFAULT },
+	{ CS53L30_ADC2A_AFE_CTL,	CS53L30_ADCxy_AFE_CTL_DEFAULT },
+	{ CS53L30_ADC2B_AFE_CTL,	CS53L30_ADCxy_AFE_CTL_DEFAULT },
+	{ CS53L30_ADC2A_DIG_VOL,	CS53L30_ADCxy_DIG_VOL_DEFAULT },
+	{ CS53L30_ADC2B_DIG_VOL,	CS53L30_ADCxy_DIG_VOL_DEFAULT },
+	{ CS53L30_INT_MASK,		CS53L30_DEVICE_INT_MASK },
+};
+
+static bool cs53l30_volatile_register(struct device *dev, unsigned int reg)
+{
+	if (reg == CS53L30_IS)
+		return true;
+	else
+		return false;
+}
+
+static bool cs53l30_writeable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CS53L30_DEVID_AB:
+	case CS53L30_DEVID_CD:
+	case CS53L30_DEVID_E:
+	case CS53L30_REVID:
+	case CS53L30_IS:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static bool cs53l30_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CS53L30_DEVID_AB:
+	case CS53L30_DEVID_CD:
+	case CS53L30_DEVID_E:
+	case CS53L30_REVID:
+	case CS53L30_PWRCTL:
+	case CS53L30_MCLKCTL:
+	case CS53L30_INT_SR_CTL:
+	case CS53L30_MICBIAS_CTL:
+	case CS53L30_ASPCFG_CTL:
+	case CS53L30_ASP_CTL1:
+	case CS53L30_ASP_TDMTX_CTL1:
+	case CS53L30_ASP_TDMTX_CTL2:
+	case CS53L30_ASP_TDMTX_CTL3:
+	case CS53L30_ASP_TDMTX_CTL4:
+	case CS53L30_ASP_TDMTX_EN1:
+	case CS53L30_ASP_TDMTX_EN2:
+	case CS53L30_ASP_TDMTX_EN3:
+	case CS53L30_ASP_TDMTX_EN4:
+	case CS53L30_ASP_TDMTX_EN5:
+	case CS53L30_ASP_TDMTX_EN6:
+	case CS53L30_ASP_CTL2:
+	case CS53L30_SFT_RAMP:
+	case CS53L30_LRCK_CTL1:
+	case CS53L30_LRCK_CTL2:
+	case CS53L30_MUTEP_CTL1:
+	case CS53L30_MUTEP_CTL2:
+	case CS53L30_INBIAS_CTL1:
+	case CS53L30_INBIAS_CTL2:
+	case CS53L30_DMIC1_STR_CTL:
+	case CS53L30_DMIC2_STR_CTL:
+	case CS53L30_ADCDMIC1_CTL1:
+	case CS53L30_ADCDMIC1_CTL2:
+	case CS53L30_ADC1_CTL3:
+	case CS53L30_ADC1_NG_CTL:
+	case CS53L30_ADC1A_AFE_CTL:
+	case CS53L30_ADC1B_AFE_CTL:
+	case CS53L30_ADC1A_DIG_VOL:
+	case CS53L30_ADC1B_DIG_VOL:
+	case CS53L30_ADCDMIC2_CTL1:
+	case CS53L30_ADCDMIC2_CTL2:
+	case CS53L30_ADC2_CTL3:
+	case CS53L30_ADC2_NG_CTL:
+	case CS53L30_ADC2A_AFE_CTL:
+	case CS53L30_ADC2B_AFE_CTL:
+	case CS53L30_ADC2A_DIG_VOL:
+	case CS53L30_ADC2B_DIG_VOL:
+	case CS53L30_INT_MASK:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static DECLARE_TLV_DB_SCALE(adc_boost_tlv, 0, 2000, 0);
+static DECLARE_TLV_DB_SCALE(adc_ng_boost_tlv, 0, 3000, 0);
+static DECLARE_TLV_DB_SCALE(pga_tlv, -600, 50, 0);
+static DECLARE_TLV_DB_SCALE(dig_tlv, -9600, 100, 1);
+static DECLARE_TLV_DB_SCALE(pga_preamp_tlv, 0, 10000, 0);
+
+static const char * const input1_sel_text[] = {
+	"DMIC1 On AB In",
+	"DMIC1 On A In",
+	"DMIC1 On B In",
+	"ADC1 On AB In",
+	"ADC1 On A In",
+	"ADC1 On B In",
+	"DMIC1 Off ADC1 Off",
+};
+
+static unsigned int const input1_sel_values[] = {
+	CS53L30_CH_TYPE,
+	CS53L30_ADCxB_PDN | CS53L30_CH_TYPE,
+	CS53L30_ADCxA_PDN | CS53L30_CH_TYPE,
+	CS53L30_DMICx_PDN,
+	CS53L30_ADCxB_PDN | CS53L30_DMICx_PDN,
+	CS53L30_ADCxA_PDN | CS53L30_DMICx_PDN,
+	CS53L30_ADCxA_PDN | CS53L30_ADCxB_PDN | CS53L30_DMICx_PDN,
+};
+
+static const char * const input2_sel_text[] = {
+	"DMIC2 On AB In",
+	"DMIC2 On A In",
+	"DMIC2 On B In",
+	"ADC2 On AB In",
+	"ADC2 On A In",
+	"ADC2 On B In",
+	"DMIC2 Off ADC2 Off",
+};
+
+static unsigned int const input2_sel_values[] = {
+	0x0,
+	CS53L30_ADCxB_PDN,
+	CS53L30_ADCxA_PDN,
+	CS53L30_DMICx_PDN,
+	CS53L30_ADCxB_PDN | CS53L30_DMICx_PDN,
+	CS53L30_ADCxA_PDN | CS53L30_DMICx_PDN,
+	CS53L30_ADCxA_PDN | CS53L30_ADCxB_PDN | CS53L30_DMICx_PDN,
+};
+
+static const char * const input1_route_sel_text[] = {
+	"ADC1_SEL", "DMIC1_SEL",
+};
+
+static const struct soc_enum input1_route_sel_enum =
+	SOC_ENUM_SINGLE(CS53L30_ADCDMIC1_CTL1, CS53L30_CH_TYPE_SHIFT,
+			ARRAY_SIZE(input1_route_sel_text),
+			input1_route_sel_text);
+
+static SOC_VALUE_ENUM_SINGLE_DECL(input1_sel_enum, CS53L30_ADCDMIC1_CTL1, 0,
+				  CS53L30_ADCDMICx_PDN_MASK, input1_sel_text,
+				  input1_sel_values);
+
+static const struct snd_kcontrol_new input1_route_sel_mux =
+	SOC_DAPM_ENUM("Input 1 Route", input1_route_sel_enum);
+
+static const char * const input2_route_sel_text[] = {
+	"ADC2_SEL", "DMIC2_SEL",
+};
+
+/* Note: CS53L30_ADCDMIC1_CTL1 CH_TYPE controls inputs 1 and 2 */
