Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 253 insertions, 0 deletions

diff --git a/sound/soc/codecs/rl6231.c b/sound/soc/codecs/rl6231.c
new file mode 100644
index 000000000..d1fc17064
--- /dev/null
+++ b/sound/soc/codecs/rl6231.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * rl6231.c - RL6231 class device shared support
+ *
+ * Copyright 2014 Realtek Semiconductor Corp.
+ *
+ * Author: Oder Chiou <oder_chiou@realtek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <linux/gcd.h>
+#include "rl6231.h"
+
+/**
+ * rl6231_get_pre_div - Return the value of pre divider.
+ *
+ * @map: map for setting.
+ * @reg: register.
+ * @sft: shift.
+ *
+ * Return the value of pre divider from given register value.
+ * Return negative error code for unexpected register value.
+ */
+int rl6231_get_pre_div(struct regmap *map, unsigned int reg, int sft)
+{
+	int pd, val;
+
+	regmap_read(map, reg, &val);
+
+	val = (val >> sft) & 0x7;
+
+	switch (val) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+		pd = val + 1;
+		break;
+	case 4:
+		pd = 6;
+		break;
+	case 5:
+		pd = 8;
+		break;
+	case 6:
+		pd = 12;
+		break;
+	case 7:
+		pd = 16;
+		break;
+	default:
+		pd = -EINVAL;
+		break;
+	}
+
+	return pd;
+}
+EXPORT_SYMBOL_GPL(rl6231_get_pre_div);
+
+/**
+ * rl6231_calc_dmic_clk - Calculate the frequency divider parameter of dmic.
+ *
+ * @rate: base clock rate.
+ *
+ * Choose divider parameter that gives the highest possible DMIC frequency in
+ * 1MHz - 3MHz range.
+ */
+int rl6231_calc_dmic_clk(int rate)
+{
+	static const int div[] = {2, 3, 4, 6, 8, 12};
+	int i;
+
+	if (rate < 1000000 * div[0]) {
+		pr_warn("Base clock rate %d is too low\n", rate);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(div); i++) {
+		if ((div[i] % 3) == 0)
+			continue;
+		/* find divider that gives DMIC frequency below 1.536MHz */
+		if (1536000 * div[i] >= rate)
+			return i;
+	}
+
+	pr_warn("Base clock rate %d is too high\n", rate);
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(rl6231_calc_dmic_clk);
+
+struct pll_calc_map {
+	unsigned int pll_in;
+	unsigned int pll_out;
+	int k;
+	int n;
+	int m;
+	bool m_bp;
+	bool k_bp;
+};
+
+static const struct pll_calc_map pll_preset_table[] = {
+	{19200000,  4096000,  23, 14, 1, false, false},
+	{19200000,  24576000,  3, 30, 3, false, false},
+	{48000000,  3840000,  23,  2, 0, false, false},
+	{3840000,   24576000,  3, 30, 0, true, false},
+	{3840000,   22579200,  3,  5, 0, true, false},
+};
+
+static unsigned int find_best_div(unsigned int in,
+	unsigned int max, unsigned int div)
+{
+	unsigned int d;
+
+	if (in <= max)
+		return 1;
+
+	d = in / max;
+	if (in % max)
+		d++;
+
+	while (div % d != 0)
+		d++;
+
+
+	return d;
+}
+
+/**
+ * rl6231_pll_calc - Calcualte PLL M/N/K code.
+ * @freq_in: external clock provided to codec.
+ * @freq_out: target clock which codec works on.
+ * @pll_code: Pointer to structure with M, N, K, m_bypass and k_bypass flag.
+ *
+ * Calcualte M/N/K code to configure PLL for codec.
+ *
+ * Returns 0 for success or negative error code.