+static const struct soc_enum input2_route_sel_enum =
+	SOC_ENUM_SINGLE(CS53L30_ADCDMIC1_CTL1, 0,
+			ARRAY_SIZE(input2_route_sel_text),
+			input2_route_sel_text);
+
+static SOC_VALUE_ENUM_SINGLE_DECL(input2_sel_enum, CS53L30_ADCDMIC2_CTL1, 0,
+				  CS53L30_ADCDMICx_PDN_MASK, input2_sel_text,
+				  input2_sel_values);
+
+static const struct snd_kcontrol_new input2_route_sel_mux =
+	SOC_DAPM_ENUM("Input 2 Route", input2_route_sel_enum);
+
+/*
+ * TB = 6144*(MCLK(int) scaling factor)/MCLK(internal)
+ * TB - Time base
+ * NOTE: If MCLK_INT_SCALE = 0, then TB=1
+ */
+static const char * const cs53l30_ng_delay_text[] = {
+	"TB*50ms", "TB*100ms", "TB*150ms", "TB*200ms",
+};
+
+static const struct soc_enum adc1_ng_delay_enum =
+	SOC_ENUM_SINGLE(CS53L30_ADC1_NG_CTL, CS53L30_ADCx_NG_DELAY_SHIFT,
+			ARRAY_SIZE(cs53l30_ng_delay_text),
+			cs53l30_ng_delay_text);
+
+static const struct soc_enum adc2_ng_delay_enum =
+	SOC_ENUM_SINGLE(CS53L30_ADC2_NG_CTL, CS53L30_ADCx_NG_DELAY_SHIFT,
+			ARRAY_SIZE(cs53l30_ng_delay_text),
+			cs53l30_ng_delay_text);
+
+/* The noise gate threshold selected will depend on NG Boost */
+static const char * const cs53l30_ng_thres_text[] = {
+	"-64dB/-34dB", "-66dB/-36dB", "-70dB/-40dB", "-73dB/-43dB",
+	"-76dB/-46dB", "-82dB/-52dB", "-58dB", "-64dB",
+};
+
+static const struct soc_enum adc1_ng_thres_enum =
+	SOC_ENUM_SINGLE(CS53L30_ADC1_NG_CTL, CS53L30_ADCx_NG_THRESH_SHIFT,
+			ARRAY_SIZE(cs53l30_ng_thres_text),
+			cs53l30_ng_thres_text);
+
+static const struct soc_enum adc2_ng_thres_enum =
+	SOC_ENUM_SINGLE(CS53L30_ADC2_NG_CTL, CS53L30_ADCx_NG_THRESH_SHIFT,
+			ARRAY_SIZE(cs53l30_ng_thres_text),
+			cs53l30_ng_thres_text);
+
+/* Corner frequencies are with an Fs of 48kHz. */
+static const char * const hpf_corner_freq_text[] = {
+	"1.86Hz", "120Hz", "235Hz", "466Hz",
+};
+
+static const struct soc_enum adc1_hpf_enum =
+	SOC_ENUM_SINGLE(CS53L30_ADC1_CTL3, CS53L30_ADCx_HPF_CF_SHIFT,
+			ARRAY_SIZE(hpf_corner_freq_text), hpf_corner_freq_text);
+
+static const struct soc_enum adc2_hpf_enum =
+	SOC_ENUM_SINGLE(CS53L30_ADC2_CTL3, CS53L30_ADCx_HPF_CF_SHIFT,
+			ARRAY_SIZE(hpf_corner_freq_text), hpf_corner_freq_text);
+
+static const struct snd_kcontrol_new cs53l30_snd_controls[] = {
+	SOC_SINGLE("Digital Soft-Ramp Switch", CS53L30_SFT_RAMP,
+		   CS53L30_DIGSFT_SHIFT, 1, 0),
+	SOC_SINGLE("ADC1 Noise Gate Ganging Switch", CS53L30_ADC1_CTL3,
+		   CS53L30_ADCx_NG_ALL_SHIFT, 1, 0),
+	SOC_SINGLE("ADC2 Noise Gate Ganging Switch", CS53L30_ADC2_CTL3,
+		   CS53L30_ADCx_NG_ALL_SHIFT, 1, 0),
+	SOC_SINGLE("ADC1A Noise Gate Enable Switch", CS53L30_ADC1_NG_CTL,
+		   CS53L30_ADCxA_NG_SHIFT, 1, 0),
+	SOC_SINGLE("ADC1B Noise Gate Enable Switch", CS53L30_ADC1_NG_CTL,
+		   CS53L30_ADCxB_NG_SHIFT, 1, 0),
+	SOC_SINGLE("ADC2A Noise Gate Enable Switch", CS53L30_ADC2_NG_CTL,
+		   CS53L30_ADCxA_NG_SHIFT, 1, 0),
+	SOC_SINGLE("ADC2B Noise Gate Enable Switch", CS53L30_ADC2_NG_CTL,
+		   CS53L30_ADCxB_NG_SHIFT, 1, 0),
+	SOC_SINGLE("ADC1 Notch Filter Switch", CS53L30_ADCDMIC1_CTL2,
+		   CS53L30_ADCx_NOTCH_DIS_SHIFT, 1, 1),
+	SOC_SINGLE("ADC2 Notch Filter Switch", CS53L30_ADCDMIC2_CTL2,
+		   CS53L30_ADCx_NOTCH_DIS_SHIFT, 1, 1),
+	SOC_SINGLE("ADC1A Invert Switch", CS53L30_ADCDMIC1_CTL2,
+		   CS53L30_ADCxA_INV_SHIFT, 1, 0),
+	SOC_SINGLE("ADC1B Invert Switch", CS53L30_ADCDMIC1_CTL2,
+		   CS53L30_ADCxB_INV_SHIFT, 1, 0),
+	SOC_SINGLE("ADC2A Invert Switch", CS53L30_ADCDMIC2_CTL2,
+		   CS53L30_ADCxA_INV_SHIFT, 1, 0),
+	SOC_SINGLE("ADC2B Invert Switch", CS53L30_ADCDMIC2_CTL2,
+		   CS53L30_ADCxB_INV_SHIFT, 1, 0),
+
+	SOC_SINGLE_TLV("ADC1A Digital Boost Volume", CS53L30_ADCDMIC1_CTL2,
+		       CS53L30_ADCxA_DIG_BOOST_SHIFT, 1, 0, adc_boost_tlv),
+	SOC_SINGLE_TLV("ADC1B Digital Boost Volume", CS53L30_ADCDMIC1_CTL2,
+		       CS53L30_ADCxB_DIG_BOOST_SHIFT, 1, 0, adc_boost_tlv),
+	SOC_SINGLE_TLV("ADC2A Digital Boost Volume", CS53L30_ADCDMIC2_CTL2,
+		       CS53L30_ADCxA_DIG_BOOST_SHIFT, 1, 0, adc_boost_tlv),
+	SOC_SINGLE_TLV("ADC2B Digital Boost Volume", CS53L30_ADCDMIC2_CTL2,
+		       CS53L30_ADCxB_DIG_BOOST_SHIFT, 1, 0, adc_boost_tlv),
+	SOC_SINGLE_TLV("ADC1 NG Boost Volume", CS53L30_ADC1_NG_CTL,
+		       CS53L30_ADCx_NG_BOOST_SHIFT, 1, 0, adc_ng_boost_tlv),
+	SOC_SINGLE_TLV("ADC2 NG Boost Volume", CS53L30_ADC2_NG_CTL,
+		       CS53L30_ADCx_NG_BOOST_SHIFT, 1, 0, adc_ng_boost_tlv),
+
+	SOC_DOUBLE_R_TLV("ADC1 Preamplifier Volume", CS53L30_ADC1A_AFE_CTL,
+			 CS53L30_ADC1B_AFE_CTL, CS53L30_ADCxy_PREAMP_SHIFT,
+			 2, 0, pga_preamp_tlv),
+	SOC_DOUBLE_R_TLV("ADC2 Preamplifier Volume", CS53L30_ADC2A_AFE_CTL,
+			 CS53L30_ADC2B_AFE_CTL, CS53L30_ADCxy_PREAMP_SHIFT,
+			 2, 0, pga_preamp_tlv),
+
+	SOC_ENUM("Input 1 Channel Select", input1_sel_enum),
+	SOC_ENUM("Input 2 Channel Select", input2_sel_enum),
+
+	SOC_ENUM("ADC1 HPF Select", adc1_hpf_enum),
+	SOC_ENUM("ADC2 HPF Select", adc2_hpf_enum),
+	SOC_ENUM("ADC1 NG Threshold", adc1_ng_thres_enum),
+	SOC_ENUM("ADC2 NG Threshold", adc2_ng_thres_enum),
+	SOC_ENUM("ADC1 NG Delay", adc1_ng_delay_enum),
+	SOC_ENUM("ADC2 NG Delay", adc2_ng_delay_enum),
+
+	SOC_SINGLE_SX_TLV("ADC1A PGA Volume",
+		    CS53L30_ADC1A_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
+	SOC_SINGLE_SX_TLV("ADC1B PGA Volume",
+		    CS53L30_ADC1B_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
+	SOC_SINGLE_SX_TLV("ADC2A PGA Volume",
+		    CS53L30_ADC2A_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
+	SOC_SINGLE_SX_TLV("ADC2B PGA Volume",
+		    CS53L30_ADC2B_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
+
+	SOC_SINGLE_SX_TLV("ADC1A Digital Volume",
+		    CS53L30_ADC1A_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
+	SOC_SINGLE_SX_TLV("ADC1B Digital Volume",
+		    CS53L30_ADC1B_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
+	SOC_SINGLE_SX_TLV("ADC2A Digital Volume",
+		    CS53L30_ADC2A_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
+	SOC_SINGLE_SX_TLV("ADC2B Digital Volume",
+		    CS53L30_ADC2B_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
+};
+
+static const struct snd_soc_dapm_widget cs53l30_dapm_widgets[] = {
+	SND_SOC_DAPM_INPUT("IN1_DMIC1"),
+	SND_SOC_DAPM_INPUT("IN2"),
+	SND_SOC_DAPM_INPUT("IN3_DMIC2"),
+	SND_SOC_DAPM_INPUT("IN4"),
+	SND_SOC_DAPM_SUPPLY("MIC1 Bias", CS53L30_MICBIAS_CTL,
+			    CS53L30_MIC1_BIAS_PDN_SHIFT, 1, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("MIC2 Bias", CS53L30_MICBIAS_CTL,
+			    CS53L30_MIC2_BIAS_PDN_SHIFT, 1, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("MIC3 Bias", CS53L30_MICBIAS_CTL,
+			    CS53L30_MIC3_BIAS_PDN_SHIFT, 1, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("MIC4 Bias", CS53L30_MICBIAS_CTL,
+			    CS53L30_MIC4_BIAS_PDN_SHIFT, 1, NULL, 0),
+
+	SND_SOC_DAPM_AIF_OUT("ASP_SDOUT1", NULL, 0, CS53L30_ASP_CTL1,
+			     CS53L30_ASP_SDOUTx_PDN_SHIFT, 1),
+	SND_SOC_DAPM_AIF_OUT("ASP_SDOUT2", NULL, 0, CS53L30_ASP_CTL2,
+			     CS53L30_ASP_SDOUTx_PDN_SHIFT, 1),
+
+	SND_SOC_DAPM_MUX("Input Mux 1", SND_SOC_NOPM, 0, 0,
+			 &input1_route_sel_mux),
+	SND_SOC_DAPM_MUX("Input Mux 2", SND_SOC_NOPM, 0, 0,
+			 &input2_route_sel_mux),
+
+	SND_SOC_DAPM_ADC("ADC1A", NULL, CS53L30_ADCDMIC1_CTL1,
+			 CS53L30_ADCxA_PDN_SHIFT, 1),
+	SND_SOC_DAPM_ADC("ADC1B", NULL, CS53L30_ADCDMIC1_CTL1,
+			 CS53L30_ADCxB_PDN_SHIFT, 1),
+	SND_SOC_DAPM_ADC("ADC2A", NULL, CS53L30_ADCDMIC2_CTL1,
+			 CS53L30_ADCxA_PDN_SHIFT, 1),
+	SND_SOC_DAPM_ADC("ADC2B", NULL, CS53L30_ADCDMIC2_CTL1,
+			 CS53L30_ADCxB_PDN_SHIFT, 1),
+	SND_SOC_DAPM_ADC("DMIC1", NULL, CS53L30_ADCDMIC1_CTL1,
+			 CS53L30_DMICx_PDN_SHIFT, 1),
+	SND_SOC_DAPM_ADC("DMIC2", NULL, CS53L30_ADCDMIC2_CTL1,
+			 CS53L30_DMICx_PDN_SHIFT, 1),
+};
+
+static const struct snd_soc_dapm_route cs53l30_dapm_routes[] = {
+	/* ADC Input Paths */
+	{"ADC1A", NULL, "IN1_DMIC1"},
+	{"Input Mux 1", "ADC1_SEL", "ADC1A"},
+	{"ADC1B", NULL, "IN2"},
+
+	{"ADC2A", NULL, "IN3_DMIC2"},
+	{"Input Mux 2", "ADC2_SEL", "ADC2A"},
+	{"ADC2B", NULL, "IN4"},
+
+	/* MIC Bias Paths */
+	{"ADC1A", NULL, "MIC1 Bias"},
+	{"ADC1B", NULL, "MIC2 Bias"},
+	{"ADC2A", NULL, "MIC3 Bias"},
+	{"ADC2B", NULL, "MIC4 Bias"},
+
+	/* DMIC Paths */
+	{"DMIC1", NULL, "IN1_DMIC1"},