+ */
+int rl6231_pll_calc(const unsigned int freq_in,
+	const unsigned int freq_out, struct rl6231_pll_code *pll_code)
+{
+	int max_n = RL6231_PLL_N_MAX, max_m = RL6231_PLL_M_MAX;
+	int i, k, n_t;
+	int k_t, min_k, max_k, n = 0, m = 0, m_t = 0;
+	unsigned int red, pll_out, in_t, out_t, div, div_t;
+	unsigned int red_t = abs(freq_out - freq_in);
+	unsigned int f_in, f_out, f_max;
+	bool m_bypass = false, k_bypass = false;
+
+	if (RL6231_PLL_INP_MAX < freq_in || RL6231_PLL_INP_MIN > freq_in)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(pll_preset_table); i++) {
+		if (freq_in == pll_preset_table[i].pll_in &&
+			freq_out == pll_preset_table[i].pll_out) {
+			k = pll_preset_table[i].k;
+			m = pll_preset_table[i].m;
+			n = pll_preset_table[i].n;
+			m_bypass = pll_preset_table[i].m_bp;
+			k_bypass = pll_preset_table[i].k_bp;
+			pr_debug("Use preset PLL parameter table\n");
+			goto code_find;
+		}
+	}
+
+	min_k = 80000000 / freq_out - 2;
+	max_k = 150000000 / freq_out - 2;
+	if (max_k > RL6231_PLL_K_MAX)
+		max_k = RL6231_PLL_K_MAX;
+	if (min_k > RL6231_PLL_K_MAX)
+		min_k = max_k = RL6231_PLL_K_MAX;
+	div_t = gcd(freq_in, freq_out);
+	f_max = 0xffffffff / RL6231_PLL_N_MAX;
+	div = find_best_div(freq_in, f_max, div_t);
+	f_in = freq_in / div;
+	f_out = freq_out / div;
+	k = min_k;
+	if (min_k < -1)
+		min_k = -1;
+	for (k_t = min_k; k_t <= max_k; k_t++) {
+		for (n_t = 0; n_t <= max_n; n_t++) {
+			in_t = f_in * (n_t + 2);
+			pll_out = f_out * (k_t + 2);
+			if (in_t == pll_out) {
+				m_bypass = true;
+				n = n_t;
+				k = k_t;
+				goto code_find;
+			}
+			out_t = in_t / (k_t + 2);
+			red = abs(f_out - out_t);
+			if (red < red_t) {
+				m_bypass = true;
+				n = n_t;
+				m = 0;
+				k = k_t;
+				if (red == 0)
+					goto code_find;
+				red_t = red;
+			}
+			for (m_t = 0; m_t <= max_m; m_t++) {
+				out_t = in_t / ((m_t + 2) * (k_t + 2));
+				red = abs(f_out - out_t);
+				if (red < red_t) {
+					m_bypass = false;
+					n = n_t;
+					m = m_t;
+					k = k_t;
+					if (red == 0)
+						goto code_find;
+					red_t = red;
+				}
+			}
+		}
+	}
+	pr_debug("Only get approximation about PLL\n");
+
+code_find:
+	if (k == -1) {
+		k_bypass = true;
+		k = 0;
+	}
+
+	pll_code->m_bp = m_bypass;
+	pll_code->k_bp = k_bypass;
+	pll_code->m_code = m;
+	pll_code->n_code = n;
+	pll_code->k_code = k;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rl6231_pll_calc);
+
+int rl6231_get_clk_info(int sclk, int rate)
+{
+	int i;
+	static const int pd[] = {1, 2, 3, 4, 6, 8, 12, 16};
+
+	if (sclk <= 0 || rate <= 0)
+		return -EINVAL;
+
+	rate = rate << 8;
+	for (i = 0; i < ARRAY_SIZE(pd); i++)
+		if (sclk == rate * pd[i])
+			return i;
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(rl6231_get_clk_info);
+
+MODULE_DESCRIPTION("RL6231 class device shared support");
+MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
+MODULE_LICENSE("GPL v2");