+	{"Input Mux 1", "DMIC1_SEL", "DMIC1"},
+
+	{"DMIC2", NULL, "IN3_DMIC2"},
+	{"Input Mux 2", "DMIC2_SEL", "DMIC2"},
+};
+
+static const struct snd_soc_dapm_route cs53l30_dapm_routes_sdout1[] = {
+	/* Output Paths when using SDOUT1 only */
+	{"ASP_SDOUT1", NULL, "ADC1A" },
+	{"ASP_SDOUT1", NULL, "Input Mux 1"},
+	{"ASP_SDOUT1", NULL, "ADC1B"},
+
+	{"ASP_SDOUT1", NULL, "ADC2A"},
+	{"ASP_SDOUT1", NULL, "Input Mux 2"},
+	{"ASP_SDOUT1", NULL, "ADC2B"},
+
+	{"Capture", NULL, "ASP_SDOUT1"},
+};
+
+static const struct snd_soc_dapm_route cs53l30_dapm_routes_sdout2[] = {
+	/* Output Paths when using both SDOUT1 and SDOUT2 */
+	{"ASP_SDOUT1", NULL, "ADC1A" },
+	{"ASP_SDOUT1", NULL, "Input Mux 1"},
+	{"ASP_SDOUT1", NULL, "ADC1B"},
+
+	{"ASP_SDOUT2", NULL, "ADC2A"},
+	{"ASP_SDOUT2", NULL, "Input Mux 2"},
+	{"ASP_SDOUT2", NULL, "ADC2B"},
+
+	{"Capture", NULL, "ASP_SDOUT1"},
+	{"Capture", NULL, "ASP_SDOUT2"},
+};
+
+struct cs53l30_mclk_div {
+	u32 mclk_rate;
+	u32 srate;
+	u8 asp_rate;
+	u8 internal_fs_ratio;
+	u8 mclk_int_scale;
+};
+
+static const struct cs53l30_mclk_div cs53l30_mclk_coeffs[] = {
+	/* NOTE: Enable MCLK_INT_SCALE to save power. */
+
+	/* MCLK, Sample Rate, asp_rate, internal_fs_ratio, mclk_int_scale */
+	{5644800, 11025, 0x4, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{5644800, 22050, 0x8, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{5644800, 44100, 0xC, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+
+	{6000000,  8000, 0x1, 0, CS53L30_MCLK_INT_SCALE},
+	{6000000, 11025, 0x2, 0, CS53L30_MCLK_INT_SCALE},
+	{6000000, 12000, 0x4, 0, CS53L30_MCLK_INT_SCALE},
+	{6000000, 16000, 0x5, 0, CS53L30_MCLK_INT_SCALE},
+	{6000000, 22050, 0x6, 0, CS53L30_MCLK_INT_SCALE},
+	{6000000, 24000, 0x8, 0, CS53L30_MCLK_INT_SCALE},
+	{6000000, 32000, 0x9, 0, CS53L30_MCLK_INT_SCALE},
+	{6000000, 44100, 0xA, 0, CS53L30_MCLK_INT_SCALE},
+	{6000000, 48000, 0xC, 0, CS53L30_MCLK_INT_SCALE},
+
+	{6144000,  8000, 0x1, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6144000, 11025, 0x2, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6144000, 12000, 0x4, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6144000, 16000, 0x5, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6144000, 22050, 0x6, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6144000, 24000, 0x8, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6144000, 32000, 0x9, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6144000, 44100, 0xA, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6144000, 48000, 0xC, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+
+	{6400000,  8000, 0x1, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6400000, 11025, 0x2, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6400000, 12000, 0x4, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6400000, 16000, 0x5, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6400000, 22050, 0x6, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6400000, 24000, 0x8, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6400000, 32000, 0x9, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6400000, 44100, 0xA, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+	{6400000, 48000, 0xC, CS53L30_INTRNL_FS_RATIO, CS53L30_MCLK_INT_SCALE},
+};
+
+struct cs53l30_mclkx_div {
+	u32 mclkx;
+	u8 ratio;
+	u8 mclkdiv;
+};
+
+static const struct cs53l30_mclkx_div cs53l30_mclkx_coeffs[] = {
+	{5644800,  1, CS53L30_MCLK_DIV_BY_1},
+	{6000000,  1, CS53L30_MCLK_DIV_BY_1},
+	{6144000,  1, CS53L30_MCLK_DIV_BY_1},
+	{11289600, 2, CS53L30_MCLK_DIV_BY_2},
+	{12288000, 2, CS53L30_MCLK_DIV_BY_2},
+	{12000000, 2, CS53L30_MCLK_DIV_BY_2},
+	{19200000, 3, CS53L30_MCLK_DIV_BY_3},
+};
+
+static int cs53l30_get_mclkx_coeff(int mclkx)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cs53l30_mclkx_coeffs); i++) {
+		if (cs53l30_mclkx_coeffs[i].mclkx == mclkx)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int cs53l30_get_mclk_coeff(int mclk_rate, int srate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cs53l30_mclk_coeffs); i++) {
+		if (cs53l30_mclk_coeffs[i].mclk_rate == mclk_rate &&
+		    cs53l30_mclk_coeffs[i].srate == srate)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int cs53l30_set_sysclk(struct snd_soc_dai *dai,
+			      int clk_id, unsigned int freq, int dir)
+{
+	struct cs53l30_private *priv = snd_soc_component_get_drvdata(dai->component);
+	int mclkx_coeff;
+	u32 mclk_rate;
+
+	/* MCLKX -> MCLK */
+	mclkx_coeff = cs53l30_get_mclkx_coeff(freq);
+	if (mclkx_coeff < 0)
+		return mclkx_coeff;
+
+	mclk_rate = cs53l30_mclkx_coeffs[mclkx_coeff].mclkx /
+		    cs53l30_mclkx_coeffs[mclkx_coeff].ratio;
+
+	regmap_update_bits(priv->regmap, CS53L30_MCLKCTL,
+			   CS53L30_MCLK_DIV_MASK,
+			   cs53l30_mclkx_coeffs[mclkx_coeff].mclkdiv);
+
+	priv->mclk_rate = mclk_rate;
+
+	return 0;
+}
+
+static int cs53l30_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct cs53l30_private *priv = snd_soc_component_get_drvdata(dai->component);
+	u8 aspcfg = 0, aspctl1 = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		aspcfg |= CS53L30_ASP_MS;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* DAI mode */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		/* Set TDM_PDN to turn off TDM mode -- Reset default */
+		aspctl1 |= CS53L30_ASP_TDM_PDN;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		/*
+		 * Clear TDM_PDN to turn on TDM mode; Use ASP_SCLK_INV = 0
+		 * with SHIFT_LEFT = 1 combination as Figure 4-13 shows in
+		 * the CS53L30 datasheet
+		 */
+		aspctl1 |= CS53L30_SHIFT_LEFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Check to see if the SCLK is inverted */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_IB_NF:
+	case SND_SOC_DAIFMT_IB_IF:
+		aspcfg ^= CS53L30_ASP_SCLK_INV;
+		break;
+	default:
+		break;
+	}
+
+	regmap_update_bits(priv->regmap, CS53L30_ASPCFG_CTL,
+			   CS53L30_ASP_MS | CS53L30_ASP_SCLK_INV, aspcfg);
+
+	regmap_update_bits(priv->regmap, CS53L30_ASP_CTL1,
+			   CS53L30_ASP_TDM_PDN | CS53L30_SHIFT_LEFT, aspctl1);
+
+	return 0;
+}
+
+static int cs53l30_pcm_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	struct cs53l30_private *priv = snd_soc_component_get_drvdata(dai->component);
+	int srate = params_rate(params);
+	int mclk_coeff;
+
+	/* MCLK -> srate */
+	mclk_coeff = cs53l30_get_mclk_coeff(priv->mclk_rate, srate);
+	if (mclk_coeff < 0)
+		return -EINVAL;
+
+	regmap_update_bits(priv->regmap, CS53L30_INT_SR_CTL,
+			   CS53L30_INTRNL_FS_RATIO_MASK,
+			   cs53l30_mclk_coeffs[mclk_coeff].internal_fs_ratio);
+
+	regmap_update_bits(priv->regmap, CS53L30_MCLKCTL,
+			   CS53L30_MCLK_INT_SCALE_MASK,
+			   cs53l30_mclk_coeffs[mclk_coeff].mclk_int_scale);
+
+	regmap_update_bits(priv->regmap, CS53L30_ASPCFG_CTL,
+			   CS53L30_ASP_RATE_MASK,
+			   cs53l30_mclk_coeffs[mclk_coeff].asp_rate);
+
+	return 0;
+}
+
+static int cs53l30_set_bias_level(struct snd_soc_component *component,
+				  enum snd_soc_bias_level level)
+{
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
+	struct cs53l30_private *priv = snd_soc_component_get_drvdata(component);
+	unsigned int reg;
+	int i, inter_max_check, ret;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		if (dapm->bias_level == SND_SOC_BIAS_STANDBY)
+			regmap_update_bits(priv->regmap, CS53L30_PWRCTL,
+					   CS53L30_PDN_LP_MASK, 0);
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		if (dapm->bias_level == SND_SOC_BIAS_OFF) {
+			ret = clk_prepare_enable(priv->mclk);
+			if (ret) {
+				dev_err(component->dev,
+					"failed to enable MCLK: %d\n", ret);
+				return ret;
+			}
+			regmap_update_bits(priv->regmap, CS53L30_MCLKCTL,
+					   CS53L30_MCLK_DIS_MASK, 0);
+			regmap_update_bits(priv->regmap, CS53L30_PWRCTL,
+					   CS53L30_PDN_ULP_MASK, 0);
+			msleep(50);
+		} else {
+			regmap_update_bits(priv->regmap, CS53L30_PWRCTL,
+					   CS53L30_PDN_ULP_MASK,
+					   CS53L30_PDN_ULP);
+		}
+		break;
+	case SND_SOC_BIAS_OFF:
+		regmap_update_bits(priv->regmap, CS53L30_INT_MASK,
+				   CS53L30_PDN_DONE, 0);
+		/*
+		 * If digital softramp is set, the amount of time required
+		 * for power down increases and depends on the digital
+		 * volume setting.
+		 */
+
+		/* Set the max possible time if digsft is set */
+		regmap_read(priv->regmap, CS53L30_SFT_RAMP, &reg);
+		if (reg & CS53L30_DIGSFT_MASK)
+			inter_max_check = CS53L30_PDN_POLL_MAX;
+		else
+			inter_max_check = 10;
+
+		regmap_update_bits(priv->regmap, CS53L30_PWRCTL,
+				   CS53L30_PDN_ULP_MASK,
+				   CS53L30_PDN_ULP);
+		/* PDN_DONE will take a min of 20ms to be set.*/
+		msleep(20);
+		/* Clr status */
+		regmap_read(priv->regmap, CS53L30_IS, &reg);
+		for (i = 0; i < inter_max_check; i++) {
+			if (inter_max_check < 10) {
+				usleep_range(1000, 1100);
+				regmap_read(priv->regmap, CS53L30_IS, &reg);
+				if (reg & CS53L30_PDN_DONE)
+					break;
+			} else {
+				usleep_range(10000, 10100);
+				regmap_read(priv->regmap, CS53L30_IS, &reg);
+				if (reg & CS53L30_PDN_DONE)
+					break;
+			}
+		}
+		/* PDN_DONE is set. We now can disable the MCLK */
+		regmap_update_bits(priv->regmap, CS53L30_INT_MASK,
+				   CS53L30_PDN_DONE, CS53L30_PDN_DONE);
+		regmap_update_bits(priv->regmap, CS53L30_MCLKCTL,
+				   CS53L30_MCLK_DIS_MASK,
+				   CS53L30_MCLK_DIS);
+		clk_disable_unprepare(priv->mclk);
+		break;
+	}
+
+	return 0;
+}
+
+static int cs53l30_set_tristate(struct snd_soc_dai *dai, int tristate)
+{
+	struct cs53l30_private *priv = snd_soc_component_get_drvdata(dai->component);
+	u8 val = tristate ? CS53L30_ASP_3ST : 0;
+
+	return regmap_update_bits(priv->regmap, CS53L30_ASP_CTL1,
+				  CS53L30_ASP_3ST_MASK, val);
+}
+
+static unsigned int const cs53l30_src_rates[] = {
+	8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000
+};
+
+static const struct snd_pcm_hw_constraint_list src_constraints = {
+	.count = ARRAY_SIZE(cs53l30_src_rates),
+	.list = cs53l30_src_rates,
+};
+
+static int cs53l30_pcm_startup(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	snd_pcm_hw_constraint_list(substream->runtime, 0,
+				   SNDRV_PCM_HW_PARAM_RATE, &src_constraints);
+
+	return 0;
+}
+
+/*
+ * Note: CS53L30 counts the slot number per byte while ASoC counts the slot
+ * number per slot_width. So there is a difference between the slots of ASoC
+ * and the slots of CS53L30.
+ */
+static int cs53l30_set_dai_tdm_slot(struct snd_soc_dai *dai,
+				    unsigned int tx_mask, unsigned int rx_mask,
+				    int slots, int slot_width)
+{
+	struct cs53l30_private *priv = snd_soc_component_get_drvdata(dai->component);
+	unsigned int loc[CS53L30_TDM_SLOT_MAX] = {48, 48, 48, 48};
+	unsigned int slot_next, slot_step;
+	u64 tx_enable = 0;
+	int i;
+
+	if (!rx_mask) {
+		dev_err(dai->dev, "rx masks must not be 0\n");
+		return -EINVAL;
+	}
+
+	/* Assuming slot_width is not supposed to be greater than 64 */
+	if (slots <= 0 || slot_width <= 0 || slot_width > 64) {
+		dev_err(dai->dev, "invalid slot number or slot width\n");
+		return -EINVAL;
+	}
+
+	if (slot_width & 0x7) {
+		dev_err(dai->dev, "slot width must count in byte\n");
+		return -EINVAL;
+	}
+
+	/* How many bytes in each ASoC slot */
+	slot_step = slot_width >> 3;
+
+	for (i = 0; rx_mask && i < CS53L30_TDM_SLOT_MAX; i++) {
+		/* Find the first slot from LSB */
+		slot_next = __ffs(rx_mask);
+		/* Save the slot location by converting to CS53L30 slot */
+		loc[i] = slot_next * slot_step;
+		/* Create the mask of CS53L30 slot */
+		tx_enable |= (u64)((u64)(1 << slot_step) - 1) << (u64)loc[i];
+		/* Clear this slot from rx_mask */
+		rx_mask &= ~(1 << slot_next);
+	}
+
+	/* Error out to avoid slot shift */
+	if (rx_mask && i == CS53L30_TDM_SLOT_MAX) {
+		dev_err(dai->dev, "rx_mask exceeds max slot number: %d\n",
+			CS53L30_TDM_SLOT_MAX);
+		return -EINVAL;
+	}
+
+	/* Validate the last active CS53L30 slot */
+	slot_next = loc[i - 1] + slot_step - 1;
+	if (slot_next > 47) {
+		dev_err(dai->dev, "slot selection out of bounds: %u\n",
+			slot_next);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < CS53L30_TDM_SLOT_MAX && loc[i] != 48; i++) {
+		regmap_update_bits(priv->regmap, CS53L30_ASP_TDMTX_CTL(i),
+				   CS53L30_ASP_CHx_TX_LOC_MASK, loc[i]);
+		dev_dbg(dai->dev, "loc[%d]=%x\n", i, loc[i]);
+	}
+
+	for (i = 0; i < CS53L30_ASP_TDMTX_ENx_MAX && tx_enable; i++) {
+		regmap_write(priv->regmap, CS53L30_ASP_TDMTX_ENx(i),
+			     tx_enable & 0xff);
+		tx_enable >>= 8;
+		dev_dbg(dai->dev, "en_reg=%x, tx_enable=%llx\n",
+			CS53L30_ASP_TDMTX_ENx(i), tx_enable & 0xff);
+	}
+
+	return 0;
+}
+
+static int cs53l30_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
+{
+	struct cs53l30_private *priv = snd_soc_component_get_drvdata(dai->component);
+
+	gpiod_set_value_cansleep(priv->mute_gpio, mute);
+
+	return 0;
+}
+
+/* SNDRV_PCM_RATE_KNOT -> 12000, 24000 Hz, limit with constraint list */
+#define CS53L30_RATES (SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_KNOT)
+
+#define CS53L30_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+			SNDRV_PCM_FMTBIT_S24_LE)
+
+static const struct snd_soc_dai_ops cs53l30_ops = {
+	.startup = cs53l30_pcm_startup,
+	.hw_params = cs53l30_pcm_hw_params,
+	.set_fmt = cs53l30_set_dai_fmt,
+	.set_sysclk = cs53l30_set_sysclk,
+	.set_tristate = cs53l30_set_tristate,
+	.set_tdm_slot = cs53l30_set_dai_tdm_slot,
+	.mute_stream = cs53l30_mute_stream,
+};
+
+static struct snd_soc_dai_driver cs53l30_dai = {
+	.name = "cs53l30",
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 4,
+		.rates = CS53L30_RATES,
+		.formats = CS53L30_FORMATS,
+	},
+	.ops = &cs53l30_ops,
+	.symmetric_rate = 1,
+};
+
+static int cs53l30_component_probe(struct snd_soc_component *component)
+{
+	struct cs53l30_private *priv = snd_soc_component_get_drvdata(component);
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
+
+	if (priv->use_sdout2)
+		snd_soc_dapm_add_routes(dapm, cs53l30_dapm_routes_sdout2,
+					ARRAY_SIZE(cs53l30_dapm_routes_sdout2));
+	else
+		snd_soc_dapm_add_routes(dapm, cs53l30_dapm_routes_sdout1,
+					ARRAY_SIZE(cs53l30_dapm_routes_sdout1));
+
+	return 0;
+}
+
+static const struct snd_soc_component_driver cs53l30_driver = {
+	.probe			= cs53l30_component_probe,
+	.set_bias_level		= cs53l30_set_bias_level,
+	.controls		= cs53l30_snd_controls,
+	.num_controls		= ARRAY_SIZE(cs53l30_snd_controls),
+	.dapm_widgets		= cs53l30_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(cs53l30_dapm_widgets),
+	.dapm_routes		= cs53l30_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(cs53l30_dapm_routes),
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+};
+
+static struct regmap_config cs53l30_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = CS53L30_MAX_REGISTER,
+	.reg_defaults = cs53l30_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(cs53l30_reg_defaults),
+	.volatile_reg = cs53l30_volatile_register,
+	.writeable_reg = cs53l30_writeable_register,
+	.readable_reg = cs53l30_readable_register,
+	.cache_type = REGCACHE_RBTREE,
+
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static int cs53l30_i2c_probe(struct i2c_client *client)
+{
+	const struct device_node *np = client->dev.of_node;
+	struct device *dev = &client->dev;
+	struct cs53l30_private *cs53l30;
+	unsigned int reg;
+	int ret = 0, i, devid;
+	u8 val;
+
+	cs53l30 = devm_kzalloc(dev, sizeof(*cs53l30), GFP_KERNEL);
+	if (!cs53l30)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(cs53l30->supplies); i++)
+		cs53l30->supplies[i].supply = cs53l30_supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(cs53l30->supplies),
+				      cs53l30->supplies);
+	if (ret) {
+		dev_err(dev, "failed to get supplies: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(cs53l30->supplies),
+				    cs53l30->supplies);
+	if (ret) {
+		dev_err(dev, "failed to enable supplies: %d\n", ret);
+		return ret;
+	}
+
+	/* Reset the Device */
+	cs53l30->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						      GPIOD_OUT_LOW);
+	if (IS_ERR(cs53l30->reset_gpio)) {
+		ret = PTR_ERR(cs53l30->reset_gpio);
+		goto error_supplies;
+	}
+
+	gpiod_set_value_cansleep(cs53l30->reset_gpio, 1);
+
+	i2c_set_clientdata(client, cs53l30);
+
+	cs53l30->mclk_rate = 0;
+
+	cs53l30->regmap = devm_regmap_init_i2c(client, &cs53l30_regmap);
+	if (IS_ERR(cs53l30->regmap)) {
+		ret = PTR_ERR(cs53l30->regmap);
+		dev_err(dev, "regmap_init() failed: %d\n", ret);
+		goto error;
+	}
+
+	/* Initialize codec */
+	devid = cirrus_read_device_id(cs53l30->regmap, CS53L30_DEVID_AB);
+	if (devid < 0) {
+		ret = devid;
+		dev_err(dev, "Failed to read device ID: %d\n", ret);
+		goto error;
+	}
+
+	if (devid != CS53L30_DEVID) {
+		ret = -ENODEV;
+		dev_err(dev, "Device ID (%X). Expected %X\n",
+			devid, CS53L30_DEVID);
+		goto error;
+	}
+
+	ret = regmap_read(cs53l30->regmap, CS53L30_REVID, &reg);
+	if (ret < 0) {
+		dev_err(dev, "failed to get Revision ID: %d\n", ret);
+		goto error;
+	}
+
+	/* Check if MCLK provided */
+	cs53l30->mclk = devm_clk_get(dev, "mclk");
+	if (IS_ERR(cs53l30->mclk)) {
+		if (PTR_ERR(cs53l30->mclk) != -ENOENT) {
+			ret = PTR_ERR(cs53l30->mclk);
+			goto error;
+		}
+		/* Otherwise mark the mclk pointer to NULL */
+		cs53l30->mclk = NULL;
+	}
+
+	/* Fetch the MUTE control */
+	cs53l30->mute_gpio = devm_gpiod_get_optional(dev, "mute",
+						     GPIOD_OUT_HIGH);
+	if (IS_ERR(cs53l30->mute_gpio)) {
+		ret = PTR_ERR(cs53l30->mute_gpio);
+		goto error;
+	}
+
+	if (cs53l30->mute_gpio) {
+		/* Enable MUTE controls via MUTE pin */
+		regmap_write(cs53l30->regmap, CS53L30_MUTEP_CTL1,
+			     CS53L30_MUTEP_CTL1_MUTEALL);
+		/* Flip the polarity of MUTE pin */
+		if (gpiod_is_active_low(cs53l30->mute_gpio))
+			regmap_update_bits(cs53l30->regmap, CS53L30_MUTEP_CTL2,
+					   CS53L30_MUTE_PIN_POLARITY, 0);
+	}
+
+	if (!of_property_read_u8(np, "cirrus,micbias-lvl", &val))
+		regmap_update_bits(cs53l30->regmap, CS53L30_MICBIAS_CTL,
+				   CS53L30_MIC_BIAS_CTRL_MASK, val);
+
+	if (of_property_read_bool(np, "cirrus,use-sdout2"))
+		cs53l30->use_sdout2 = true;
+
+	dev_info(dev, "Cirrus Logic CS53L30, Revision: %02X\n", reg & 0xFF);
+
+	ret = devm_snd_soc_register_component(dev, &cs53l30_driver, &cs53l30_dai, 1);
+	if (ret) {
+		dev_err(dev, "failed to register component: %d\n", ret);
+		goto error;
+	}
+
+	return 0;
+
+error:
+	gpiod_set_value_cansleep(cs53l30->reset_gpio, 0);
+error_supplies:
+	regulator_bulk_disable(ARRAY_SIZE(cs53l30->supplies),
+			       cs53l30->supplies);
+	return ret;
+}
+
+static void cs53l30_i2c_remove(struct i2c_client *client)
+{
+	struct cs53l30_private *cs53l30 = i2c_get_clientdata(client);
+
+	/* Hold down reset */
+	gpiod_set_value_cansleep(cs53l30->reset_gpio, 0);
+
+	regulator_bulk_disable(ARRAY_SIZE(cs53l30->supplies),
+			       cs53l30->supplies);
+}
+
+#ifdef CONFIG_PM
+static int cs53l30_runtime_suspend(struct device *dev)
+{
+	struct cs53l30_private *cs53l30 = dev_get_drvdata(dev);
+
+	regcache_cache_only(cs53l30->regmap, true);
+
+	/* Hold down reset */
+	gpiod_set_value_cansleep(cs53l30->reset_gpio, 0);
+
+	regulator_bulk_disable(ARRAY_SIZE(cs53l30->supplies),
+			       cs53l30->supplies);
+
+	return 0;
+}
+
+static int cs53l30_runtime_resume(struct device *dev)
+{
+	struct cs53l30_private *cs53l30 = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(cs53l30->supplies),
+				    cs53l30->supplies);
+	if (ret) {
+		dev_err(dev, "failed to enable supplies: %d\n", ret);
+		return ret;
+	}
+
+	gpiod_set_value_cansleep(cs53l30->reset_gpio, 1);
+
+	regcache_cache_only(cs53l30->regmap, false);
+	ret = regcache_sync(cs53l30->regmap);
+	if (ret) {
+		dev_err(dev, "failed to synchronize regcache: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops cs53l30_runtime_pm = {
+	SET_RUNTIME_PM_OPS(cs53l30_runtime_suspend, cs53l30_runtime_resume,
+			   NULL)
+};
+
+static const struct of_device_id cs53l30_of_match[] = {
+	{ .compatible = "cirrus,cs53l30", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, cs53l30_of_match);
+
+static const struct i2c_device_id cs53l30_id[] = {
+	{ "cs53l30", 0 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, cs53l30_id);
+
+static struct i2c_driver cs53l30_i2c_driver = {
+	.driver = {
+		.name = "cs53l30",
+		.of_match_table = cs53l30_of_match,
+		.pm = &cs53l30_runtime_pm,
+	},
+	.id_table = cs53l30_id,
+	.probe_new = cs53l30_i2c_probe,
+	.remove = cs53l30_i2c_remove,
+};
+
+module_i2c_driver(cs53l30_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC CS53L30 driver");
+MODULE_AUTHOR("Paul Handrigan, Cirrus Logic Inc, <Paul.Handrigan@cirrus.com>");
+MODULE_LICENSE("GPL");